Switch From Public Network To Home?
May 2, 2011i have a little problen here i need to switch from public network to home and i cant seen to be able to due
View 1 Replies
ADVERTISEMENT
Windows Network Location: Public Versus Home At Home?
Jun 12, 2011I'm reimaging one of my home systems that I intend to use as a "sterile" system (I will visit very a very limited selection sites on it, such as banking sites). I'm considering establishing the network location as "Public" instead of "Home", rationale being this would help prevent cross infection from other computers on my home network if they get a worm or virus. I do have friends that come over and hop on my network sometimes and who knows what contamination their systems have. Is this being overly paranoid? Will it cause annoying problems for this sterile system or other systems in my home network? I don't intend to share anything on this system with other computers on my home network. Seems to me that this ought to be the recommended setting for any computer always ... you can always share files using a USB drive if you really need to. Thoughts? Again maybe I am being overly paranoid. Back in the day there used to be worms that would look for ways to hop from system to system over the network, maybe that's much much harder these days. I do have a router between the DSL modem and my home network and I do run Norton Internet Security on all my systems?
View 2 Replies View RelatedNetwork Constantly Changing Between Unidentified Public Network And Home
Aug 30, 2012Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
Network Location - Set As Home, Work, Or Public Network
Jan 14, 2010How to Set the Windows 7 Network Location Type ?
View 0 Replies View RelatedHome-group Changes To Public Network?
Jan 8, 2012So I have fibre optic broadband and I connect my PC and Xbox 360 together through my PC motherboard LAN connections.To explain what I have done is I have two LAN connections on my EvGA 680i motherboard and I have bridged out these two ports because I find it is is easier connecting the Xbox this way as I don't have to deal with the firewall issues and programme each file to access it and it is just smoother with no dropouts.The problem that I have though is as soon as I start up the Xbox 360 then my PC and any other laptop has this issue.Firstly the two laptops connect wirelessly.As soon as the Xbox fires up firstly it switches on my partners HP DV6000 laptop and this might be because it is a media laptop and has an infra red remote which perhaps frequencies are crossing. I can live with this.The issue is the network.Both my PC and the laptops automatically switch from a homegroup to a public network.
My PC is fine if I reboot, it will revert back to the homegroup but my partners laptop will not. It stays on this public network and so she can't access the internet.I have tried changing and managed to change back to a homegroup but it is confused in that it does not know which homegroup to connect to.I have typed in the WPA code but it does not appear to recognise this as our network.Is it because I have bridged the LAN ports and it is confusing Windows?All are using Windows 7. PC and HP laptop are Ultimate and other laptop is Professional.
Cannot Turn Off "Public Folder Sharing" For Public Network
Mar 28, 2012I have two network cards in my PC. One of them connects to the internet while the other connects to my home network.
The issue is enabling public folders for the home network in "Network and Sharing Center" enables public folders for the public network also. In other words Windows grants permission to people on the internet to access my c:usersPublic folder.
Disabling public folders under public network settings disables public folders for the home network also, preventing people on my local area network from accessing my PC.
[URL]
In other words Windows grants permission to people on the internet to access my c:usersPublic folder.
Public Networks And Home Group
Nov 30, 2009I am trying to connect to a home group in windows 7; However it says I must set my network to a public network on both computers first. I don't know what I am missing - but I am unable to find where to do this. If anyone can help by providing step by step on how to adjust my home network to 'public' - I am sure it something easy, but I just can't seem to find it.
View 7 Replies View RelatedHow To Change Public To Home Netwok
Jan 31, 2013how to change public to home netwok
View 2 Replies View RelatedLAN On Public Network
Dec 26, 2009My LAN (local area connection) is automatically on a Public network, I'm not sure why or if its always been like this. My Broadband is on home. I cant change the LAN to home. A message popped up and said something along the lines of "this network has too many internet connections".
I'm wondering what it means if my unidentified network is public and if there is anyway to change it to home?
No Connectivity To A Public Network?
May 4, 2012I am having a problem connecting to the internet in a public library where all other laptop users are connecting successfully. The curious part of the connectivity issue (to me, anyway) is that according to my computer I AM connected to the network. I have provided some screen caps of the issue (links below), and tried to run the Intel ProSet Wireless Tools diagnostic to troubleshoot the problem of connectivity. The test run by my computer indicated that my Ping Test failed Response: Default Gateway, DHCP server No Response.
