Black BSOD, Dxgkrnl.sys+5d000 While PC Is In Any Application Or Idling?
Dec 15, 2012
It started about a month ago with dxgkrnl.sys+5d000 causing a black BSOD, would just randomly reset my system (all fans 100% exhaust for a few seconds, then boot back up)
My specs:
Intel i5 3570k @ 4.2ghz using MSI OC Turbo Genie. (With corsair H80 cooler)
8GB of 2133mhz G.Skill ram
MSI Z77A-GD65 Motherboard
Gigabyte Windforce x3 GTX 670
850W OCZ ZX 80+ Gold PSU
Firstly when this was happening, it only happened inside games... at 99% GPU usage. So after testing the drivers, reinstalling the OS, running memtest, reseating ram, changing PCI-E slots, changing my power extender lead from a cheap 10bar to an expensive 4bar plug, making sure both CPU and GPU temps don't go above 60c... I was out of ideas and sent the GPU back for RMA. RMA was accepted as faulty, a new one was sent out 3 days later, put it in... had some issues with PEG in the BIOS, but got it sorted and a video link was picked up. Worked fine for the last week, now the same exact problem is back.However this time it just happens randomly, even when I'm idling. Done more stress testing on the GPU, did 10hours at 99% usage under furmark with no problems. I'm sceptical about it being another GPU issue due to the data I've gathered.However, the system works fine with onboard graphics... nothing crashes randomly. I've exhausted all tests to no avail, I'm thinking the motherboard is faulty?
View 3 Replies
ADVERTISEMENT
May 29, 2012
So after upgrading my PC (apart from the graphics card) all was well until today, a good 2 weeks after doing so, I suddenly get a BSOD after I thought everything was fixed. Codes and stuff attached, system spec in my profile. I made sure to update all my chipst/USB/etc drivers the second I put the PC together. [code] I did notice that somehow my Catalyst Control Center somehow updated itself to 12.4 from 12.3 ...don't know if that has anything to do with it. Also it's been unnaturally warm for England...GPU is cacking itself at around 53 degrees C, dunno if that's bad or normal?
View 5 Replies
View Related
May 9, 2012
I have been getting a BSOD in my newly installed systemand ive included the files in this post as you asked for before postingI am running Win 7 x64 OEM i bought it together with the parts for my system which you can see in my signature. it is only nearly 4 weeks old, i did put the system together myself for the first timeBtw the OS is installed on my Corsair SSD.
View 9 Replies
View Related
Oct 17, 2012
My PC has been stable since I built it 3 months ago. However recently I have been getting BSODs that only identify the kernel as the application that caused the issue. They state SYSTEM SERVICE EXCEPTION and 0X00000003B as further information. After some searching I realized these are too general to pin down the issue without some experts looking at the minidump files.The only thing I can think of that's different now than before is that before I didn't have Win 7 SP 1 (I had one of those borked installations, had to do the full repair install and now I have windows 7 sp1 installed)
View 3 Replies
View Related
Jun 7, 2011
I just installed 8 GB of RAM into my rig and checked the task manager and it says I use around 2.2 GB of memory while idling. Is this normal?
View 2 Replies
View Related
Sep 6, 2012
I keep getting a bluescreen like every half hour, i don't know what's wrong. i teared apart my pc a few times but i can't seem to find out what's the problem.
There are a few files in the minidump that i think may cause the problem, those are:
ntoskrnl.exe (first BSOD)
-------------------------
ntoskrnl.exe
fltmgr.sys
fileinfo.sys (second BSOD
-------------------------
ntoskrnl.exe
halmacpi.dll
usbehci.sys
USBPORT.sys (third BSOD
-------------------------
I had this problem first when I had Windows XP, so I thought that installing a fresh Windows 7 may fix this problem.
View 8 Replies
View Related
Feb 9, 2012
I have been getting random reboots on my computer with a Kernel-Power ID 41
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
[code]....
Computer Specs:
Asus Crosshair V Formula
AMD 1090T @ 4.0GHZ (Same stable frequency for the past year) (Prime 95, LinX, AMD Over Drive Stable)
4GB/4 16GB Corsair Vengeance 1600 (Mem Test shows no error)
Corsair H60 Push/Pull
Corsair Enthusiast Series TX650 PSU
View 8 Replies
View Related
Jul 22, 2012
I've had my dv7 for nearly two years, and it has worked well the entire time. Recently within the last month, when preforming normal tasks like browsing the web or watching videos, the CPU usage would spike to 100% and stay there, rendering the computer useless. Every time this happens I would shut it down and wait a full day. This allowed for about 15 minutes of smooth running time before another spike.I have run CCleaner, two full system scans using Norton 360 to no avail, updated all BIOS, cleaned out the fan and heatsink, and checked the power settings to see if the processor had been changed to use a minimum 100%.
