when I turn on my computer after 6-8 plus hours of not using it, I get this message while the BIOS is booting but before Windows starts: Overclocking Failed! Please enter setup to re-configured your system. Press F1 to Run Setup.Press F2 to load default values and continue.Now I know how to simply fix this issue by resetting the BIOS and/or if necessary, temporary removing and replacing the jumper pin on the motherboard and/or if *really* necessary, temporary removal and replacement of the CMOS battery. For me, it works by simply resetting the BIOS.To let you know since this has been happening, I have increased my RAM to 8GB. I had to make some changes to my BIOS like slight voltages increases in DRAM and the motherboard's northbridge and the memory module timings modified. I saved these BIOS changes (as a BIOS profile) to stabilize my 8GB of RAM which seems to work great -- stability issues solved.What actually happens is that one the *very first* BIOS booting when powering up my computer, the BIOS does not boot and without the beep from the motherboard's POST BIOS test. My monitor is black while, yet the tower LED shows it is running. I can hear the fan in the tower running fine. I have to manually restart the computer from the reset button and then on the second BIOS boot, the BIOS loads fine, followed by this "Overclocking Failed!" issue just before Windows can load. After another computer reboot and my resetting of the BIOS, followed by yet another computer reboot, the BIOS and Windows operating system loads fine and I am on my way.
Now *this is a pain in the butt* each morning after the system has been off for awhile or when my computer has not been running for 6-8 hours!!! The computer SHOULD NOT have to go through this!!! This whole sequence of events (4 computer boots) in the last paragraph does not happen if the time duration since my computer was not running is short since I last used my computer -- the computer boots and runs completely fine.Any ideas so I can keep the modified BIOS profile so my computer runs stable and not have this whole sequence of events happen -- so BIOS can load without any issues?Some basic general stats of my system:
- Windows 7 Pro 64-Bit.
- Intel Core 2 Quad Q9550 -- Yorkfield 2.83 GHz 1333 MHz processor.
- ASUS P5Q desktop motherboard.
- 8 GB of Corsair XMS2 4x2 GB DDR2 RAM.
- XFX Radeon HD5670 Graphics Card.
I had windows 7 and i installed red hat linux by creating a partition.When ever i boot the linux is the default OS which will come up unless i dont select the windows 7 manually.Now i wanted to remove the Linux so i removed the partition from windows.After reboot i see GRUB.Can you let me know how to go ahead and boot the windows now.
Repair company ****ed up my PC, they changed booting sequence and switch off BIOS booting screen. Now when I want to reinstall my system (because of serious virus) my PC doesn't accept booting win DVD and I can't see any port messages. Can't acces BIOS. I tried taping 'delete' , 'F2' , 'TAB' , 'F8' non of it works. Maybe it works because when I tried taping them I couldn't see anything on screen 'no signal to monitor' and system didn't start at all. It takes 15 minutes to start system now without touching anything.It's new computer connected to plasma screen via HDMI. Whole spec is ni my profile.
I'm on a brand new HP computer running Windows 7 and everytime I download a file from the internet or even save files from local programs to my desktop, they are saved as some sort of hidden file...or at least they behave similar to hidden files. The difference is if I open up an Explorer window and browse to my desktop, I can see them there that way, but there is no icon on my desktop for the file. I CAN see the the saved file on my desktop if I turn "view hidden files" on...but when I look at the properties of said files, they are not actually marked "hidden." I can even copy/paste that same file in my desktop and I will see the copied file show up visually on the desktop, but still not the original file unless I browse to the desktop in an Explorer window.When right clicking the desktop, "Show desktop icons" is turned on and I can view all of my other desktop file icons, shortcuts, etc.
The first one is the BIOS boot up screen that usually leads me to Windows. A few months ago, this vanished. I don't know if it was due to a version of Windows 7 i installed or something but whenever I turned on the PC, the screen would appear blank for a few minutes then go straight to the Windows welcome screen. I thought it was weird, but I didn't see a problem since it went to Windows so I disregarded it, which looking back is kind of dumb but I didn't want to risk doing something to the computer in the process.So a few weeks ago I was trying to partition the hard drive so I can install the Windows 8 preview on it, rebooted the computer and...nothing. It wouldn't take me to Windows to there's clearly a problem with the hard drive. I could always get a new one, but there's still the problem of the vanishing BIOS screen.
