I have a my HTPC plugged into a 5-port switch along with my Xbox 360, PS3, and U-Verse TV box. Naturally, all 5 ports are being used with line 1 going into my router. There are 3 other computers in my house plugged directly into my router.My problem is that my network ceases to work whenever I plug in the switch. I am neither able to access the internet or view any other computer on my network for file/printer sharing. Running ipconfig shows that I have no LAN/internet connection. If I unplug the switch and plug in the components individually, then everything works normally.I have tried 3 different switches but I am getting the same result. It is very inconvenient to have to manually unplug and plug in my various game consoles and TV box in order to enable them to access the internet.
My home network loses internet connection when Windows 7 is active.
I have three machines with XP, one Apple and my current laptop with Windows 7 all connecting to the internet through the same router. After about 5 to 10 minutes of Windows 7 running I lose internet for the entire network. I have been able to replicate this problem six times consecutively. The router will indicate that the internet connection is active, but it is not. If I reboot my laptop to XP I must also restart the router to regain the internet connection to the entire network. Also, all computers see the network as active and running properly even when there is no internet.
Windows 7 machine is a Dell Precision M6300 fully updated with necessary updates and drivers from windows update.
Router is a Westell VesaLink Model: 327W this a standard issue wireless router from Verizon DSL
I have reformatted and installed a minimal version of Windows 7 but have yet to stop this thing from maintaining its hold on my network. After some 20 hours a day for nearly a month, it has taken its toll on my family. My son's new laptop for Xmas is now infected too. We will fix that very soon tho. Please guide me on how to proceed with this laptop for now. They have already wiped out my bank account once.
i have a 20mt ethernet cable going from my router along my loft to my gaming room to which it plugs into a network switch with 6 sockets for devices.Can i run another switch off of one of the plugged in cables to split another cable into 6 ports?The reason i ask is i need ethernet connections the other side of the room and dont fancy running any more cables under the carpet as i already have 3 computers and a server networked under it as it is
I would like to confirm that the settings I have are correct for a second managed switch I am adding to my network. DHCP I have disabled, IP address I have found one on the network unused (192.168.1.xxx), subnet mask is 255.255.255.0. The only thing I'm not sure about is the default gateway setting
Whenever I switch user accounts the computer will start the switch and then lock up with a display message that says no signal on the monitor. It happens if the computer has been running for hours or only a couple of minutes. I have to shut the PC off and leave it off for 20-30 minutes. I can then restart and enter any user account. But if I try to switch user or logoff and pick a different user the whole cycle begins anew.
I have a bit of a weird problem; here's the whole story. For the sake of an easier explanation, let us call the PC's I have mentioned PC-A, PC-B and PC-C. So, I first had PC-A and PC-B installed (this was years ago), and the problem first started appearing right away; whenever I tried to transfer a file between the two PC's, that's size exceeded roughly 1 MB, PC-B shut down all connections (which means it lost LAN connectivity, and could therefore not connect to the internet (as the broadband is connected via LAN to the switch)). At first, I didn't think much of this, as the problem is easily avoidable by transferring files using a USB stick instead (Note that smaller files can still be sent without any problem, and the PC's even perform well in Games, when playing LAN). However, I decided to get a third PC (PC-C) up and running recently, and have correctly (as far as I can tell) installed the PC upstairs on a different switch, connected to the LAN and internet as well. However, now the problem has became a bit of a greater nuisance, as whenever I try to send files from PC-A to PC-C, PC-B locks itself down again (my guess is that this happens because the traffic is still being applied to the PC-A-to-PC-B switch, which then leads me to conclude that the problem is in the switch).
I have so far tried changing switches, changing the jack that PC-B is connected to in the switch, changing various options in the Network Adapter settings of PC-B and disconnecting and reconnecting PC-B to the network(both physically, by plugging the cable out and back in, and via the software, by enabling the LAN connection that PC-B is usually connected to as it disables itself after a while (it gets stuck on Enabling... when I try and do this)), and so far the only way to get PC-B's networking working again, is by rebooting the PC itself.Please also note, that I am able to ping between all PC's before the file transfer, that the other two PC's do NOT need to reboot in order for their network to still function properly, that only files of a filesize of over ~1 MB cause this malfunction, that sometimes (I have yet to see a pattern of this occurring) PC-B CAN ping the other PC's but has a 50% packet loss average, and takes about 3k ms to get a single response, while the regular ping speed is <1 ms, and that transferring files over wireless networks (from PC-A to a laptop connected to the switch or broadband) does not seem to trigger this problem
Just installed 7100 and was setting up. I have a Toshiba HDTV on DVI (display numbered 1) and an Acer lcd on VGA (labeled 2). The acer is set as the primary display and all appears fine but when I'm not using the hdtv I'd like to turn it off and just use the lcd. When I turn off the hdtv I hear the sound for disconnecting hardware and the signal is cut off from the lcd putting it to sleep.
