Basically it just gives a BSOD every time i unplug the usb.
I have the latest beta drivers downloaded from windows update.
I have a wired control and the xplorer guitar (gh2), both works perfectly, the only trouble is when i unplug.
The BSOD indicates something like irql less or equal 0x000000a
BTW i cant upgrade the driver because it gives the BSOD when disabling it to do the upgrade.
Windows 7 x64 pro? the original installed OS on the system? OEM = came pre-installed on system, What is the age of system (hardware)? 2.5 yrs What is the age of OS installation 2.5 yrs (have you re-installed the OS?-NO)
View 1 Replies View RelatedAs i just recovered from a bunch of BSOD's caused by cheap Chinese RAM, i now just got a stop error while unplugging a cheap Chinese capture card.This is not the first time this happened. Here's the most recent BSOD. EasyCAP is JUNK!.zipI really hope this is nothing critical. I'm still licking my wounds from my last Stop Error Misfortune Set.
View 1 Replies View RelatedI've used a wireless 360 controller with receiver now flawlessly for ~1 year. Bought a Wired one today, except whenever I plug it in, I get an immediate BSOD! I've taken the usual precautions of uninstalling MotionInJoy (both from control panel AND by deleting the appropriate driver from c:windowssystem32drivers), but it still blows up every time I've gone to the Microsoft site and downloaded the drivers there too. Basically, I install the Accessories part, and that's fine. Then when I plug the controller in, it takes about 3 seconds and then BAM. BSOD. Upon restarting, if I plug it in, it doesn't BSOD, but it sure doesn't work either. Oddly enough, the MotionInJoy driver reappears in the system32/drivers folder occasionally after a BSOD.
View 6 Replies View RelatedMainboard Gigabyte GA-880GA-UD3H
Windows: Windows Ultimate X64 (not even 2 weeks old)
CPU AMD Phenom II X6 1090T
Ram 16GB
VGA ATI Radeon HD 5700 hooked up through HDMI to my TV
For some reason keep getting blue screens most of the time it is while I am playing games doesn't matter what game it just does it randomly sometimes I can play for 1 hour or 4 hours or sometimes not even 30 mins. I've updated my video card to the latest version. I've also updated my Direct X. Files are in the attachments. I have a lot of PC games and Also I use a Xbox 360 controller for most games.
Is there any way to use 2 XBOX 360 Controllers for Windows and 2 XBOX 360 Wired headsets at the same time in a game on the same PC? I have tried and both headsets are working properly independently but was just hoping to get them both outputting sound primarily with both microphones recording as the secondary priority.
View 7 Replies View RelatedI want to buy an xbox wired controller to play games on pc with the controller. My question is that the controller works as the same like on xbox? Actually, I mean the analog sticks. It has the same sensitivity on pc like on xbox? Because in the keyboard you can push the button or not. With the analog sticks you have more possibility, sensitivity.
View 10 Replies View RelatedI've had Win7 for a few months now (thanks to MSDN Academic Alliance) but I've just recently started having this problem. I'm running Win7 Professional on my HP HDX16 laptop. My laptop basically runs flawless when plugged into AC power. When I unplug it, however, CPU usage skyrockets to 95%-100%. I managed to look at the task manager one time at noticed that it isn't necessarily one process that is crippling my computer; It's more like 4 or 5 programs that run around 20 CPU and the rest of the processor is used by various other programs. The process hogging programs vary sometimes, but it usually includes audiodg (audio device graph), mcshield (Mcafee), and a few other svchost (usually Win Defender, Win Firewall and AudioEndpointBuilder). I have the IDT HD audio card for those wondering (and all of the latest drivers from HP).
View 29 Replies View RelatedOk so before this lag i used windows vista (worked fine) and now i use windows 7 and when i unplug and plug in my computer i get really bad lag and sometimes it disconnects me from my wireless network and reconnects me. Now this happens about 80% of the time and its mostly when im running a game.
Computer Specs:
Computer Name: Compaq Presario CQ50-142US
Mother Board: Winstron Model: 360B
Cpu: Intell(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
Ram: 3072 MBs
Graphics Card: Mobile Intel(R) Express Chipset Family
If you need any more info just leave a response saying so and ill post what i can.
I have downloaded the Windows 7 RC1 ISO and "burnt" it onto a 16GB OCZ Throttle eSATA / USB drive (exactly as in the SevenForums tutorial). I can boot from this drive and install Windows with no problem.
But... I believe the 200MB system partition is somehow being placed on the flash drive, because once I disconnect it and attempt to boot, I get the standard "DISK BOOT FAILURE..." message.
I've followed the suggestions on the "How to avoid 200MB hidden system partition" page (i.e., pre-create the desired partitions on the installation drive rather than installing to unallocated space), but I'm still getting the problem.
The "Windows might create additional partitions..." dialog box popped up once, on my first installation attempt - and I did foolishly click "OK" to it. It hasn't appeared since for me to click "Cancel" to, however much I try deleting and remaking partitions
Has anything changed in RC1 regarding the system partition? Is it more persistent in creating it than it was with the Beta?
