When clicking on Programs & Features to uninstall printer X5150 I get the following error message:
%Build Template Error%, I have tried to uninstall it from the Device Manager but I stil cannot uninstall it from Programs and Features.
I downloaded and installed the vist drivers for lexmark x2530 its all good but when I try to fax it says send failed with no what sounds like modem connect. Tried other software like Faxmachine and able to fax with no problems. Where could my problem be.
View 6 Replies View RelatedI want to uninstall ati catalyst 9.2 so i can try ati catalyst 9.7 with sims 2 and see if it has compatibility issues like 9.3-9.6 had for me.ATI catalyst 9.2 was all i could get to work with sims 2 and i want to try 9.7 to see what happens.
When i selected the ati catalyst icon in control panel to uninstall an error message appeared about ati catalyst installation manager stopped working.I did get the screen for removing the ati software and pressed next,but nothing happened except the ati catalyst icon in the programs section of control panel disappeared without actually uninstalling the driver/catalyst software.
Also,i retried uninstalling by pressing setup.exe in c:/ati/support/9-2_vista64_dd_ccc_wdm_enu_75977/setup.exe
all that happens is that catalyst install manager stopped working error messages pop up and also i get problems and solutions icon appear after each uninstall failure regarding "solve a problem with microsoft visual studio".It's about this....
FIX: An application that uses the Mfc80.dll module or the Mfc80u.dll module crashes after you install a product that updates the module version
I've no idea if there is any relation,but before getting the hotfix i want to know what alternatives i have in uninstalling ati catalyst 9.2.
Unfortunately I installed some freeware that was not compatible with Vista. Now I am not able to uninstall it. I select "uninstall" in the software, "allow" it and then I get a message: "NTVDM.exe has stopped working". I am not able to proceed with the uninstall procedure.
View 6 Replies View RelatedI 'partially' installed a Click'N'Design program on my Vista Home Premium before the computer 'hung' due to obvious incompatibility. Unable to uninstall it now with Control Panel's 'uninstall a program' which returns an error message 'unable to locate the Install.log file'. Windows Install Clean Up does not list this program (as I presume it wasn't installed using Windows Installer).
View 5 Replies View RelatedI am runningOS windows vista ultimate 32bit. When I go to programs and features to uninstall a program all that is displayed is organize and views. When I click on a program I never see the uninstall displayed. Is this normal! How can I uninstall programs if it does not display the uninstall feature.
View 6 Replies View RelatedI have tried to uninstall fonts as administrator (no one else uses my computer and I have an admin. acct) with the UAC both off on on. I need permission. Try again. and again and again? I particularly want to get rid of all the annoying fonts that begin with @ to get them to the top of the list in Wordperfect X3.
View 7 Replies View RelatedVista states an installer is already running when attempting to uninstall any software. Error:"Another program is being installed. Please wait until that installation is complete, and then try installing this software again."Even while logged in as Admin, after reboot, turing off Anti-Virus, and checking the running processes for any msi or Windows Installer entries. At one point I disabled the Windows Installer service, rebooted the PC, and then started the service again just to get an application installed.
View 4 Replies View RelatedI have windows vista and it is not compaitble with most of the games I like to play. I went to compatabilty wizard and went through the process but I am still unable to open the game. I get a response that says "ths application can be launched with a relase version of Microsoft Windows 95/98/ME/NT 4.0/2000/XP/Server 2003" I have Windows 98 that I would like to install so I can play this game. When trying to install Windows 98 it states that it is not compatible with Vista. Can I uninstall Vista to install Windows 98?
View 5 Replies View RelatedI have been trying for the last 4 or so hrs to try and uninstall Trend Micro Pro 2008, but to know evail. Tell ya, drive a man to drinking. Tried to install the 09 version, so it can replace the 08 version, but comes up with a error and can't install. Tried manually, but no go. Does anyone know how to really maually, I.E. file by file or any other way.