I tried the latest nvidia drivers (oh yeah, 8600GT) and it made the system super crashy with bsod's and everything. Can I disable plug and play, which I suspect is the problem, on just that monitor?
[code] Lately my DirectX 11 disables itself. I have to reboot to fix it. The last time it happened Aero was still working. I turned off Aero and turned it on again and it doesn't work. In dxdiag, DirectDraw, Direct3D, and Texture all are disabled. DDI Version also shows as Unknown. I restarted and all is fine. I have had Windows 7 for about a month now and this has only happened the past 1-2 weeks. My ATI drivers are from Asus and are 8.703.Is there any other information I should look for and post?
SPDIF used to work flawlessly with WMC7 and Intel G620 integrated graphics. I only needed to set the SPDIF as default in the Via HD panel.Since installing an HD 6450 video card I have to re-select this option everyday, or more if the HTPC stays in sleep mode for a long time. In fact the HTPC is always on & just goes to sleep when not used.The other day I found an SPDIF setting in Control Panel > Sound and made it the default, but that made no difference.
I use windows 7.When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.
I'm running Windows 7 on a Compaq Presario CQ56.I've been having trouble with the multiple display settings changing on their own on my laptop. I've never had an external monitor hooked into my laptop, but for the past week or so my laptop will give me a notification that an external monitor has been plugged in, then it will disable though nothing has been change. I havan't downloaded anything recently besides windows updates.
I use a screen magnifier/reader,it doesn't allw aero to function because it uses the graphics card,a known mirrored driver issue,not fixable at this time.So I would like to either disable aero altogether so I can use a black theme,or use the built in windows7 basic theme but with black instead of the default colour.
I know I can shut off aero peak and aero shake but how do I shut all of aero off,other than using the Windows 7 basic theme,and that is why I asked about changing the colour in the basic theme.I hope that makes sense.
I have been running happily with an All in One Medion desk top, which I have modified slightly. It is really a notebook chip based system, only two sata outputs, but it does have a touchscreen and digital tuner. It is a 2.3Ghz Pentium dual core. 4 GB mem and 1.5 TB over two drives.
I pulled the DVD drive out of sata 2 port and fitted it in an external housing on a USB port. Then I wired the sata 2 port out via an eSata socket to a sata HDD docking station.
I have been running six months with two versions of Win 7 Home premium 64bit in dual boot mode with no probs. Last week I decided to replace the 64 bit with a 32 bit version so as to run some older programs.
So I formatted the external 1TB drive and loaded win 7 32x from the original disks. Took while with all the updates and SP1.
While doing this, I had no problem with the DVD drive but, as soon as I was up and running, the DVD drive stopped reading disks. Swap boot back into Windows 7 64 bit and it is fine, boot from Windows 7 32 bit and it is a dodo. It recognises the drive ID but will not open a file or boot from a bootable disk. I have checked for out of date or missing drivers but nothing shows.
I suspect I have a protocol problem, Not sure. It appears to be using a new Windows 7 sp1 driver. Or maybe something wrong in Global settings.
So I've had sudden trouble with my webcam in the last two days, which is kind of irritating because I rely on it a lot. Specifically, when I try to activate my webcam, Windows disables the USB controller its connected to, reporting "Windows has stopped this device because it has reported problems. (Code 43.)" I've tried the webcam on another computer and had no problems. Disabling/reenabling doesn't do anything, neither does using a different USB port. I've tried the other solutions I've found online, including running the Hardware troubshooter, taking the battery out of my laptop, and unplugging the power for a couple of hours. I've removed the USB controllers, and restarted my computer.
I have a desktop PC running W7x64 for which I rely on my Alfa AWUS036H wireless USB adapter for an internet connection.
Windows 7 has a feature that seems to detect whether I turn off my monitor or not (for one reason, I know this because it makes a noise when I turn it on or off). When I turn my monitor off, my internet is disabled for some reason. I would like it to stay enabled so that I can download files and keep other active connections while the monitor is switched off.
I can verify that the indicator light on the USB adapter turns off when the monitor turns off and that the wireless utility that controls the device senses no device is present (i can see this using my secondary monitor, behavior only occurs when primary monitor is turned off).
Does anyone know how to disable this from happening? I have tried both turning off "Selective USB Suspend" and unchecking the "Allow computer to turn this device off" in the properties of the wireless adapter in device manager.
I'm having a bit of a conundrum. My Toshiba touchpad has developed a bad habit of disabling itself at random.The device is listed as a Synaptics Touchpad V7.2.I'll be typing along, or moving the mouse, or just doing nothing at all (waiting for a download to finish, for instance) and the mouse will become suddenly disabled. The only way to get it back is by pressing FN+F9 or sometimes to press the enable/disable button immediately above the mouse. I know I'm not pressing either of these by accident when the mouse turns off.When this happened, I took it as a sign that it was time to reformat the hard drive and start fresh. Even during the Windows installation, the mouse continually disabled itself. After installing the Toshiba Value Added Package and the Synaptics driver, the only change is that now I can see a big icon in the center of the screen alert me when the state of the mouse switches from enabled to disabled.
