Lexmark 8350 Print On A Network
Apr 4, 2008
I have a senior friend with a Lexmark 8350 AIO (Vista drivers available)installed via USB on a XP home laptop. The XP laptop sees the internet via an ethernet connection to a Belkin wireless router. The XP Lexmark XP Driver software was installed and the printer worked fine. He shared the printer in XP. He hs another laptop loaded with Vista Home Premium that he has connected wirelessly via the Belkin router. Both computers are on the same workgroup. He can see folders and files files of each computer on the other computer. When he tried to set up Lexmark as a network printer in the Vista laptop, he sees the share name but the print wizard fails with a code 0x0000000d. Based upon comments located here
View 6 Replies
ADVERTISEMENT
Jun 5, 2008
I have a Lexmark Printer which worked with Windows 98. Now it won't work with
my new Emachines computer with Windows Vista Home Premium. I have downloaded
the recommended updates, but all I seem to get is the documents put in the
queue, but does not send to the printer to begin printing.
View 9 Replies
View Related
Apr 18, 2009
I recently bought a new laptop with Vista pre-installed. I installed the Lexmark x4850 (which worked under XP)on the new HP laptop. Whenever I try to print something, the Windows Interactive message comes up as follows: Program: C:windowssystem32spoolsv.exe Module: C:windowssystem32spooldriversw32x863lxdedatr.dll Run Time Check failure: 3 "siNUMBEROFTOPICS" used but not defined I select debug retry and get another message: Assertion Failed File: Dmrclibrary.cpp Line: 415 M_hlibmodule I select debug retry and get the first message again. I have looked at all of my usb's in device manager but it reports no problems. I don't know whether it is a Lexmark problem or Vista or both.
View 5 Replies
View Related
Mar 23, 2008
I have a desktop running XP with a Canon MP160 hardwired to it. I also have a laptop running Vista. When I first hooked up my router to the desktop computer with XP, verything was working fine. I could share files back and forth between the two computers and I could print over the wireless network. But for some reason now I can't print. I can't even find the printer through the add printer thing.
View 6 Replies
View Related
Apr 13, 2009
We have a small network with 3 PCs and 1 printer with wired connections to a router. All of the PCs can see each other on the network. One of the PCs cannot see or print to the network printer, though the other two can. The printer is shown as installed, but PING shows 4 packets sent, 4 packets received - 'Host Unreachable'. Is there some file or driver that might be corrupted on the one PC causing this... ?
View 7 Replies
View Related
Mar 23, 2008
I replaced the XP Home desktop machine (died) that hosts our laser printer. The new box is Windows Vista. After the usual pain of working through issues, it mostly is satisfactory. Two problems remain with network printing. 1) If the host machine (Vista) has fallen into an idle state (I haven't tweaked standard settings), my XP machine is unable to print to the printer on the Vista system. I have to go and move the mouse to wake it up. XP as a host never had this problem.
2) If either computer is rebooted for any reason, I lose access to the network printer. I have to delete it and add it again. I assume this has to do with the inability to retain the account/password to access the Vista system. I'd really like a fix for these annoyances.
View 6 Replies
View Related
Mar 23, 2008
In my 64-bit installation, the print spooler server suddenly stopped running (and will not restart). I've tried cleaning out registry keys (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrint), deleting the files out of Windows (C:WindowsSystem32spool) to no avail. The system log contains many of these:Error Service Control Manager Eventlog Provider7034None The application log contains these:WarningSpoolerSpoolss1035NoneThe print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.ErrorSpoolerSpoolss1027None The system failed to initialize the local print provider: Error 0. This can occur because of system instability or a lack of system resources.
View 4 Replies
View Related
Sep 20, 2009
I downloaded and installed the vist drivers for lexmark x2530 its all good but when I try to fax it says send failed with no what sounds like modem connect. Tried other software like Faxmachine and able to fax with no problems. Where could my problem be.
