Un-repairable STOP: 7B Error Following Using A Faulty USB Drive?
Jun 3, 2012
I recently plugged in a Corsair Voyager USB stick which turned out to be faulty. As part of confirming this (after not being able to access it in Windows) I checked if it was visible in the BIOS which it was but seems to be dead. I removed the Voyager drive but upon the restart Windows failed to load, it gets to the load screen and just as the animation starts it BSODs for 0.5 of a second and then restarts. It does this without fail in safe mode and does the same with the HDD plugged into another PC.Nothing in the Recovery Console fixes the problem, CHKDSK says there are no issues, for some reason Sys Restore isn't functioning in the RC etc etc. I managed to get the stop code:stop: 0x0000007B (0xFFFFF880009A98E8,0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)This suggests to me that there is probably an issue with the SATA / chipset drivers and I can only assume that they have somehow been corrupted when Windows was trying to detect the faulty USB stick. I know that SATA drivers can be installed separately on a Win install but surely you can also re-load them or load default drivers in the Recovery Console from either the Windows 7 disk or chipset drivers from another location
View 9 Replies
ADVERTISEMENT
Dec 3, 2012
Computer is a Sony Vaio VGC-RC110G (not sure about motherboard). About 3 weeks ago computer starts refusing to boot giving errors that make me think the hard drive is bad. Computer will still occasionally boot after 5-10 tries. I bought a new hard drive and tried to create an image of the old drive onto the new using Clonezilla, the process gave a few errors. The computer flatly refused to boot from the new drive (gave disk read errors). However, when I could boot using the old drive, I could get in and explore the image of the new drive and the image copy process seemed to have worked okay.
As part of the disk image copy process, my new drive had 2 partitions and about 900 megs of free space. The two partitions were the main windows partition from the old drive and the recovery partition. I combined all partitions and formatted the new drive (using Gparted) because I thought that the disk image copy probably just recreated errors in the old drive onto the new. After the format, my computer then consistently refused to boot from either drive. (in the past I could boot to the old drive after a couple of tries). The error was usually "a disk read error occurred' or "BOOTMGR is missing."
Attempts to install windows using windows install DVD failed because computer couldn't write to the new hard drive. Both hard drives would usually appear in bios when I entered into it (I know at least one time where neither appeared in the bios), although sometimes computer would fail allow me to edit bios altogether. I attached the new hard drive to a different computer and installed a clean version of windows 7 Ultimate x86 to the new drive. The different computer boots just fine from the new hard drive. But when I move the new hard drive to back to the old computer I consistently now get "a disk read error occurred" error.
I don't believe it is a SATA cable issue because power to drive seems to be fine and I had to use the SATA cable from the old computer when hooking the drive up to the different and it worked fine. Also, Gparted recognizes the drive just fine and has no problems formatting partitions etc., so there is communication happening through the SATA cable and the power cable is powering adequately.TL;DR summary: New hard drive works fine with new computer, but old computer (when connected to same new hard drive) gives me a "disk read error occurred." Based on the evidence, I don't think it's a faulty drive issue. I'm also skeptical that it's a cable issue, but haven't 100% ruled out this possibility. What should I do next in terms of identifying the problem? I've currently exhausted my (admittedly limited) hardware troubleshooting .expertise.
View 1 Replies
View Related
Dec 1, 2011
So, I recently picked up this external hard drive from a friend, who was having some issues with it. From his first description I thought I would be able to solve it myself, but i1-The Hard drive, is a standard external one connected to the PC via a standard USB cable ( One regular USB connector on the PC side and a small one, I believe they are refered to as 'mini-USB Type B' on the drive's side).2-When connected to the PC it shows up like an internal hard drive, strangely, not with the external devices.3-It cannot be browsed or accessed in any other way, the windows explorer will either, load -extremely- slowly, without success, OR freeze OR simply say it cannot be accessed.4-The furthest I got in terms of interacting with it, was to uninstall and reinstall it via disk manager.
5-All other attempts fail, formatting is impossible as a right click leads to the problems described in point 3. (I tried to format after uninstalling/installing the drive, since a message came up telling me to do so, eventhough I was planning to do it anyway)6-The drive brand is completely unknown to me, it was purchased in Hong Kong and bears the label 'Buffalo'.
