I already had 2 OS on my HDDs (win xp and win 7 32-bit) everything's fine on them. no BSOD been using win xp for more than 3-4 years now and win 7 32-bit for 1 year no major problems now i wanted to install win 7 64bit to take full advantage of my 4gb ram(i had since the purchase of my pc) but problem once it's booted it randomly BSOD (sometimes just 1min after boot, sometimes 20mins, sometimes 15mins) but it ultimately gets a BSOD..i have tried several installations of win 7 64bit (ultimate, premium, home) all same problem.. had some problems with installation for some versions (BSOD on install)how come nothing on 32bit but it's nightmare on 64bit.my latest install of 64bit windows 7 enterprise has less BSOD now (i have disabled lots of features of my cpu in my bios, maybe it's the reason) find attached my latest 2 dumps. [code]
I seem to be getting BSODs when running uTorrent. This has only started recently. Usually this is when i leave it on schedule mode, set to download overnight. Today I have tested and found that with schedule turned off and uTorrent running, BSODs still occur. I cannot be sure it is uTorrent, but it seems to only happen when it's open and downloading. I am currently running dskchk for bad sectors but as this is a second HDD supplied by the laptop maker. OEM Windows 7 Home Premium 64bit. I have updated uTorrent in the recent weeks/FONT]
I've just installed the full retail version of Windows 7 64bit and am having regular BSOD crashes and 'Recovered from a serious error' messages. Hardware is 1 year old (Intel DH67GD) i2500K, 12 GB RAM).
I recently bought some new ram *about a week ago* and since then I have been getting random BSOD's, but I'm not totally sure that its actually the ram as most of the time the PC runs just fine, mostly the BSOD's happen when I just turn on the PC from it being off *a cold start ?*.
System: PII 955BE @ 3.9GHz 12GB DDR3 Cas 8 1600MHz (1 set of 2 x 2GB and another set of 2 4GB all running at v1.5 8-8-8-24-2T and Auto in the Bios) Gigabyte HD4890OC ASRock 990FX Extreme
I'm going to run memtest later tonight and see what that brings up and I'm going to check my system drivers etc, I'd just like some input from the community on this issue . I'm hoping its not my motherboard .
Recently I have been trying to upgrade one of our computers (Dell Dimension 9150/XPS 400) to Windows 7. While this Dell model is old, a brief search on the internet shows that several people have gotten Windows 7 to work on this model just fine, so I'm inclined to believe this should be doable. I have performed multiple clean installs of Windows 7 Professional (64-bit) on this desktop, but inevitably I will eventually start getting a BSOD. When the computer restarts, I get the notification "Windows has recovered from an unexpected shutdown" with the following details:
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional information about the problem: BCCode: 24 BCP1: 00000000001904FB BCP2: FFFFF88002AFF318 BCP3: FFFFF88002AFEB70 BCP4: FFFFF800028EC185 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that describe the problem: C:WindowsMinidump-52112-24616-01.dmp C:UsersCherylAppDataLocalTempWER-40014-0.sysdata.xml Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt Here are download links to the files that "describe the problem": Minidump file & Sysdata file.
The BSOD is kind of a crap shoot; on some installs of Windows 7 it happens occasionally while on others it happens as soon as the desktop loads. The problem gets worse (or more likely to occur) the farther I progress in "setting up" the computer. Here is a general procedure I have been following:
1) Clean install of Windows 7 Professional (64 bit) on hardrive 2) Install all the Windows 7 Updates (the only drivers installed are those recommended via Windows Update as Dell offers none for this computer on Windows 7) 3) Install Microsoft Security Essentials 4) Install Microsoft Office Professional 2010 5) Install Microsoft Updates for Microsoft Office 6) Install other programs I need
One time I got all the way to step 6 and was ready to transfer backed up files to the desktop when I started getting a continual looping of the BSOD...with the most recent install, I only got to step 3 before the first BSOD occurred. I have tried running CHKDSK but that does not find anything nor seem to prevent any problems. I ran a memory test via advanced setup (where you press F8 while the OS boots) and that said something like "Problems were detected...you will need to contact your hardware provider" or something to that effect.
