Can't See Files On Removed SATA Drive Attached To Desktop

Jan 19, 2013

My laptop recently crapped out, so I removed the HDD and connected it to my desktop. It says that all my files are there based on size, but I can't see/ access all of them. It is a SATA drive, directly connected, everything seems to be working fine, except I cannot find the files it says are there.

View 5 Replies


ADVERTISEMENT

Prevent Removing Attached VHD, From Safely Removed Attached Media?

Feb 16, 2012

prevent users from removing a attached VHD from "Safely remove hardware and eject media", We have had multiple users eject the VHD when they are going to unplug their USB and they are ejecting the attached VHD instead.

View 1 Replies View Related

New Router - Can't See Desktop Or Printer Attached

Mar 1, 2011

Swapped out a Belkin N Series router with a newer model (3 of the 4 ports were not working). After doing the install of new router, per there directions, My 2 Dell Laptops Can't connect to the Dell Tower (that has my printer attached to it).

Had no problem seeing the desktop when I clicked on "network" on either my work laptop (running win 7 pro x32 or the wifes running vista sp2 x32 home Premium). But Now neither can see the tower.

Nothing else was changed, all setting were set the same. Thought Dells could talk to each other via RF signals, no need for routers.

View 2 Replies View Related

Install Sata Hard Drive As A Slave Where The Master Is Also A Sata?

Aug 10, 2011

i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7

View 4 Replies View Related

Transfer Files From Bad Sata Hard Drive To New Hard Drive?

Dec 24, 2011

I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?

View 4 Replies View Related

SATA-II Drive On SATA Raid Controller?

May 7, 2011

i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?

View 5 Replies View Related

Windows 7 Removed Desktop Sharing Program?

Nov 19, 2009

Am i blind or did they also remove that or do they have a replacement for it? Also what was the name of it again on Vista ?? Desktop share connection or something like that ??

What are some good programs you guy's might have tried or use to you would recommended ? [besides gotometting, HP's skyroom, sharedview, or any online versions]

View 9 Replies View Related

Windows 7 Desktop Changes When Removed From Docking Station?

Sep 7, 2012

When I remove my laptop from the docking station, the wallpaper shrinks and the shortcut icons are rearranged. annoying and time consuming.

View 5 Replies View Related

Computer Crashes When In Sleep Mode, Dump Files Attached?

Jan 10, 2012

Past 4 nights my computer has been off when I wake up. I put it in sleep mode before I go to bed. I request someone takes a look at my dump files.

View 9 Replies View Related

Ended Few Tasks Now All Icons And Taskbars Removed From Desktop

May 21, 2012

While using the task master, I accidentally went to processes and ended a few tasks which resulted in removing all the icons and task bars from my desktop which has gone blank. How do I revive my desk top ?

View 3 Replies View Related

Thumbnails On USB Drive Attached To NAS Not Previewing

Jul 15, 2012

From a fresh start up of the computer, I can get my thumbnails to generate any where on my computer, the NAS, or the USB attached to the NAS. However, after a short period (not specific, can be 5 mins or 30 mins), the USB drive attached to the NAS will no longer generate thumbnails, however, everywhere else still does (ie local files or even NAS files).

I have multiple machines, and it happens on this machine only (brand new only 2 weeks old, fresh windows 7 installed only 2 weeks ago).

I am using Windows 7 64bit Ultimate, but so are the other 2 windows 7 machines, and they do not forget to show thumbnail previews after a little while.

- "Always show icons, never thumbnails" from folder options is UNTICKED. - tried all options from here Thumbnail Previews - Enable or Disable - Windows 7 Forums (with everything set to enable thumbnails)

What seems to happen is that it suddenly forgets that thumbnails are enabled, but only for that specific drive. Using the link above, it should always be the first example "EXAMPLE: Thumbnails Enabled in Windows Explorer" but when it decides to stop working it becomes "EXAMPLE: Thumbnails Disabled in Windows Explorer", however, it only effects that one specific USB device attached to my NAS.