Computer specs:
Processor: Intel i5 M 460 @ 2.53 GHz
RAM: 4GB
OS: Windows 7 64Bit
Gfx: HD Radeon 5650 (integrated)
View 2 Replies
View Related
Feb 19, 2013
My laptop kept shutting off on me within 5 minutes of use about a month ago due to overheating. I took the laptop apart and noticed the fan wasn't working so I ordered a new one and installed it. Now the fans working great and the computer runs, however, the processor seems to be idling high. It seems to constantly increase processor usage even when no programs are running and back again to a base line in a constant pattern as can be seen from the attached cpu usage chart. I have disabled pretty much everything from starting on windows start up and have scanned for viruses and defragged my disk but to no avail. My laptop has a core i3 processor.
View 8 Replies
View Related
Jan 7, 2012
I bought an ASUS G73JH gaming laptop 2 months ago and just started getting this random, inexplicable error. It's happened twice this last week and I have lost a considerable amount of unsaved work because of it. What happened the first time was I put my laptop to sleep in order to do something else and when I came back it had shut down by itself. After booting it back up the first thing that was displayed was the window in the images above. I don't know if my computer actually had a BSOD before it shut down because I was not there to see what happened. Second time this happened, I just left my computer at idle without putting it to sleep and left the room. My laptop is configured to go to screensaver after 10 minutes and sleep after 15. When I came back this time, my power button was not blinking, meaning the computer was not asleep, but the monitor had shut off and could not be turned back on with the monitor on/off toggle.
I had to manually restart the computer by holding the power button, and when it booted back up again the same window appeared. Yet again, I don't know if my computer actually had a BSOD because this time the monitor was turned off. P.S. My system specs are in the sig below and I've attached the requisite .zip file. No components are overclocked or otherwise modified at the hardware or software level.
View 3 Replies
View Related
Oct 26, 2011
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
View 2 Replies
View Related
May 23, 2012
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
View 1 Replies
View Related
Jan 6, 2012
The application failed to initialize properly (0xc0000142) Click on OK to terminate the application.The only option is to click ok. I am deathly afraid to turn off my computer because my brother recently did and that caused it to freeze at the blue HP startup screen, but thats another thread. I get this error whenever I launch anything. I can't even open up the task manager. I really need help. I don't currently have a way to back up my stuff either but I am working on it. By the way, I don't know that my brother was having the same error message as i was or if he was having any error messages. I use zone alarm full security suite if that helps at all, I don't know if it deleted a registry file or something.
View 4 Replies
View Related
Sep 11, 2012
When I shutdown, right near the end the screen goes black as one would expect and then for a fraction of a second I get BSOD and it will restart and let me know that it BSOD'ed. It's a new install of windows 7 on a new PC that is working well under stress testing. And i haven't messed with much but xbmc and some light overclocking without voltage changes. I've uninstalled anything recent and some tuners that the mobo manu had on their support page.
View 1 Replies
View Related
Aug 15, 2010
I tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll
themeui.dll
themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
View 2 Replies
View Related
Nov 25, 2011
I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back.If i remember properly, this happened when I tried installing some wallpaper.system seems to be working finw with all applications, but this message box is quite annoying.
View 1 Replies
View Related
Oct 31, 2011
This Dell Vostro is 2 years old, it has Windows 7 installed. When the internal wireless card is turned on, it connects alright for about 5 minutes and then the computer will BSOD or Black Screen then restart. Ethernet works fine.It has a strange behavior history.Before reformat, I ran Malwarebytes which detected malware in Adobe CS5, after clearing that up it stopped BSODing for a day of constant use. Then the wireless card stopped working at all. Windows could not even detect it for a few days. After the Windows reformat and reinstall it started working for half a day. Had the latest Dell driver installed for it.Today it BSOD's and Black screens after a few minutes. We have to turn off the radio toggle to keep it from crashing Windows.There was liquid spill about a month and a half ago. It was about an 1/4 cup of wine, attended to promptly. Within seconds of the spill it was shut down and put in front of a dehumidifier for a few days and turned upside down. It is possible it corrupted the card or card slot, but we have no other issues with the computer. I don't suspect this but it is worth mentioning. Our next step is to purchase a new card, examine for corrosion on the slot or card, but.......I have to say I still suspect a software conflict.
What has already been done:
Reformated and reinstalled Win 7
Uninstalled and reinstalled the card drivers
Updated all service packs and win updates.
View 2 Replies
View Related
Jan 28, 2013
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
Additional information about the problem:
BCCode:116
BCP1:FFFFFA800C9924E0
BCP2:FFFFF8800616DADC
[code]....
The problem I am having is this: Screen on Windows 7 pc 64 bit turns to black and everything freezes monitor light turns from blue to orange and my desktop is gone I have to hit the power button on the tower to shutdown and power it back up again. Happens every couple of hours or so. If I open up skype to make a phone call it does this to my computer as well.
