So after upgrading my PC (apart from the graphics card) all was well until today, a good 2 weeks after doing so, I suddenly get a BSOD after I thought everything was fixed. Codes and stuff attached, system spec in my profile. I made sure to update all my chipst/USB/etc drivers the second I put the PC together. [code] I did notice that somehow my Catalyst Control Center somehow updated itself to 12.4 from 12.3 ...don't know if that has anything to do with it. Also it's been unnaturally warm for England...GPU is cacking itself at around 53 degrees C, dunno if that's bad or normal?
I have been getting a BSOD in my newly installed systemand ive included the files in this post as you asked for before postingI am running Win 7 x64 OEM i bought it together with the parts for my system which you can see in my signature. it is only nearly 4 weeks old, i did put the system together myself for the first timeBtw the OS is installed on my Corsair SSD.
My PC has been stable since I built it 3 months ago. However recently I have been getting BSODs that only identify the kernel as the application that caused the issue. They state SYSTEM SERVICE EXCEPTION and 0X00000003B as further information. After some searching I realized these are too general to pin down the issue without some experts looking at the minidump files.The only thing I can think of that's different now than before is that before I didn't have Win 7 SP 1 (I had one of those borked installations, had to do the full repair install and now I have windows 7 sp1 installed)
It started about a month ago with dxgkrnl.sys+5d000 causing a black BSOD, would just randomly reset my system (all fans 100% exhaust for a few seconds, then boot back up)
Firstly when this was happening, it only happened inside games... at 99% GPU usage. So after testing the drivers, reinstalling the OS, running memtest, reseating ram, changing PCI-E slots, changing my power extender lead from a cheap 10bar to an expensive 4bar plug, making sure both CPU and GPU temps don't go above 60c... I was out of ideas and sent the GPU back for RMA. RMA was accepted as faulty, a new one was sent out 3 days later, put it in... had some issues with PEG in the BIOS, but got it sorted and a video link was picked up. Worked fine for the last week, now the same exact problem is back.However this time it just happens randomly, even when I'm idling. Done more stress testing on the GPU, did 10hours at 99% usage under furmark with no problems. I'm sceptical about it being another GPU issue due to the data I've gathered.However, the system works fine with onboard graphics... nothing crashes randomly. I've exhausted all tests to no avail, I'm thinking the motherboard is faulty?
Computer Specs: Asus Crosshair V Formula AMD 1090T @ 4.0GHZ (Same stable frequency for the past year) (Prime 95, LinX, AMD Over Drive Stable) 4GB/4 16GB Corsair Vengeance 1600 (Mem Test shows no error) Corsair H60 Push/Pull Corsair Enthusiast Series TX650 PSU
I've had my dv7 for nearly two years, and it has worked well the entire time. Recently within the last month, when preforming normal tasks like browsing the web or watching videos, the CPU usage would spike to 100% and stay there, rendering the computer useless. Every time this happens I would shut it down and wait a full day. This allowed for about 15 minutes of smooth running time before another spike.I have run CCleaner, two full system scans using Norton 360 to no avail, updated all BIOS, cleaned out the fan and heatsink, and checked the power settings to see if the processor had been changed to use a minimum 100%.
Computer specs: Processor: Intel i5 M 460 @ 2.53 GHz RAM: 4GB OS: Windows 7 64Bit Gfx: HD Radeon 5650 (integrated)
My laptop kept shutting off on me within 5 minutes of use about a month ago due to overheating. I took the laptop apart and noticed the fan wasn't working so I ordered a new one and installed it. Now the fans working great and the computer runs, however, the processor seems to be idling high. It seems to constantly increase processor usage even when no programs are running and back again to a base line in a constant pattern as can be seen from the attached cpu usage chart. I have disabled pretty much everything from starting on windows start up and have scanned for viruses and defragged my disk but to no avail. My laptop has a core i3 processor.
I bought an ASUS G73JH gaming laptop 2 months ago and just started getting this random, inexplicable error. It's happened twice this last week and I have lost a considerable amount of unsaved work because of it. What happened the first time was I put my laptop to sleep in order to do something else and when I came back it had shut down by itself. After booting it back up the first thing that was displayed was the window in the images above. I don't know if my computer actually had a BSOD before it shut down because I was not there to see what happened. Second time this happened, I just left my computer at idle without putting it to sleep and left the room. My laptop is configured to go to screensaver after 10 minutes and sleep after 15. When I came back this time, my power button was not blinking, meaning the computer was not asleep, but the monitor had shut off and could not be turned back on with the monitor on/off toggle.