View 2 Replies
View Related
Aug 24, 2012
I am stuck trying to figure out whether or not an optical drive messing up could have some serious performance repercussions. This is because my computer is freezing pedantically and I took Windows' advice and assumed it was my HDD which was corrupt.i bought a new one, installed it and everything seems all right at the moment, the only problem is is that I am on a fresh install of windows and my optical drive is being temperamental - sometimes working, other times not even realising it has a disc in it. When it does realise it has a disc in it, the applications (such as driver installers) crash mid-way through their process - my computer locks up and begins to freeze again, but this time, I can just eject the disk and everything sorts itself out almost straight away.
View 9 Replies
View Related
Sep 28, 2012
Brand new computer, upon installing Windows 7 could not boot into windows due to missing file errors. The HDD I am trying to install onto is a SSD, I will provide system specs at the end of the post. Anyway I unplugged my secondary SATA hard drive and then I was able to install Windows 7 and boot into windows.Now after all my drivers have been installed I am recieving error messages when logging into Windows. I ran SFC.exe and the log output gave me hundreds of lines saying Cannot repair member file. Here is an example:
2012-09-27 20:28:38, Info CSI 00000116 [SR] Cannot repair member file [l:24{12}]"fpcmbase.sys" of avmx64c.inf, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
[code]....
I have tried re-formatting again only to have the same issue. Maybe it has something to do with me trying to install onto the SSD drive? I have not yet tried installing windows onto just the SATA HDD I have and disconnecting my SSD.
System Specs:
Intel Core i7 3930k Processor
ASUS P9X79
32GB [4GB x8] DDR3-1600 G.Skill Ripjaws X
NVIDIA GeForce GTX 670 - 2GB - EVGA Superclocked - Core: 1046MHz
240 GB Corsair Force Series GT SSD
2TB Hard Drive 7200rpm
View 1 Replies
View Related
Jul 26, 2012
I have three ram sticks. One, I had replaced because it had been scanned as being faulty. After a while I began to have the same problems as when I still had the ram stick, so I I took out one to see how it worked, and it was fine, so I assumed the one I had taken out was faulty as well, but later I found it to be a little suspicious, so I tested the second bad one in the slot that my good one had been in and it worked. Then I tried the good one in the slot that the bad ones had been in and that's when I had a problem, so it appears my ram stick slot is the problem. Is there a way to find real proof ?
View 4 Replies
View Related
Nov 22, 2012
I'm having some strange problems with my PSU. My computer went black last night while I was playing GTA IV. After some research on the web, I came to a conclusion that my PSU died. I attempted the paperclip trick with no success - fans didnt do anything. I was about ready to start shopping for a new one, plugged everything back into places, when I saw a red 115V/230V switch on the back. I switched it from default 115V to 230V and tried the paperclip test again. This time the fan on the back of the case (not PSU) started spinning, and lights on the front and the green light on CD-ROM lit up. I plugged the 24 pin connector back into the motherboard, and hit the on switch (still with 230V), and the same thing happened.From what I described above, what do you think has gone wrong with my PC? And why is PSU acting the way it is?
View 9 Replies
View Related
Jan 15, 2013
I am completely stumped as my keyboard has gone haywire and am quite annoyed i cant fix itAm running windows 7 on toshiba satellite pro laptop and was wondering if its a software or perhaps hardware issue.Here is what is happening:- Caps lock light doesnt stay on anymore but it flashes when i press it. It does still work properly though- Left SHIFT key still works but when i press it.....it also creates this symbol ~ at the same time within UK keyboard. If i change to US keyboard then it enters the PIPE symbol.- The ~ key above the tab key actually does this And the pipe key which is above the Enter key types this: #7
View 5 Replies
View Related
Nov 8, 2011
how can i format my PC when DVD player is faulty
View 2 Replies
View Related
Sep 24, 2012
Having a BSOD error on boot and simply put MS support says it is a RAM issue and when I run any other diag it says HDD issue.History is the machine suffered the fake hard disk errors bug a few months ago and we thought we removed that completely, then a few days ago the pc did an update and after auto restart has not worked the same.The machine boots fine till it gets to starting windows and then BSOD.Have tried /mbr - replaced fine but no difference?Have tried AVG Boot drive and scan - Found a few sus files and removed them still no difference?Have tried chkdsk /r - this found no errors Also cannot boot in any of the modes at all?
