I recently bought a new laptop with Vista pre-installed. I installed the Lexmark x4850 (which worked under XP)on the new HP laptop. Whenever I try to print something, the Windows Interactive message comes up as follows: Program: C:windowssystem32spoolsv.exe Module: C:windowssystem32spooldriversw32x863lxdedatr.dll Run Time Check failure: 3 "siNUMBEROFTOPICS" used but not defined I select debug retry and get another message: Assertion Failed File: Dmrclibrary.cpp Line: 415 M_hlibmodule I select debug retry and get the first message again. I have looked at all of my usb's in device manager but it reports no problems. I don't know whether it is a Lexmark problem or Vista or both.
I have a Lexmark Printer which worked with Windows 98. Now it won't work with my new Emachines computer with Windows Vista Home Premium. I have downloaded the recommended updates, but all I seem to get is the documents put in the queue, but does not send to the printer to begin printing.
I have a senior friend with a Lexmark 8350 AIO (Vista drivers available)installed via USB on a XP home laptop. The XP laptop sees the internet via an ethernet connection to a Belkin wireless router. The XP Lexmark XP Driver software was installed and the printer worked fine. He shared the printer in XP. He hs another laptop loaded with Vista Home Premium that he has connected wirelessly via the Belkin router. Both computers are on the same workgroup. He can see folders and files files of each computer on the other computer. When he tried to set up Lexmark as a network printer in the Vista laptop, he sees the share name but the print wizard fails with a code 0x0000000d. Based upon comments located here
my HP3940 isn't printing. When I send a document to print it will show briefly in the printer folder with the message saying spooling then everything disappears and nothing happens. Have tried restarting spooler but nothing seems to rectify. Printer says that it is ready but can't seem to get anything to get as far as the printer.
In my 64-bit installation, the print spooler server suddenly stopped running (and will not restart). I've tried cleaning out registry keys (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrint), deleting the files out of Windows (C:WindowsSystem32spool) to no avail. The system log contains many of these:Error Service Control Manager Eventlog Provider7034None The application log contains these:WarningSpoolerSpoolss1035NoneThe print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.ErrorSpoolerSpoolss1027None The system failed to initialize the local print provider: Error 0. This can occur because of system instability or a lack of system resources.
I downloaded and installed the vist drivers for lexmark x2530 its all good but when I try to fax it says send failed with no what sounds like modem connect. Tried other software like Faxmachine and able to fax with no problems. Where could my problem be.
I bought a Lexmark 3400 series all in one printer. I have been using in with my desk top computer with Mcro. Offive and it has worked great. I recently purchased a lap-top with Vista. We loaded the printer program on to the lap-top and made it the default. When we go to print we get the message that the computer can not communicate with the printer.
running vista 64 SP1 RTM cannot print from IE nor print preview unless I turn UAC off in control panel. Cannot print even if opening IE as admin. (some sort of error message about C:/users/username/appdata/local/temp/low/ and some files therein.) Note, on a different machine with vista 32 SP1 beta2 refresh (never got around to installing SP1 RTM on this box) - UAC enabled and no print problem at all
We have recently got new hardware and upgraded to Vista. We have also just changed to fully networked printing. We are having some printing funnies, but mainly when printing from Excel - no idea why. Here is a selection of the printing problems we have had:
File-Print: Print dialog does not appear File-Print/Print: Does not print, no printing message File-Print/Print: Looks like it prints to printer (see printing message), but nothing prints out...........................................................................
I have a Lexmark Optra R laser printer that I bought in 1996! But it works great and will outlast anything you can buy today. When I got my new computer with Vista I found I couldn't install it. The driver seems to be available, but the computer just doesn't recognize the printer.