However, no specific information was revealed; perhaps a summary is supposed to come up once you reach your desktop but this was during an install where the BSOD was continually looping so I never could see the desktop for more than a few seconds. Reinstalling the original Windows XP OS doesn't seem to fix the problem; regardless of OS, drivers, or other programs installed, the BSOD inevitably shows up and does not seem tied to a specific update, program, or action.
I have just installed windows 7 64-bit Ultimate. I have Tested RAM (MemTest), HDD (windows), SSD(windows), GPU (Furmark)
BSOD: 1. Running only windows update, no drivers or any other software installed. 2. Running windows update and using browser (Google Chrome), AV (Microsoft Security Essentials) 3. Booted in Safe Mode with network connection.
Spec: Asus P8Z-77-V-Pro HDD 500GB Segate baracuda SSD 60GB Corsair Force 3 (windows is installed here) 8GB RAM Corsair vengeance Nvidia GTX560 ti TOP factory overclocked Intel i5 2400s 3,7Ghz
I've build a computer and want to install windows 7 x64 on it. But when I start the setup I allways get a bsod: Most of the time with this error: 0x00000124. I also had these: 0x0000007F, 0x0000009C, 0X0000007E, 0x0000000A
These are my specifications: Mobo: MSI P45 Diamond CPU: Intel core 2 Quad Q9650 3GHz RAM: Kingston HyperX (KHX1600C9D3K3/6GX), I've put in 2 X 2GB in slot 1 and 3 atm. HD: 1 Maxtor I, 1 Maxtor II (tried seperatly, no success) Graphics: Powercolor radeon HD 6850 PCS+ PSU: OCZ ModXstream Pro, 600W
The files are loaded from the DVD, then I see the windows logo. After that I usually get a BSOD. Right before I have to do the settings and create partitions. Very rarely I can get past it and start the installation, but then a blue screen comes up anyway. When I try in Safe mode, it loads drivers until driver.sys. Then it just stops.
Right now, I've put only one memory stick in (2GB) and I tested it with memtest86+, there were no errors. I also checked the hard drive for errors. I was able to successfully install windows 2000 professional. I also tried to install Windows XP, but that didn't work either. Could it be my graphics card? If so, what can I do about it. I don't have onboard graphics.
My W7 64 bit PC has BSOD'd twice in the last week. I am just learning this fascinating part of computers and am still very much in the dark, however I made sure that my OS was configured to create a dump file, and it was however there is nothing in the Minidump folder, as a matter of fact it doesnt exist. So much fro configuring the OS to create a dump file on a crash.I DL'd Bluescreenview and it showed nothing.The message at the bottom of the BSOD mentioned something about creating crash dump files but it seemed that nothing happened, there was no progress indicator, just a whole bunch of nothing. I left it for some time to see if the message or anything changed and it didnt. I restarted the PC and went hunting for the Minidump report, or any report for that matter.
Bought new laptop 4 month ago and this problem have been all the time.When I bought then it was freezing when I was surfing with Internet explorer and its just freezed (Is not working).But now is just freezing/shuting down.Few times have been blue death screen aswell.
My System Specifications
Operating System: Windows 2.6.1.7601 (Service Pack 1) CPU Type: Intel� Core� i7-2630QM CPU @ 2.00GHz CPU Speed: 2.02 GHz System Memory: 7.95 GB
I have been getting the blue screen of death on my win 7 Dell desktop for about 2 weeks. I managed to back up all of my files onto an external hard drive , but then today started getting the same BSOD when starting up my toshiba win 7 home premium 64 bit notebook.
Since the BSOD on my desktop , I am unable to connect to the internet as it no longer recognises the wifi card in the PCI slot. So I will continue with the information from my notebook.