I use my computer mainly for living room entertainment and I use my HDTV (LG LED 1080p) as my main computer screen. Everything used to work fine but I've recently started having problems with the sound. When I turn the computer on, the sound works perfectly. However, if I close the TV or change the input from my computer to anything else, and then go back to the computer, the sound is gone.I looked through the sound options in the Control panel and noticed that the sound problem comes from my TV speakers (identified as AMD HDMI output) being unplugged. This is obviously impossible because the speakers are in the TV so this must be a Windows problem. This output works perfectly when the sound is on.My TV is connected to my computer through a single HDMI cable for sound and image (ATI Radeon 5700 graphics card and ASUS M4A79XTD EVO motherboard on-board soundcard, both with latest drivers). I use Windows 7 premium home edition 64-bit and I have 4 GB of RAM. i found that either logging off from Windows or restarting the computer will bring the sound back on. Unfortunately, as soon as I turn off the TV or change the input, the sound goes off again.
View 1 Replies View Relatedi have unplugged my hard drive from my pc and plugged back in then this message comes up "reboot or select proper boot device or insert boot media in boot device and press a key"
i tryed with CD it doesnt work
I tried to install window 7 to new Extreme SSD couple times but I always got the same message:Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and restart your computer. If you continue to receive this error message, contact the hardware manufacture.Status: 0xc00000e9..Info: An unexpected I/O error has occurred.
View 1 Replies View RelatedI put my Windows 7 laptop to hibernate when it is plugged to the power source. When I unplugged the laptop from the power source, the laptop powers off. The next time I turn on the laptop, it is restarted and I see the screen with a message that says Windows was not properly shut down.
View 3 Replies View RelatedSo pc is working fine I unplug ethernet cable into laptop to access internet on it,works fine, put ethernet back into computer and now there is no access to the internet. The internet still works as I checked it by plugging it back into laptopThe pc is working all software etc. but there is no internet accesswhen internet works on laptop it says public network but on pc network is unidentified and i can't change it. I tried making a new connection but it asks for username and password and I've never done anything like that. Should i type one in and that creates the password etc. or would i need to have one to create it. I don't really know what the network thing is all about I'm a newb on that part.eI tried network trouble shooter and that didn't help either.
View 5 Replies View RelatedDual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn�t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management.
If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys. Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
I was wondering if anyone is familiar with a method to enable sounds for when you plug in or remove a charger connected to your laptop. It is not a problem with my pc, but is an option that is not available for me which i would like to install to let me know if i accidentally unplugged the charger, particularly if I'm working on a full-screen feature. I have Windows 7 home Premium 32-bit installed.
View 2 Replies View Relatedso basically can i like reformat it to be used as a HD on my pc because i got a new Xbox 360 that doesn't use the old HD anymore?
View 1 Replies View RelatedIs there a way to get Old Xbox controllers (the better ones imho) to work with windows 7 ? Windows 7 does not seem to be smart enough to understand the XP driver. It will not pick up my controller, even after the drivers appear to install.
View 9 Replies View RelatedI have been pouring over countless threads on issues related to this. Yet none of these solutions seem to be working for me, and I am fairly certain that I am implementing them correctly.Xbox and PC do recognize each other and I can access the libraries on my computer via xbox.I have setup the Windows Media Center on my Xbox.WMC on my computer shows the Xbox is setup as an Extender. It also states that it is ready for use. Every time I try to run WMC on my Xbox it enters the black screen that says Windows Media Center and has the load "bubbles" underneath with the word Contacting... after a period the screen times out and gives me the message:"Connection Failure.The Xbox could not connect to the Windows Media Player PC. Turn the console off and and back on again, and try again."
View 1 Replies View RelatedI've got a TV Tuner in my PC, is it possible to stream it via Windows Media Center straight to my Xbox? If so, is it possible to record things straight to my Xbox?
View 1 Replies View RelatedI have windows 7 home professional 32bit and an xbox 360, and I just cannot get media center to work. I have moved from wireless to wired, disabled windows firewall, tried just using a switch instead of my BT Home Hub 3.0
It gets as far as the xbox displaying 'connecting to media center' but the PC comes up with an error was encountered.
The event viewer error message is :
Media Center Extender Setup cannot create an account for the Extender with ID: uuid:10000000-0000-0000-0200-0025AEEBD738.
Error: Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
The event ID is 545
Source : Media Center Extender.
I've been at it all morning, so I'm popping out for a bit to calm down But will start again later. Are there any connectivity issues with the Home Hub 3.0 ? UPnP is enabled.
I've had windows 7 for about two weeks now, and when i first installed it every thing was fine, WMC was working the way it was suppost to with my 360. But one day it just stop working when ever i try to connect it says "contacting" then after waiting minute's for it to start it says "Connection failure".i don't know what could have stopped it from working but its driving me crazy trying to find out what the problem is. i tryeduninstalling my xbox extender from WMC, and setting it up, again with a new Setup Key.(i did this many many times now.)Disconnecting my router and connecting my 360 directly to my laptop (wired)
View 6 Replies View RelatedBasically I have an acer aspire z5761 all in one pc and I installed the hdmi pci card. After it was installed I plugged in my hdmi cable from my xbox to my pc, my only problem is, how do I display the xbox on my screen? When I turn on my computer it runs normally as if it would, is there a button or something for me to switch mode?
