error 606 cant access netwok location this is driving me nuts most programs when I try and load them in this comes up ...
I download the fix that w suggested but no change does anyone know how to fix this via regedit I cant even update word
I am having an intermittent problem isnalling different programs in Windows 7. I will get the following error message when the insall fails "Error 1606. Could not access network location %AppDATA%." When I got this error before I was able to get around it by crated another administrator account in Windows to install programs. Since then I have did a clean install of windows and the issue went away until several months ago. So far the programs that I cant install are Java updates, and Quickbooks Starter Edition. Below you will find some basics about my PC.
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
[Code].....
Upon installing Need for Speed: Shift, I get this error:
"Error 1606: Could not access Network location 0"
Can anyone tell me where "0" is located at in the registry?
All of my searches led me to the "Recent" folder, so I tried the method for that along with others and no go. I just can't find the 0 folder (or whatever it is?
I'm trying to open and download apple, itunes. I've downloaded the program and its giving me a cannot access network location %PUBLIC%Desktop. ive also found a microsoft
View 5 Replies View RelatedHow to Set the Windows 7 Network Location Type ?
View 0 Replies View RelatedWhen I insert a USB flashdrive, I receive error message "Location is not available. G: is not available.Access Denied".I can see the drive(s) in explorer, and I'm the Administrative User with full permissions, but it keeps telling me I can't access/use the USB prorts.
View 6 Replies View RelatedFor some unknown reason i have come to my computer and whenever i click on the C: My computer or any icon on my desktop or try and edit any file (delete etc) i get the pop up message C: is not accessible access is denied Location is not available.I thought this might have something to do with user accounts however I am the only user and administrator of the laptop and have all wrights, box's ticked.
View 3 Replies View RelatedDownloaded a video converter specifically Doremisoft Video COnverter Trial 4.4.3..when I was about to run the program a box pops up: Unable to load DLL 'ttsPlayerDll.dll': Invalid access to memory location. (Exception from HRESULT: 0x800703E6) with the ff details below: [code] When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 2 Replies View RelatedI currently have my Xbox 360 connected up to my Laptop via Ethernet and I am having a problem with streaming videos and music. Everything else works fine, it connects to Xbox Live etc, and connects to the Laptop and finds the video files, it just won't play them. It gives the error:
'The connection to your computer was lost. Make sure your computer is turned on, connected to the network, and running media sharing software.
Status Code: 53-C00DF238'
I can't find much information about this error apart from one person stating that the ethernet connection to their Xbox had made itself public rather than private and could fix it by changing it to private again.
This is where I'm having a problem. The connection is showing up as an unidentified network with no internet access and as a public network. I can't figure out how to change it to a private network, there just doesn't seem to be an option.
Everything else on the laptop is working fine, my firewall is configured correctly, media player 12 is sharing correctly, the homegroup is set up etc. It just won't stream the video and the only thing I can think of now is that it needs to be a private network in order to allow streaming. I just can't change it.
I have attached a screenshot of my network & sharing centre to show you how it won't let me change the network location type.
How do I set my network location, which is currently "public" to "Home"?
View 8 Replies View RelatedI have a desktop PC with a Broadcomm Gigabit ethernet onboard. I live in a rural area and do not have cable internet and I have to use wireless. I have a UM175 wireless USB device. I use the USB to connect to the internet and use "Internet Connection Sharing" to share with my local connection (Broadcomm).
I set the Broadcomm to 192.168.0.1 and all the other PC's on my home network can get to the Internet through it.
My problem is I cannot get the Broadcomm network location to get set to Home. It keeps defaulting to Public, and because it is Public, I cannot use Homegroups with it because it is being seen as a Public network.
I tried removing the wireless card and, using Device manager, I disabled the Broadcomm and re-enabled it but when it came back online it automatically reverted to "Public".
I'm trying to establish a home network between my 2 computers both running win 7 7100 (main is x64, secondary is x86). they are connected directly with an Ethernet cable. my main computer shares its Internet connection with the secondary computer (thus mains ip address for that connection is static, secondary is dynamic, assigned by dhcp).
my main computer does not recognize the network connection between the 2 computers - it shows up as an unidentified network and i cannot change its name or location (it's stuck at public).
is there any way to get my main computer to recognize the network without adding any hardware?
