I'm running Windows 7 Professional (RTM) and a Hauppauge Nova T500 tuner card.
My problem is some channels such as Virgin1 always show a black screen, no weak signal message, no audio. The funny thing is if I use the native WinTV programme the channels work fine.
The other problem is sometimes I get a black screen on almost all my channels.
Has anyone got any ideas?
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies View RelatedMy son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedMy computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit
Processor: intel core i5 3.20 GHz
Ram: 8 GB
Graphics card: NVIDIA GeForce GT 220
Graphics card memory: 0.5 GB
Any other ideas?
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies View RelatedI'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View RelatedI just spent hours setting up 7MC with my tv tuner and line up all of the channels to match with the guides manually. I've already perform a full system backup. Is there a way to backup just the 7MC LiveTV contents IE: guides, channel scans etc?
View 1 Replies View RelatedI only have 2 Devices available, one is Realtek Hd Audio (the one with only Stereo, but it has Dolby Surround Sound, idk if that replaces the options of choosing 5.1 or better)And the other one (disabled) is a Digital Optical Output idk what that is, but that has the option of choosing 5.1 surround sound but the sound doesn't work when I set that as default device.I plan on getting a 7.1 gaming surround sound headset (Razer Megaladon) but if my computer doesn't give me the option of choosing 7.1 should I just get some normal gaming headset (Razer Carcharias) this is the laptop I am using; Newegg.com - SONY VPCF116FX/B NoteBook Intel Core i7 720QM(1.60GHz) 16.4" 4GB Memory DDR3 1333 500GB HDD 7200rpm BD Combo NVIDIA GeForce GT 330M
View 2 Replies View RelatedI just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.
View 7 Replies View RelatedI have a Toshiba laptop running windows 7. It has been running like a well oiled machine since the day I got it.I turned it off to watch TV, then when I turned it back on, the screen shows the Toshiba screen for about 1/4th of a second and then goes black.If I hit F8, F10, or F12 nothing shows up.
View 2 Replies View RelatedI have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies View RelatedWhile attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies View Relatedi have an HP Pavillion dv7 with windows7. It is less then 3 months old. Problem- Yesterday the screen went black while i was watching a video, but the sound kept going. so i restarted the computer, and the screen works until you get to the login screen it goes black again. SO i called customer service at hp, and we worked on it for an hour.THe one thing that seems to work is when i go to the device manager, uninstall the display adapters, and restsart in normal mode, then i go and reinstall the ATI device thing in the recovery manager, but everytime after i reinstall the ATI display device thing, it ends up going black a little while later again. lol
View 3 Replies View RelatedI have an Asus M3A76-CM MB with 6 available SATA ports...here is what is being reported in device manager:
ST31000333AS
Location 0 (Channel 2, Target 0, Lun 0)
ST31000340AS
Location 0 (Channel 0, Target 0, Lun 0)
ST32000542AS
Location 0 (Channel 1, Target 0, Lun 0)
in physically looking at the MB, I see that the SATA cable for the 542 is in the 3 position (facing the MB looking down), but is there a way to determine which drive is C: and what is D: (the 542 is being assigned F:, and the CD/DVD is E.
My master boot drive is on Ch0 (IDE) my SSD is on Ch4 (SATA) in the bios. How do I get my SSD to Ch0 so it's seen as the Windows Boot Drive (Master) for Windows to Boot, it is just a matter of it plugged into the right SATA port on the board ?
View 9 Replies View RelatedAbout two weeks ago, Windows Media Center stopped changing channels automatically when a program is set to record. The guide displays "this program will record as part of a series request" or "this program will be recorded", just like normal. I will even get a notification that media center will change the channel to record. However, it never changes and does not record.
Here is what I have done to troubleshoot: I have uninstalled the tuner(physically) & re-installed Updated the drivers for the tuner Ran complete MCE setup again Completely removed device & drivers via control panel Would this be a MCE problem or a tuner card issue?