View 8 Replies
View Related
Aug 20, 2012
I installed Windows 7 on my computer (Upgraded from windows xp) and everything seems well. However, at random times it (sometimes it flickers black) goes into BSOD then restarts again to windows,,the DMP shows different kind of problems like:
Memory Management Failure "IRQL_NOT_LESS_OR_EQUAL" System Service Exception
I recently bought two 2gb ddr2RAM and I am now using it.
View 6 Replies
View Related
Mar 9, 2012
And now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it.
View 2 Replies
View Related
Dec 5, 2011
I was just wondering if it is possible to reverse engineer a 32-bit application and recompile it as a 64-bit application. If so, would it still function?I don't know if talking about reverse engineering is acceptable in this forum or not. If not, my apologies.Also, I don't exactly know how "legal" it is or if it's against any EULAs.I'm a heavy browser user. I use Firefox Nightly and constantly have several tabs open. I also run several different applications at once and occasionally Skype. I'm CONSTANTLY hitting the 32-bit barrier for RAM (can't remember if it's 3.1, 3.2 or 3.3 GB) and I still have more RAM on my system. I'm thinking the video quality on Skype starts going south when I run low/out on addressable memory since it's a 32-bit application
View 9 Replies
View Related
Jul 9, 2012
Recently my pc starded giving me a Black screen with interactive mouse pointer after the windows logo. I think the official term
View 1 Replies
View Related
Dec 6, 2012
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8117 Mb
Graphics Card: ATI Mobility Radeon HD 5470, 1024 Mb
Motherboard: ASUSTeK Computer Inc., K42Jr
Antivirus: Norton Internet Security, Updated and Enabled
I would get a random black screen while playing an online game on my laptop (this happens randomly but usually 15-30mins after starting Windows and start playing the game). After the black screen appeared, it would automatically reboot to this windows error recovery page with options to go into safe mode (networking/command prompt) or just boot windows normally.I chose to boot Windows normally but after getting into Windows 7 and started playing a while, a random BSOD would appear. It has happened for 2-3 days straight. The attached is the mini dump.
Note: I did not install anything new to my laptop, I have ran chkdsk and sfc /scannow and found nothing.I have no idea what caused the black screen and the BSOD.
View 4 Replies
View Related
Jan 1, 2012
my acer aspire 5680 have a black screen problem whenever i try to open the laptop. when i open the laptop there will be beep-ing sound and then nothing will appear on my laptop screen. i suspect this is a black screen problem.
View 9 Replies
View Related
Mar 17, 2012
then the desktop finally loads. It only lasts about 60 seconds before BSOD'ing again. Safe Mode seems ok, but I was in the process of typing up this thread when safe mode shut down on me randomly. I've tried restoring to earlier points and running malware scans. Minidumps are included.
View 9 Replies
View Related
Nov 11, 2012
first I was facing BSOD. So I tried going in by every type of safe mode, But it doesn't work, I just go to a black screen with moving cursor and I can't Open the Task Manager.So I tried system restore, failed with the CD. Then I tried the Grub4dos thing It failed as well. It just brings me to the black screen with white cursor.Also when I start in safe mode, it stucks at classpnp.sys and after awhile It goes to BSOD and reboots. By the way this all started when I installed a game, Dishonored.
View 1 Replies
View Related
May 1, 2009
How can I disable the "locked" screen when I return to my computer (after idling for a while) ? I thought I had downloaded 7100 (and burned it to a disk) but after installing it, it was actually 7077. When I had the 7000 installed I didn't have this problem. I just touch the keyboard and my desktop would show again.
View 3 Replies
View Related
Aug 5, 2011
I'm using Windows 7 Ultimate. I've been using it for some time without problems, but this morning I was unable to get on the Internet. Yesterday I'd installed an update for ZoneAlarm which I thought was probably the problem, so I uninstalled in and downloaded and installed PC Tools Firewall Plus instead. no my computer will connect to the Internet OK, but whenever I try to open most programs, I get the following error:"The application was unable to start correctly (0xc0000142). Click OK to close the application."The only two exceptions I've found are Microsoft Security Essentials and Internet Explorer which both work fine.
View 4 Replies
View Related
Aug 10, 2012
I'm trying to run a .bat file but when i start it cmd won't start and it gives the error message"The application was unable to start correctly (oxc0000142). Click OK to close the application."
View 2 Replies
View Related
Jan 6, 2012
I have an application that is set to always be on top of all others. Ive looked through all the options in the application and there is not one to make it not be on top of all other windows. I have also asked the maker of such software and they have said that there is no way to not make it ontop. does anyone know a way to make another application come ontop of this one or a way to get it to where I can use the other application? the application Im using is a medical application and the manufacturer is not helping at all. the application I want to use isnt harmfull and it is job specific.
View 2 Replies
View Related
Feb 22, 2011
I need to run a program from a server in a mixed Windows XP and Windows 7 environment. The current policy is to have the Windows 7 UAC turned to 'Never Notify' as the logon script needs to make changes to registry, etc. The program will only work with Windows 7 if the UAC is turned on. Is there a way of activating the UAC for this one program only?
View 4 Replies
View Related