View 6 Replies
View Related
Mar 23, 2008
I bought a Lexmark 3400 series all in one printer. I have been using in with my desk top computer with Mcro. Offive and it has worked great. I recently purchased a lap-top with Vista. We loaded the printer program on to the lap-top and made it the default. When we go to print we get the message that the computer can not communicate with the printer.
View 4 Replies
View Related
Mar 23, 2008
running vista 64 SP1 RTM cannot print from IE nor print preview unless I turn UAC off in control panel. Cannot print even if opening IE as admin. (some sort of error message about C:/users/username/appdata/local/temp/low/ and some files therein.) Note, on a different machine with vista 32 SP1 beta2 refresh (never got around to installing SP1 RTM on this box) - UAC enabled and no print problem at all
View 5 Replies
View Related
Feb 6, 2009
We have recently got new hardware and upgraded to Vista. We have also just changed to fully networked printing. We are having some printing funnies, but mainly when printing from Excel - no idea why. Here is a selection of the printing problems we have had:
File-Print: Print dialog does not appear
File-Print/Print: Does not print, no printing message
File-Print/Print: Looks like it prints to printer (see printing message), but nothing prints out...........................................................................
View 4 Replies
View Related
Jan 17, 2009
When clicking on Programs & Features to uninstall printer X5150 I get the following error message:
%Build Template Error%, I have tried to uninstall it from the Device Manager but I stil cannot uninstall it from Programs and Features.
View 9 Replies
View Related
Jan 15, 2009
I have a Lexmark Optra R laser printer that I bought in 1996! But it works great and will outlast anything you can buy today. When I got my new computer with Vista I found I couldn't install it. The driver seems to be available, but the computer just doesn't recognize the printer.
View 7 Replies
View Related
May 4, 2008
My Lexmark X2450 has been working on my Vista PC since May'07. Sometime in the last few weeks something has changed and initially it seemed that it wouldn't print anything. Lots of experimentation and uninstalls later, I've come to the conclusion that the printer is O.k. as it will print test pages and IE web pages, but I can't get it to print anything else, (Word docs etc. These show as spooling, printing then deleting in the print queue. Note: Last night, I gave up trying at 2am turned the printer and PC off and turned it off at the wall - the next morning my son turned on the PC and some of the print attempts from last night printed!
View 6 Replies
View Related
Feb 9, 2009
I have spent so much time on this already. I had Lexmark all-in-one X5260 and an old Epson printer installed on my Vista Business Sony Vaio laptop without problem since early 2008. Yesterday I removed the old Epson, with problems, as it had a test print still in the spooler. Since then I have had ???Spooler SubSystem App??? problems and been unable to re-install or print from the Lexmark. I did System Restore back to the day before I removed the Epson printer. I carefully removed the Epson printer. Still no printing with Lexmark. I have followed the recommendations of many of the posts here, especially ???Spooler SubSystem App??? with Alan Morris and Eddie. I uninstalled Lexmark. I followed the procedure recommended in and presumed I deleted the drivers and spoolers.
However I was unable to do the ???net stop spooler??? and ???net stop spooler???. I got the response ???System error 5 has occurred. Access is denied???. In Command Prompt I was not at the root directory, I was at C:UsersVaio. (Vaio is my user name.) I am the only user of this laptop and my printer is plugged into a USB port, not networked. I then tried to install from the Lexmark 5200 Series CD. Before getting to the ???detecting your printer??? phase, I got the Spooler SubSystem App closed error message. Lexmark 5200 now appears in my printers but a test page print or doc print does not work.
View 7 Replies
View Related
Dec 28, 2009
I'm running Vista Home Premium SP2 with 2 GB of RAM, all WU's, Firefox, MBAM, SuperAntiSpywareProfessional, CCleaner, Spybot, CA Security Suite, and WLM. The machine's running just great but after the last restart (to complete the uninstall of Ad-Aware) my little Lexmark All-In-One printer icon is missing from the notification area. It's usually placed right next to my network icon. I've tried restarting the service (an app called `lxcz_device') using `services.msc' but to no avail. The printer works just fine. how to get that icon back again without doing another restart?