I had to manually restart the computer by holding the power button, and when it booted back up again the same window appeared. Yet again, I don't know if my computer actually had a BSOD because this time the monitor was turned off. P.S. My system specs are in the sig below and I've attached the requisite .zip file. No components are overclocked or otherwise modified at the hardware or software level.
How can I disable the "locked" screen when I return to my computer (after idling for a while) ? I thought I had downloaded 7100 (and burned it to a disk) but after installing it, it was actually 7077. When I had the 7000 installed I didn't have this problem. I just touch the keyboard and my desktop would show again.
I am writing this right now because after the last BSOD it said "Windows can not start" and I had to restore to when it was previously working. So up until that point this is what I did.Since working with computers almost my entire life I know most BSOD are due to either bad memory, drivers, or bios. I started there and updated my nvidea drivers but it happened again. I moved to the motherboard bios.I did find a newer one on there and using ASUS tool I flashed the BIOS. Same thing still happened. Next I ran memtestx86 for 8 hours and it returned no errors.At this point I just decided to look for newest drivers for everything. One thing that happened consistently was that my wireless USB adapter from Cisco had to be unplugged and plugged back in for it to work. I went there first, reinstalled the drivers but still the same thing. I thought maybe it was my hard drive. I downloaded Seagates Utility tool and ran all the tests and they all passed fine. I ran defrag just for good measure along with windows version of the mem test and that passed as well. I still continued to get the BSOD and I have to tell you I'm irritated and also stumped.
Next I moved onto software. I have been using AVG free for years but I know virus programs do some crazy stuff and I got rid of that. Turned on windows defender. I decided that since the wireless adapter didn't work after these crashes maybe lets just go to a direct wired connection. I disconnected the cisco wireless adapter and I'm just using a direct connect right to my router.These come at random times.. nothing I do can trigger it. It can stay on for days and not crash and then there are times it can be up for 10 min and crash.Some of you might notice that in the CPU-Z screenshots I had to take the screenshot with the error underneath. Every time I chose either of the two slots it crashed the program.I have not done anything internally besides add some neon to my computer which does not connect to the board at all.I have seen IRQL blue screen once so I even went as far to go into the power settings for windows and make sure the usb and everything never went into any kind of "standby" mode.
I believe this is still under warranty and I would like to go in with good information if I need to challenge and get new hardware if that's what it is.On a side note I have not touched the memory physically. I know some suggestions were to reseed the memory and chip but In my opinion something that has been working for months that never moves off my desk and is never basically touched besides the power button shouldn't mean something just came loose after 4 months of owning it.Again that's just my opinion. I have removed AVG, Ad-Aware, Some webcam motion detector software (which was a joke) and the only thing that was really installed was Skyrim.
1 x Case CoolerMaster HAF 932 Full Tower Gaming Case - Black 1 x Case Lighting Liquid Neon Thunder Pattern Light - Red 0 x iBUYPOWER Labs - Noise Reduction None 0 x iBUYPOWER Labs - Internal Expansion None 1 x Processor Intel� Core� i7-2600K Processor (4x 3.40GHz/8MB L3 Cache) 0 x iBUYPOWER PowerDrive None 1 x Processor Cooling Asetek 550LC Liquid CPU Cooling System (Intel) - ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow) 1 x Memory 8 GB [4 GB X2] DDR3-1600 Memory Module - Corsair or Major Brand 1 x Video Card NVIDIA GeForce GTX 580 - 1.5GB - Single Card 1 x Video Card Brand === High Performance === EVGA Brand Video Card Powered by NVIDIA 1 x Free Stuff [Free Game Voucher] - Dungeon Siege 3 - Free with Purchase of NVIDIA GeForce GTX 550 or above 1 x Free Stuff [Free Game Download] - Just Cause 2 - Free with Purchase of NVIDIA Video Card 1 x Motherboard [SLI] ASUS P8Z68-V -- 3x PCI-E 2.0 x16, On-Board Bluetooth, Lucid Virtu Technology 0 x Intel