I've had Win7 for a few months now (thanks to MSDN Academic Alliance) but I've just recently started having this problem. I'm running Win7 Professional on my HP HDX16 laptop. My laptop basically runs flawless when plugged into AC power. When I unplug it, however, CPU usage skyrockets to 95%-100%. I managed to look at the task manager one time at noticed that it isn't necessarily one process that is crippling my computer; It's more like 4 or 5 programs that run around 20 CPU and the rest of the processor is used by various other programs. The process hogging programs vary sometimes, but it usually includes audiodg (audio device graph), mcshield (Mcafee), and a few other svchost (usually Win Defender, Win Firewall and AudioEndpointBuilder). I have the IDT HD audio card for those wondering (and all of the latest drivers from HP).
I put my Windows 7 laptop to hibernate when it is plugged to the power source. When I unplugged the laptop from the power source, the laptop powers off. The next time I turn on the laptop, it is restarted and I see the screen with a message that says Windows was not properly shut down.
I have a system I am working on that no matter what I do svchost.exe keeps CPU usage on a Quad core hovering around 70-80% and temps in excess of 120F with a ThermalTake BlueOrd cooler installed. It is a custom system I built, with the following specs:
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Professional , 64 bit Processor: AMD Phenom(tm) 9850 Quad-Core Processor, AMD64 Family 16 Model 2 Stepping 3 Processor Count: 4 RAM: 1791 Mb Graphics Card: ATI Radeon HD 4200, 256 Mb Hard Drives: C: Total - 305142 MB, Free - 265597 MB; Motherboard: ASUSTeK Computer INC., M4A785-M, Rev X.0x, 105424870002755 Antivirus: Microsoft Security Essentials, Updated and Enabled
Usage spikes when Outlook, IE8 and SKype are running after a random time period. I had this system on my bench for 2 weeks straight running benchmark tests and stress test software which all came back "PASS." I scanned for malware, virus, rootkits, etc. to no avail (all clean). Because of the extraordinarily high usage, USB drives are not working properly (take more than 2 hours to come up) and the system is sluggish. This should not be happening on a QuadCore system with a high-performance cooler. I even went so far as to format the HDD and perform a fresh install of everything. It worked perfectly for about 30-min then the BluRay drive stopped recognizing discs, CPU usage spiked up to 70%+ (two cores are at 94-97% usage all the time), and it won't pick up USB devices.
HiJackThis log:
Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 2:32:41 PM, on 1/21/2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal
Obviously there a many, many different home desktop configurations out there. From a top of the line latest desktop setup to one that's 6 or 7 years old but is there an accepted "average" electrical power usage for the "common' home desktop PC? How would one estimate/check an individual desktop PC's energy use (ie. cost per hour or day if left on 24hrs) without having to purchase any expensive watt-o-meter type unit ?
Ok so before this lag i used windows vista (worked fine) and now i use windows 7 and when i unplug and plug in my computer i get really bad lag and sometimes it disconnects me from my wireless network and reconnects me. Now this happens about 80% of the time and its mostly when im running a game.
Computer Specs:
Computer Name: Compaq Presario CQ50-142US
Mother Board: Winstron Model: 360B
Cpu: Intell(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
Ram: 3072 MBs
Graphics Card: Mobile Intel(R) Express Chipset Family
If you need any more info just leave a response saying so and ill post what i can.
Windows 7 x64 pro? the original installed OS on the system? OEM = came pre-installed on system, What is the age of system (hardware)? 2.5 yrs What is the age of OS installation 2.5 yrs (have you re-installed the OS?-NO)
I have downloaded the Windows 7 RC1 ISO and "burnt" it onto a 16GB OCZ Throttle eSATA / USB drive (exactly as in the SevenForums tutorial). I can boot from this drive and install Windows with no problem.
But... I believe the 200MB system partition is somehow being placed on the flash drive, because once I disconnect it and attempt to boot, I get the standard "DISK BOOT FAILURE..." message.
I've followed the suggestions on the "How to avoid 200MB hidden system partition" page (i.e., pre-create the desired partitions on the installation drive rather than installing to unallocated space), but I'm still getting the problem.
The "Windows might create additional partitions..." dialog box popped up once, on my first installation attempt - and I did foolishly click "OK" to it. It hasn't appeared since for me to click "Cancel" to, however much I try deleting and remaking partitions
Has anything changed in RC1 regarding the system partition? Is it more persistent in creating it than it was with the Beta?
As i just recovered from a bunch of BSOD's caused by cheap Chinese RAM, i now just got a stop error while unplugging a cheap Chinese capture card.This is not the first time this happened. Here's the most recent BSOD. EasyCAP is JUNK!.zipI really hope this is nothing critical. I'm still licking my wounds from my last Stop Error Misfortune Set.
I use my computer mainly for living room entertainment and I use my HDTV (LG LED 1080p) as my main computer screen. Everything used to work fine but I've recently started having problems with the sound. When I turn the computer on, the sound works perfectly. However, if I close the TV or change the input from my computer to anything else, and then go back to the computer, the sound is gone.I looked through the sound options in the Control panel and noticed that the sound problem comes from my TV speakers (identified as AMD HDMI output) being unplugged. This is obviously impossible because the speakers are in the TV so this must be a Windows problem. This output works perfectly when the sound is on.My TV is connected to my computer through a single HDMI cable for sound and image (ATI Radeon 5700 graphics card and ASUS M4A79XTD EVO motherboard on-board soundcard, both with latest drivers). I use Windows 7 premium home edition 64-bit and I have 4 GB of RAM. i found that either logging off from Windows or restarting the computer will bring the sound back on. Unfortunately, as soon as I turn off the TV or change the input, the sound goes off again.
i have unplugged my hard drive from my pc and plugged back in then this message comes up "reboot or select proper boot device or insert boot media in boot device and press a key"
I tried to install window 7 to new Extreme SSD couple times but I always got the same message:Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and restart your computer. If you continue to receive this error message, contact the hardware manufacture.Status: 0xc00000e9..Info: An unexpected I/O error has occurred.
