I just reinstalled win 7 home premium edition onto my cpu and now i cant find my secondary hard drive. It shows up in my bios but not on my computer screen. NO I do not want to format this hard drive it has all my backed up files!!! Can anyone help me? A little more info: Before i redid my cpu the hard drive was a secondary that i had used bitlocker on to keep it password protected. I know my password but i do not see my hard drive and i NEED to get into this hard drive.
I'm doing a complete install from Vista Home Premium to Windows 7 Professional (apparently a simple upgrade isn't possible). But the installation never gets started, because when it asks me to select a drive to install to, the list is blank. It can't find my hard drive, and there's no way to direct it to do so.
This is odd, because Vista has always run perfectly for me, and I've never experienced any issues. All of my Windows updates and drivers are current, Microsoft Security Essentials is disabled, and still Windows 7 can't seem to find my C drive. Any suggestions?
I recently installed Windows 7 and it's been working fine but when I go to "computers" it does not display my secondary harddrive only my primary, how do I add it?
I have four internal hard drives C: D: E: and F: Starting last night Hard drive E: only shows up ever so often. Sometimes I have to reboot and it shows up but other times it doesn't. I have removed it and pressed it back in its slot to make sure there isn't just a bad connection. It's the same in Disk Management, E: is still missing there too. All the other hard drives are fine?
I bought a new custom PC from ebay, a shop called FreshTech Solutions, so when it arrived I tried installing Windows 7 Home Premium (came with it). Obviously I need to do a custom install, as I'm not upgrading from anything, but when I get to the screen where it asks where I would like to install Windows 7, nothing is listed. I've tried loading from the disc that came with the motherboard, the Windows 7 CD itself, even the C drive (said it needed to format it, but couldn't).
Got a new computer today, plugged in my old 500GB hard drive for back up storage. I went into it, can see everything fine, go through the program files, etc...Except I can't find my old documents, pictures, or anything that was saved on my desktop. A search won't even bring it up. How the heck can I get it back?
I am running windows 7 home 64 bit (build 7600). I have a gateway fx7026. It has two internal hard drives. When I look under device manager they are both listed and they are both listed under the bios menu. When I look in my computer though under hard disk drives it only shows the one that I have the OS on. When I had Vista it showed both of them. Is this something I should be worried about. The drives are listed as WDC WD3200AAJS-22B4A0 DRIVE 1 and WDC WD3200AAJS-22B4A0 DRIVE 0.
After restart it sometimes does not find the primary hard drive. The error pops up from time to time. Sometimes from browsing the web, downloading or playing a game. It even pops up while I`m not doing anything at all. I did a checkdisk and it turned out clean.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
the installation didnt find any driveits seems like i need to load driver to find the hard drive but i didnt find...for xp i used the MB driver calld "asrock 775Twins-HDTV"
Recently my wife caught a virus on her computer (HP touchsmart windows 7 home premium). Your typical virus program that sends hundreds of pop up screens and says click this for full removal, blah blah blah. Anyways I used malwarebytes to see if the program could be removed, malwarebytes found 5 problems and I removed them. Afterward I noticed that there were no icons on the screen, I tried to bring up task manager and the computer rebooted. once the computer rebooted, there was a black screen with "no operating system found".
I tried the "repair your computer" option on the Windows 7 disk, but it was not able to repair the problem automatically, I also tried some manual command scan prompts that I found on the net. None of this has worked so far.
I figured that I would take the hdd out of her computer and dock it to another computer. The hard drive connected fine, but when I tried to open it there was nothing in there. I tried to make sure that all files were not hidden (they weren't). Funny thing is when I click on properties for the drive it shows that the drive is 2/3rds full but I can't see any files or information when I try to search the drive. I also just tried copying the hard drive to another harddrive and it was copying files but once I opened the new location, it was still empty (even thought the folder said in properties 84 gigs).
Is there something that I am missing, I would like to retrieve all of her documents, pictures etc. then I could reformat that drive and re-install windows if I can not get it to boot back up correctly.
Last week i had my system crash in that i have lost all my partition disk data's. After that i have re installed my OS and re recreate a partition disk also. For my data's i try to trace it by using recovery software. I got all my videos and documents and mp3 files. but i cannot able to find my photos in my system. I dont know what is the reason.
I was try to find some photos but every photos are showing invalid image.
for nearly every Sony Vaio model use the ASIAN Site they've even got hard to find stuff like the drivers for the Dual Sony MMC SDHC card reader.Original Drivers and Applications for VPCEH/EJ Series (Windows 7 64-Bit) Download: Sony Asia Pacific (Other models too.I was just chasing down stuff for a model I've been using). Forget about those VILE sites that sucker you in to "Free Driver Search" -- and when they find something you have to PAY to access the relevant area (We call this stuff "Sneakerware" and it's becoming more and more prevalent - they say FREE DOWNLOAD but that's all that's free is the Download.
I need to automatically add a key to the rooteneum subkey.I need to install a driver for an external device, it is not automatically detected by the system, because it is not inside of my pc.I am automating the installproccess of the device using cmdinf eg files.The driver will not install because it cannot find the hardware id, usually located at HKLMSYS TEMCurrentControlSetEnumRootImmageXXXX were XXXX are nubers.I tried devcon but it seems it lost it's function to add hardwarekeys when not pressent.
I am running windows 7 on my Toshiba Satellite laptop. I am try to connect a Western Digital 750GB internal SATA disk in an external enclosure via usb. I can find the drive in system management but not in my computer. If I put my pci adapter card in a desktop or tower, and hook the WD drive internally, it shows up right away. How can I get it to work via usb?
I have a HP Probook 4530swith Windows 7 Home Premium 64 bit. When I turn on the PC the windows does'nt start and give a option of starting windows manually, which does'nt work, and repair windows. Repairing windows with windows 7I then decided to reinstall windows 7, but while installing, on the select disk page, it shows a error saying no drives found.I then performed a Hard Disk Test which resulted in failure saying:Failure ID : UC7WX0-5NB67S-XD6V5G-60TF03
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