Smart Response Technology None 1 x Power Supply 1000 Watt -- CoolerMaster RSA00-AMBAJ3-US 1 x Primary Hard Drive 1 TB HARD DRIVE -- 32M Cache, 7200 RPM, 6.0Gb/s - Single Drive 0 x Data Hard Drive None 1 x Optical Drive [12X Blu-Ray] LG BLU-RAY Reader, DVD�R/�RW Burner Combo Drive - Black 0 x 2nd Optical Drive None 0 x Flash Media Reader / Writer None 1 x Meter Display NZXT Sentry LX Aluminum Fan Control, Clock, and Temperature Display 0 x USB Expansion None 1 x Sound Card 3D Premium Surround Sound Onboard 1 x Network Card Onboard LAN Network (Gb or 10/100) 1 x Operating System Microsoft Windows 7 Home Premium + Office Starter 2010 (Includes basic versions of Word and Excel) - 64-Bit 1 x Keyboard Thermaltake eSPORTS CHALLENGER PRO Gaming Keyboard 1 x Mouse Thermaltake eSPORTS BLACK Professional Gaming Mouse 1 x Monitor 27" LCD 1920x1080 -- Sceptre X270W-1080P 0 x 2nd Monitor None 0 x Speaker System None 1 x Headset Thermaltake SHOCK Spin Gaming Headset - w/ Ergonomic Shaped Velvet Ear Cushions, Neodymium Magnet Speakers, In-Line Volume Controller & Independent Microphone Box 1 x Video Camera Connectland 1.3MP USB Interface WebCam 1 x Advanced Build Options iBUYPOWER Specialized Advanced Packaging System - Protect your investment during transportation! 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Achieve exceptional airflow in your chassis 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Basic Pro Wiring 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Power Package (Individually Sleeved 24-pin ATX, 8-pin CPU, and SATA Drive Power Cabling) 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Video Package (Individually Sleeved 8-pin and 6-pin PCI-E VGA Power Cabling) 0 x Case Engraving Service None 1 x Warranty Standard Warranty Service - Standard 3-Year Limited Warranty + Lifetime Technical Support 1 x Rush Service Rush Service Fee (not shipping fee) - No Rush Service, Estimate Ship Out in 5~10 Business Days
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
I started getting BSOD two weeks ago. As far as I can remember the first time I had a BSOD was on the day I installed Max Payne 3 (I read somewhere that the some guy had also this problem when he installed max payne). There were two occasions that I got a BSOD upon starting Max Payne 3. But lately I'm getting BSOD when doing low-load stuffs like browsing with no other apps opened. I've already done memtest with 10 passes with no errors. I'm 24 hours prime95 stable. I just don't get it! I've manually set my timings for my ram. I'm not doing any overclock. Everything is on stock settings.
I am brand new to this site so forgive me if I miss a step. I was wondering if someone who is good at debugging dump files could give me a second set of eyes on these 2 I will attach. One BSOD is DRIVER_POWER_STATE_FAILURE (ntoskrnl.exe) and the other is UNEXEPECTED_KERNAL_MODE_TRAP (ntoskrnl.exe).I have this problem across 15 identical laptops with fresh installs of Win 7 Pro 64Now my guess is this will boil down to a BIOS upgrade, but if there are driver conflicts within these dump files
I am the developer of a driver for a network adapter device that does scatter-gather DMA. Driver is not newly developed, but has had some recent changes.My client has a puzzling BSOD on one x64 machine after about 18 hours of successful operation. My x64 Win 7 machine runs fine forever. Client's box crashes in seemingly random places that indicate mem corruption.Mem test on machine was clean. Minidump is attached. WinDbg stack doesn't trace back to my code - it just shows the calls to handle the exception. Any clues y'all can see?System info from WinDbg:Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product:WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506One difference between client's x64 and mine: Theirs has a valid DMA MapRegisterBase pointer from a AllocateAdapterChannel call, where mine (and my x86 systems) always have a null DMA MapRegisterBase
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
Windows 7, 64bit, volume license (though OEM on the machine is also windows 7 64bit)1 month old hardware (10 days since I added memory). 18 month old OS install (backed up and restored, and drivers updated to new hardware)(Note that the older BSODs in the zip file are from old hardware)
I was having many random bluescreens on my old home build. I upgraded my Videocard to an Nvidia GTX 550 Ti thinking that it was videocard related. After fresh install I'm still getting BSODs.