View 14 Replies
View Related
Mar 11, 2012
The blue screen A problem has been detected and windows has been shut down to prevent damage to your computer I also get this messege when I try other options:
Problem signature:
Problem Event name : StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21201006
Problem Signature 05: AutoFailover
Problem Signature 06: 10
Problem Signature 07: NoRootCause
POS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
I have Windows 7 Home, 64bit, 4 G of RAM, GTX 285, Intel Core 2 Quad I had recently installed trial version of Kapersky . I had an earlier message after trying to restart and a black screen with the message bad image sector or something like that. It started several times before. Now it will not start and I had to disable the automatic startup and I got the above messege. I cannot do the system restore because it just won't and I hear Kapersky sometimes prevents this. No detecable disk errors have been noted but it still will not even boot into safe mode. This process just keeps repeating and nothing seems to be helping. I had this message before when my screen flickered before but the computer kept running. It has restarted automatically before also but with no problems. My system will also, not restore to another check point. I am ready to reinstall windows.
View 4 Replies
View Related
Aug 4, 2012
I built my system about 2 years ago and I've done my research and ran the memtest and stress tests and they all passed. But, I still get BSODs and it seems very random, if I'm listening to music, playing games, or just surf the net I get a BSOD now and then. It happens once every month but in the past week it crashed multiple times so I'm at my wits end.
View 4 Replies
View Related
Nov 5, 2009
The OS is crashing when viewing a flick in TVU Player. So far, this is the only time this occurs, I can watch a variety of other video apps without any problem (knock on wood). What I did find searching seemed to point to a general concensus that the root of the problem was the Nvidia driver, but those posts were over a year old, and I would hope that Nvidia would have gotten it straight by now.
The process mentioned in the BSODs is nvlddlkm.sys, which obviously is part of the nvidia drivers. I'm currently using the latest Nvidia driver, and it didn't sound like going back to an older driver was likely a solution.
Since this appears to only effect TVU Player, one might think that it is the culprit, but I have tried several different versions of it without an improvement. Bottom line is whether anyone has any relevant suggestions, other than just stabbing in the dark?
View 3 Replies
View Related
Jun 2, 2009
I Have Problem With Win 7 In Installing when Restart Windows in first time after copying files that error Is : *** Stop : 0*00000(......)
In the Black Screen.
View 0 Replies
View Related
Nov 21, 2011
I thought this was a problem only when I had my monitor switched to 120hz because it turned off alot back when I had it on, so I had been playing with 60hz for a while and tried my luck turning it back to 120hz, worked for a few days but now it seems it cant handle it, even in 60hz. It's a newly built PC!I have checked graphics card with Furmark and no problems there, ran memtest overnight, passed tests. I cant upload any minidump files because it is empty. I've reseating heatsink[CODE]
View 5 Replies
View Related
Jan 4, 2013
I am trying to install Windows 7 in Parallels on an iMac, but with no luck. I have spent hours with Apple and Parallels but they cannot succeed in helping me either. It all stumbles on the classic "Boot manager missing". Now, the question is, is it possible that this is because the Win 7 CD is faulty, or does anyone have any other solution? Ctrl+Alt+Del obviously does not work, as I am on a Mac.I have tried using a disk image. No luck.I have tried to de-activate the storage disk, leaving only the SSD with Mac Mountain Lion active.
View 1 Replies
View Related
Sep 28, 2012
STOP: C000021a {Fatal System Error}The initial session process or system process terminated unexpectedly with a status of 0x00000000 (0xc0000221 0x001003a8). The system has been shut down.This error or any other type of error occurs when I try to run repair or if I remove my internal Cd-Rom.
View 1 Replies
View Related
Aug 12, 2011
My computer hasn't blue screened in a while, and this time it's a different error, I'm pretty sure. I zipped and attached my minidump file.
