Every time that I shutdown Windows 7, it tries to instal 3 updates related to DotNet 4.0, and finishes in a BSOD. I dont have the minidumps cause when it starts again it's like nothing had happened, it doesnt show me any "Unexpected shutdown" window.
View 5 RepliesI thought it was my video card but then i swapped it out and it is still doing it. it used to be random but now it seems to do it randomly and when installing new programs and also at 10% install on the new wow exp beta it is at 10% on the dot every time.
View 1 Replies View Relatedi have a wierd problem, some months before i used to have a software named sandboxie.Then suddenly some time i started experiencing BSOD errors about a message i dont remember but it was like "wrong write adress in memory".I unninstaled sandboxie and it stopped.Then 5 weeks ago i installed another sandboxie-like software named buffer zone pro and after install same thing happens random BSOD with same message.Also my pc has been formated in the meantime from sandboxie and bufferzone for other reasons but the problem still remains.
View 1 Replies View RelatedI don't know why but,everytime i logging off,the windows always start update and some of my file in my computer got corrupt here are the example: i previously installed an Alienware theme and patched my computer,so the theme can work fine: im using Windows 7 Home Premium 32-bit
View 1 Replies View RelatedEvery time I shut down my laptop, there would always be the notice "installing update 1 of 1". This has been happening for a while and I'm wondering what's going on.
In addition, many random files have been created in the Local C drive as shown: Corrupted Image removed - please re- upload
I don't know if I should just delete them but anyway, I chose not to just in case.
I Can't seem to figure out what went wrong. I think it needs a Device driver update of some sort. I am running Windows 7 64 bit off of an original MS DVD that was installed only about a month ago. I built this system a little over a year ago. I have since pulled some memory sticks (sent for RMA) as they gave me random BSOD because of memory errors. When I try to install updates it gives me a BSOD. I have tried to do a system restore but it says it is unable to complete. Any Ideas? See attachment for dump files.
View 8 Replies View Relatedmy computer Blue Screens about once every 24 hours or so, so it's not that bad yet, but it often happens when I'm not doing anything at the computer. It was only three times so far, but I figure that's more than enough to get help with it, so it doesn't keep happening.
View 4 Replies View RelatedI'm getting the BSOD almost everytime I boot my pc.
View 3 Replies View Relatedit crashes suddenly and many times and it has given me this problems since i bought it,so i decided to post here to look up for the solution.
My computer's OS is windows 7 x64,it has 8 GB of ram and an Intel I5 Quad core processor 3.20 GHz.
I tried fixing the problem by updating drivers,searching for viruses,setting my pc to low power consumption,improving the heat dissipation with many fans and a new case and cleaning inside it,running chkdsk,uninstalling some useless programs and doing RAM tests but nothing of this worked.
I've been getting BSOD everytime I run a game which is graphic intense(like skyrim).I am using Alienware M17x with dual SLI with dual NVIDIA GTX 280m. I used to have a broken adaptor so I've been using a lower voltage adaptor that did not charge the laptop and used the Geforce 9800. This problem has been occuring ever since I got my new adaptor and has been using the 280m.
View 1 Replies View Relatedlately i have been getting quite a number of BSODs, even though there were no hardware changes.
error code : 0x00000050
according to the bluescreenviewer, it was caused by ntoskrnl.exe & ntfs.sys took out my rams, cleaned the 'golden' area. makes no difference
I have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
Windows Updates continues to re-install five specific updates which are:*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121) -Download size: 38.5 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368) -Download size: 1.8 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405) -Download size: 11.7 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827) -Download size: 4.3 MB.*Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) -Download size: 32.2 MB.- I purchased my computer 4 to 5 months ago. It is a Windows 7 Home Premium Hewlett-packard HP Pavilion dv6 Notebook PC (64-bit Operating System).
View 3 Replies View Relatedkeep getting this admin prompt to enter username and password when i installsomething. the machine is part of a network. and i am logged in as a user. how do i change settings so a user never gets the prompt
View 1 Replies View RelatedHaven't used this computer for several months now. It's a bit sticky to start but it works. Problem occurred when opened a new web-page on the browser just after a Windows update of computer.
System stats:
Operating System MS Windows 7 Ultimate 64-bit SP1
CPU Intel Core 2 Quad Q6600 @ 2.40GHz45C
Kentsfield 65nm Technology
RAM 4.00 GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard ASUSTeK Computer INC. StrikerExtreme (Socket 775)40C
Graphics SyncMaster (1680x1050@60Hz)
ATI Radeon HD 5450 (ASUStek Computer Inc)55C
Hard Drives 147GB Western Digital WDC WD15 00HLFS-01G6U SCSI Disk Device (ATA)
Optical Drives PIONEER DVD-RW DVR-112D ATA Device
Audio High Definition Audio Device
BSOD with windows updates on new MSI barebone kit?
View 2 Replies View RelatedI have managed to achieve the BSOD quite a lot, and have tried re-installing Windows 7 x64 on my computer three times today.
I have received the BSOD:
after trying to reformat my F: drive.
Uninstalling my Nividia drivers for a new one
After using Firefox for a while it just won't open and BSOD follows shortly after
I believe after installing Windows Live applications it startes to give me BSOD
After the first BSOD I start to get the error message:
Check filesums or somehting about the computed sums is not correct.