It has to be a Windows 7 issue on this machine only, as all my other Windows 7 and XP machines always show thumbnails. As far as I know, all the Windows 7 machines have exactly the same software loaded (I re-formatted them all about 2 weeks ago when the new machine was built).

If I restart the computer all thumbnails are working again until it no longer likes me.

View 1 Replies View Related

Can't Boot If USB External Drive Attached

Dec 12, 2009

We just bought a WD 2TB My Book Elite external hard drive. When we boot the computer into Windows 7 and plug in the USB cable, the drive is recognized and assigned a drive letter. Everything looks normal--we can access the drive, read files on it, copy files to it, etc. However, next time we power up the computer, if this drive is attached, the computer won't boot. The Dell BIOS splash screen comes up and sits there for a while, then the screen goes black--and absolutely nothing else happens. If we then disconnect the drive and start the computer again, it boots normally. The external drive has the latest firmware and software installed, and we have the most current BIOS installed.

View 9 Replies View Related

What Duplicate Files Are Safe To Be Removed

May 19, 2012

To put it shortly, I have that utility called advanced system optimizer and I performed a scan to find duplictaes on my partitions. It resulted a cluster of 10000 files. Ther are all kind of files and many are founded on several locations. I dont know if its safe to remove them and which exaclty should I remove( one from each group all etc). What put me on doubt even more is thati saw files bot located in c program data and in c users so I want to ask if its normal to have them simultaneusly in thse locations?

View 3 Replies View Related

Microsoft Backup To An Attached NAS Drive On Network?

Nov 21, 2011

I wanted to back up my data files using the supplied backup utility in Win 7 64bit. I run the program and under Backup Destination all I see is my DVD Drive and no way to change to another destination. So under Devices with Removable Storage(1) I see the drive. In my Network locations I created a Share called Backup which I created

View 6 Replies View Related

Analyzed All Files And Made Sure Corrupt Ones Are Removed?

Mar 1, 2012

analyzedall files and made sure corrupt ones are removed?

View 3 Replies View Related

Can't Change Quota Settings On Attached Network Drive

Feb 12, 2012

I am using a Windows 7, 64bit machine with an attached network drive I use for streaming my media. The manufacturer is Seagate (2TB) STAM2000. So, I have two folders in this drive:

TV Shows

Movies

combined there is just 500gb. So, the Seagate NAS tells me the drive is full. I right click on the drive and chose properties. I then chose Quota Settings. Here it says: To change these settings click Quota settings. I do this anf nothing happens. It looks as if this option is to prevent one user from filling the drive. I also connected a WD NAS and the same option appears.

View 1 Replies View Related

Startup Extremely Slow When External Hard Drive Attached?

Nov 21, 2010

i just bought an external HD drive and it's very good but ... When I attach my external hard drive start up becomes painfully slow , like at least 5 times slower !. I get past the BIOS load screen fine but once the computer gets to the Starting Windows screen it sits there for a good 30-60 seconds. Then when the screen goes black (as it's going from the "starting windows" screen with the little windows 7 icon to the login screen) it again sits for anywhere from 1-2minutes, if not longer.i have an old external HD and I've been using it for 2 years and never had this problem !another thing when i click on " safely remove the HD " before i reboot and without taking the usb off the computer just stats normally !

View 9 Replies View Related

Can't Find Old Desktop Files On Hard Drive?

Nov 21, 2012

Got a new computer today, plugged in my old 500GB hard drive for back up storage. I went into it, can see everything fine, go through the program files, etc...Except I can't find my old documents, pictures, or anything that was saved on my desktop. A search won't even bring it up. How the heck can I get it back?

View 2 Replies View Related

Weird Problem When Cd's Removed From Drive

Mar 3, 2009

After I have used a cd to install a program and then remove it I get an error that there is no disc in drive d: Anyone else get this error?