Over the past months I have encountered a BSOD roughly every month and I want to get rid of it. The BSOD happens at random (at least as far as I know), not with specific tasks.This morning I started looking for the error and found that turning verifier ON might help in identification. I did this and rebooted a couple of times, every time with the same BSOD occuring during the boot stating something about dne64x.sys
System specs:
Windows 7 Professional x64 full retail version +/- 8 months old system, OS age is the same
I never used it heavily at the start and assumed it was just a driver and that i'd figure it out later.Well; now is later and I can't figure it out.I've done a re-install of the OS (HP recovery)This system is about a year old and is an HP Pavilion dv6 laptop with AMD Phenom II N850 Triple Core @2.2 ghz 6 gig memory 64 bit Windows 7 Home Premium.
I just bought all my parts, and I can't seem to get the computer stable. It is constantly BSOD or freezing and crashing during games. I've attached the SF diagnostic report for one of the dumps i guess.
Two dell support technicians have said to go to factory settings butSpecs:64 bit windows 7 home premiumIntel core i3ATI Mobility Radeon HD 4330Service pack 1Any other info you want, just let me know. I'm so desperate for a solution that isn't a fresh re-load of windows.
This is how to Fix Windows 7 BSOD.Restart the computer and keep pressing F8 until the "Advance Boot Options" menu comes up.Use up and down arrow buttons to navigate the menu, select "Safe Mode" and hit EnterThis time you won't see the computer blue screen error.When the welcome screen comes up select Administrator and enter administrator's password(if you have one).Click on the START button and navigate to the Accessories folder. There you will see a folder entitled "System Tools," navigate to that folder and click on System Restore.In the System Restore program, make sure "Restore my computer to an earlier time" is selected and click NEXT.Choose a date on the calendar that you want to restore your computer and click NEXT.The last page of the System Restore will pop up with your date that you have chosen and click NEXT. The system will reboot and the computer blue screen will be gone
Windows 7 Home Premium, 64-bit, OEM, never reinstalledHP model #p6654y, approx. 1 year old, no major problems until nowI've attached the BSOD Dump and System File Collection, but Windows refuses to produce a System Health Report because I have to run in safe mode. If you have an alternative method, I'll be glad to try it, but normal mode seems to be producing crashes more and more quickly.
I've had my computer for about a year and a half now and I still can't seem to solve why I keep having BSODs. I sent my computer back to the maker, Cyberpower, and they took a look at it, did some stuff (I don't know what), and sent it back to me. I thought it was fixed but then the BSODs came back and I just don't know what to do now. I've used a program called, Blue Screen View, to look and log the BSODs. I have put the BSODs in a .txt file with this forum.
I recently wiped my hard drive and installed windows 7 home edition but I've been having alot of issues recently, if my computer boots up at all. Sometimes it just loops the sound of the fans starting up for as long as 20 minutes. Sometimes it just has graphics errors on the boot up screens.
I try to troubleshoot my computers myself but I'm having a real time problem. I've had 2 bluescreens in 3 days, after two weeks of smooth running following building this new computer of mine. (specs in profile) First crash happened whilst moving files around on my hard disk, after disabling a mouse driver for my Razer Copperhead. The second happened on shut-down.
I gave it a full check with CHKDSK with all options enabled, 5-pass. It checked out clean. My RAID software shows that my array is in perfect health. There haven�t been any other instances of file corruption or read/write errors. All my games function fine. I've scanned my computer with Kaspersky KIS, Spybot S&D, Malwarebytes and Windows Defender, all clean.
The only things I've done recently were installing Malwarebytes and drivers for my Razer mouse, both which I've removed and tested before posting this. I was in the process of running some additional stress-tests like Prime95 when this all started happening, though every test on my memory, processor and video card have come up clean.
In my new place I have had slight issues with static discharge, though I generally touch my metal desk to discharge it. My equipment is separated by a sheet of tempered glass, yet somehow, twice my mouse has shut off when I discharged. I don't know if this is just from a touchy mouse or if somehow the discharges have gotten to the USB port and the guts inside. God I hope I haven�t destroyed my computer... (After multi-metering my ESD wrist-strap, I found out that there was no connection. I used that thing to build the computer, geez...)