View 2 Replies
View Related
Apr 23, 2012
I've encountered this crash around 6 times in the last few days, always when running games: Star Trek Online [throuh Steam], Neverwinter Nights 2 [through Steam] and Sid Meiers Pirates.I have filled in as many of the system details as I can to the profile - if more are needed, please tell me how to get the information.I also attach reports from CPU-Z, the Minidump and what I can from SF Diag Tool.The most recent changes I have made to my computer are: Defragmentation C drive. Windows 7 defrag. 10 passes. 22/04/12 approx 1400-1800GMT Uninstall multiple games 22/04/12Install driver for Logitech N305 Wireless NumberPad approx 5/04/12 [This component works correctly]It's been suggested that it may be a fault with the GPU - apparently, the driver from it was last updated 29/07/09. I'd prefer not to fiddle with it until we're sure that that caused the problem, which first arose around a month ago.
View 1 Replies
View Related
Jul 15, 2009
I have a FW-1082 mixer/sound device connected to a firewire pcie card, and my problem is that whenever i try to shutdown or restart computer i get a bsod. after some research on the net, i have found that i can make a net stop .bat file to stop "AudioSrv" and "AudioEndpointBuilder". However when i run the batch file for the "AudioSrv" i get a System error 5 has occurred, Access is denied, message. Can anyone please tell me how i can resolve this?
View 3 Replies
View Related
Mar 23, 2012
I needed to reinstall windows on my laptop, but I had to recover some files from the hard drive, so I took the hard drive out and connected it to my desktop PC. I installed the windows on the hard drive using my desktop PC too, because the laptops DVD ROM doesn't work anymore. I successfully installed windows on it, everything worked. I put the hard drive back in the laptop, booted the laptop and it popped up a BSOD saying:Check for viruses on your computer. Remove any newly installed hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK/F to check for hard drive corruption, and then restart your computer.Technical information:***STOP 0x00000073(OXFC8D3640), 0xC0000034, 0x00000000, 0x00000000
View 3 Replies
View Related
Jun 11, 2012
I was playing Skyrim last weekend, and the game froze on a black screen just as it was cutting to a kill animation. I had to restart the computer but when Windows loaded I had a BSOD. The computer booted fine up till this point.I've been looking up causes and fixes all week, and the dump files seem to suggest a 0x116 Video_TDR_error. I've attached all the requested information.I've already tried installing several different graphics drivers - the newest, the one supplied with the card, and one between. Windows and DirectX were fully up to date. I've also tried formatting the hard drive and installing Windows fresh, twice. I've had the computer back to the state it arrived in, when the drivers worked fine, and I've tried it with only the video drivers installed. Everything I try now is still resulting in the same BSOD.I can only get Windows to load in Safe Mode, or if I go into Device Manager and disable my graphics card. I am now fairly convinced the card itself is the problem, and I'm looking for confirmation before I go and get a new one fitted.The computer was new at the end of November. I had the same Windows install since then, but now I'm running a fresh install.
View 3 Replies
View Related
Sep 7, 2011
Patin Couffin engine for 64bit System (AMD) is faulty. Problem found on many computers is due to a 'Windows 7 update issue' apparently. I have been told a factory reset is the only answer...
View 1 Replies
View Related
Mar 9, 2012
As you've probably heard countless of times before this error has come up on my HP Paillion G6 laptop. I have tried the recovery disk to repair startup but nothing happened. I don't have a Windows 7 disk either...I need this repaired by Sunday as this is the only time I have other PCs to use in case I need to download/burn anything.
EDIT: I also forgot to mention I have no system restore points and I cannot boot last known configuration or boot into Safe Mode?
View 1 Replies
View Related
May 30, 2012
I finished building a day trading PC and had a BSOD last night with a 0x0000016 stop error. The minidump is attached. System Specs:
AMD A6-3650
Asus F1A55-M LX Plus M/B
8 GB DDR3 Ram
Sapphire Flex Radeon HD 6450
2 WD HDD's in RAID1
SeaSonic M12II 620 Bronze PSU 620Watt
3 Asus Monitors
Clean Install Windows 7 HP x64 with Important updates
Catalyst 12.4 Drivers
View 2 Replies
View Related
Sep 8, 2012
I've been intermittently getting blue screens with the stop error 0x00000124, which the internet told me is either a driver or hardware issue. I've run memtest for 5 passes on both sticks of RAM and there were no errors. I do overclock my CPU, but my system is water cooled and the temp is always stable. In addition when not overclocked I still will get a blue screen sometimes. Here are my specs.