View 6 Replies View RelatedI think I may have a problem: I have installed the Vista beta service pack (6001). But I don't know how to uninstall it. I have gone to add/remove programs/view installed updates and it doesn't appear there. I definitely have it, because under My Computer it says: Windows Vista ™ Ultimate Service Pack 1, v668 On my desktop, on the bottom right hand corner, it says: Windows Vista ™ evaluation copy. Build 6001. In Windows Updates, it has an entry on 15/12/2007: Update for Windows Vista (KB937287) - Build 6001.17052 (x86). Status: successful. When I double click on it, the information panel says (among other things) it cannot be uninstalled. It has another entry, also 15/12/2007: Vista Service Pack 1 Release Candidate 1 - Bulid 6001.17052 (x86). Status: failed. I believe that I have to uninstall the beta service pack before I can load the full version when it is released. Also,
View 4 Replies View RelatedRecently installed a video converters (Stoik Video Converter). However, when I try uninstalling it, I receive the following message, "Setup.exe has stopped working". After I close the dialog window, I see a popup on the task bar that says Setup.exe was closed due to Data Execution Prevention. Kind of frustrating that I can't even uninstall the program. Error details below:
Problem signature:
Problem Event Name:BEX
Application Name:setup.exe_InstallShield (R)
Application Version:10.50.0.125
Application Timestamp:4178b4a2
Fault Module Name:StackHash_4a9e
Fault Module Version:0.0.0.0
Fault Module Timestamp:00000000
Exception Offset:008d08e0
Exception Code:c0000005
Exception Data:00000008
OS Version:6.0.6000.2.0.0.768.3
Locale ID:1033
Additional Information 1:4a9e
Additional Information 2:236f2a1c65038fb7ca5862ccab73aabe
Additional Information 3:7f6a
Additional Information 4:a44f06ddc95f9aed1c0e8b4741db58d8
Looked across several forums and haven't found any answer to this type of question
I am using Window Vista. I am unable to uninstall Window Live Messenger (latest version). I go to control panel, under program, I saw those with window live xxx and i remove it but i cant uninstall/change window live essentials and i cant find the Window Live Messenger there. I exit the icon that appear at the bottom of the screen. I even remove it from the program. But after i restart the PC, Window Live Messenger appears again.
can you tell me a way to uninstall Call of Duty other than through putting in the disk and pressing UNINSTALL or in the 'All Programs'? Because it just won't uninstall there: I press install and the window simply closes and nothing else. I am asking this because I have found some patches on the Activision website (now I can get on it again) and I wan't to reinstall it...
View 9 Replies View RelatedI bought a Lexmark 3400 series all in one printer. I have been using in with my desk top computer with Mcro. Offive and it has worked great. I recently purchased a lap-top with Vista. We loaded the printer program on to the lap-top and made it the default. When we go to print we get the message that the computer can not communicate with the printer.
View 4 Replies View RelatedI have Vista Home Premium 32 bit.
I was having problems installing a program (Berlitz German Premier) where the install would just disappear halfway thru the process. A program would not appear under my programs list but when I went to Uninstall an icon for uninstall of the Berlitz software appears for each time I tried to install it. However I get the following error messages (see attached document with screen captures) when I tried to delete it the traditional way.
When I use Windows Install Clean Up utility, the program is nowhere to be found on the list; thus I can't use that program.
I have a Lexmark Printer which worked with Windows 98. Now it won't work with
my new Emachines computer with Windows Vista Home Premium. I have downloaded
the recommended updates, but all I seem to get is the documents put in the
queue, but does not send to the printer to begin printing.
I have a Lexmark Optra R laser printer that I bought in 1996! But it works great and will outlast anything you can buy today. When I got my new computer with Vista I found I couldn't install it. The driver seems to be available, but the computer just doesn't recognize the printer.
View 7 Replies View RelatedMy Lexmark X2450 has been working on my Vista PC since May'07. Sometime in the last few weeks something has changed and initially it seemed that it wouldn't print anything. Lots of experimentation and uninstalls later, I've come to the conclusion that the printer is O.k. as it will print test pages and IE web pages, but I can't get it to print anything else, (Word docs etc. These show as spooling, printing then deleting in the print queue. Note: Last night, I gave up trying at 2am turned the printer and PC off and turned it off at the wall - the next morning my son turned on the PC and some of the print attempts from last night printed!
View 6 Replies View RelatedI have spent so much time on this already. I had Lexmark all-in-one X5260 and an old Epson printer installed on my Vista Business Sony Vaio laptop without problem since early 2008. Yesterday I removed the old Epson, with problems, as it had a test print still in the spooler. Since then I have had ???Spooler SubSystem App??? problems and been unable to re-install or print from the Lexmark. I did System Restore back to the day before I removed the Epson printer. I carefully removed the Epson printer. Still no printing with Lexmark. I have followed the recommendations of many of the posts here, especially ???Spooler SubSystem App??? with Alan Morris and Eddie. I uninstalled Lexmark. I followed the procedure recommended in and presumed I deleted the drivers and spoolers.
However I was unable to do the ???net stop spooler??? and ???net stop spooler???. I got the response ???System error 5 has occurred. Access is denied???. In Command Prompt I was not at the root directory, I was at C:UsersVaio. (Vaio is my user name.) I am the only user of this laptop and my printer is plugged into a USB port, not networked. I then tried to install from the Lexmark 5200 Series CD. Before getting to the ???detecting your printer??? phase, I got the Spooler SubSystem App closed error message. Lexmark 5200 now appears in my printers but a test page print or doc print does not work.