I'm noticing now too that it's not just disabling itself. If I don't re-enable the mouse right away, it will renable itself after a few moments. This can happen as much as once every few seconds and makes getting any real work done impossible.
I just got a new laptop (Lenovo G770) and am busy configuring Windows on it. I am running into an annoying issue with my input devices. Whenever I type or do anything with my keyboard, it disables my touchpad for about half a second. Since I am an avid user of keyboard shortcuts, this is highly annoying and is messing with my productivity. I can't figure out how to turn it off--when I search for answers I just see lots of threads from people having the opposite problem, who want to disable their touch pad while typing. I currently have the Synaptic driver installed controlling my touch pad, and I can't see any options in its settings to disable this "feature".
Starting last night my Dlink DWA-130 is causing all of my rear usb ports to not work. If I plug it into the front the computer doesn't even recognize it. I have tried using different ports on the back with the same result. I have even reinstalled Windows and the problem is still there.
Not Sure if this helps but... My Computer: mobo: AsRock 970 Extreme 3 processor: Fx 4100 gpu: Radeon hd 6570 PSU: Inland Silver Series ILS-600-2 600 Watt OS:Windows 7 Ultimate x64
When running Kubuntu in Sun VirtualBox it disables Windows audio devices. Only way to re-enable audio seems to be reboot. When running Ubuntu, it's OK. No problems with Windows devices. Both Kubuntu and Ubuntu v. 9.04.
I like KDE more than Gnome, that's the reason for Kubuntu.
I recently bought Windows 7 and installed a new RAM(my old was 2gb RAM) and upgraded to 4gb....so heres the problem,Sometimes when i plug something in my USB ports my computer randomly shutsdown..mostly after 30mins or so..
I will preface all this with I am not particularly knowledgeable regarding computer stuff, but am willing to learn!OK I've been having a problem, similar to some other posts, where Windows Explorer (not internet explorer) seems to spontaneously stop responding. When it does, I can restart windows explorer and it always says "windows is checking for a solution" but never finds anything. Whenever this happens, which can be as often as every 5 minutes, it inexplicably disables my wireless adapter (belkin wireless g usb) which occasionally decides to not respond and not turn back on
I have recently been granted admin rights on my work computer.While the computer was locked down, the Aero visual effects were set to "adjust for best performance".I can change it to "adjust for best appearance" and the Aero effects appear - until I reboot the computer. After the reboot, the checkbox is still set to "adjust for best appearance" however, the effects are disabled. I have to change the setting, change it back to best appearance and hit OK. Then everything works again.The friend in IT who granted the admin rights told me that this is due to the group policy our company has set up - and that there is nothing he can do about it.I have checked gpedit and regedit but could not find any relevant entries.Do you have any idea how I could automagically adjust the settings back to best appearance after every reboot? I was thinking that if I cannot turn of the group policy myself, then maybe I could write some sort of script that changes to appearance settings for me (instead of me having to do it manually every time).
I run windows 7 home premium and this morning for no apparent reason when I plugged in my USB stick my computer blue screened, I tried restarting it and the same thing happened, I tested my usb on a different computer and it was fine, I tired both ports on my laptop and the same thing happened on both. The same thing happened when I plugged in a different usb stick, but the usb mouse and webcam work fine.
I am using Texas Instruments C5515 USB Stick DSP Development Kit. Although the device does not give any error with other PC's( Win 7 -x64), when I plug it to my PC(Asus N53S Laptop-Win7-x64) crash dump occurs. The .dmp file is attached to this mail.
When ever i plug my xbox 360 wireless receiver device, my pc gets the blue screen and restarts itself, when its unplugged, everything is fine and no crashes?My PC spec is Windows 7 pro 32 bit, e8500 3.5ghz, ATI 6850, 4gb RAM?
I just plugged my PSP into my desktop and suddenly most of my inputs(save monitors) stopped working. I took the psp out out and restarted my machine, but it would not power back on.Heres what i've done so far:I have attached this psp to this machine before with no problems. After doing the steps above, I am clueless as to what could be going on. also, my mobo power light is green(implying that power IS being run to the machine). So any ideas? please let me know any other info you might need, such as specs and whatnot if that makes any difference. As I said, normally with power issues its only a few things and I just really dont see plugging my psp into my box shorting out my on button or anything like that.
Ok so before this lag i used windows vista (worked fine) and now i use windows 7 and when i unplug and plug in my computer i get really bad lag and sometimes it disconnects me from my wireless network and reconnects me. Now this happens about 80% of the time and its mostly when im running a game.
Computer Specs:
Computer Name: Compaq Presario CQ50-142US
Mother Board: Winstron Model: 360B
Cpu: Intell(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
Ram: 3072 MBs
Graphics Card: Mobile Intel(R) Express Chipset Family
If you need any more info just leave a response saying so and ill post what i can.
