I see a lot of complaints about games black screening. This has more than one form and one form of it is due to improper video drivers so we will put that aside.
I always get a black screen after launching COD5 however if you wait a few moments the black screen goes away and the game plays fine from that point forward.
Does anyone know the cause and/or a solution to the black screen issue?
I have a very high ping while playing call Of duty I set my priority to low through the task manager and it helped some but still I get this awful skip lag thing. I live in a building where the internet is provided for me and I cant access the router configuration to change the NAT from strict.
View 1 Replies View Relatedi want to play it on my pc windows 7 ultimate x32
View 1 Replies View Relatedi didnt know where to put this thread. Anyways, when i try to instal Call of Duty 2 on my windows 7 i get an error that says Library not registered, and i have to go to Task manager to close it. CoD2 is original, no cracked **** and i downloaded the evaluation copy of Windows 7 from microsoft.
View 7 Replies View RelatedAs above,im using integrated ATI Radeon HD 3200 and just doesn't cut it.
What would you suggest to run call of duty etc
I don't want to spend mad money either though
I'll probably buy from here
http://www.overclockers.co.uk/productlist.php?groupid=701&catid=56
And yes i have a spare PCI slot.
There is BIG LAG when I Play NFS Underground 2, or just GTA San Andreaes. Cal Of Duty 1,2 Lag too.
View 9 Replies View Relatedpurchased call of duty 2 and tried to install my laptop. When i click the auto run or install button a box appears saying library not found. Then multiple boxes open up saying acess violation 000000.
View 1 Replies View RelatedAll of the Call of Duty games do not workPC multiplayerMW3 computer freezes when I click the desktop iconMW2 modern ware fare, has no games players availableBlack ops the menu is there with an arrow and a blue ring and nothing clicks to start the gameIt also happens when I go into Steam directly I paid for a the new maps with the DLC and can't use that either
View 2 Replies View RelatedI have installed the origonal COD - Game of the Year on a Windows 7 Pro 64bit based PC. The game plays great until I get to the "Soviet Union" missions. Then it exits stating "CODSP.exe has stopped responding". I've searched for answers and tried several suggestions like running as Administrator, Normal, and Safe Mode but no joyIt always stops when loading in the Soviets.....and always works fine up to that point. The CD is in like new condition. When Re-opening the program, the message "COD didn't shut down properly, would you like to run in Safe Mode" comes up.....The PC is Intel D975XBX MB, XFX GT7600 video card, Intel 3 GHz Pentium D. I'm in Single Player mode and have reinstalled COD twice without renaming files.
View 3 Replies View Relatedtell me the config for playing cod2 with the help of 3d analyzer
View 2 Replies View RelatedBought Call of Duty World at War on steam a few days ago and have been having a lot of trouble trying to play. The game crashes at start up. I have tried a few fixes like starting up in compatability mode and changing the sound to 44100 and 48k but they dont work. Occasionally when I play around enough it will work but next time I try to play it is back to crashing.
View 1 Replies View RelatedI have bought a Dell Inspiron N5110 recently in Feb 2012, with following specifications: i7 processor, 750 GB HDD, 4GB RAM, 1GB NVidia GT525M Graphics Card. It has Windows 7 Home Premium Service Pack 1. I installed Intel Graphics driver and the nvidia graphics driver version given along with the laptop. (Version 268.30)
After installation in my Device manager there are two graphic cards shown:
1) Intel HD Graphics Family
2) NVIDIA GeForce GT 525 M
The NVIDIA GeForce shows as Code 43 error stating "Windows has stopped this device because it has reported problems. (Code 43)" in Device status. When I tried opening the NVIDIA control panel it says "You are currently not using a display attached to an NVIDIA GPU". Then I installed Call of Duty - MW3 Game and the performance of the game is not so great. I visited nvidia website and searched for graphics driver updates and found the newer version (296.10).