i went to update my BIOS after one of my games(call of duty: Black ops) was lagging badly and i did everything to reduce lag even though my computer could run it on high settings. BTW the lag was gone after i upgraded BIOS for the game i mentioned above.So a friend suggested that i update the BIOS. i did and then after restart my computer would freeze but when i unplug a usb device from 2 ports grouped together it booted. Today i got the boot until i remove a USB device but now i get crashes in games. it also decided to install printer drivers...again even though the printer has been working fine since the day i installed windows 7 x64 months ago. My version is not a beta or a RC its a full version fully updated with some minor tweaks like UAC turned off but nothing major that would cause startup to fail.i know i dont have a virus or a rootkit. Thats the first thing i checked. This didnt happen till after i updated the BIOS. so here is what i have done so far:Startup repair twice(i chose the recommended option).....neither time it worked it just reverted it back two days.did a antivirus,rootkit, spyware,etc... scan found only small stuff that wouldnt cause this much problems. in other words small stuff that i got rid of easily that is fairly common such as data miners and tracking cookies.also ran combofix....didnt find anything.next did a scan using Advanced windos Care 2 didnt find anything wrong with the disk or anything else.also ran chkdsk also didnt find anything.i ran out of options of stuff to do. i dont mind re-installed windows 7 but kind of want to use that as a last resort.
so I was on my desktop main account and then let my dad log on to a guest account I recently created for him since his laptop isn't working, then when I came back I logged onto my profile I couldn't open any browser, in the case of firefox this came up (firefox can't load host something, missing profile) and chrome (your preferences cannot be read)
then I couln't open some shorcuts (windows cannot find the target. and my utorrent setting reset as well, like if I had never used it, BUT the guest account works perfectly.
I'm able to open firefox with open as administrator but all addons, bookmarks are gone, I can't open the document, picture, and music links on the start menu either
Originally I had all my data files in drive D and only programs in drive C. Somehow my old user profile got corrupted and the Backgound wall paper is not working properly. So I created a new admin profile to fix it but now I have a mess.After I created a new admin profile and moved the old users folder/files to the new user , I decided to delete the old profile after everything seems to be working properly . When deleting the old profile I elected to save old user files to my desktop ( fortunately) . I now have a very fragmented system . Some of the folder/files are still under my old username in D drive, nothing in my new user name in D drive plus almost all of the folder/files from the old user ( in drive D) are now in a folder on the desktop where windows elected to place them when I elected to save the folders/files. I really need all the old user folders.I would like to have the Data in either under my old or new username in Drive D instead of fragmented all over the place. I realize I ended up in this situation because I didnt understand fully what windows will do when creating and deleting user profiles.
i have problems with adobe cs6 installing, and it's been suggested i install it under a new profile. no problem with that, however, will i be able to access / run it under my 'normal' profile? finally, will doing this affect any of my existing programs in my 'normal' profile?
When I rip a CD and then rename a track (adding a date for example), when playing back that track with Windows Media Player or my MP3 player the display reverts back to the original (unmodified) name.Can anyone tell me why please and what can I do to get the modified lable to become visible ?
When searching in windows 7 libraries (in pictures, music etc) the results shown are only arranged in date modified clicking on drop down menu show all other choices (top results etc) greyed out Im using windows 7 build 7601 acer aspire 5332 4gb ram
The icons on my desktop suddenly were modifed with a tiny little rectangle that looks like a miniature desktop with little red, green and blue characters added to them.The recycle bin and my computer icons don't have this modification.
"date modified" field does not update when files are replaced in a zip folder while running Windows 7 64-bit.
Data files are stored in zip files and utilized daily. At the days end the files are replaced with the most current revision. The updated file displays the correct "date modified", however when the filed is transfered into the zip file, the "date modified" displayed within the zip file does not update.
I don't have this problem with Windows XP or 2000. Is there some hidden setting that is needed for Windows 7 to recognize file modification dates just as every version prior?
It becomes frustrating that Microsoft continues to add nice new fancy operating features, but yet continuously fails to ensure the basic functions are maintained.
Can Windows 7 Professional be modified to run as a domain controller and use Active Directory? If so please point the way to a tutorial if you know of one.
So whats the difference between installing a stock driver over a modified manufacture one cause my video driver is alittle outdated and i check on the website that a new one was release so should i uninstall that one and install the new one or just leave it as it be?
For some reason I have lost my Name, Date Modified, Type options at the top of my folders.I have gone thru every setting and can't seem to get them back.
