[64-bit] Faulty "unsupported 16 Bit App" Messages
Nov 26, 2011
I recently installed a new 64bit win 7 ULT on my machine. The strange thing is that almost every file I download, will not run and will display the "unsupported 16 bit application", even for the adobe flash download...
If I download the same file from another machine - It would run fine on the 64bit machine that couldn't run it....
I d/l with chrome/IE/FDM with the same result.
View 3 Replies
ADVERTISEMENT
Jul 13, 2012
I just bought a new case for my pc (CM Storm Trooper) and in the top front there is 2 USB 2.0 ports and 2 USB 3.0 ports build in (plus some other stuff) so i was wondering if there is a way that i can get the 3.0 ports working on my ASUS M4A77T Motherboard, which i don't think supports USB 3.0? Is there any adapter/PCI Interface that can make these ports useable?
View 2 Replies
View Related
Oct 5, 2011
I have a Creative XFi Exterior Sound card installed on my Windows 7 (64) bit system.Device manager is telliong me the SB XFi is there, I have down loaded every driver, I've checked everwhere I can but i still get this message: - Setup is unable to detect a supported product on your system.Please ensure your product is properly installed before running this Setup Program.
View 7 Replies
View Related
Jan 28, 2012
Recently I've installed an incompatible Borland C++ compiler (16 bit application) and due to the incompatibility with 64 bit version of the windows even the uninstaller feature cannot work. Now I'm in a situation of not being able to uninstall the compiler and therefore cannot install the 64 bit application due to corruption.
View 6 Replies
View Related
May 24, 2012
Recently Ms-word is not supporting old saved documents, I got continiously error of unsupported format, I tried to convert the file format to .docx but it's not working
View 2 Replies
View Related
Jun 20, 2011
how to get aero with an unsupported graphics driver? i went through the internet went to reg edit n all and i tried my best to set them right... while switching off the computer the screen fades away... but don't have the blurred task bar and the title bar..
View 3 Replies
View Related
Jul 26, 2012
I have three ram sticks. One, I had replaced because it had been scanned as being faulty. After a while I began to have the same problems as when I still had the ram stick, so I I took out one to see how it worked, and it was fine, so I assumed the one I had taken out was faulty as well, but later I found it to be a little suspicious, so I tested the second bad one in the slot that my good one had been in and it worked. Then I tried the good one in the slot that the bad ones had been in and that's when I had a problem, so it appears my ram stick slot is the problem. Is there a way to find real proof ?
View 4 Replies
View Related
Feb 7, 2011
I have an unsupported graphics card, and would like to force enable the aero theme, so i can se the aeropeek (taskbar preview), animations, and the transparency and blur effects (glass), but have so far been unsuccessful - does anyone know how i can do this?
View 8 Replies
View Related
Jan 2, 2010
I got a new LCD tv today and wanted to use it as a monitor as well.
I've connected it up as my main monitor so when its connected via VGA my laptop goes blank and the screen is on the tv.
I was messing with the resolutions to try get the right one and now it says its in an unsupported resolution.
The problem is, I cant change it coz the screen wont show on the tv and its not showing on laptop because i set it not too.
When I unplug the connection I cant change the settings for the external so Im stuck at what to do.
View 9 Replies
View Related
Jan 15, 2013
I am seeing the following error when attempting to connect to a remote computer with TightVNC...
View 2 Replies
View Related
Jan 8, 2010
How to Enable Aero in Unsupported Editions of Windows 7 ?
View 0 Replies
View Related
Nov 22, 2012
I'm having some strange problems with my PSU. My computer went black last night while I was playing GTA IV. After some research on the web, I came to a conclusion that my PSU died. I attempted the paperclip trick with no success - fans didnt do anything. I was about ready to start shopping for a new one, plugged everything back into places, when I saw a red 115V/230V switch on the back. I switched it from default 115V to 230V and tried the paperclip test again. This time the fan on the back of the case (not PSU) started spinning, and lights on the front and the green light on CD-ROM lit up. I plugged the 24 pin connector back into the motherboard, and hit the on switch (still with 230V), and the same thing happened.From what I described above, what do you think has gone wrong with my PC? And why is PSU acting the way it is?