I downloaded and installed it. This time the Code 43 error didn't happen and the control panel also is working. But after installing new driver, I tried playing the game again and this time the system gave the BSOD error. I tried changing the settings so that my game takes only the NVIDIA processor but still it gave BSOD error while modifying the settings in NVIDIA control panel.
Then I tried the following combinations and none worked:
1) Intel Graphics + NVIDIA old version - Code 43 error
2) Intel Graphics + NVIDIA new version - BSOD error
3) Intel Graphics Disabled + NVIDIA any version - Bad graphics with 800 X600 resolution. Game didn't even start.
4) Intel Graphics uninstalled + NVIDIA any version - Bad graphics with 800 X600 resolution. Game didn't even start.
Even my HD movies/half HD movies in my laptop stutter sometimes and I have no clue why it happens. My Laptop is still under warranty and I would like to know what should be the solution for my problem. Please find attached memory dump description folder as mentioned in the rules. I tried generating the performance report but it gave an error stating "error in generating the report".
Does anyone know if Win 7 XP mode (Pro or Ultimate) play the games Call of Duty 2, Phantasmagoria or Amber Journey Beyond?
View 2 Replies View Relatediv been playin call ov duty 4 4 ages, then all of a sudded i had corrupted file/memory 81355,so i went n bought new ram which fixed that now all i get is constant lag?
View 1 Replies View RelatedI can´t get COD UO to run and even that i´v the original cd´s, my pc cannot catch it?
View 1 Replies View Relatedi had a big interest on this laptop..but i just want to know whether this laptop is suitable or not to play games such as PES2012 and Call of Duty Modern Warfare?
View 1 Replies View Relatedwhy i cant make a video call
View 1 Replies View Relatedi could play games fine in x32 but i seem to be having troubles in x64, i have tried a number of things (compatibly mode including when installing, reinstalling without game updates, with updates)
i installed 2008 x64 redistribution pack and made no difference.
tried the windows update 179xx wddm1.1 display drivers (ppfft)
tried earlier disp drivers
uninstalling physx
crysis (with or without game updates) locks in the menu, thats in the rare occasion it does make it into the menu otherwise it sits at a black screen until you press space bar to close the inaccessible "this programme has stopped responding" dialog box
cod4 mw locks at mission loading screen and needs forced reboot
cod5waw when i select to start a mission, select difficulty and it just goes back to the mission select page no matter how many times you try it??
i use my system mainly for gaming so this is really doing my head in.
i have nforce 20.08 forceware drivers
182.06 geforce drivers
along with the latest physx software
all 64bit drivers.
running on 790i ultra, 9800gx2 quad sli, q9550, 4gb ddr3
rest of specs are in my profile.
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies View RelatedMy son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedMy computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit
Processor: intel core i5 3.20 GHz
Ram: 8 GB
Graphics card: NVIDIA GeForce GT 220
Graphics card memory: 0.5 GB
Any other ideas?
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies View RelatedI'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View RelatedI just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.
View 7 Replies View RelatedI have a Toshiba laptop running windows 7. It has been running like a well oiled machine since the day I got it.I turned it off to watch TV, then when I turned it back on, the screen shows the Toshiba screen for about 1/4th of a second and then goes black.If I hit F8, F10, or F12 nothing shows up.
View 2 Replies View RelatedI have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies View RelatedWhile attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies View Relatedi have an HP Pavillion dv7 with windows7. It is less then 3 months old. Problem- Yesterday the screen went black while i was watching a video, but the sound kept going. so i restarted the computer, and the screen works until you get to the login screen it goes black again. SO i called customer service at hp, and we worked on it for an hour.THe one thing that seems to work is when i go to the device manager, uninstall the display adapters, and restsart in normal mode, then i go and reinstall the ATI device thing in the recovery manager, but everytime after i reinstall the ATI display device thing, it ends up going black a little while later again. lol
View 3 Replies View Related