I have a senior friend with a Lexmark 8350 AIO (Vista drivers available)installed via USB on a XP home laptop. The XP laptop sees the internet via an ethernet connection to a Belkin wireless router. The XP Lexmark XP Driver software was installed and the printer worked fine. He shared the printer in XP. He hs another laptop loaded with Vista Home Premium that he has connected wirelessly via the Belkin router. Both computers are on the same workgroup. He can see folders and files files of each computer on the other computer. When he tried to set up Lexmark as a network printer in the Vista laptop, he sees the share name but the print wizard fails with a code 0x0000000d. Based upon comments located here
View 6 Replies View RelatedI'm running Vista Home Premium SP2 with 2 GB of RAM, all WU's, Firefox, MBAM, SuperAntiSpywareProfessional, CCleaner, Spybot, CA Security Suite, and WLM. The machine's running just great but after the last restart (to complete the uninstall of Ad-Aware) my little Lexmark All-In-One printer icon is missing from the notification area. It's usually placed right next to my network icon. I've tried restarting the service (an app called `lxcz_device') using `services.msc' but to no avail. The printer works just fine. how to get that icon back again without doing another restart?
View 6 Replies View RelatedI recently bought a new laptop with Vista pre-installed. I installed the Lexmark x4850 (which worked under XP)on the new HP laptop. Whenever I try to print something, the Windows Interactive message comes up as follows: Program: C:windowssystem32spoolsv.exe Module: C:windowssystem32spooldriversw32x863lxdedatr.dll Run Time Check failure: 3 "siNUMBEROFTOPICS" used but not defined I select debug retry and get another message: Assertion Failed File: Dmrclibrary.cpp Line: 415 M_hlibmodule I select debug retry and get the first message again. I have looked at all of my usb's in device manager but it reports no problems. I don't know whether it is a Lexmark problem or Vista or both.
View 5 Replies View RelatedSomehow the 'uninstall' button disappeared for most programs on my Vista Home Premium box when I used Control Pannel -> Programs -> Uninstall a Program. A few programs still have 'uninstall' button available - those have 'installed on' showing. The rest (80+% of all)don't have 'installed on' values showing and don't have 'uninstall' button.
View 4 Replies View RelatedHas anyone successfully installed Lexmark X 4500 printer on 32bit Vista Ulimate? I have been at it for a few days also with tech support and so far no luck. I had downloaded the vista driver software from the Lexmark web site *cjb3500-4500en.exe* - it installs the software but cant find the vista driver. I have tried a clean uninstall, reinstalling the drivers, installing the drivers manually with add printers, and nothing has worked!!! also restored the vista to a before point and reinstalled still no use.
View 4 Replies View RelatedI keep getting the following error when I try to print. Job Status Window Interface has stopped Working. I called Lexmark and they said it was a windows problem. Has anybody had this problem? Is there a fix for it?
View 9 Replies View Relatedhey guys another thing here i have a Lexmark X1185 that i have networked for along time with xp on my desktop and vista on the laptop, now since i installed vista x64 on the desktop i can no longer print from the laptop, yes i know i need to reinstall it on the laptop one problem though i can't do that. i can find the printer but it wont connect to it.
i keep getting "windows cannot connect to the printer. operation could not be completed (error 0x0000000d). i do have both the x64 drivers and the x86 drivers installed on the x64 desktop.
I am unable to send email. Using Vista. Have emptied outbox as suggested in other posts. Outbox was emptied without difficulty, sent to drafts, then deleted. Created new email - tried to send - still couldn't. Error message - unable to connect to smpt server. Have gone to tols - accounts - servers - re-entered info.
View 7 Replies View RelatedI have tried all the official and miscrosoft published instructions on uninstalling SP2 Release Candidate for Vista Ultimate (in my case 32 bit). I have tried with tech support. So I have really gone the extra mile. I have very compelling reasons to not perform a new installation because of lost set up programs and keys which are essential to my business. I do have backups which go back before the SP2 installation (Release candidate). Is there no way or does anyone have knowlege of maybe just the directories or files I would need to reinstall; to uninstall RC 2 for Vista ?
View 7 Replies View RelatedI downloaded Vista x64 with built in sp2 RC. I have an msdn membership, and I put this on my laptop. It now says I have an eval copy. I understand that sp2 makes it say that, but my big question is that there is no way to uninstall sp2. Am I screwed when the final sp2 comes out? I understand you need to install previous betas to put final on.
View 8 Replies View RelatedAt first the automatic update always tried to install the sp1 when i shut the computer down but it always failed, so i decided to download the service pack manually and install it cause i hoped problems with the windows calender, instant search(cant find anything)and the help&support would be solved. well they were not but not just that. right now every time i start the computer it tells me that i didnt activate my windows yet. so i have to type in the 25 number
long product key and wait for the online activation every time. really annoying. i tried almost everything uninstalling the update and many computer recovery tries but after uninstalling the update for like 1/2 - 1 h and restarting (without a activation needed) i tells me, sp1 was not uninstalled...............