View 3 Replies View RelatedWhat Precautions Should Take When Using A Public Network
Jan 15, 2013Besides using a VPN connection when using a public WIFI, what other precautions should I take?Let's say I'm connected to the WLAN but not surfing the net, is Windows firewall enough to protect me?
View 3 Replies View RelatedWindows 7 Public Network Profile?
Jun 13, 2011Under "Advanced sharing settings", one can really turn off a lot of network sharing features to secure a computer.The "Public folder sharing" switch allows one to turn off Public folder sharing, but people logged on to "this" computer can still access these folders. Does anyone know if this means *remote* login? If so, is there a way to deactivate this so that it is only accessible at the "console"? And by Public folder, does that mean a folder that is user-specific (and controlled by owning user), but open to the public? Or does it mean a file space "commons", accessible and controlled by all users?The "Password protected sharing" switch allows one to restrict access to the computer to only those who have an account and password on the computer. Again, is there a way to ensure that access is only possible from the console?
View 7 Replies View RelatedWindows 7 HP Unidentified Network Is Public?
Jan 24, 2012I posted a reply on a similar topic but figured I'd start a new thread even though it seems this has been discussed a lot.I have a verizon wireless cell access point I connect a w7hp pc to it and set it as a home network. I also have a nic in the same w7hp box connected to a local 10/100/1g switch with a bunch of other stuff on it, an xp pc, a ps3, a directtv dvr, and a majicjack. That's my home LAN.I'm letting the w7hp machine do the dhcp as part of internet connection sharing which mostly works fine. I had to hard set an ip address for the dvr. There's even a registry entry that you can control the dhcp local subnet.What I'm finding is that with windows 7 home premium even though you can share an internet connection there is no way to change an independent home LAN network to be a "home" location.
Because w7hp decides the home LAN is "unidentified" it won't let you change the type and it's stuck as a "public" network. So none of your home computers can talk to the windows 7 computer. They can use the internet but that's about it.here's a lot of fixes floating around but none seem to correctly fix the problem.It's not a problem if you have w7pro because you can edit the security settings forunidentified networks and let the admin change them. But I can't even find the security registry entries in w7hp.
Public Folders On Network Become Inaccessible
Jul 1, 2012Since xp the same ol' same ol'. Why after trouble shooting and getting access to my network folders does windows ALWAYS revert back to inaccessibility? You get it working for a short time and then it goes back to not being able to transfer simple files. This has been driving me nuts for years.
Two os's Windows 7 64 to and from 32bit could transfer files for about a week.
Unidentified Public Network - Invalid IP Address
Aug 31, 2009I have been using Windows 7 for about a month now and two days ago i started to have network problems.
I cannot connect to the Internet or my network and keep getting messages saying that the network cable is unplugged when it is not. After a while i was able to get a different message and the computer connects to an unidentified network and when i troubleshoot this it tells me i have an invalid IP address.
I know the problem has got nothing to do with the hardware or my Internet. I have tried 2 other router's & another modem with different Ethernet cables with no luck but my network/Internet is working fine on my laptop which is also Windows 7.
Cannot Access Network Location %PUBLIC%Desktop
Nov 21, 2011I'm trying to open and download apple, itunes. I've downloaded the program and its giving me a cannot access network location %PUBLIC%Desktop. ive also found a microsoft
View 5 Replies View RelatedUnidentified Public Network And Internet Connection Lost
Jul 22, 2011I had problems with my computer not connecting to the network sometimes after restarting my computer. That was usually fixed by simply unplugging and replugging into my outlet. I have a hard wire connection and my ethernet cable gets plugged into the wall and connects to the modem/router (whichever it is) from there. After I reset my computer this morning though, my computer has absolutely refused to connect to the network. I've tried resetting the router/modem and unplugging and replugging in my Ethernet cable. I noticed however in the network center it showed me connected to Network 8 (my standard home connection) for a few seconds but then it changes to unidentified public network and breaks connection to the Internet. Wireless is working fine and I'm infact typing all this on my iPhone 4.