View 9 Replies
View Related
Jan 15, 2013
I am completely stumped as my keyboard has gone haywire and am quite annoyed i cant fix itAm running windows 7 on toshiba satellite pro laptop and was wondering if its a software or perhaps hardware issue.Here is what is happening:- Caps lock light doesnt stay on anymore but it flashes when i press it. It does still work properly though- Left SHIFT key still works but when i press it.....it also creates this symbol ~ at the same time within UK keyboard. If i change to US keyboard then it enters the PIPE symbol.- The ~ key above the tab key actually does this And the pipe key which is above the Enter key types this: #7
View 5 Replies
View Related
Nov 8, 2011
how can i format my PC when DVD player is faulty
View 2 Replies
View Related
Jan 28, 2012
I'd seen many USB card readers advertised, and I ordered the SanDisk MicroMate (a SDHC device), thinking I could connect this to my android tablet and quickly have additional (using a new 8GB SDHC card) storage for reading and writing. When the connection was made, however, the message was "Blank USB storage; USB storage blank or has unsupported format" I offer this to indicate that the reader does seem operational. The card couldn't be accessed using the tab's file managers. In an attempt to figure out the problem, I tried using it on my two Windows PCs (both Win 7-64b computers, a desktop and a laptop) and found what are to me confusing results:
1. If I insert the new 8 GB SDHC card into the internal card reader of either of my computers, it is immediately accessible. I was able to copy a file to it. Format is FAT32.
2. If I connect the reader to a powered USB port on either computer, the reader device is shown with no errors in Device Manager, but when the card is inserted into the reader, the error "the drive must be formatted" appears.
View 1 Replies
View Related
Dec 1, 2011
So, I recently picked up this external hard drive from a friend, who was having some issues with it. From his first description I thought I would be able to solve it myself, but i1-The Hard drive, is a standard external one connected to the PC via a standard USB cable ( One regular USB connector on the PC side and a small one, I believe they are refered to as 'mini-USB Type B' on the drive's side).2-When connected to the PC it shows up like an internal hard drive, strangely, not with the external devices.3-It cannot be browsed or accessed in any other way, the windows explorer will either, load -extremely- slowly, without success, OR freeze OR simply say it cannot be accessed.4-The furthest I got in terms of interacting with it, was to uninstall and reinstall it via disk manager.
5-All other attempts fail, formatting is impossible as a right click leads to the problems described in point 3. (I tried to format after uninstalling/installing the drive, since a message came up telling me to do so, eventhough I was planning to do it anyway)6-The drive brand is completely unknown to me, it was purchased in Hong Kong and bears the label 'Buffalo'.
View 2 Replies
View Related
Nov 21, 2011
I thought this was a problem only when I had my monitor switched to 120hz because it turned off alot back when I had it on, so I had been playing with 60hz for a while and tried my luck turning it back to 120hz, worked for a few days but now it seems it cant handle it, even in 60hz. It's a newly built PC!I have checked graphics card with Furmark and no problems there, ran memtest overnight, passed tests. I cant upload any minidump files because it is empty. I've reseating heatsink[CODE]
View 5 Replies
View Related
Jun 3, 2012
I recently plugged in a Corsair Voyager USB stick which turned out to be faulty. As part of confirming this (after not being able to access it in Windows) I checked if it was visible in the BIOS which it was but seems to be dead. I removed the Voyager drive but upon the restart Windows failed to load, it gets to the load screen and just as the animation starts it BSODs for 0.5 of a second and then restarts. It does this without fail in safe mode and does the same with the HDD plugged into another PC.Nothing in the Recovery Console fixes the problem, CHKDSK says there are no issues, for some reason Sys Restore isn't functioning in the RC etc etc. I managed to get the stop code:stop: 0x0000007B (0xFFFFF880009A98E8,0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)This suggests to me that there is probably an issue with the SATA / chipset drivers and I can only assume that they have somehow been corrupted when Windows was trying to detect the faulty USB stick. I know that SATA drivers can be installed separately on a Win install but surely you can also re-load them or load default drivers in the Recovery Console from either the Windows 7 disk or chipset drivers from another location
View 9 Replies
View Related
Aug 24, 2012
I am stuck trying to figure out whether or not an optical drive messing up could have some serious performance repercussions. This is because my computer is freezing pedantically and I took Windows' advice and assumed it was my HDD which was corrupt.i bought a new one, installed it and everything seems all right at the moment, the only problem is is that I am on a fresh install of windows and my optical drive is being temperamental - sometimes working, other times not even realising it has a disc in it. When it does realise it has a disc in it, the applications (such as driver installers) crash mid-way through their process - my computer locks up and begins to freeze again, but this time, I can just eject the disk and everything sorts itself out almost straight away.
