Cannot Access Network Location %PUBLIC%Desktop
Nov 21, 2011I'm trying to open and download apple, itunes. I've downloaded the program and its giving me a cannot access network location %PUBLIC%Desktop. ive also found a microsoft
View 5 RepliesI'm trying to open and download apple, itunes. I've downloaded the program and its giving me a cannot access network location %PUBLIC%Desktop. ive also found a microsoft
View 5 RepliesHow to Set the Windows 7 Network Location Type ?
View 0 Replies View RelatedI'm reimaging one of my home systems that I intend to use as a "sterile" system (I will visit very a very limited selection sites on it, such as banking sites). I'm considering establishing the network location as "Public" instead of "Home", rationale being this would help prevent cross infection from other computers on my home network if they get a worm or virus. I do have friends that come over and hop on my network sometimes and who knows what contamination their systems have. Is this being overly paranoid? Will it cause annoying problems for this sterile system or other systems in my home network? I don't intend to share anything on this system with other computers on my home network. Seems to me that this ought to be the recommended setting for any computer always ... you can always share files using a USB drive if you really need to. Thoughts? Again maybe I am being overly paranoid. Back in the day there used to be worms that would look for ways to hop from system to system over the network, maybe that's much much harder these days. I do have a router between the DSL modem and my home network and I do run Norton Internet Security on all my systems?
View 2 Replies View RelatedI have been using my home internet in my new place for a couple of weeks fine, yesterday morning when I tried it it had the limited access yellow triangle and wouldn�t connect.I reset the router and connected to the wifi on my iphone which worked fine, I checked the DNS numbers were the same as on my iphone which they were and I had not changed any settings. I spent the entire day yesterday online looking for solutions, I�ve reset the adapter, disabled it etc, set the ip and dns to automatic and back again etc etc.
When my wifi tries to connect to my home internet it takes a LONG time to identify and then identifies it either as an unidentified network and/or public. Even when I change it to home it changes it back to public or just doesn�t let me change it to home and says try again later.
Ps- I just tried disabling then re-enabling the protocol 6 on the wifi which isn�t working and it just said �in order to configure TCP/IP, you must install and enable a network adapter card. But then it just let me configure it and is still connected but with limited access and public network.
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
error 606 cant access netwok location this is driving me nuts most programs when I try and load them in this comes up ...
I download the fix that w suggested but no change does anyone know how to fix this via regedit I cant even update word
I have a solid state drive with limited capacity so I would like Public folders to be on another hard drive. I'm able to change the location of the regular My Documents, My Pictures, etc. to the other drive but not the Public folders. Its curious because when I open up the properties for these Public folders it shows the existing location and there is a note saying you can change the location ..., but there is not a move button nor can you change what is listed in the location text box. So how do you change the location?
View 1 Replies View RelatedI have two network cards in my PC. One of them connects to the internet while the other connects to my home network.
The issue is enabling public folders for the home network in "Network and Sharing Center" enables public folders for the public network also. In other words Windows grants permission to people on the internet to access my c:usersPublic folder.
Disabling public folders under public network settings disables public folders for the home network also, preventing people on my local area network from accessing my PC.
[URL]
In other words Windows grants permission to people on the internet to access my c:usersPublic folder.
I am having an intermittent problem isnalling different programs in Windows 7. I will get the following error message when the insall fails "Error 1606. Could not access network location %AppDATA%." When I got this error before I was able to get around it by crated another administrator account in Windows to install programs. Since then I have did a clean install of windows and the issue went away until several months ago. So far the programs that I cant install are Java updates, and Quickbooks Starter Edition. Below you will find some basics about my PC.
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
[Code].....
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
Now then I see someone has posted a similar issue to mine but his seems more technical than mine. What's the issue you ask? I have a laptop that is running windows 7 and can view the document folder on my vista desktop but when I try to access it, it restricts me saying I don't have access. I removed the password being required to access files. I took off the shared wizard thing on the folder I want to access (on the vista desktop) that was recommended by another user on the site.
I still can't access the files on that computer but i can access from the desktop the files on my laptop (windows 7) both are on the same workgroup but I don't know what else to do.
I went on a weekend trip and turned on my laptop in an airport and noticed that I lost some of my desktop icons. I am running Windows 7 Home Premium 64bit. I returned home and discovered that I was using my Public Desktop. I can not figure out how to get back using my admin desktop. When I search my user accounts I find that I have "Default", "Public" and "Ron" this is my admin account. That account now has two desktop folders in it, one folder has all of my previous files and folders and the other just has one file in it that I made while I was gone.
View 1 Replies View RelatedI have 2 HP laptops running Windows 7. I can access the puplic folder and printer sharing from the first laptop to the secound. When I try to access the puplic folder from the secound laptop to the first I get this error.As far as I know all my setting are correct in the 2 laptops. here is the screen shotts on the setting. and the other laptop all looks the same so I dont understand why its asking for passwords.