View 4 Replies View Related

External Hard Drive Can't Be Removed

Dec 7, 2011

I have previously started a thread asking a question about why external drives cannot be safely removed due to being either in use by another process or wording similar to this.I have now searched this forum for any previous threads relating to this problem, and also at other forums without any definitive answer as to a solution. I was previously told about a program called LockHunter which I have used to identify the system processes which stop the drive from being able to be removed.I have searched around for a few hours trying to find a solution to this problem to no avail.Does anyone know of a definitive solution that they could outline step by step here or is this another bug in Windows that they have deemed to hard to patch and therefore placed the topic in the too hard basket? Just thought I would add that I just checked the security of my external drive. This is unrelated to the previous question, but does anyone know why there would be an SID (EG: S-1-5-21 ETC ETC) named as the owner of my external drive? I have just put about 600GB worth of backup on this and prior to that it was unused.I understand that SID's can be remnants from having the drive plugged in to other machines, however the same SID which appears if I look at the owner of the root drive letter does not also appear in the first screen in the security tab under group or user names.

View 9 Replies View Related

Windows 7 Won't Boot When 2nd OS Drive Removed

Jul 23, 2012

I have a windows 7 64 bit system with 2 drives that have OS on them. Every morning it asks me which one to boot to. I choose the first one (the most recent SDD I put in). I did this because I needed more room for the software we use so it is larger than the first. The problem is, when I remove the smaller SDD (that I don't boot to), it will not boot. I've gone into the bios and made sure it is booting to the SDD, it just says loading operating system ........., then, after a minute is says Boot to DVD or USB.

Gigabyte Z68X-UD3H-B3
OCZ Vertex 3 120GB
OCZ Vertex 2 60GB (the one I am trying to remove)
Intel Sandy Bridge 2600k
16Gb Patriot Ram

View 5 Replies View Related

Removed Cd Drive Computer No Longer Boots?

Dec 12, 2012

I had a stock machine running windows 7. I built a computer for myself and I hardly use cds so when I needed to install windows 7 on the new computer I simply removed my cd drive from my old computer and put it in the new one. I assumed that since the os is installed to the hd that the computer would still run but it does not . I already installed windows 7 on the new computer but when I went to boot my old pc up it says no operating system. Do I just need to buy a new cd drive? Or do I need to buy another copy of windows?

View 5 Replies View Related

[BSOD] BSOD Recently Started All Required Files Attached?

Dec 5, 2011

I am writing this right now because after the last BSOD it said "Windows can not start" and I had to restore to when it was previously working. So up until that point this is what I did.Since working with computers almost my entire life I know most BSOD are due to either bad memory, drivers, or bios. I started there and updated my nvidea drivers but it happened again. I moved to the motherboard bios.I did find a newer one on there and using ASUS tool I flashed the BIOS. Same thing still happened. Next I ran memtestx86 for 8 hours and it returned no errors.At this point I just decided to look for newest drivers for everything. One thing that happened consistently was that my wireless USB adapter from Cisco had to be unplugged and plugged back in for it to work. I went there first, reinstalled the drivers but still the same thing. I thought maybe it was my hard drive. I downloaded Seagates Utility tool and ran all the tests and they all passed fine. I ran defrag just for good measure along with windows version of the mem test and that passed as well. I still continued to get the BSOD and I have to tell you I'm irritated and also stumped.

Next I moved onto software. I have been using AVG free for years but I know virus programs do some crazy stuff and I got rid of that. Turned on windows defender. I decided that since the wireless adapter didn't work after these crashes maybe lets just go to a direct wired connection. I disconnected the cisco wireless adapter and I'm just using a direct connect right to my router.These come at random times.. nothing I do can trigger it. It can stay on for days and not crash and then there are times it can be up for 10 min and crash.Some of you might notice that in the CPU-Z screenshots I had to take the screenshot with the error underneath. Every time I chose either of the two slots it crashed the program.I have not done anything internally besides add some neon to my computer which does not connect to the board at all.I have seen IRQL blue screen once so I even went as far to go into the power settings for windows and make sure the usb and everything never went into any kind of "standby" mode.