Recently I upgraded from an old core2 duo to an i5-2500 quad 3.3GHz, 16gb Patriot ram, Asus motherboard. I noticed the first time I booted up something was wrong with the voltages for my PSU (Corsair 520w modular) which I had used previously. I didn't get the details of it time before Win7 started. After that I have noticed the fan died in my PSU, so I'm not sure if this is causing my BSODs. I am using an NIC and onboard Audio, and a Geforce 430 video card. The details of my bsod are below. This has been ongoing for weeks now and it's very annoying. I recently updated my Win7, restarted hoping that would fix it. Also I've scanned with AVG, SuperAntiSpyware, and Malware Bytes. I am out of ideas since I have a new install of Win7 64bit.
BSOD (occurs when playing games or just idle): Problem signature: Problem Event Name:BlueScreen
My Windows 7 Lenovo ThinkPad X201 X-64 system experienced 3 BSOD crashes today, after 6 months with no issues. All three bugcheck codes seem to be for different errors.I have attached SF Diag output, CPU-Z screenshots, and RAMMon screenshots.
My laptop is BSOD'ing at random times and seems to throw up different reasons. The most popular seems to be Memory Management & Driver IRQL Equal or Less errors. My laptop is an Acer Aspire 5750 Running windows 7 64bit.
I had 2 BSOD in recent weeks with the same error message on ntosknl.exe. I,m using Win 7 64bit. The dump file is attached. I,m using AMD X4 955 with 8G Ram, 1G HDD
I have another laptop and its a HP 2230s. I originally installed Windows 7 professional 64bit. But I have swapped the ram into my Lenovo ThinkPad. So the HP now has 2GB. I created a new partition and installed Vista Business 32bit on it. When I started the install windows .exe program in Windows 7, everything went well until it rebooted. When I rebooted, windows said something like:
Windows Boot manager:
The system cannot boot because of a recent change to files/hardware. (Something like that). Insert your windows disk.
So I just rebooted my laptop with the vista disk inside and installed. After, when everything was working, I wanted to go to the Windows 7 partition to un-install programs and copy some files over to the vista partition, the laptop just booted into vista.
I downloaded the easy BCD editior and visual BCD editor. (in the vista partition), I clicked the auto fix in visual BCD editor. It detected my windows installations. At the boot screen, I can select either Windows 7 or Vista. But when I select 7, the same error message appears.
Then I rebooted my laptop with a USB containing the Windows 7 (64bit) recovery tools. After, I don't have the message again. But when it goes to the starting windows animation, it stops halfway and it gets a BSOD. I tried debugging mode, it worked.
I found out that the larger partition, (Windows 7) is the C: drive. But when I boot into the smaller partition, (Windows Vista), the drive is also C:!. So I don't know what I could do.
I insert the windows 7 disk and repaired my installation, it just boots into windows 7. But when I insert the Vista disk and repaired my installation, it just boots into Vista!
I've followed your steps and have created a partition of 50GB for installing XP Pro 64bit.
However, when I boot from my Windows C.D, it loads up the Windows files but then I get a blue screen error....
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try chaging video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
I've got this new laptop last month and after two weeks got my first BSOD. I've done chkdsk, sfc, and last know good config only to have it back again every 3 days or so. I don't have restore point far back enough and don't think I've installed anything that could cause this. The driv'ers are up-to-date, and I don't have Norton or AVG just Kaspersky Internet Security as my antivirus. But I do play LOTRO but at the lowest graphics quality. I don't have any CDs and the laptop didn't come with a Windows disk so I can't repair or reinstall it to its factory settings. Sometimes the BSOD appears when I starting shutting down, otherwise its random.
Windows Mobile Device Center doesn't work with Outlook 2010 if installed as 64 bit. Microsoft says to "fix" this by uninstalling Office 2010 and installing the 32 bit version!My question is are there any 3rd-party sync programs that will work with Windows 7 64 bit and Microsoft Office Outlook 64 bit and Windows Mobile 6.5 devices? I don't need to sync email but I do need to sync calendar, contacts, and tasks. And yes, I am aware that the iphone will sync with it! Silly Microsoft. I have 1.5 years left on my mobile contract with my Windows Mobile 6.5 phone?
I have Windows 7 Ultimate 64-bit, and never had any problem installing 64-bit programs. Now, when a try to install any 64-bit programs it shows a message of incompatible version of the program with the running Windows, but my Windows 7 is 64 bits.