View 1 Replies View RelatedCan't Get Online; Windows 7 Pro Setup A Public Network & Lost LAN
Apr 9, 2012I can�t get online. Icon in taskbar says I don�t have a network connection. Upon exploring, I find that Windows 7 Pro has me setup for a �public network��which has a yellow exclamation mark on the left side between my PC and the network, and a red X on the right side between the network and the Internet.
DETAILS:Dell desktop PC. Was running Windows 7 Home, now running Windows 7 Pro (full install; not upgrade). I had a malware problem (images on webpages and links, etc. were not visible to me) with W7Home; cleaned it and went to W7Pro. However, now I have this whole new and far worse problem with W7Pro. (See �problem� above.) NOTE: I am the only person in my house and the only person using the computer. So I never had it set up for a network. I only own the desktop PC and don�t need a network. The �network� that is now set up on my computer was set up by W7Pro by itself as part of the problem. My IP is not static so I can�t input my IP manually�it�s set to automatically detect. Called cable modem service provider; they made the assumption my operating system came with my PC and told me to call Dell for support. When I explained my OS didn�t come with the PC, they then said �You need to talk to Microsoft.� Uh---no. The cable modem service provider said their server is talking to my PC�my PC is unable to get to them. (Makes sense, as that matches the pictures I�m seeing with the exclamation mark and red X.)
Internet Just Stopped Working, Unidentified Public Network
Jul 17, 2012I was on my laptop on Friday and the internet would connect when I turned on my laptop. So I just thought I needed to retype the security key. Nope. So after that I reboted my router. (Sorry for my horrible spelling). That didn't work either. So I came here and saw a number of people had the same problem. I tried every thing pluging my laptop into the router, netsh winsock reset, disable and enable the network.
View 4 Replies View RelatedSecured Network Configuration For Saving My Sensitive Data From Public
Sep 10, 2011I am running Windows 7 x64 Ultimate on my desktop (home) and Windows 7 x64 Pro on my laptops. I bring my personal laptop to work which I use for emails and browsing. There is sensitive information that I would not like to share for obvious reasons. I am running into a problem making sure the information is not in "shared" mode while at work.
Work has their own network, which I am unable to connect to because the Sys Admin is lazy and will won't provide me a VPN connection directly to the system. So what I have done is use the public WiFi that we make available to our customers and connect through my own VPN off the public WiFi system. I want to make sure that I am not inadvertently sharing documents or other information doing so. When I connect to the network at work I use the "Public" setting.
What makes it more difficult is I have a similar situation at home, in which we have one internet connection through a router coming in and several people use the system. The location of the router is actually upstairs where I do not have access to, I use a Netgear WNR2000 v2 (I rent out rooms in my house), so I am forced to connect to the router wireless.
I personally am not a gamer, but one of the tenants is. I almost always use my VPN service at home to connect, but I am unsure if this is the correct set-up. I don't want to share my printers, video, etc. with everyone in the house. I am using Norton 360 for protection with Firewalls and Anti-virus software. I connect through Golden Frog VPN service for security.
I am going to connect my desktop Gigabit switch with my devices but again want my system secure, but not limited because of my situation. It is safe using the router for access and then creating this "sub-network" for my devices (for the router I am the admin)? Is there a better method or suggestion that one might have. I would really appreciate the input for this complicated matter. Should I change my workgroup for home and work? Currently its the default WORKGROUP domain for both.
Home Network Set But Windows 7 Says Can't Join Homegroup, No Home Network
Oct 8, 20125 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
Home-group Not Seen On LAN With A Cisco Switch?
Aug 18, 2012I have 4 desktops, 2 laptops all running Windows 7 Ult. 4 X64, 2 X86. 4 satellite receivers, a WII and 2 PS3's all on line. I have the following setup for my network.I have a Thompson DC476 Docsys 3 plugged into a DR-615 which does the DHCP, which is plugged into a 24 port Cisco Catalyst 2950. Which feeds the rest of the house. Upstairs I have a 4 port Netgear as a dumb switch that does the wireless for the phones and a tablet and the WII.There are no real configs on the Cisco other than PORTFAST has been enabled and all ports are is switchport mode access on the default VLAN.The only way I can get the Homegroup to work is to plug all the PC's into the DR-615 and the Netgear while ensureing the Netgear is plugged into the DR s well. If they (PC's) are connected through the Cisco I loose the Homegroup. I can still see all end devices in Windows and access them as long as I've shared it out.