I believe this is still under warranty and I would like to go in with good information if I need to challenge and get new hardware if that's what it is.On a side note I have not touched the memory physically. I know some suggestions were to reseed the memory and chip but In my opinion something that has been working for months that never moves off my desk and is never basically touched besides the power button shouldn't mean something just came loose after 4 months of owning it.Again that's just my opinion. I have removed AVG, Ad-Aware, Some webcam motion detector software (which was a joke) and the only thing that was really installed was Skyrim.

1 x Case CoolerMaster HAF 932 Full Tower Gaming Case - Black 1 x Case Lighting Liquid Neon Thunder Pattern Light - Red 0 x iBUYPOWER Labs - Noise Reduction None 0 x iBUYPOWER Labs - Internal Expansion None 1 x Processor Intel� Core� i7-2600K Processor (4x 3.40GHz/8MB L3 Cache) 0 x iBUYPOWER PowerDrive None 1 x Processor Cooling Asetek 550LC Liquid CPU Cooling System (Intel) - ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow) 1 x Memory 8 GB [4 GB X2] DDR3-1600 Memory Module - Corsair or Major Brand 1 x Video Card NVIDIA GeForce GTX 580 - 1.5GB - Single Card 1 x Video Card Brand === High Performance === EVGA Brand Video Card Powered by NVIDIA 1 x Free Stuff [Free Game Voucher] - Dungeon Siege 3 - Free with Purchase of NVIDIA GeForce GTX 550 or above 1 x Free Stuff [Free Game Download] - Just Cause 2 - Free with Purchase of NVIDIA Video Card 1 x Motherboard [SLI] ASUS P8Z68-V -- 3x PCI-E 2.0 x16, On-Board Bluetooth, Lucid Virtu Technology 0 x Intel Smart Response Technology None 1 x Power Supply 1000 Watt -- CoolerMaster RSA00-AMBAJ3-US 1 x Primary Hard Drive 1 TB HARD DRIVE -- 32M Cache, 7200 RPM, 6.0Gb/s - Single Drive 0 x Data Hard Drive None 1 x Optical Drive [12X Blu-Ray] LG BLU-RAY Reader, DVD�R/�RW Burner Combo Drive - Black 0 x 2nd Optical Drive None 0 x Flash Media Reader / Writer None 1 x Meter Display NZXT Sentry LX Aluminum Fan Control, Clock, and Temperature Display 0 x USB Expansion None 1 x Sound Card 3D Premium Surround Sound Onboard 1 x Network Card Onboard LAN Network (Gb or 10/100) 1 x Operating System Microsoft Windows 7 Home Premium + Office Starter 2010 (Includes basic versions of Word and Excel) - 64-Bit 1 x Keyboard Thermaltake eSPORTS CHALLENGER PRO Gaming Keyboard 1 x Mouse Thermaltake eSPORTS BLACK Professional Gaming Mouse 1 x Monitor 27" LCD 1920x1080 -- Sceptre X270W-1080P 0 x 2nd Monitor None 0 x Speaker System None 1 x Headset Thermaltake SHOCK Spin Gaming Headset - w/ Ergonomic Shaped Velvet Ear Cushions, Neodymium Magnet Speakers, In-Line Volume Controller & Independent Microphone Box 1 x Video Camera Connectland 1.3MP USB Interface WebCam 1 x Advanced Build Options iBUYPOWER Specialized Advanced Packaging System - Protect your investment during transportation! 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Achieve exceptional airflow in your chassis 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Basic Pro Wiring 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Power Package (Individually Sleeved 24-pin ATX, 8-pin CPU, and SATA Drive Power Cabling) 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Video Package (Individually Sleeved 8-pin and 6-pin PCI-E VGA Power Cabling) 0 x Case Engraving Service None 1 x Warranty Standard Warranty Service - Standard 3-Year Limited Warranty + Lifetime Technical Support 1 x Rush Service Rush Service Fee (not shipping fee) - No Rush Service, Estimate Ship Out in 5~10 Business Days

View 9 Replies View Related

Sata Drive Recognition Preventing Addition Of 2nd Drive

Dec 8, 2012

Have XP on C drive and looking to install Win 7 on 2nd Sata drive for dual boot. However, when installing a 2nd Sata drive my XP bios identifies it correctly as a Sata drive but my PC Disk management recognises it as a Removeable disk preventing me from installing Win 7. I have tried a couple of different Sata disks with the same result.