OS - Windows 7
x64
Windows 7 (Custom Build)
Not OEM
1-2 years old
1 year. I re-install Windows every so often for tidiness.
CPU: Intel i7 2600k
Video Card: EVGA Nvidia GTX 570 Super Overclocked
Motherboard: Intel Gigabyte Z68X-UD3H-B3
Power Supply: Antec TruePower Quattro 850W
The zip with the jcgriff2 report is too big for the upload limit. So I uploaded it here: [URL]
View 5 Replies
View Related
Nov 11, 2011
It seems I've been having random BSOD Stop errors ever since I put my new PC together about a month ago. I'm not sure what's causing it, and it's happened when I've been doing different things, but it almost seems to happen more frequently when I'm listening to Pandora Radio on my web browser (chrome).Switched my BIOS from AHCI to IDE (read on google this fixed some issues). Did not fix the issue.Read the windows website and attempted to get a hotfix for SATA hard drives (something about them not waking up in 10 seconds). Hot fix claimed it could not install on my computer. Gave up on it.Some system information (copy-pasted from newegg, forgive me if it's a lot of uselessness):
CPU: Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 BX80623I52500K
Motherboard: ASUS P8P67 PRO (REV 3.1) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Video Card: EVGA 012-P3-1571-KR GeForce GTX 570 HD w/Display-Port (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Boot Drive: Corsair Force Series 3 CSSD-F120GB3A-BK 2.5" 120GB SATA III Internal Solid State Drive (SSD)
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL
Storage HD: SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Windows_NT6_BSOD_jcgriff2 attached with PERFMON.html file inside the folder.
View 7 Replies
View Related
Apr 29, 2012
so lately ive been getting BSOD all the time,i cant play a game more than 15 min before i get BSOD, and when im surfing it takes a little bit longer but after an hour or two of doing NOTHINg on the computer, i still get bluescreen. i dont know what to do, i think its the graphic card that is messing with me. because if i touch it, i almost get burnt, its really hot. error code is stop: 0x00000124 (0x0000000000000000, 0xfffffa8007c9c028, 0x00000000f2000000, 0x00000000002008f) ive never posted here, nor do i know alot about this
View 3 Replies
View Related
Sep 1, 2012
My computer has recently had this problem where it cannot continue to run normally for more that 5 minutes or so before it slows down then BSODs. It seems to start up normally and everything works just fine for a short amount of time until applications stop responding. Sometimes the taskbar disappears and there's an error message with the title of "jusched.exe - Application Error" without the quotes. When I click ok to terminate the program I just see my wallpaper for a few seconds before it BSODs. Other times it just BSODs after applications stop responding.The part after STOP always seems to be 0x000000F4, but I'm not sure about the rest.I'd also like to know if I need to wait a certain amount of time before I can shut down my computer during the BSOD. It seems to say something like "initializing the disk for dumping" for quite some time.
View 8 Replies
View Related
Jan 13, 2013
I am receiving a stop 7e error on install of windows 7 x64 on a new build pc.
View 9 Replies
View Related
Nov 25, 2012
I've almost built a new system with the exception of a dvd drive. But I was too anxious and wanted to start it up already (I couldn't put my old dvd drive in the new computer because it has an IDE connector and my mini mobo only has sata connectors, no IDEs). So I put my new HDD in my old computer, installed Windows 7 on it (it installed fine, I got into Windows fine) then put the HDD back into my new computer. I started up my new computer and it seemed to boot fine, but when it got to the "Starting Windows" screen just when the logo is about to come together, the computer reboots itself. I turned off automatic reboot on start up errors and I got a BSOD with a STOP error 0x00007B. The computer will not go into Safe mode, it just reboots after loading some drivers. I've tried to do "Repair windows" but it doesn't work.
View 2 Replies
View Related