I have a brand new acer aspire notebook and I'm trying to connect to my airport extreme card built into my iMac desktop. The laptop sees the signal just fine, but it will not connect to the Internet and I get "limited access". What can I do to connect?
View 1 Replies View RelatedIm not sure if anyone else has had this problem or noticed it, but I have enabled the GPO prevent users from adding files to the root of thier users files folder on our network as we use folder re-directs to my documents which in theory should keep everything tidy. This works up until a point, if I try and browse to the location and create a file I cant. If I try and drag a file into that location I cant, but as soon as I try to save as it lets me
View 2 Replies View RelatedOkay so I just tried to add a new network location in the My Computer.
I set the network address as \MYLAPTOP but the program didn't let me do that because I need to specify a folder. I don't want to specify a folder because I just want to use the root folder. So I then typed it as \MYLAPTOP\ with an extra slash at the end. The shortcut was made but it didn't work so I tried to remove it.
Now every time I press "delete" on the shortcut Explorer.exe crashes and restarts. I tried this in safe mode with and without internet access but it always crashed.
Now I'm just looking for a way to manually delete the icon through registry or some other editor.
I used this weblog post (GHOST PXE Boot Via TFTP - Tygarbyte) to boot computer from network and run ghost on a network location. now when I try to boot several computers from the network and run ghost at the same time it gives me this error: error 52: A duplicate workgroup or computer name exists on the network.
I want to boot several computers and run ghost from a network location
How to Enable or Disable Changing Network Locations in Windows 7 ?
View 0 Replies View RelatedI am looking at a solution to tap into the portability of virtualization across hardware. i.e. if I have my development environment as a VM, I can access it and bring it up from any machine on the network. This will enable me to be not attached to any physical machine and allow me to access my development machine seamlessly from anywhere if it is stored in a network location. I have mainly two questions around such a setup.
1) Is there anyway of hosting the VM without incurring the expense of both the host operating system and the guest operating system? The only functionality of the host operating system to host the VM.
2) Is it viable from a performance stand point to have a VM booted up on a machine from a vhd placed at a network location?
I just reformatted my C: partition running windows 7.All my data is on the D: partition.I took ownership of all the files in D: Their is one folder I still don't have permission to open the files inside which are graphics for a website I am creating..The error message I get is "Windows photo viewer can't open this picture because you don't have the correct permissions to access this file location".so I ran the command prompt as administrator located the folder in question are ran "takeown /R /D Y /F *"It has given me full control of the files and made me the owner but still the error message comes up.
View 7 Replies View Relatedso today i ran into a nice little problem in windows 7. when ever i try connecting to a network it says limited access. so after a bit of googleing i believe i have narrowed the problem down to the fact that my network location awareness service is stopped when i try to start it i get the error.Windows could not start the network location awareness service error 193: 0xc1.
View 2 Replies View RelatedI have an iPhone 4 which has internet tethering. I can either connect this via the USB cable or wirelessly via my intel 6300N wifi card.
When I connect to my laptop via USB cable, the 'Set Network Location' box comes up, which I select Home Network. It is simply named 'Network', but I then go in and change 'Network' to 'iPhone'. This then shows up in the Network and Sharing Centre as iPhone on a Home Network. This works perfectly, is super fast and when I'm finished, I disconnect the USB and shut down.
When I next turn on my laptop and connect my iPhone internet tether via USB cable, I am once again asked to ''Select a location for the 'Network' network''. Windows 7 netwkr and Sharing centre isn't recognising the same iPhone is connected and asks me to set up a home network again.
I've gone into 'Merge or delete network locations' and the original 'iPhone home network' is set up (not in use) as well as the new 'Network' location that it's asking me to set up. If I merge the second 'Network' and original 'iPhone network', this removes the second network and I'm left with the 'iPhone Home network (in use).
If I disconnect the iPhone and reconnect, it asks me each time to select a network location for the 'network' network. If I don't merge them, I end up with Network 2, Network 3, Network 4 etc all the while still having the original iPhone network not in use as well as any other not merged or deleted.
Why won't it recognise the same iPhone as being connected and selecting the iphone home network that I set up and why does it keep asking me to create a new one whenever I connect?
This never happened before, with my laptop previously recognising the iPhone home network I originally created ages ago. There has been no significant updates or changes that I'm aware of, except that I updated my iPhone software, bt this has been done in the past numerous times with previous iPhone updates and hasn't happened before.