So pc is working fine I unplug ethernet cable into laptop to access internet on it,works fine, put ethernet back into computer and now there is no access to the internet. The internet still works as I checked it by plugging it back into laptopThe pc is working all software etc. but there is no internet accesswhen internet works on laptop it says public network but on pc network is unidentified and i can't change it. I tried making a new connection but it asks for username and password and I've never done anything like that. Should i type one in and that creates the password etc. or would i need to have one to create it. I don't really know what the network thing is all about I'm a newb on that part.eI tried network trouble shooter and that didn't help either.
Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn�t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management.
If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys. Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
I was wondering if anyone is familiar with a method to enable sounds for when you plug in or remove a charger connected to your laptop. It is not a problem with my pc, but is an option that is not available for me which i would like to install to let me know if i accidentally unplugged the charger, particularly if I'm working on a full-screen feature. I have Windows 7 home Premium 32-bit installed.
I have a ACER D255 netbook with intel atom N550 (1.5ghz, 1mb L2 cache) 1gb DDR3 memory and 250 gb hdd. lately it has been a tad slow and freezing up will using google chrome. my task manager says right now that CPU usage is 4% but Memory is at 75%, sometimes up to 90%. it also says that i have 89 processes running.
I have had my laptop for around a year now, and it's always been pretty fast for a cheapish laptop, It's an advent modena m100 in blue, but recently it has started getting real slow, like my CPU Usage is at 100% all the time and my Physical memory usage is running quite high aswell, without even having any programs open.
When I first boot up the machine and start using it (win 7 ultimate 64bit) the memory usage stays arround 40%. If I keep using it, the memory usage will slowly increase until it reaches 99%. If I boot up the machine and just leave it there for a couple of hours, the same happens.I try to restart (via windows), it logs off, shuts down the system, the coolers keep spinning, the motherboard lights are still on, but it doesn't boot up again. It remains like that. I have to restart via reset button or power button.
I've done a lot of searches using variations of the above title and came up empty or just plain missed the answer.I'd like to know, if it is not asking too much, the following points:
1. What exactly is the function of Link State Power Management in the Power Options Advanced Settings, PCI Express?
2. What are the implications of using the options available:
a) Off.
b) Maximum power savings.
c) Moderate power savings.
d) Which option is the best selection for my Dell laptop.
I use my PC for audio production and I have a few external controller devices that are USB powered, for example a midi keyboard. I recently had to build PC due to a theft....long story short after building the new PC I've noticed that my USB buses have continual power to these external devices after I've powered down the PC. My old windows 7 PC did not do this. Is there a setting I can change to shut off power to the USB buses when I power off the PC? Or is this a hardware issue?
i've tried to set the option for pressing the power button to 'Do Nothing' so no body can shut the computer, and yet it shuts down by pressing the button, so why is that and how can i work this out?
Over the past 2 years my PC has been afflicted with random power off/power on/reboot events.It will go for months without these and then have multiples of the events in a day. (I had 8 of them 3 days ago.)I assume I have a hardware problem, but nothing has been found and I'm grasping at straws.The time between power off and power on is several seconds.I had assumed this rules out a software cause, but maybe I'm wrong. I know Windows can schedule a power off, but can it tell BIOS (or something) to power back on in a few seconds?I know blaming the power supply is a much more simple explanation, but then I'm left with explaining the intermittent nature of the failure.
From many days the battery icon is missing from the taskbar, the notification icon is greyed out even if the laptop is not on AC. i followed the the tutorial System Icons - Enable or Disable but nothing happened.
If I am surfing the net or looking up something on the net, my computer will almost come to a stop and get very very slow, when I go to the task manager, I find the CPU usage at 100% and just stays there. When I look at the processes there are several that are high (DWM.exe (20-23%, Taskmgr.exe, FireFox.exe
I am using windows 7 ( 64 bit ) my cpu usage is now 100 % and memory usage is almost near to 2 GB..I installed Avast months back.now i have newly installed Microsoft Security Essentials ..
1) when i try to uninstall Avast there is no uninstall option even in Add/Remove program it does not show up in list.
2) When i try to end process of Avast it shows me message ."Access Denied " although i am administrator and only single user
3) What i want just to keep my CPU Usage down ( almost 5 to 10 % Max )because i have not installed any thing to use CPU usage like 100 % I have visual 2008 with Sqlserver 2005 and office 2007, like these
My Audiodg.exe process is currently using 2,786,070 kB (not just normal bytes, kilobytes) of Ram. 2.66gb+ of Ram! I have searched the web as well as this site for any problems. My audio is working fine though... I have no idea why this using so much ram. Im guessing a memory leak of some kind... I restartand it starts off at a normal pace...
My computer wouldn't shut down, even with holding in the power button, and so I just let it run out the battery. Then it wont turn on. I tried holding down the power button to clear out any charge that might be remaining. I have managed to get it back on, but I have to make a connection at the clip where you plug the power button ribbon into the mobo. Also, this is the second time I have had to do this. The computer works fine afterwards...or seems to anyway.
My daughter has a Hp laptop and it was working fine, but the screen was coming apart. so my husband put it back together, Now it will not come on. It's getting some power but not coming on at the power button. The lights flashes when you push the button then nothing.