My computer got the BootMGR is missing problem, which I have had in the past which is not that big. I insert the Windows 7 64 Ultimate disk it starts up everything fine, press repair my computer and it finds the installation. But when I press on it and next it has an error pop up saying "This version of system recovery options is not conpattble with the version of windows you are trying to repair. Try using a recovery disc that i compatible with this version of Windows." If I dont select anything but press next it allows me to look at the screen Im supposed to, but if I go to command prompt or click autmatically repair nothing will be saved or changed. This is the same disc I installed Windows with and repaired it several times. But I did have to reset BIOS earlier so this may have affected something.
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
I am writing this right now because after the last BSOD it said "Windows can not start" and I had to restore to when it was previously working. So up until that point this is what I did.Since working with computers almost my entire life I know most BSOD are due to either bad memory, drivers, or bios. I started there and updated my nvidea drivers but it happened again. I moved to the motherboard bios.I did find a newer one on there and using ASUS tool I flashed the BIOS. Same thing still happened. Next I ran memtestx86 for 8 hours and it returned no errors.At this point I just decided to look for newest drivers for everything. One thing that happened consistently was that my wireless USB adapter from Cisco had to be unplugged and plugged back in for it to work. I went there first, reinstalled the drivers but still the same thing. I thought maybe it was my hard drive. I downloaded Seagates Utility tool and ran all the tests and they all passed fine. I ran defrag just for good measure along with windows version of the mem test and that passed as well. I still continued to get the BSOD and I have to tell you I'm irritated and also stumped.
Next I moved onto software. I have been using AVG free for years but I know virus programs do some crazy stuff and I got rid of that. Turned on windows defender. I decided that since the wireless adapter didn't work after these crashes maybe lets just go to a direct wired connection. I disconnected the cisco wireless adapter and I'm just using a direct connect right to my router.These come at random times.. nothing I do can trigger it. It can stay on for days and not crash and then there are times it can be up for 10 min and crash.Some of you might notice that in the CPU-Z screenshots I had to take the screenshot with the error underneath. Every time I chose either of the two slots it crashed the program.I have not done anything internally besides add some neon to my computer which does not connect to the board at all.I have seen IRQL blue screen once so I even went as far to go into the power settings for windows and make sure the usb and everything never went into any kind of "standby" mode.
I believe this is still under warranty and I would like to go in with good information if I need to challenge and get new hardware if that's what it is.On a side note I have not touched the memory physically. I know some suggestions were to reseed the memory and chip but In my opinion something that has been working for months that never moves off my desk and is never basically touched besides the power button shouldn't mean something just came loose after 4 months of owning it.Again that's just my opinion. I have removed AVG, Ad-Aware, Some webcam motion detector software (which was a joke) and the only thing that was really installed was Skyrim.
