I have a Printmaster Platinum program which I LOVE! I have tried for hours to get this program to install on desktop Windows 7. It worked perfectly fine on the XP.So, I purchased a newer one, Printmaster 2011...I HATE the new Printmaster 2011, just hate it.I have tried everythink to try to install on the desktop but the Printmaster Platinum will not install on my desktop with Windows 7,,,however... it will install on my laptop with Windows 7 and works fine.
I installed Weathrbug Plus and for some odd reason recently when I run it Windows runs the installation for the program. When I run the prograsm I get the typical "Preparing to install..." abnd then tyhe 'Configuring Weatherbug. I've been in contact with Weatherbug Support all day and we can't seem to find an answer.I'm using Microsoft Security Essentials.This is a clean install of Windows 7. I haven't used any other real-time security software other than MSE.I disabled MSE and tried it and got the same results.
Im looking for a portable program which includes a Browser and a Mailing program, like Opera is, but NOT Opera (must be able to run beside Opera & Firefox!!)
I don't know where this error hs_err_pid came from.I closed down explorer and there were all this notepad messages on my desktop and I can't get rid of them. Researching, I know this is a Java thing. I've uninstalled and reinstalled several times to no avail.My windows update is fully updated.I've run 3 virus programs.I notice this was addressed for someone using XP but what of Windows 7? My add/remove program file only contines the program Java (TM) update 29. Nothing else is listed as far as Java is concerned.I've run cleaner programs and these did not take care of the problem. Every time I restart my machine these errors immediate pop up at start up.
Im trying to run a program on Windows 7. The program is a logitech installer. But Windows 7 Program Compatibility Assistant blocks the program and prevent me from running it. I have tried disable the Program Compatibility Assistant service in the service manager and i have also enabled the "Turn off Program Compatibility Assistant" group policy.But windows still keep blocking the program.
I have been using a program called Raw Therapee. I downloaded a new version and on installing it quit saying the old version must be removed. I could not find it listed in Revo Unistaller Pro, so I did a forced uninstall with the location of the main executable. This removed a lot of stuff. I checked the program folder and the folder and many files were still there, so I deleted them. I did a CCleaner in between and after. I then unhide and show system files and deleted the folders in the Appdata of main user and admin account, couldn't find it anywhere else. CCleaner again and reboot. Went to install the new version again and it claimed that the old version was still installed. I did a search for *aw The* and found an entry in the hidden Program Data Folder. In the Admin account it will not let me in this folder to delete any remnants of the old version of Raw Therapee.
I have an issue with my ArcSoft TV program. Recently something changed and now I get the UAC pop up asking if I want this program to make changes to my computer.Issue is this, I can set to record a program, but with the pop up now coming up, I have to be avaliable to click to record the progarm.Currently I have the UAC set not to ask (pop up). However I understand the reason for the UAC asking and I prefer it to ask. So what I need is a way to allow ArcSoft to run without the pop up, but all other programs to ask for security. What is the way to do this for this one program?
I have W7 IE and have downloaded a word processing program (AbiWord) which I want to add to list of Default Programs. how to get this program added to the default list?
Running Windows 7 Pro, 64bit.We have a package of scripts and programs that comprise a custom application for OpenOffice 3.2 (do not want to upgrade OO at this point). We must support our package on Win XP, Vista and 7.A bunch of our scripts start up OpenOffice by running the command: C:Program FilesOpenOffice.org 3programsoffice.exe (with arguments).Works fine on XP. Fails on Windows 7 because the OO program installs itself into Program Files (x86). Even if I change properties of the installer file, in the Compatibility tab, to Win XP SP3, AND tell the installer to put it in C:Program Files, Windows 7 still installs it into Program Files (x86). We would LIKE to have the same script work on both flavors of Windows. I know we can modify our scripts to branch on which Windows, and choose two different paths to soffice.exe, but that's messy.I can't solve it by creating a shortcut in Program Files, to the program in Program Files (x86); that's not allowed.Is there some solution in Windows 7 to find the program no matter which place it lives? Like, a semi-intelligent environment variable for ProgramFiles that looks in one place, then the other?