View 9 Replies
View Related
Jan 4, 2013
I am trying to install Windows 7 in Parallels on an iMac, but with no luck. I have spent hours with Apple and Parallels but they cannot succeed in helping me either. It all stumbles on the classic "Boot manager missing". Now, the question is, is it possible that this is because the Win 7 CD is faulty, or does anyone have any other solution? Ctrl+Alt+Del obviously does not work, as I am on a Mac.I have tried using a disk image. No luck.I have tried to de-activate the storage disk, leaving only the SSD with Mac Mountain Lion active.
View 1 Replies
View Related
Jun 11, 2012
I was playing Skyrim last weekend, and the game froze on a black screen just as it was cutting to a kill animation. I had to restart the computer but when Windows loaded I had a BSOD. The computer booted fine up till this point.I've been looking up causes and fixes all week, and the dump files seem to suggest a 0x116 Video_TDR_error. I've attached all the requested information.I've already tried installing several different graphics drivers - the newest, the one supplied with the card, and one between. Windows and DirectX were fully up to date. I've also tried formatting the hard drive and installing Windows fresh, twice. I've had the computer back to the state it arrived in, when the drivers worked fine, and I've tried it with only the video drivers installed. Everything I try now is still resulting in the same BSOD.I can only get Windows to load in Safe Mode, or if I go into Device Manager and disable my graphics card. I am now fairly convinced the card itself is the problem, and I'm looking for confirmation before I go and get a new one fitted.The computer was new at the end of November. I had the same Windows install since then, but now I'm running a fresh install.
View 3 Replies
View Related
Sep 7, 2011
Patin Couffin engine for 64bit System (AMD) is faulty. Problem found on many computers is due to a 'Windows 7 update issue' apparently. I have been told a factory reset is the only answer...
View 1 Replies
View Related
Mar 19, 2012
Can faulty heatsink cause computer to shut down within seconds of starting?
View 3 Replies
View Related
Dec 3, 2012
Computer is a Sony Vaio VGC-RC110G (not sure about motherboard). About 3 weeks ago computer starts refusing to boot giving errors that make me think the hard drive is bad. Computer will still occasionally boot after 5-10 tries. I bought a new hard drive and tried to create an image of the old drive onto the new using Clonezilla, the process gave a few errors. The computer flatly refused to boot from the new drive (gave disk read errors). However, when I could boot using the old drive, I could get in and explore the image of the new drive and the image copy process seemed to have worked okay.
As part of the disk image copy process, my new drive had 2 partitions and about 900 megs of free space. The two partitions were the main windows partition from the old drive and the recovery partition. I combined all partitions and formatted the new drive (using Gparted) because I thought that the disk image copy probably just recreated errors in the old drive onto the new. After the format, my computer then consistently refused to boot from either drive. (in the past I could boot to the old drive after a couple of tries). The error was usually "a disk read error occurred' or "BOOTMGR is missing."