1 x Case CoolerMaster HAF 932 Full Tower Gaming Case - Black 1 x Case Lighting Liquid Neon Thunder Pattern Light - Red 0 x iBUYPOWER Labs - Noise Reduction None 0 x iBUYPOWER Labs - Internal Expansion None 1 x Processor Intel� Core� i7-2600K Processor (4x 3.40GHz/8MB L3 Cache) 0 x iBUYPOWER PowerDrive None 1 x Processor Cooling Asetek 550LC Liquid CPU Cooling System (Intel) - ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow) 1 x Memory 8 GB [4 GB X2] DDR3-1600 Memory Module - Corsair or Major Brand 1 x Video Card NVIDIA GeForce GTX 580 - 1.5GB - Single Card 1 x Video Card Brand === High Performance === EVGA Brand Video Card Powered by NVIDIA 1 x Free Stuff [Free Game Voucher] - Dungeon Siege 3 - Free with Purchase of NVIDIA GeForce GTX 550 or above 1 x Free Stuff [Free Game Download] - Just Cause 2 - Free with Purchase of NVIDIA Video Card 1 x Motherboard [SLI] ASUS P8Z68-V -- 3x PCI-E 2.0 x16, On-Board Bluetooth, Lucid Virtu Technology 0 x Intel Smart Response Technology None 1 x Power Supply 1000 Watt -- CoolerMaster RSA00-AMBAJ3-US 1 x Primary Hard Drive 1 TB HARD DRIVE -- 32M Cache, 7200 RPM, 6.0Gb/s - Single Drive 0 x Data Hard Drive None 1 x Optical Drive [12X Blu-Ray] LG BLU-RAY Reader, DVD�R/�RW Burner Combo Drive - Black 0 x 2nd Optical Drive None 0 x Flash Media Reader / Writer None 1 x Meter Display NZXT Sentry LX Aluminum Fan Control, Clock, and Temperature Display 0 x USB Expansion None 1 x Sound Card 3D Premium Surround Sound Onboard 1 x Network Card Onboard LAN Network (Gb or 10/100) 1 x Operating System Microsoft Windows 7 Home Premium + Office Starter 2010 (Includes basic versions of Word and Excel) - 64-Bit 1 x Keyboard Thermaltake eSPORTS CHALLENGER PRO Gaming Keyboard 1 x Mouse Thermaltake eSPORTS BLACK Professional Gaming Mouse 1 x Monitor 27" LCD 1920x1080 -- Sceptre X270W-1080P 0 x 2nd Monitor None 0 x Speaker System None 1 x Headset Thermaltake SHOCK Spin Gaming Headset - w/ Ergonomic Shaped Velvet Ear Cushions, Neodymium Magnet Speakers, In-Line Volume Controller & Independent Microphone Box 1 x Video Camera Connectland 1.3MP USB Interface WebCam 1 x Advanced Build Options iBUYPOWER Specialized Advanced Packaging System - Protect your investment during transportation! 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Achieve exceptional airflow in your chassis 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Basic Pro Wiring 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Power Package (Individually Sleeved 24-pin ATX, 8-pin CPU, and SATA Drive Power Cabling) 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Video Package (Individually Sleeved 8-pin and 6-pin PCI-E VGA Power Cabling) 0 x Case Engraving Service None 1 x Warranty Standard Warranty Service - Standard 3-Year Limited Warranty + Lifetime Technical Support 1 x Rush Service Rush Service Fee (not shipping fee) - No Rush Service, Estimate Ship Out in 5~10 Business Days
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
I started getting BSOD two weeks ago. As far as I can remember the first time I had a BSOD was on the day I installed Max Payne 3 (I read somewhere that the some guy had also this problem when he installed max payne). There were two occasions that I got a BSOD upon starting Max Payne 3. But lately I'm getting BSOD when doing low-load stuffs like browsing with no other apps opened. I've already done memtest with 10 passes with no errors. I'm 24 hours prime95 stable. I just don't get it! I've manually set my timings for my ram. I'm not doing any overclock. Everything is on stock settings.
I am brand new to this site so forgive me if I miss a step. I was wondering if someone who is good at debugging dump files could give me a second set of eyes on these 2 I will attach. One BSOD is DRIVER_POWER_STATE_FAILURE (ntoskrnl.exe) and the other is UNEXEPECTED_KERNAL_MODE_TRAP (ntoskrnl.exe).I have this problem across 15 identical laptops with fresh installs of Win 7 Pro 64Now my guess is this will boil down to a BIOS upgrade, but if there are driver conflicts within these dump files
I am the developer of a driver for a network adapter device that does scatter-gather DMA. Driver is not newly developed, but has had some recent changes.My client has a puzzling BSOD on one x64 machine after about 18 hours of successful operation. My x64 Win 7 machine runs fine forever. Client's box crashes in seemingly random places that indicate mem corruption.Mem test on machine was clean. Minidump is attached. WinDbg stack doesn't trace back to my code - it just shows the calls to handle the exception. Any clues y'all can see?System info from WinDbg:Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product:WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506One difference between client's x64 and mine: Theirs has a valid DMA MapRegisterBase pointer from a AllocateAdapterChannel call, where mine (and my x86 systems) always have a null DMA MapRegisterBase