View 6 Replies View Related

External Sata Drive Will Not Keep Assigned Drive Letter?

Jul 16, 2011

I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.

View 6 Replies View Related

Install Windows 7 With Sata Hard Drive And IDE DVD ROM Drive

Oct 8, 2010

I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.

My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)

View 9 Replies View Related

Windows 7 Sata Or IDE Drive

Jan 22, 2013

I need to reinstall my Windows 7 from cracked to legal. My PC has 3 HD in it. 200 GB SATA, 200 GB Primary IDE and 160 GB Secondary IDE. It is currently loaded on the 200gb Primary IDE and the other 2 are for backup and saving data. Would I be better off installing Windows 7 on the SATA drive and using both IDE drives for backup and saving data? If so is the easiest way to just disconnect the IDE drives until Windows 7 is installed then format the original OS drive to use for backup?

View 1 Replies View Related

Backup With SATa Drive?

Mar 16, 2011

Having just bought a new PC i was left with a perfectly good SATA HDD which I intended for use in backups. The drive seemed to work ok until it cane to backing up! The drive was 320gb but when trying to back up it shows as only 47gb (not much good for a full backup).

View 3 Replies View Related

Win 7 Not Recognizing SATA Drive

Jan 1, 2010

Before I made the commitment to use Windows 7 as my primary OS, I figured I'd experiment in a dual boot environment. My current setup is Windows XP (x32) installed on a 500GB SATA drive. This drive has a partition for the OS and a separate partition for all of my files and data. To install Windows 7 I removed my SATA drive and (successfully) installed Windows 7 (64-bit) onto an 80GB IDE drive (controller 0, disk 0).

After the installation I shut down my system, reconnected my SATA drive, changed the BIOS boot order to look at my IDE and Windows 7 booted without a hitch. My motherboard is a Gigabyte GA-K8U-939

Now, with Windows 7 running and my SATA drive connected, Windows 7 does *not* recognize the drive. It is completely missing from the disk manager. I loaded the drivers for my motherboard ((however since the MoBo is a couple years old, it doesn't have Vista or Windows 7 drivers)), it loaded quasi-successfully but spat out some error about it not being totally successful. Now, after I log into Windows 7 I receive an error that goes like,

Code: Initial ALiRAID error!!Please Check:

1) ALiRAID driver is installed
2) ALiRAID controller is connected to disk drive(s)

When I reboot my computer and switch the boot order in the BIOS to boot from my IDE drive, my system will boot into Windows XP without any problem at all. I've also switched the BIOS setting from "RAID" to "IDE" for the SATA drive and that appears to have done nothing towards Windows 7 being able to access it.

There's gotta be some way to get Windows 7 to see my SATA drive, doesn't there?

View 6 Replies View Related

Sata Drive Needs Formatting

Aug 10, 2009

I have installed windows 7 ultimate x64 and i am really impressed by it.

but i have a question for you, i have a second 500 gb sata hard drive which i have connected after the install which is formatted with ntfs file system from my original windows xp o/s , it shows up in device manager but will not work , windows ask me to format the drive which i dont want to do because has loads of files on which i dont want to lose.

am i missing something they both use the ntfs file system .

View 0 Replies View Related

Add A 3rd SATA Hard Drive?

Jan 19, 2012

I am wanting to add a 3rd drive to my dell GX620. It has only 2 ports for SATA. Any good ideas on how to do this? Maybe convert an EIDE port?

I have a sata dvd writer, and two sata hard drives. Hoping to use them all. DVD writer is a lightscribe that's why I wanted to keep it.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved