When running Kubuntu in Sun VirtualBox it disables Windows audio devices. Only way to re-enable audio seems to be reboot. When running Ubuntu, it's OK. No problems with Windows devices. Both Kubuntu and Ubuntu v. 9.04.
I like KDE more than Gnome, that's the reason for Kubuntu.
Any ideas?
I have an Echo MiaMIDI sound card for recordings, when i first installed it i had to disable my motherboards onboard sound through my bios before windows would use it. This has been fine for 2+ years.
Windows 7 (64 bit home premium) has suddenly started installing the "HD Audio Device Drivers". I dont understand this since I have all windows updates turned off. But when it installs these audio drivers it disables my Echo MiaMIDI card.
So i go to device manager and it shows the Echo card but says there is not enough resources to use it due to other drivers being used, and it lists the HD Audio Device being in use. So i uninstall it but moments after this Windows starts installing it again. It still says disabled in my bios. its driving me crazy because i cant use my sound card!
I've never used Linux and cannot figure out how to make it go away. Purchased Windows 7 Home online and tried to download it.Unfortunately I can't figure out how to run the installation... and now my computer won't even connect to wireless.
View 1 Replies View RelatedI was cleaning out some stuff in storage and ran across a Windows NT 4 Workstation CD (in original jacket). On a whim, I made an ISO of the CD and actually got it working under VirtualBox 4.0.6 running in Windows 7 x64 Ultimate w/SP1.
Windows NT 4 wouldn't recognize a 8GB virtual disk drive, so I made it 4GB with an assigned 1GB of ram and 32MB of video.
Total installation time was less than 15 minutes on a quad core w/8GB of ram.
The built in browser is Internet Explorer 2.0 It does require a valid CD-KEY to install NT Workstation 4, just in case you were wondering.
I have a couple of questions regarding the use of VirtualBox on win7 ultimate (64bit). I want to run WindowsXP (32 bit) as a guest so in regards to the installation/setup of the OS the following questions arise: 1a)Does VirtualBox "look" at the actual motherboard and peripherals, ie my gtx660 and asus p8z77-pro, or will it create generic video/mobo/audio/lan/wireless "hardware" for windowsXP to detect. If its "created" where/how do i get the drivers for this? 1b)Will running updates for WinXP (ie patches/hotfixes) or any of the other programs installs "mess" with how the virtualbox operates? 2a)In terms of creating the "storage" for the virtual OS. Should i have made a seperate partition exclusively for this virtual box? I have a 2TB HD which i have split into 1TB partitions when I installed win7. 2b)What happens when I end my guest session in virtualbox, after I install the OS and games? where does that data get saved? 3)I understand that when I run winXP through virtualbox, the ram I set aside in the setup will be unavail for my win7 to use (while i run virtualbox of course). I currently have 16 gigs or ram, should I just set the ram amt for winXP to the 4 gig max and leave 12 for Win7? or should i do some other amt? 4)Last, but most important, if i mess-up with the install of winXP or settings for the guest client, how much will it affect win7?
View 6 Replies View RelatedVirtualbox wich one to down load i have windows 7 home premium 64bit ,i would like to down load it so i can run windows xp ,question is after you down load it do you have to down load xp onit are does it do it automatic i do have three disc of xp home ,plus ,pro. they are reinstall disc off other computors .
View 1 Replies View RelatedI already have VirtualBox installed and I'm at the point where I need to get windows 7 installed on virtualbox. How the hell do I do this. Apparently I am missing something because dos says "Boot Fail" blah blah blah and that's as far as I am. Do I just make a boot disc and then use it some how? Do I need other software? Maybe some basic instruction on starting a new virtualbox session. I've tried looking for the boot.ini but I'm thinking it's hidden in dos.
View 1 Replies View RelatedI have a bit of a weird problem; here's the whole story. For the sake of an easier explanation, let us call the PC's I have mentioned PC-A, PC-B and PC-C. So, I first had PC-A and PC-B installed (this was years ago), and the problem first started appearing right away; whenever I tried to transfer a file between the two PC's, that's size exceeded roughly 1 MB, PC-B shut down all connections (which means it lost LAN connectivity, and could therefore not connect to the internet (as the broadband is connected via LAN to the switch)). At first, I didn't think much of this, as the problem is easily avoidable by transferring files using a USB stick instead (Note that smaller files can still be sent without any problem, and the PC's even perform well in Games, when playing LAN). However, I decided to get a third PC (PC-C) up and running recently, and have correctly (as far as I can tell) installed the PC upstairs on a different switch, connected to the LAN and internet as well. However, now the problem has became a bit of a greater nuisance, as whenever I try to send files from PC-A to PC-C, PC-B locks itself down again (my guess is that this happens because the traffic is still being applied to the PC-A-to-PC-B switch, which then leads me to conclude that the problem is in the switch).
I have so far tried changing switches, changing the jack that PC-B is connected to in the switch, changing various options in the Network Adapter settings of PC-B and disconnecting and reconnecting PC-B to the network(both physically, by plugging the cable out and back in, and via the software, by enabling the LAN connection that PC-B is usually connected to as it disables itself after a while (it gets stuck on Enabling... when I try and do this)), and so far the only way to get PC-B's networking working again, is by rebooting the PC itself.Please also note, that I am able to ping between all PC's before the file transfer, that the other two PC's do NOT need to reboot in order for their network to still function properly, that only files of a filesize of over ~1 MB cause this malfunction, that sometimes (I have yet to see a pattern of this occurring) PC-B CAN ping the other PC's but has a 50% packet loss average, and takes about 3k ms to get a single response, while the regular ping speed is <1 ms, and that transferring files over wireless networks (from PC-A to a laptop connected to the switch or broadband) does not seem to trigger this problem
I installed VirtualBox yesterday, and now have decided I don't want Windows Virtual PC anymore. I want to have a virtual XP machine in VirtualBox instead. Is there any way to convert the XP Mode file provided by Microsoft to a format usable by Virtual Box?
View 9 Replies View RelatedI installed VirtualBox yesterday, and now have decided I don't want Windows Virtual PC anymore. I want to have a virtual XP machine in VirtualBox instead.Is there any way to convert the XP Mode file provided by Microsoft to a format usable by Virtual Box?
View 1 Replies View RelatedSo I've had sudden trouble with my webcam in the last two days, which is kind of irritating because I rely on it a lot. Specifically, when I try to activate my webcam, Windows disables the USB controller its connected to, reporting "Windows has stopped this device because it has reported problems. (Code 43.)" I've tried the webcam on another computer and had no problems. Disabling/reenabling doesn't do anything, neither does using a different USB port. I've tried the other solutions I've found online, including running the Hardware troubshooter, taking the battery out of my laptop, and unplugging the power for a couple of hours. I've removed the USB controllers, and restarted my computer.
View 3 Replies View RelatedHow can I make a Virtual Machine of my laptop (running winXp) for Virtual-box.
I am using vmware converter to use it in my vmware workstation, but I would like to try Virtual-box.
Has anyone tried to install the new Ubuntu 9.10 with Sun VirtualBox on Windows 7 Professional. I had the previous version of Ubuntu working on the Sun VirtualBox but the new one doesn't. It just gets to a spot where it looks like i'm seeing the upper left hand corner of the screen magnified by %300 and in 8 colors.
View 2 Replies View RelatedI have an a6 3420m with 6520g graphics and I recently install windows 7 in virtualbox. However, I can't view it in fullscreen because it's using the generic drivers for the graphics. The best I can do is 1280x1024 even though my screen is 1600x900. I can't install the drivers off of the amd website because it can't detect my graphics hardware. This is my first time using virtualbox or anything like it.
View 2 Replies View RelatedI will preface all this with I am not particularly knowledgeable regarding computer stuff, but am willing to learn!OK I've been having a problem, similar to some other posts, where Windows Explorer (not internet explorer) seems to spontaneously stop responding. When it does, I can restart windows explorer and it always says "windows is checking for a solution" but never finds anything. Whenever this happens, which can be as often as every 5 minutes, it inexplicably disables my wireless adapter (belkin wireless g usb) which occasionally decides to not respond and not turn back on
View 4 Replies View RelatedInstalled VirtualBox with XP and Office 03 and used it several timesThen, yesterday it failed to allow me to copy / paste from my other (Windows7 Office ) environment.oday it simply fails with the messageRuntime error opening c:UsersHenryVirtualBox VMsvmxpvmxp.vbox for reading: 102 (File not found)I still have the downloaded file "VirtualBox-4.1.8-75467-Win.exe"Would very much like to avoid reinstalling VirtualBox, XP and Office03Is there possibly a way to get it from another source (BTW: it is not in my Recycle Bin)
View 1 Replies View RelatedJust installed 7100 and was setting up. I have a Toshiba HDTV on DVI (display numbered 1) and an Acer lcd on VGA (labeled 2). The acer is set as the primary display and all appears fine but when I'm not using the hdtv I'd like to turn it off and just use the lcd. When I turn off the hdtv I hear the sound for disconnecting hardware and the signal is cut off from the lcd putting it to sleep.
I tried the latest nvidia drivers (oh yeah, 8600GT) and it made the system super crashy with bsod's and everything. Can I disable plug and play, which I suspect is the problem, on just that monitor?
[code] Lately my DirectX 11 disables itself. I have to reboot to fix it. The last time it happened Aero was still working. I turned off Aero and turned it on again and it doesn't work. In dxdiag, DirectDraw, Direct3D, and Texture all are disabled. DDI Version also shows as Unknown. I restarted and all is fine. I have had Windows 7 for about a month now and this has only happened the past 1-2 weeks. My ATI drivers are from Asus and are 8.703.Is there any other information I should look for and post?
View 9 Replies View RelatedSPDIF used to work flawlessly with WMC7 and Intel G620 integrated graphics. I only needed to set the SPDIF as default in the Via HD panel.Since installing an HD 6450 video card I have to re-select this option everyday, or more if the HTPC stays in sleep mode for a long time. In fact the HTPC is always on & just goes to sleep when not used.The other day I found an SPDIF setting in Control Panel > Sound and made it the default, but that made no difference.
View 5 Replies View RelatedI'm running Windows 7 on a Compaq Presario CQ56.I've been having trouble with the multiple display settings changing on their own on my laptop. I've never had an external monitor hooked into my laptop, but for the past week or so my laptop will give me a notification that an external monitor has been plugged in, then it will disable though nothing has been change. I havan't downloaded anything recently besides windows updates.
View 1 Replies View RelatedI use a screen magnifier/reader,it doesn't allw aero to function because it uses the graphics card,a known mirrored driver issue,not fixable at this time.So I would like to either disable aero altogether so I can use a black theme,or use the built in windows7 basic theme but with black instead of the default colour.
I know I can shut off aero peak and aero shake but how do I shut all of aero off,other than using the Windows 7 basic theme,and that is why I asked about changing the colour in the basic theme.I hope that makes sense.
I have been running happily with an All in One Medion desk top, which I have modified slightly. It is really a notebook chip based system, only two sata outputs, but it does have a touchscreen and digital tuner. It is a 2.3Ghz Pentium dual core. 4 GB mem and 1.5 TB over two drives.
I pulled the DVD drive out of sata 2 port and fitted it in an external housing on a USB port. Then I wired the sata 2 port out via an eSata socket to a sata HDD docking station.
I have been running six months with two versions of Win 7 Home premium 64bit in dual boot mode with no probs. Last week I decided to replace the 64 bit with a 32 bit version so as to run some older programs.
So I formatted the external 1TB drive and loaded win 7 32x from the original disks. Took while with all the updates and SP1.
While doing this, I had no problem with the DVD drive but, as soon as I was up and running, the DVD drive stopped reading disks. Swap boot back into Windows 7 64 bit and it is fine, boot from Windows 7 32 bit and it is a dodo. It recognises the drive ID but will not open a file or boot from a bootable disk. I have checked for out of date or missing drivers but nothing shows.
I suspect I have a protocol problem, Not sure. It appears to be using a new Windows 7 sp1 driver. Or maybe something wrong in Global settings.
I have a desktop PC running W7x64 for which I rely on my Alfa AWUS036H wireless USB adapter for an internet connection.
Windows 7 has a feature that seems to detect whether I turn off my monitor or not (for one reason, I know this because it makes a noise when I turn it on or off). When I turn my monitor off, my internet is disabled for some reason. I would like it to stay enabled so that I can download files and keep other active connections while the monitor is switched off.
I can verify that the indicator light on the USB adapter turns off when the monitor turns off and that the wireless utility that controls the device senses no device is present (i can see this using my secondary monitor, behavior only occurs when primary monitor is turned off).
Does anyone know how to disable this from happening? I have tried both turning off "Selective USB Suspend" and unchecking the "Allow computer to turn this device off" in the properties of the wireless adapter in device manager.
I have dell xps 15 laptop. Updating windows disables my wireless adapter. I have to perform system restore to get it working again.
View 2 Replies View RelatedI'm having a bit of a conundrum. My Toshiba touchpad has developed a bad habit of disabling itself at random.The device is listed as a Synaptics Touchpad V7.2.I'll be typing along, or moving the mouse, or just doing nothing at all (waiting for a download to finish, for instance) and the mouse will become suddenly disabled. The only way to get it back is by pressing FN+F9 or sometimes to press the enable/disable button immediately above the mouse. I know I'm not pressing either of these by accident when the mouse turns off.When this happened, I took it as a sign that it was time to reformat the hard drive and start fresh. Even during the Windows installation, the mouse continually disabled itself. After installing the Toshiba Value Added Package and the Synaptics driver, the only change is that now I can see a big icon in the center of the screen alert me when the state of the mouse switches from enabled to disabled.
I'm noticing now too that it's not just disabling itself. If I don't re-enable the mouse right away, it will renable itself after a few moments. This can happen as much as once every few seconds and makes getting any real work done impossible.
I just got a new laptop (Lenovo G770) and am busy configuring Windows on it. I am running into an annoying issue with my input devices. Whenever I type or do anything with my keyboard, it disables my touchpad for about half a second. Since I am an avid user of keyboard shortcuts, this is highly annoying and is messing with my productivity. I can't figure out how to turn it off--when I search for answers I just see lots of threads from people having the opposite problem, who want to disable their touch pad while typing. I currently have the Synaptic driver installed controlling my touch pad, and I can't see any options in its settings to disable this "feature".
View 6 Replies View RelatedStarting last night my Dlink DWA-130 is causing all of my rear usb ports to not work. If I plug it into the front the computer doesn't even recognize it. I have tried using different ports on the back with the same result. I have even reinstalled Windows and the problem is still there.
Not Sure if this helps but...
My Computer:
mobo: AsRock 970 Extreme 3
processor: Fx 4100
gpu: Radeon hd 6570
PSU: Inland Silver Series ILS-600-2 600 Watt
OS:Windows 7 Ultimate x64
I have a my HTPC plugged into a 5-port switch along with my Xbox 360, PS3, and U-Verse TV box. Naturally, all 5 ports are being used with line 1 going into my router. There are 3 other computers in my house plugged directly into my router.My problem is that my network ceases to work whenever I plug in the switch. I am neither able to access the internet or view any other computer on my network for file/printer sharing. Running ipconfig shows that I have no LAN/internet connection. If I unplug the switch and plug in the components individually, then everything works normally.I have tried 3 different switches but I am getting the same result. It is very inconvenient to have to manually unplug and plug in my various game consoles and TV box in order to enable them to access the internet.
View 9 Replies View RelatedI have recently been granted admin rights on my work computer.While the computer was locked down, the Aero visual effects were set to "adjust for best performance".I can change it to "adjust for best appearance" and the Aero effects appear - until I reboot the computer. After the reboot, the checkbox is still set to "adjust for best appearance" however, the effects are disabled. I have to change the setting, change it back to best appearance and hit OK. Then everything works again.The friend in IT who granted the admin rights told me that this is due to the group policy our company has set up - and that there is nothing he can do about it.I have checked gpedit and regedit but could not find any relevant entries.Do you have any idea how I could automagically adjust the settings back to best appearance after every reboot? I was thinking that if I cannot turn of the group policy myself, then maybe I could write some sort of script that changes to appearance settings for me (instead of me having to do it manually every time).
View 1 Replies View RelatedRecently in the past few days windows aero decides to turn off. I can re-enable it with the personalization but it seems like a hassle to do all the time. The computer also says that it "exceeded it's allowable memory" or something along those lines.Why is it doing this and how can I fix it? Also, on a related note, how can I make it so my programs can use more of my available RAM?
View 3 Replies View RelatedI don't have Mic Boosting slider on my Audio after adding Audio Fx to the audio driver.
View 1 Replies View Related