View 1 Replies View RelatedMy computer info:
Toshiba protege m750 S7212
Windows 7 Ultimate
Service Pack 1
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHZ 2.40 GHz
Ram: 4.00 GB (2.87 usable)
32-bit
I can not get my Windows Media Center to connect to my xbox as an extender. I decided to attempt to use another computer to connect and as soon as WMC opened up it ask if I wanted to connect my xbox 360 as extender, which worked. That computer was a new Dell laptop. I haven't been able to set my Xbox 360 up as an extender to my Toshiba, with both the new sleek black one with the built in wifi, or the older 360 I had. This tells me 1: It is not my Xbox. 2: It is probably not my router settings. 3. Its a computer specific problem. When I search for my xbox as an extender on the Toshiba it Can't get past "configuring device". But I can see the xbox from Toshiba under the network window in explorer as a media device. My WMC runs fine. I haven't actually tried to use for anything other than adding my xbox as an extender but it does not crash. My xbox is not now or previously set up with another device before my Dell computer attempt.
Things I've tried: Every setting possible for two different routers I've owned that both boast media center compatibility (which is true for the Dell). All the port forwarding and opening and even putting my xbox into the DMZ. DO NOT TELL ME TO GO TO A SITE ABOUT ROUTER SETTINGS.
Uninstalling WMC by turning it off and on as a windows feature via the programs and features menu. Turning my firewall completely off to update and connect to Xbox Direct connecting both computer and xbox to router. Updating all my drivers. "Download now" option under WMC general settings to try and the most recent update.
command prompt: sfc /scannow. Everything came back verified. Create another user account with admin rights.
Both the Dell and my Toshiba are the most recent version of WMC: 6.1.7601.17541 (win7sp1_rtm.101119-1850). The only feature the Dell has that I don't is "Cyberlink Power DVD" which might be a Delly only feature. Both computers have the same setting on the router as well. My computer wasn't able to use the last cisco one to add the xbox and now we have a d-link DIR-685. With updated firmware. All my drivers are updated except for the PCI Simple Communications Controller which I tried an automatic and manual update through the intel set. And the AYGOK82A IDE Controller driver which didnt even show up after a web search.
which is why i made myself an account to post on this forum.The problem is when i'm plugging my xbox 360 controller on my computer , the lights are flashing and i can't use it.I have downloaded the good drivers on microsoft website. (My controller is wired by the way.)I have downloaded the driver multiple times , uninstalled it , restarted my computer etc.I have tried everything that was on the internet , at this point i don't know what to do anymore and i'm frustrated.In fact , the controller works fine and the driver too , but when i move the controller or take it in my hands , the lights start flashing and it looks like the driver ''disconnect''. have made a video of it where you can see me taking the controller in my hands and the lights flashing , you also hear a noise of ''new material detected'' when it flash because the driver stop working for a second or two.Also , if i move too much with the controller , i get a blue screen of death.All my drivers are up to date , i'm using a program called DriverUpdate and i have the full version of it.
View 4 Replies View RelatedI purchased the above for an upcoming game. I purchased 1, thinking that's All I needed, however, I should of ordered 2. When I order the second, will it
View 5 Replies View RelatedBlu-Ray drive for the Xbox 360? Nope.
This week, rumors popped up again that Microsoft was working on a $100-$150 Blu-Ray add-on drive for the Xbox 360. And once again, the rumors are untrue.
Here's the official statement.
"As we've said before, Microsoft has no plans to introduce an Xbox 360 Blu-ray add-on. Games are what drive consumers to purchase game consoles, and we remain focused on providing the largest library of blockbuster games available." Read more at the source.
Tried xpadder, switchblade, both running as admin and with various compatibility modes with no success.
Anyone else had any luck with this?
i was trying to find out on the net how to format my old xbox 360 hdd for pc since i can't use it anyways because i got the new xbox that doesn't use those anymore so i stumbled across a thread showing how to do it and i thought i would explain how to do this so you can use it as a normal external HDD.first what you need is a xbox hdd and a xbox 360 hard drive transfer cable
1.download a tool called Hard Disk Low Level Format Tool link: [URL]
2.once you install that start the hard disk low level format tool and select your xbox 360 HDD?
3.click the tab called low-level format?
4.Then click "format this device" and wait a while for it to finish formatting the xbox hdd?
5.When its finished formatting go to your windows start menu right click on computer and choose manage?
6.click on the tab called disk management and there should be your xbox hdd but un-formated so your going to have to make it NTFS format and right click on it and make a new simple volume. If it does not allow you to make a new simple volume then right click were it says disk on the side like for example disk1 depending how many HDD's your pc has and choose convert to GPT disk,mines already formatted should look similar just without the NTFS and custom named hdd?
7.once that is done it should make your xbox HDD usable on your pc like any normal pc HDD ?
How do you connect xbox 360 as a extender? I would also want to know what model of xbox 360 would work?
View 2 Replies View Related