My Lexmark X2450 has been working on my Vista PC since May'07. Sometime in the last few weeks something has changed and initially it seemed that it wouldn't print anything. Lots of experimentation and uninstalls later, I've come to the conclusion that the printer is O.k. as it will print test pages and IE web pages, but I can't get it to print anything else, (Word docs etc. These show as spooling, printing then deleting in the print queue. Note: Last night, I gave up trying at 2am turned the printer and PC off and turned it off at the wall - the next morning my son turned on the PC and some of the print attempts from last night printed!
I have spent so much time on this already. I had Lexmark all-in-one X5260 and an old Epson printer installed on my Vista Business Sony Vaio laptop without problem since early 2008. Yesterday I removed the old Epson, with problems, as it had a test print still in the spooler. Since then I have had ???Spooler SubSystem App??? problems and been unable to re-install or print from the Lexmark. I did System Restore back to the day before I removed the Epson printer. I carefully removed the Epson printer. Still no printing with Lexmark. I have followed the recommendations of many of the posts here, especially ???Spooler SubSystem App??? with Alan Morris and Eddie. I uninstalled Lexmark. I followed the procedure recommended in and presumed I deleted the drivers and spoolers.
However I was unable to do the ???net stop spooler??? and ???net stop spooler???. I got the response ???System error 5 has occurred. Access is denied???. In Command Prompt I was not at the root directory, I was at C:UsersVaio. (Vaio is my user name.) I am the only user of this laptop and my printer is plugged into a USB port, not networked. I then tried to install from the Lexmark 5200 Series CD. Before getting to the ???detecting your printer??? phase, I got the Spooler SubSystem App closed error message. Lexmark 5200 now appears in my printers but a test page print or doc print does not work.
I'm running Vista Home Premium SP2 with 2 GB of RAM, all WU's, Firefox, MBAM, SuperAntiSpywareProfessional, CCleaner, Spybot, CA Security Suite, and WLM. The machine's running just great but after the last restart (to complete the uninstall of Ad-Aware) my little Lexmark All-In-One printer icon is missing from the notification area. It's usually placed right next to my network icon. I've tried restarting the service (an app called `lxcz_device') using `services.msc' but to no avail. The printer works just fine. how to get that icon back again without doing another restart?
Has anyone successfully installed Lexmark X 4500 printer on 32bit Vista Ulimate? I have been at it for a few days also with tech support and so far no luck. I had downloaded the vista driver software from the Lexmark web site *cjb3500-4500en.exe* - it installs the software but cant find the vista driver. I have tried a clean uninstall, reinstalling the drivers, installing the drivers manually with add printers, and nothing has worked!!! also restored the vista to a before point and reinstalled still no use.
I keep getting the following error when I try to print. Job Status Window Interface has stopped Working. I called Lexmark and they said it was a windows problem. Has anybody had this problem? Is there a fix for it?
Program path: C:Windowssystem32spoolDRIVERSW32X863HPWSPRE0.exe This problem happens because of partial incompatibility with Windows Vista. Please contact the program or device manufacturer(s) for more information. UNQUOTE Job stays in the print queue despite deleting it, and I cannot print
hey guys another thing here i have a Lexmark X1185 that i have networked for along time with xp on my desktop and vista on the laptop, now since i installed vista x64 on the desktop i can no longer print from the laptop, yes i know i need to reinstall it on the laptop one problem though i can't do that. i can find the printer but it wont connect to it.
i keep getting "windows cannot connect to the printer. operation could not be completed (error 0x0000000d). i do have both the x64 drivers and the x86 drivers installed on the x64 desktop.
When I begin installng physx every thing goes ok, but when it is about to finish. Translating things that is not in english: Error 1935. Error when installing assembly. OR "Error when trying to install assembly" Last LINE: "Contact help and suport for more information"
After months of working fine, suddenly received the following messages: The connection to the server has failed. Subject 'Balance due on account', Account: 'Windows Mail', Server: 'mail.charter.net', Protocol: SMTP, Port: 25, Secure(SSL): Yes, Socket Error: 10061, Error Number: 0x800CCC0E
The connection to the server has failed. Account: 'Windows Mail', Server: 'mail.charter.net', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket Error: 10060, Error Number: 0x800CCC0E
I get this message when sending email. The connection to the server has failed. Subject '', Account: 'mail.comcast.net', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
The host 'pop3.aol.com' could not be found. Please verify that you have entered the server name correctly.