View 6 Replies
View Related
Mar 23, 2008
Has anyone successfully installed Lexmark X 4500 printer on 32bit Vista Ulimate? I have been at it for a few days also with tech support and so far no luck. I had downloaded the vista driver software from the Lexmark web site *cjb3500-4500en.exe* - it installs the software but cant find the vista driver. I have tried a clean uninstall, reinstalling the drivers, installing the drivers manually with add printers, and nothing has worked!!! also restored the vista to a before point and reinstalled still no use.
View 4 Replies
View Related
Mar 23, 2009
I keep getting the following error when I try to print. Job Status Window Interface has stopped Working. I called Lexmark and they said it was a windows problem. Has anybody had this problem? Is there a fix for it?
View 9 Replies
View Related
Mar 31, 2008
Program path: C:Windowssystem32spoolDRIVERSW32X863HPWSPRE0.exe This problem happens because of partial incompatibility with Windows Vista. Please contact the program or device manufacturer(s) for more information. UNQUOTE Job stays in the print queue despite deleting it, and I cannot print
View 4 Replies
View Related
Jun 11, 2009
hey guys another thing here i have a Lexmark X1185 that i have networked for along time with xp on my desktop and vista on the laptop, now since i installed vista x64 on the desktop i can no longer print from the laptop, yes i know i need to reinstall it on the laptop one problem though i can't do that. i can find the printer but it wont connect to it.
i keep getting "windows cannot connect to the printer. operation could not be completed (error 0x0000000d). i do have both the x64 drivers and the x86 drivers installed on the x64 desktop.
View 6 Replies
View Related
May 6, 2008
I have Vista x64 and I have read threads on this for weeks and can't fix it. I have file sharing/network discovery on, private network, password protection disabled, my shares set to everyone and everyone is on the same workgroup. My problem is that the x64 Vista computer will not see any of the XP (x86 or x64) computers and they can't see it from the Network Neighbourhood. However, if I type the IP address of the XP computers I
can access them. On the XP computers if I type the IP address I get an error that it isn't accessable and I might not have permission. However, if I type \192.168.0.100share or any of the other share names I access it just fine. pinging works too by IP but not by name. If I boot into the x86 install of have of Vista I can access XP computers from Vista and the Vista from XP by name and everything without typing any user names. The only differince between the two aside from x64 and x86 is that x86 isn't patched past SP1 as I don't use it often. Lastly after installing that XP patch I can see the x86 XP computers by name from the network map feature on Vista, still can't access them by name though...
View 9 Replies
View Related
Mar 30, 2008
I'm using Vista Home Premium and Windows Update tells me I'm up to date.
Every so often the Network icon in the System Tray tells me that it is not connected to a Network (by displaying a red X) though I can clearly see that I am.
View 9 Replies
View Related
May 19, 2008
I'm trying to network my new Optiplex 740 with Vista Business (32bit), and Norton 360, to my old Euro PC with W2K Pro. and SystemWorks, using basic Belkin /Realtek cards and yellow ethernet cable. My broadband connection is through my old machine and works perfectly, as does the network card installation.
My new machine also indicates that its card is correctly installed and functioning correctly. BUT the Network and Sharing Center window shows this computer as linked to an Unidentified network and no connection to either the other computer or broadband connection.........
View 7 Replies
View Related
Nov 27, 2008
I have bought DD a laptop for Christmas and thought I'd get it all set up beforehand. I already have a wireless network here at home, with 2 desktops running xp) and a macbook, they connect via a belkin wireless modem router. Vista however, doesn't even find a network, I get a message saying the network cable is nplugged. Its wireless enabled and the switch is on
View 9 Replies
View Related
Mar 16, 2009
One usb ethernet adapter for internet connection through an old router, one for a Linksys Wireless G router hard wired to remote security cameras sums up the problem where one cancels the other out. This is a problem for XP, Vista, and even 7 beta while the primary system still runs XP. The dsl connection is through an old dsl setup using a usb adapter while the Linksys pci adapter card or usb adapter once installed becomes the default network adapter.