Attempts to install windows using windows install DVD failed because computer couldn't write to the new hard drive. Both hard drives would usually appear in bios when I entered into it (I know at least one time where neither appeared in the bios), although sometimes computer would fail allow me to edit bios altogether. I attached the new hard drive to a different computer and installed a clean version of windows 7 Ultimate x86 to the new drive. The different computer boots just fine from the new hard drive. But when I move the new hard drive to back to the old computer I consistently now get "a disk read error occurred" error.
I don't believe it is a SATA cable issue because power to drive seems to be fine and I had to use the SATA cable from the old computer when hooking the drive up to the different and it worked fine. Also, Gparted recognizes the drive just fine and has no problems formatting partitions etc., so there is communication happening through the SATA cable and the power cable is powering adequately.TL;DR summary: New hard drive works fine with new computer, but old computer (when connected to same new hard drive) gives me a "disk read error occurred." Based on the evidence, I don't think it's a faulty drive issue. I'm also skeptical that it's a cable issue, but haven't 100% ruled out this possibility. What should I do next in terms of identifying the problem? I've currently exhausted my (admittedly limited) hardware troubleshooting .expertise.
View 1 Replies
View Related
Jan 23, 2012
I am not technical enough to understand the messages I get - they are quickly gone before the PC shuts down and then restarts each time. I have zipped up the report and dump files - System bought with Win 7 64-bit Pro SP1 as an OEM install and is about 6-months old. I have added a PCI-E USB card to add additional USB ports and a second hard drive. Running 8GB of Corsair RAM and BSOD happens at random times - from simple web browsing to web design sessions with several software packages open. I cannot see a pattern to the shutdowns.
View 6 Replies
View Related
Nov 5, 2011
how to view the messages that pops-out from the taskbar other than error messages? As I have pop-out messages which blinks only once, thus, I was not able to see what was the message about.
View 1 Replies
View Related
Aug 21, 2009
I just started getting Windows is not genuine messages starting this morning
on both my netbook and desktop. I have never downloaded a crack or any of that kind of crap, so have other window 7 RC users started getting this message to?
When I go online to fix the problem I noticed it says this:
http://www.microsoft.com/genuine/dow...s.aspx?Error=6
If you are running Windows 7 Beta or the Windows 7 Release Candidate (RC), you are seeing this message because the product is not yet available for purchase. Learn more about Windows 7. So did Windows just start showing this on all Windows 7 RC's or what?
I got my registration keys from windows, and downloaded from there. Never downloaded from a torrent site. I've had Windows 7 RC on both my netbook and desktop since it came out in May, and never had an issue until now. SO?
View 9 Replies
View Related
Jan 12, 2012
I am getting error messages on start up first one is C:windowssystem32igfxtray.exe and the second one is C:windowssystem32igfxpers.ex
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: Total - 595958 MB, Free - 546612 MB; D: Total - 14216 MB, Free - 1587 MB;
Motherboard: Hewlett-Packard, 166A
Antivirus: win 7 anti spyware
View 3 Replies
View Related
Oct 28, 2009
I have a new W7, 64bit, machine. I'm using Windows Live Mail because Outlook is no longer included with Windows Office (which I bought).Everything is working well. I've imported the contacts from Outlook 2003 into WLM, no problem.How can I export the messages from Outlook into WLM.It's a new machine and came with a trial version of Windows Outlook 2007 installed so I opend it and imported the messages from the old Outlook 2003 into the new Outlook 2007 on the new machine, now I'm stuck. I can't see how to get the messages into WLM.
View 3 Replies
View Related
Sep 8, 2011
I am recieving a ridiculous amount of alert messages, and I have no idea what they are! There is no bubble in the bottom right corner, or anything popping up. I have no idea why these alert messages are occuring so frequently, but I would love for them to STOP.
View 2 Replies
View Related
Oct 21, 2012
ive got a new Dell laptop (Feb this year) running windows 7 64 bit, im not to up on pcs so might need idiot proof instructions.Im not aware that ive uninstalled anything, but am now getting a small oblong box comes up at varios times, with the messageAXSLE.dll is missing from your computer.
View 3 Replies
View Related