View 6 Replies View RelatedMy LAN (local area connection) is automatically on a Public network, I'm not sure why or if its always been like this. My Broadband is on home. I cant change the LAN to home. A message popped up and said something along the lines of "this network has too many internet connections".
I'm wondering what it means if my unidentified network is public and if there is anyway to change it to home?
I am having a problem connecting to the internet in a public library where all other laptop users are connecting successfully. The curious part of the connectivity issue (to me, anyway) is that according to my computer I AM connected to the network. I have provided some screen caps of the issue (links below), and tried to run the Intel ProSet Wireless Tools diagnostic to troubleshoot the problem of connectivity. The test run by my computer indicated that my Ping Test failed Response: Default Gateway, DHCP server No Response.
View 3 Replies View RelatedBesides using a VPN connection when using a public WIFI, what other precautions should I take?Let's say I'm connected to the WLAN but not surfing the net, is Windows firewall enough to protect me?
View 3 Replies View Relatedi have a little problen here i need to switch from public network to home and i cant seen to be able to due
View 1 Replies View RelatedUnder "Advanced sharing settings", one can really turn off a lot of network sharing features to secure a computer.The "Public folder sharing" switch allows one to turn off Public folder sharing, but people logged on to "this" computer can still access these folders. Does anyone know if this means *remote* login? If so, is there a way to deactivate this so that it is only accessible at the "console"? And by Public folder, does that mean a folder that is user-specific (and controlled by owning user), but open to the public? Or does it mean a file space "commons", accessible and controlled by all users?The "Password protected sharing" switch allows one to restrict access to the computer to only those who have an account and password on the computer. Again, is there a way to ensure that access is only possible from the console?
View 7 Replies View RelatedSo I have fibre optic broadband and I connect my PC and Xbox 360 together through my PC motherboard LAN connections.To explain what I have done is I have two LAN connections on my EvGA 680i motherboard and I have bridged out these two ports because I find it is is easier connecting the Xbox this way as I don't have to deal with the firewall issues and programme each file to access it and it is just smoother with no dropouts.The problem that I have though is as soon as I start up the Xbox 360 then my PC and any other laptop has this issue.Firstly the two laptops connect wirelessly.As soon as the Xbox fires up firstly it switches on my partners HP DV6000 laptop and this might be because it is a media laptop and has an infra red remote which perhaps frequencies are crossing. I can live with this.The issue is the network.Both my PC and the laptops automatically switch from a homegroup to a public network.
My PC is fine if I reboot, it will revert back to the homegroup but my partners laptop will not. It stays on this public network and so she can't access the internet.I have tried changing and managed to change back to a homegroup but it is confused in that it does not know which homegroup to connect to.I have typed in the WPA code but it does not appear to recognise this as our network.Is it because I have bridged the LAN ports and it is confusing Windows?All are using Windows 7. PC and HP laptop are Ultimate and other laptop is Professional.
I posted a reply on a similar topic but figured I'd start a new thread even though it seems this has been discussed a lot.I have a verizon wireless cell access point I connect a w7hp pc to it and set it as a home network. I also have a nic in the same w7hp box connected to a local 10/100/1g switch with a bunch of other stuff on it, an xp pc, a ps3, a directtv dvr, and a majicjack. That's my home LAN.I'm letting the w7hp machine do the dhcp as part of internet connection sharing which mostly works fine. I had to hard set an ip address for the dvr. There's even a registry entry that you can control the dhcp local subnet.What I'm finding is that with windows 7 home premium even though you can share an internet connection there is no way to change an independent home LAN network to be a "home" location.
Because w7hp decides the home LAN is "unidentified" it won't let you change the type and it's stuck as a "public" network. So none of your home computers can talk to the windows 7 computer. They can use the internet but that's about it.here's a lot of fixes floating around but none seem to correctly fix the problem.It's not a problem if you have w7pro because you can edit the security settings forunidentified networks and let the admin change them. But I can't even find the security registry entries in w7hp.
Since xp the same ol' same ol'. Why after trouble shooting and getting access to my network folders does windows ALWAYS revert back to inaccessibility? You get it working for a short time and then it goes back to not being able to transfer simple files. This has been driving me nuts for years.
Two os's Windows 7 64 to and from 32bit could transfer files for about a week.
I have been using Windows 7 for about a month now and two days ago i started to have network problems.
I cannot connect to the Internet or my network and keep getting messages saying that the network cable is unplugged when it is not. After a while i was able to get a different message and the computer connects to an unidentified network and when i troubleshoot this it tells me i have an invalid IP address.
I know the problem has got nothing to do with the hardware or my Internet. I have tried 2 other router's & another modem with different Ethernet cables with no luck but my network/Internet is working fine on my laptop which is also Windows 7.