I was recently forced by my provider to change from analogue to a digital service. I received two basic analogue to digital converters and have them setup on media center (Windows 7). I have IR blasters going from the back of the USB MC dongle to the front of the 2 digital boxes. Problem: I can browse channels no problem when not recording anything. As soon as I begin recording a channel and change channels, it switches over to the second digital box/tuner but it won't change the channels. Media center seems to think it's changing but the instructions never make it back to the digital box. It's like it's never activating the second IR blaster. I switched some of the hardware around to no avail, same results either way. Both digital boxes are identical and both remotes worth with both boxes.
View 1 Replies View RelatedI googled a lot for many days and now I tired of looking and searching but I can't find working link, I want to watch Discovery, History and National Geographic channel, but I can't find them, I only find out some non English History and Discovery channels.
View 2 Replies View Relatedyesterday when i was making log out from my computer, there is no log out screen!! just black screen and mouse cursor, and when i did restart again , no logon screen appears or no any thing in screen , just black screen and mouse cursor too.I was tried every thing and no difference :safe modestartup repairrestore to some point (i dont have a point)upgrade windows or reinstall iti think the things maybe was made this poblem are :i was edited userinit.exe value from registry by deleting the comma from the end of its value. i used Windows 7 manager to make some clean and fixes some things on computer.
View 3 Replies View RelatedI'm running Windows 7 Home Premium.As I brought my computer out of sleep mode the computer had crashed with the screen showing vertical, multicolored lines that vaguely resembled gray.I had to hard restart my computer and after the splash screen, the login screen with all the users never appears, nor does my cursor.Nothing is on my screen except a faint glow indicating that it's active.
View 2 Replies View RelatedWhenever the Windows loadscreen passes the screen goes black and I can move a cursor around the screen. I have had this happen before and fixed it with bootrec.exe but I can't seem to get that to work this time. Safe mode has the exact same black screen problem.I have done chkdsk and sfc scannow - Didn't fix it.When I boot into Kaspersky Rescue from a USB drive it mentions that I need to shut down windows properly before continuing. I would like to do this but I can't.I have tried changing the active partition on information in some of these other threads - It didn't seem to work.All disks are healthy according to the DISKPART and Partition Wizard. I have done the HP hardware diagnostic scans and everything comes up fine.
View 1 Replies View RelatedJust purchased 2 new (refurb) PC's for my wife and I. It's all I could find with Windows 7 still available. They are both HP Pavilion p7-1233w 64 bit Desktops running Win 7 Home Premium SP1.During Windows setup of PC #1, it asked for a restart. When the PC powered back up, it had a black screen from the start (before the Post screen). I power cycled it several times with no luck. Even switched monitors and video cables. The next morning it started normally with perfect video.I assumed the Refurb PC had a problem and set it aside for return.Been setting up PC #2 for a few days now with lots of restarts. All was well, until I did a restart just now. There was the identical problem. Power cycled the unit twice, and still had the black screen.Then I unplugged the PC, and pressed the power button to discharge the capacitors (fans ran for a few seconds). When I returned power and started the PC again, it functioned normally. I've done 10 quick restarts since to try and replicate the problem, but it only happened that once.
I love these PC's, and I love Win 7, so I hate to give them up. But I don't want the video freezing up on me every time I do a restart. I assume now, that PC #1 is not necessarily defective.Since this is occurring before the post screen, I wasn't sure if it could be windows related.
advent roma 3000 is not starting, when I turn it on, only black screen and the sound of movement, which comes on and off.