The wireless router itself is plugged with the RJ-45 ethernet adapter directly into the main controller/dvr box for live wireless feed to the main XP system or this one as a second means along with direct plug in to a tv set in the room where the main box is located. In XP, Vista, and even the later 7 beta the same problem of running two adapters without conflict is the main question needing a working solution. This thread is intended to tax the most network familar people here.
The landlord runs the main XP system with eventual plans to upgrade to Vista while this system serves as a testing machine a good deal of the time explaining multiple OSs as a rule. The router and adapters are in working order not seeing any defects while canceling the original dsl adapter out when installed. That takes out the online connection in the process.
View 8 Replies
View Related
Dec 31, 2008
Bought a Freecom Network Drive (LINK) from PC World today and got it set up and it seemed to be working fine on my Vista computer until I tryed to get it set up on my XP computer. It seemed to get setup ok but then the whole thing just stopped working. The hard drive spines and it works fine when plugged in as USB device but when trying to connect it to the network it simply does not show up. I have a Belkin G+MIMO Router and the Network Hard Drive is a Freecom Network Storage Hard Drive 250GB
View 6 Replies
View Related
May 15, 2010
Just returned from holiday and while we were away I changed my laptop network in vista from private to public as advised and the internet worked fine. Now at home I can’t connect to my router, and I get a message saying that the details held on the computer is not the same as the router. Also there is no “customise” function being shown on the network and sharing centre screen to switch back to private network. I’ve tried everything to set up a connection, even a new one, but the same message appears all the time.
View 7 Replies
View Related
Aug 6, 2009
After trying at least a dozen suggestions without success, I followed this procedure to be able to print on a locally attached printer on a network PC with Win/XP home from another PC on the network that is running Vista Home Premium 64-bit ......
1. Open the Printers folder on the client computer from which you want to print, right-click a blank part of the window, click Run as administrator, click Add Printer.
2. In the Add Printer wizard, click Add a local printer.
3. On the Choose a printer port page, click Create a new port, select Local Port, and then click Next.
4. In the Port Name dialog box, type the network path to the printer to which you want to print. For example \server1printer1 (where server1 is the computer name of the print server and printer1 is the share name for the printer). Then click OK.
Note: Creating a local port instructs the client computer to use its own printer driver to render the printer as a RAW print job and send it directly to the port (which in this case goes to the print server). This obviates the need for the print server to provide feedback to the client, which can work around some authentication issues, as well as issues with mismatched driver versions on the print server and the client computer.
View 1 Replies
View Related
Jul 5, 2008
I have a few pcs networked together. All are running XP x86(using windows firewall) and have a different printer installed on each. I recently added a Vista x64 pc to the mix, it has no printer connect directly to it, and it can access all the other pcs from it(file sharing is good, same workgroup). My problems is that I cannot print from the Vista x64 system to any of the other Xp x86 systems. I have tried installing the 64 bit and 32 bit drivers on the Vista machine - Add printer - Add a network, wireless or bluetooth printer
-(I can see all the printers on the network) I select any and get this error message: The server for the 'HP Deskjet 1280' does not have the proper driver installed. If you want to search for the proper driver, click OK. Otherwise, click cancel cancel and contact your network administrator or original equipment manufacturer for the correct printer driver. - OK - i select the 64 bit drivers and receive this error message: Windows cannot locate a suitable windows driver. Contact your administrator for help locating and installing a suitable driver - when i try the x86 bit driver i get this message : Printer driver setup. Operation could not be completed(error 0x800f0214).
View 5 Replies
View Related
Feb 6, 2009
After trying for several months and not being able to print and haveing numerous other errors I am ready to go back to XP. I purchased this laptop new and it came with Vista Home Basic. I am tired of finding new compatibility issues every week and I still can't print properly. Is it possible to downgrade to XP without re-formatting so I don't have to reload everything? I have a licensed XP upgrade cd will it work?
View 8 Replies
View Related
Aug 17, 2009
I cant print on my dell xps 410 with vista and a HP photosmart 8450?
View 4 Replies
View Related