I had problems with my computer not connecting to the network sometimes after restarting my computer. That was usually fixed by simply unplugging and replugging into my outlet. I have a hard wire connection and my ethernet cable gets plugged into the wall and connects to the modem/router (whichever it is) from there. After I reset my computer this morning though, my computer has absolutely refused to connect to the network. I've tried resetting the router/modem and unplugging and replugging in my Ethernet cable. I noticed however in the network center it showed me connected to Network 8 (my standard home connection) for a few seconds but then it changes to unidentified public network and breaks connection to the Internet. Wireless is working fine and I'm infact typing all this on my iPhone 4.
View 1 Replies View RelatedI can�t get online. Icon in taskbar says I don�t have a network connection. Upon exploring, I find that Windows 7 Pro has me setup for a �public network��which has a yellow exclamation mark on the left side between my PC and the network, and a red X on the right side between the network and the Internet.
DETAILS:Dell desktop PC. Was running Windows 7 Home, now running Windows 7 Pro (full install; not upgrade). I had a malware problem (images on webpages and links, etc. were not visible to me) with W7Home; cleaned it and went to W7Pro. However, now I have this whole new and far worse problem with W7Pro. (See �problem� above.) NOTE: I am the only person in my house and the only person using the computer. So I never had it set up for a network. I only own the desktop PC and don�t need a network. The �network� that is now set up on my computer was set up by W7Pro by itself as part of the problem. My IP is not static so I can�t input my IP manually�it�s set to automatically detect. Called cable modem service provider; they made the assumption my operating system came with my PC and told me to call Dell for support. When I explained my OS didn�t come with the PC, they then said �You need to talk to Microsoft.� Uh---no. The cable modem service provider said their server is talking to my PC�my PC is unable to get to them. (Makes sense, as that matches the pictures I�m seeing with the exclamation mark and red X.)
I was on my laptop on Friday and the internet would connect when I turned on my laptop. So I just thought I needed to retype the security key. Nope. So after that I reboted my router. (Sorry for my horrible spelling). That didn't work either. So I came here and saw a number of people had the same problem. I tried every thing pluging my laptop into the router, netsh winsock reset, disable and enable the network.
View 4 Replies View RelatedI am running Windows 7 x64 Ultimate on my desktop (home) and Windows 7 x64 Pro on my laptops. I bring my personal laptop to work which I use for emails and browsing. There is sensitive information that I would not like to share for obvious reasons. I am running into a problem making sure the information is not in "shared" mode while at work.
Work has their own network, which I am unable to connect to because the Sys Admin is lazy and will won't provide me a VPN connection directly to the system. So what I have done is use the public WiFi that we make available to our customers and connect through my own VPN off the public WiFi system. I want to make sure that I am not inadvertently sharing documents or other information doing so. When I connect to the network at work I use the "Public" setting.
What makes it more difficult is I have a similar situation at home, in which we have one internet connection through a router coming in and several people use the system. The location of the router is actually upstairs where I do not have access to, I use a Netgear WNR2000 v2 (I rent out rooms in my house), so I am forced to connect to the router wireless.
I personally am not a gamer, but one of the tenants is. I almost always use my VPN service at home to connect, but I am unsure if this is the correct set-up. I don't want to share my printers, video, etc. with everyone in the house. I am using Norton 360 for protection with Firewalls and Anti-virus software. I connect through Golden Frog VPN service for security.
I am going to connect my desktop Gigabit switch with my devices but again want my system secure, but not limited because of my situation. It is safe using the router for access and then creating this "sub-network" for my devices (for the router I am the admin)? Is there a better method or suggestion that one might have. I would really appreciate the input for this complicated matter. Should I change my workgroup for home and work? Currently its the default WORKGROUP domain for both.
I am using Windows 7, when I startup I get my network and a public network with no internet availiable. I only get internet access when I disable and then re-enable my network connection. I have tried to disable this public network permanently, but without success as the same problem occurs after reboot.
View 8 Replies View RelatedWhen I insert a USB flashdrive, I receive error message "Location is not available. G: is not available.Access Denied".I can see the drive(s) in explorer, and I'm the Administrative User with full permissions, but it keeps telling me I can't access/use the USB prorts.
View 6 Replies View RelatedFor some unknown reason i have come to my computer and whenever i click on the C: My computer or any icon on my desktop or try and edit any file (delete etc) i get the pop up message C: is not accessible access is denied Location is not available.I thought this might have something to do with user accounts however I am the only user and administrator of the laptop and have all wrights, box's ticked.
View 3 Replies View RelatedDownloaded a video converter specifically Doremisoft Video COnverter Trial 4.4.3..when I was about to run the program a box pops up: Unable to load DLL 'ttsPlayerDll.dll': Invalid access to memory location. (Exception from HRESULT: 0x800703E6) with the ff details below: [code] When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 2 Replies View RelatedMy first post and an issue that recently started and I can't seem to figure it out. When I do a save as file and I click on Desktop on the side bar it will save it to my desktop in System32/config/desktop instead of user/desktop. If I save a file instead of save as it will go to my normal desktop under user/desktop. Is there a setting somewhere to change the default desktop back to user?
View 2 Replies View Related