I would [almost] swear that I used to be able to click on a file in Windows Explorer and then add or change it's details such as the dates. I may be "misremembering" but I think I could do it at the bottom of the Explorer screen or by rick-clicking, selecting properties and the Details tab.If it was ever true it is no longer so. I can't get any of the fields for a file, from Explorer or file properties/details, to open up for entry or modification.After looking at similar posts here, I went through the Take Ownership process just to make sure there were no security issues but that didn't make any difference.
In Windows 7, whenever I click on a shared folder, it immediately does something (thumbnail creation?) and changes the modified date. So if I select mulyiple folders, they all have their modified date changed to the same time. Is there a known way to stop this from happening? It's a little annoying right now.
I've got four sticky notes that I'm currently modifying. One of them, I deleted a large amount of text from it. When I turned my computer on today, the old version was there as well. I tried to delete it, but my computer is treating it like it's a part of the desktop background and not a note. Two of the other notes are doing the same thing. When I reopen the Sticky Notes gadget my newer versions open too, but on top of the others. I can't move the others, delete them, anything.
My laptop is less than a week old, with a 6GB RAM, 750GB hard drive, and 2.5GHz + Turbo processor, so I'm pretty sure it's not the problem. I just installed a new video editing software (Corel VideoStudio Pro X4)
How do I get back the original time of date modified? I need them the date modified to be restored immediately.if this cant be done in a snap or soon as all my office files(doc,xls) are in a folder and all are showing the same date!
What type of ways are there to change a modified file date without a human being involved with the computer?I'm trying to prove that I didn't change a file on the computer. Could Windows 7, an application on the computer, and application in the cloud with access to the computer (ie Dropbox or QuickBooks, etc) or Norton Security Software change a Modifed date without me touching the computer?
It seems that Windows likes to modify my jpg files!! Modified date and filesize seems to change on its own, perhaps something to do with the thumbnail view in Explorer.
Cleaning up the friend of a friend's completely virus infested, badly working computer.
Windows 7x64 HP Pavilion g6 Notebook PC
The Basics:While I was beginning to install and manually offline-update various anti-malware tools so that I could begin to determine what I needed to do to get this thing clean and properly operable, I noticed while looking at Programs and Features that many of the install dates for various software were dated in various months in 2013. My installations were 1 year, 2 days ahead of the current date. Windows Explorer shows this to be consistent throughout the files and folders installed.
Looking at the install dates for some of the HP proprietary software/bloatware, I can tell this behavior started some point after the computer was purchased and used (the bloatware installation date was one day after the warranty start date listed in the BIOS). I am presuming dates on files and folders created, modified, or accessed from the point of the initial occurrence of what caused these particular incorrect future timestamps are the only ones affected.
The clock and date were wrong by the exact amount forward as were the install dates for the files I installed, so, as expected, the files were taking their timestamp from the computer's time. I assume whenever the computer date and time were maladjusted is when the problem started. I fixed the time and date, but the files and folders did not adjust their timestamps, again as expected.
1. Are there any particular problems I am not considering which could be caused by the incorrect dates, other than some particular searching and arrangement issues, which in this case I think would be superficial? This type of date information is just descriptive metadata for files and folders, correct?
2. Is there any way to fix this? I cannot think of any, but maybe there is something I am missing, hashing it out in my mind. If the BIOS clock and the Windows date and time settings were separate and the date metadata were generated based on a timer referencing the BIOS clock, then I could see a way to repair this. But, at least on this notebook, a change in one is reflected in the other--I think this is how Windows OSes operate in general. Anyway, any ideas?
3. Finally, after I finish cleaning and repairing the notebook, is there any way to globally reset all of the date metadata on all files/folders to reflect the present? So long as having incorrect future timestamps does not affect operation, then this is superficial, but it is irrationally driving me crazy. If it were my computer, I could not stand it--barely can stand it as it is. I have found a program that lets you reset all of the dates of all files in a folder, or the dates of all folders visible when opening a directory or subdirectory, but not both simultaneously, and so of course not anything that would change the dates of all the files and folders nested within one another from root.
I have a modified Hp vp17 desktop, that has had an upgrade rebuild including replacing the motherboard etc.I am not very good at explaining the system info. but here goes;The CPU is an Intel Core 2 Quad Q9450 @ 2.66 GHz.The OS is Windows 7- 32 bit.RAM is 3.00GB.I am currently using a Wireless Logitec S520 keyboard and mouse however the key labelling is coming off, which doesn't help other members of my family who are not touch typing familiar.I am looking to replace the Logitech keyboard and mouse to a compatible HP Wireless keyboard and mouse or Microsoft Wireless keyboard and mouse combo but don't really know what to look for?