I am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
View 3 Replies View RelatedI installed 285.62 P08 Nvidia Driver from the Dell webpage two days ago and it was fine and everything was good after the restart from the installation. After finishing up my session, I noticed that there is a window update so I shut down and left the computer to do the updating on it's own. Today, I switched on my computer to look at my timetable for today and after that put it to sleep mode.
After "waking" it up, I was met with a BSOD after like 5 minutes of use. I then decided to system restore to before i did the updates. It still BSOD albeit it took a longer time before that happened. Right now im using Safe mode + Networking to type this message out. (The computer does not seem to BSOD in safe mode so far). I did the steps listed but I could not get the perfmon step working. "An error occurred while attempting to generate the report".
Specs:
Windows 7 64bit
OEM
About 7 months old both hardware and the OS
I triggered a BSOD in normal mode:
KERNEL_DATA_INPAGE_ERROR
STOP: 0x0000007A (0x0000000000000020, 0xFFFFFFFFC000009D, 0xFFFFFA800798E078, 0x0000000000000000)
Physical Memory Dump FAILED with status 0xC000009C
I am getting BSOD everytime I boot up the computer. It will say configuring windows then crash to BSOD and say dumping physical memory. Code error is 0x000000d1. It says that Ndis.sys is involved. Top of the BSOD it says Driver_IRQL_NOT_LESS_OR_EQUAL or something. it just continues this cycle of trying to boot up followed by crashing.
I can boot up in safe mode, but not safe mode with networking. So I'm not sure how to download the latest drivers without an internet connection.
I am running Windows 7 service pack 1 on a Dell inspiron 546. I have tried booting in safe mode and running msconfig to only boot up microsoft programs, and i've disabled Mcafee security and firewall.
last night before I shut my pc down I was fiddling with windows updates. all I did was make sure that it was set to not install anything automatically and ask me before it does anything. Then oddly enough when I shut down it said it was installing windows updates yet I did not see any updates ready to install before I shut down so I was very confused. I let it do its thing and then it finally shut down. Now when I start the pc today I get a blue screen of death that says pagefault_in_non_paged_area when Windows was finalizing the update install..it rebooted again, tried once more to finalize updates and got another bsod. I rebooted into safe mode at next reboot and it said it was uninstalling the updates because windows failed to load. It restarted normally and it said it was uninstalling and then bsod again. This time when I started up the system repair option came on. I let it do its thing but the issue couldnt be auto fixed it said. I clicked the details and there was signature 07 saying BadDriver. The details are sketchy from here because im having a hard time remembering them, but it let me go into system recovery so i chose to roll back to the time where it showed there was a windows update installed at like 1AM(there was not however, i have no clue why it said this). It wasnt able to roll back to that point and let me choose another. I instead chose to run the memory diagnostics. Windows rebooted and stuck on my bios splash screen. i restarted and it stuck once again.
View 7 Replies View RelatedFor the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
I have updates waiting to install. When I choose to install I get the "preparing to install" screen, but nothing happens after that.
View 5 Replies View RelatedJust got this new Acer aspire, windows 7 laptop and keep getting same error message when trying to install updates:' Windows update encountered an unknown error. 2 updates failed and were not installed - error codes 643 and 74F'.
[code]....
I've tried installing certain ones, even some ones at a time, but the results are the same. Download complete. Please restart. But the update never happens and I don't get an error message.
View 12 Replies View RelatedWindows 7 updates have not been installing recently - All the latest set of updates that have been offered attempt to install and then they stop - I attempted to install one at a time but this is no help either
View 14 Replies View RelatedWhere to start? Several weeks ago I installed a windows update & then my Bullguard firewall wouldn't start. I got remote assistance from Bullguard & they succesfully restarted my firewall.Since then I have permissions issues, I have tried changing my status from admin to standard but the standard option is greyed out. I have tried setting a new user account but that also will not let me apply any changes without a password which I don't have. Also when I go to All Programs this is empty?My other problem is my windows security updates faill to install ( error 8000ffff) I have looked at different solutions online & used microsoft fix it but all to no avail. I have 19 updates to install but they constantly come back with the same error.
View 1 Replies View RelatedI'm running Windows 7 64-bit and there are some updates I can't install. It loads to 15% then it says "failure configuring updates, reverting to old setup", or something similar. First I had 8 updates when this started happening but I managed to install the security updates by selecting them exclusively. I have have tried deleting my updates folder and download again but same thing happens. Is there a fix for this? It's annoying when my computer reboots because they can't be installed.These are the updates in question:
View 3 Replies View Relatedi just installed windows 7 on my computer, but when it starts downloading the service pack and other updates it doesn't download them at all
View 7 Replies View RelatedBasically my issue is when I install a Windows update, it installs then I go to shut down the PC and it installs before shutting off. I then go to pack on my PC and the update is back again, I have repeated this several times and It is still there.The update is:Security Update for Microsoft XML Core Services 4.0 Service Pack 2 for x64-bases systems (KB954430)
View 3 Replies View RelatedI have been trying to install some windows updates on a fresh install of Windows 7 Ultimate 64-bit. Every time I try to update I receive two error codes. One is 8024200D and the other is 80092004. I have tried everything I can think of aside from wiping and re-installing windows to get rid of these error codes to install the updates
View 15 Replies View Related