I have a Virgin wireless broadband usb modem, which the system recognises each time I connect it. It's only the iPhone connection that's not saving. The iPhone network is 'unmanaged' but so is the Virgin Broadband USB.
I have a Pioneer Dreambook P170HMx running Windows 7pro x64. If there's any other details you need, I'm happy to supply them. All I want is my system to save the network configuration and recognise when I connect the iPhone tethering that it's an already created iPhone Home Network.
I just made a custom Windows 7 computer image for my company with all the bells and whistles that I've learned from this site and the Microsoft security forums.However, I went to join it to the domain and I get the following message:"the following error occured when attempting to join the domain.....; the network location cannot be reached"-I am trying to add it to a server 2k3 domain-I can ping IP and FQDN of DC-can add other windows 7 machines to domain-can add XP machines with similar security settingsI firmly believe that it is a registry edit I have made or a gpedit that I made, I'm just really not sure which one and it seems like I tried changing all the major ones back
View 6 Replies View RelatedI can connect to my WebDAV folder on my online server by BitKinex for example, but when I want to add a Network Location to the explorer it fails with the error message that the path is not valid ... but it is valid though.
View 4 Replies View RelatedI'm using Win 7, full RC, 32 bit. This problem happens on any machine and happened in Vista 32 bit as well.
I host our SharePoint server externally at Apptix and I am unable to map a network location to show up in Explorer. I'm not technical enough to know if this is a WebDAV issue or what. I have done tons of web searches when we had this problem initially with Vista 2 years ago. The solution was to download KB907306 and it worked in Vista.
Ok, I can accept that Vista and SharePoint development may have been out of synch at some point, but why the (insert multiple explicatives) hasn't Microsoft fixed this in Win 7? I'm not the only person in the world who hosts SharePoint and wants to view folders in Explorer. Is my hosting company the only one configured like this?
That being said (whew, I feel better), I tried to install KB907306 in Win 7 and I can now attach the location. I can see it on the left side of Explorer (folder view?) and in the main section. I can expand the left side to see the sub folders (I am prompted for my credentials), BUT, the contents of the folders never update the main window. I never see the files I want to see.
Oh, I also had the nightmare Outlook 2007 / hosted Exchange server config issue. I got around that one. Both our Exchange and SP servers are hosted by Apptix.
Sometimes when I connect to a wireless network it takes windows a long time (+2 min) to id the network and set it as public. Is there anything I can do to speed this up?
View 3 Replies View RelatedWe are a small office, 5 or 6 computers. Only 3 are every day computers, other 3 are "server", admin and extra computer. The three in use every day are new win7pro x64 machines. Our server is xp pro (32bit) with a shared drive as our "server" drive. We access this for all our job related materials, etc. There is no network setup, just shared folders among our workgroup. we just got the new win7pro machines setup and are using Windows Backup function to create system images to the "server" computer in a shared folder. We've got the images created on 2 computers, and can see the .vhd files and associated folder structure. When testing to see if we could restore from these images, we got the error "Cannot locate backup sets on machine, etc."I moved the backup folder to the root of the drive, and made sure it was WindowsImageBackup or whatever the default is, but still could not find it.
View 8 Replies View RelatedWe used to map a network location an http site in Windows XP. Worked well, but under Windows 7 when we map the same location we show an empty folder and it should contain all the links from the site. I did notice that when we tried this on a different XP box we were prompted for the user ID and Password to login to the share (makes sense to me... ) but there was no prompt in Windows 7 - instead we just get "This Folder Is Empty" Did I miss something? We can access the website in IE... did not try to access the share using the computer name instead of the website... could try that.... however they use the mapping as above because they still use FrontPage to administer the site and this method provides the mappings etc that FrontPage likes to have.
View 1 Replies View RelatedLast night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies View RelatedI have tried numerous of time to install the latest version of Java. Everytime I try to install it I get Error 1606. It tells me that it is unable to get in contact with the network. I even trie using an offline installer & I still receive the same error message.
View 1 Replies View RelatedI've had this error installing java for about a month or more now and I keep getting this error trying to update and I uninstalled the old version and now it's gone so any info of how to fix this I'm really upset because now I can play games like I used to.
View 4 Replies View RelatedHow to fix the ERROR 1606 in windows 7, I cant download adobe reader?
View 1 Replies View Related