View 4 Replies View RelatedCan't Connect Directly To Wifi But Can Using IPhone As Hotspot - Limited Access, Changing It To Public Network Etc
Feb 8, 2012I have been using my home internet in my new place for a couple of weeks fine, yesterday morning when I tried it it had the limited access yellow triangle and wouldn�t connect.I reset the router and connected to the wifi on my iphone which worked fine, I checked the DNS numbers were the same as on my iphone which they were and I had not changed any settings. I spent the entire day yesterday online looking for solutions, I�ve reset the adapter, disabled it etc, set the ip and dns to automatic and back again etc etc.
When my wifi tries to connect to my home internet it takes a LONG time to identify and then identifies it either as an unidentified network and/or public. Even when I change it to home it changes it back to public or just doesn�t let me change it to home and says try again later.
Ps- I just tried disabling then re-enabling the protocol 6 on the wifi which isn�t working and it just said �in order to configure TCP/IP, you must install and enable a network adapter card. But then it just let me configure it and is still connected but with limited access and public network.
Network And Public Network
Nov 16, 2009I am using Windows 7, when I startup I get my network and a public network with no internet availiable. I only get internet access when I disable and then re-enable my network connection. I have tried to disable this public network permanently, but without success as the same problem occurs after reboot.
View 8 Replies View RelatedModem And Router Will Not Connect To Computer Only Shows Unidentified Network/public No Internet Access, Wired Connection
Nov 11, 2010For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
"unrecognized Network/public Network"
Dec 12, 2011I just got finished building a new PC and the network is locked saying "unrecognized network/public network" and I cannot change it. I do not connect to the internet and I also do not get an IP address from my router (DHCP, the address given to the adapter is a 169.x.x.x address. This PC is sitting on a small workgroup here at my office. I have tried to disable the adapter and re-enable, I have reloaded drivers from the original CD. Here are some specs on the hardware and software.
Windows 7 professional x64
Asus P7P55D-E LX motherboard
Intel I5 760 processor
8 Gb DDR3 1333 memory
No other software loaded at this time. This is a brand new build, after windows finished loading I loaded the drivers from the Asus CD provided for the motherboard.
Run One Network Switch Off Of Another Network Switch?
Feb 16, 2012i have a 20mt ethernet cable going from my router along my loft to my gaming room to which it plugs into a network switch with 6 sockets for devices.Can i run another switch off of one of the plugged in cables to split another cable into 6 ports?The reason i ask is i need ethernet connections the other side of the room and dont fancy running any more cables under the carpet as i already have 3 computers and a server networked under it as it is
View 4 Replies View RelatedConfiguring Second Managed Switch On Network?
Nov 30, 2012I would like to confirm that the settings I have are correct for a second managed switch I am adding to my network. DHCP I have disabled, IP address I have found one on the network unused (192.168.1.xxx), subnet mask is 255.255.255.0. The only thing I'm not sure about is the default gateway setting
View 3 Replies View RelatedWireless Switch Is On But No Network Available In Dell?
Jul 9, 2011In my laptop wireless switch is on but no network available in dell studio 1745
View 3 Replies View RelatedPlugging Into A Switch Disables Entire Network?
Mar 20, 2011I have a my HTPC plugged into a 5-port switch along with my Xbox 360, PS3, and U-Verse TV box. Naturally, all 5 ports are being used with line 1 going into my router. There are 3 other computers in my house plugged directly into my router.My problem is that my network ceases to work whenever I plug in the switch. I am neither able to access the internet or view any other computer on my network for file/printer sharing. Running ipconfig shows that I have no LAN/internet connection. If I unplug the switch and plug in the components individually, then everything works normally.I have tried 3 different switches but I am getting the same result. It is very inconvenient to have to manually unplug and plug in my various game consoles and TV box in order to enable them to access the internet.
View 9 Replies View RelatedFile Sharing Across A Home Network - The Network Path Was Not Found"
Aug 9, 2011I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.