I gave a try to the Setup Project of VStudio 2008 to create and distribute an x86 installer of a program I develop in Windows 7. After installing, uninstalling and executing over and over some of the features of my release distribution, I suppose I broke a windows registry or something related. I can't run anymore this app, whether from executing from the shortcut or directly, it just sends an error "Couldn't start the application correctly (0xe06d7363). Accept to close", there is no other option. Later I found out that moving exactly the installed content somewhere else out side the Program Files x86 dir, the application works flawlessly. Browsing, finding and deleting all references in regedit for my program didn't fix anything. I double checked my project is fine, and also created another installer version using the tool Inno setup producing exactly the same behavior; good install, error message when executing it inside the Program Files folder. Am clueless what else to do with the OS to fix this. Using CCleaner and/or my anti virus don't show any broken reference to my program, it seems clean. Can anyone help me?
I tried to open a program using the open with option and it changed the icons for every program on my laptop. I changed the desktop (network, my computer etc) icons back to default but can't manage to change the others. If i go into properties for the program and change it that way it doesn't do anything.
Trying to understand why windows 7 has program files and (x86) program files. Using windows premium 64 bit.Sometimes programs get installed to program files and sometimes they go to (x86) program files what is the difference?
I have a program that can only run on 64-bit computers, and my 32-bit computer won't run it. Is there any way to convert the program to 32-bit?(there is no 32-bit version of this program). EDIT: I made a mistake in the title.
I have a program installed under "C:Program Files (x86)CompanyNameSWName". When the program runs it's supposed to copy some files, say FROM "C:Program Files (x86)CompanyNameSWNameDrivers*.abc TO "C:Program Files (x86)CompanyNameSWNameDrivers*.xyz
The program works on every machine it's been installed on, except for one (customer's) Win 7 64-bit machine. On that machine, nothing happens.
It's noteworthy that on that same machine an "insufficient access privileges" (or some such) message pops-up when an administrator trys to copy a folder to "C:Program Files (x86)CompanyNameNewName".
why this particular Windows 7 machine is being so picky? What should I have the installer do so that the application will be able to copy/rename its own files?
Recently, for the umpteenth time, I tried the Windows DVD Maker and it actually worked! However, on the next attempt I get: "The program cannot access the file because it is being used by another program"I am burning a dvd-rw with several files, but I am not told which one is being accessed by another program.
Is it possible to install the program bar mac uses to scroll through programs without going to start>All Programs. I dont want to reinstall with Mac's Operating system. I like the compatibilities I get with Windows 7.
I have created an application with Microsoft visual C# express 2008 (don't know if the version matters to you or not, figured I'd mention it). I was wondering if it is capable of running in a PE environment (I guess it does not have to be 3.1, as long as it works). I'm using this application for a business venture, and I would like to have a back up just in case the HDD dies or something. This program utilizes a webcam, printer, and uses the .NET v3.5 Framework I don't know what complications that adds to this task.
As I've learned, my old 16 bit program won't load on my Windows 7 64 bit. If I install my "old" Windows XP, will I then be able to run the old program? Is it that simple?
Having problem with some program appears different in windows 7 its like the frames are stretch so much that it push other buttons out screen and no matter how much I resize the window the frame resize with it hence I can't see the other buttons it works on Xp fine I try compatibilty mode but it still the same.
I have a problem with an existing program I have had for years. I had the installation program on my disk, but after re installing Win 7 I somehow have lost the installation program. It is an old one and therefore not awailable any more. I have the program installed on an disk partition, buit when clicking on the icon it tells me that window cannot find language.dll.I have the program installed on another Computer running XP, but it is very slow.Is there any way I can get into Window and install the missing file myself. Alternative would be to remove the XP disk from the old computer and install it on the newer computer, but I might get problem with having both XP and Win 7 running on the same computer.
I've just installed SP1 for Windows 7 64 Bit Home Premium. Now I cannot run ANY programs. When I try to start an app I get message "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item". I cannot even go back to the restore point as I can't run that program either! I am the administrator on the PC, the only account. I'm using AVG AV and Zone Alarm.
this is about windows 7 but it could also fit in the games or hardware section too. I'm trying to run a few games in the new windows 7 but I'm running into a problem. One or two are pretty old I mean early 2000's old and when I go to install them I get an error message saying that the programs are not compatible with windows 64 bit version. My question is-is there a way to make a non compatible program compatible with 64 bit windows? Is there some setting or drive that can be changed that can make these programs work or am I pretty much done?
How do I choose the location I want to install a program to in Windows 7. The software I am trying to install does not give me an option, it just installs to programs. The problems is that an associated program which also does no give me an option, defaults to X86 and therefore does not do the job I want it to.
I inadvertently installed an OEM version of Windows-7- 64 professional in order to boot it up occasionally in BOOT CAMP in Mountain Lion.THE QUESTION: Can I use an UPDATE version to change the OEM flavor of this OS to a NON-OEM flavor.