View 4 Replies View RelatedI got a bad virus on my computer about a week ago. I decided to use my windows 7 installation disc to reformat my disk drives and reinstall windows 7. The installation goes smoothly and I am able to login to windows. But after I install drivers and updates, then restart the computer, I get the "starting windows" screen with the swirling logo. I can hear the chimes that sound when I get to the login screen, but the screen is black. I can make the cursor appear by moving the mouse, but I cant do anything else. I never created a system restore disc, so I dont have that to help me.I have done some tinkering and will tell you what did not work so far.First, like I said, I used the windows 7 install disc to reformat my disk drives. Then, I reinstalled windows. I installed the updates for my graphics card and motherboard. When I restarted, I got the black screen. I restarted the computer and used F8 to do a system repair. This detects no problems. I tried to use the "startup repair" on the windows installation disc. This does not recognize a problem. I have tried it several times. Same result. Next, I tried to use the repair options on the windows install disc. I went to command prompt and typed in: bootrec.exe /fixmbr, bootrec.exe /fixboot, and bootrec.exe /RebuildBcd. (An interesing note: When I used the RebuildBcd command, it said that it detected 0 windows installations.) After the first time I did that, I tried the startup repair and got my first and only error message: "Startup repair cannot repair this computer automaticaly". I checked the details and it said "Problem event name: StartupRepairOffline". If you need the rest of the details, I can provide them. But I tried the repair again, and there was apparently no problem. Yet, still got the black screen.I then reformatted again, deleted both drives, and made new ones. I tried to install windows again, and I can get to my desktop.(One thing I noticed is that before I install updates, the computer is saying that my monitor is a "Generic PnP monitor on standard VGA graphics adapter". I dont know much about computers so this may be normal before installing the graphics card updates.)This time, I was connected to the internet and tried to install the system updates first. After all 120+ updates installed, I restarted and got the black screen again.I decided to use the install disc again to reformat, delete, and recreate the hard drives. This time I tried to install windows on the second hard drive (Disk 1) Again, the install went smoothly. I started installing the graphics card and motherboard drivers, but this time it told me that my disk drive D needed to be formatted before use. I reformatted it (this took MUCH longer than the format option on the install disc), installed the drivers, and restarted. I still cant get into the login screen. Finally, I used the install disc to reformat, delete, and recreate the disk drives. This time I installed windows on the first hard drive (drive 0) again and got to the desktop. Now I tried to install the motherboard drivers first, then restart. I did this and was able to restart and get back to the desktop. Next, I installed the graphics card dirvers, and then restarted. Black screen again.
Here are my computer specs:
Windows 7 64bit OEM
EVGA P55 FTW motherboard
EVGA GTX570 graphics card
Intel i5-760 processor
Intel patriot 8gb ram
his problem started with XP and I decided to upgrade to win 7 pro.
My PC has a black screen on wake up more times than not. Wake up is set for a login screen normally. My settings are screen saver after 10 mins then send screen to sleep in 20 mins, no hibernation mode, rest machine remains alive, runs 24/7 normally.
I have swapped the power supply and graphics card with ones that work in the same model PC and no joy.
I have windows 7 32 bit. I am using a Hauppage HVR 2250 dual tuner card.What is odd is that a few channels will only let me watch them live if I record them. As soon as you hit record you can watch the channel. Otherwise it says "service is unavailable".I can even hit record then stop the record and I can keep watching the channel. Also one other channel works live but when you hit record it says"service is unavailable".It was not always like this as every channel scanned and found worked flawlessly. We have a great outdoor antanna and are very close to the TV towers (around 5 miles away). So I highly doubt it's a signal strength issue all the sudden.
View 2 Replies View RelatedI am trying to set up a Set Top Box connection in Windows Media Center on W7x64, but I can't get the Windows Media Center remote to change the channels in the setup. I have the USB IR transceiver with an IR blaster in front of the STB's IR receiver, and when going through the setup WMC states it has the remote code correct, but it doesn't work. I have fiddled with every conceivable setting, from manually coding the STB's remote to picking out all of the possible code's from a list, but it doesn't work. I have also tried all of the immediate settings (number of channel digits, pressing enter or not), and it's still a no go. From what I've read, other people have had issues with this particular STB. It seems that most people's answer was just to trade it in, but I don't think that is an option at this point since Comcast has been using this box for over a year now.
Also, I thought I should mention that the USB IR transceiver does indeed pick up the STB's signals, as it flashes when I use it. Maybe an IR to IR cable from the back of the STB to the USB IRt would work?
I am using Internal Tv Tuner Card. The software came along with that card is not much good.
I am not able to re-arrange the channels. I am trying to use Media Center, which detects the card. But it shows 0 channels found.
Zebronics Internal TV tuner card ZEB - I2010