Account: 'brendan', Server: 'pop3.aol.com', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D and The host 'stmp.aol.com' could not be found. Please verify that you have entered the server name correctly.
I received an error: Error details: Code 57A. I tried multiple times to install, all with the same error. I did try downloading the update to my desktop, and install with the option "run as administrator...no luck. I am running Windows Vista Home Premium.
After trying at least a dozen suggestions without success, I followed this procedure to be able to print on a locally attached printer on a network PC with Win/XP home from another PC on the network that is running Vista Home Premium 64-bit ......
1. Open the Printers folder on the client computer from which you want to print, right-click a blank part of the window, click Run as administrator, click Add Printer.
2. In the Add Printer wizard, click Add a local printer.
3. On the Choose a printer port page, click Create a new port, select Local Port, and then click Next.
4. In the Port Name dialog box, type the network path to the printer to which you want to print. For example \server1printer1 (where server1 is the computer name of the print server and printer1 is the share name for the printer). Then click OK.
Note: Creating a local port instructs the client computer to use its own printer driver to render the printer as a RAW print job and send it directly to the port (which in this case goes to the print server). This obviates the need for the print server to provide feedback to the client, which can work around some authentication issues, as well as issues with mismatched driver versions on the print server and the client computer.
I have a few pcs networked together. All are running XP x86(using windows firewall) and have a different printer installed on each. I recently added a Vista x64 pc to the mix, it has no printer connect directly to it, and it can access all the other pcs from it(file sharing is good, same workgroup). My problems is that I cannot print from the Vista x64 system to any of the other Xp x86 systems. I have tried installing the 64 bit and 32 bit drivers on the Vista machine - Add printer - Add a network, wireless or bluetooth printer
-(I can see all the printers on the network) I select any and get this error message: The server for the 'HP Deskjet 1280' does not have the proper driver installed. If you want to search for the proper driver, click OK. Otherwise, click cancel cancel and contact your network administrator or original equipment manufacturer for the correct printer driver. - OK - i select the 64 bit drivers and receive this error message: Windows cannot locate a suitable windows driver. Contact your administrator for help locating and installing a suitable driver - when i try the x86 bit driver i get this message : Printer driver setup. Operation could not be completed(error 0x800f0214).
After trying for several months and not being able to print and haveing numerous other errors I am ready to go back to XP. I purchased this laptop new and it came with Vista Home Basic. I am tired of finding new compatibility issues every week and I still can't print properly. Is it possible to downgrade to XP without re-formatting so I don't have to reload everything? I have a licensed XP upgrade cd will it work?
I've tried everything I know of to get my Brother intellifax 4100 (USB) to print. It shows up as a printer icon and even says it's the default printer. But when I try and print nothing happens. No document even shows up in the print cue. At first it self-installed (but still wouldn't work) then I installed it on the virtual usb printer port. Don't really know what I'm doing in that area. In any case, it says it's properly installed but it acts like it's not even there. Everything was fine on the XP system - sorry we switched.
I have a XP desktop and a Vista laptop. I have the network configured and I can see the shared folders and printers on the XP desktop from the Vista laptop. I can access the shared folders and printer. I can send a print job to the printer from the laptop and I can see it in the print que but the job will not print it just sits there. I cant print a test page or any other document. I let Vista install the print drivers for the printer, a Lexmark 1270.
What happened in this case is I installed the printer just like any other network printer, but it doesn't print. I see the job in the queue, it spools, prints and then the queue is blank but nothing comes out of the printer. And there are no errors. I have verified from the XP machine the printer does work. I found another article in Microsoft's TechNet Forums.
It says to add a NEW local printer and use UNC naming to add the printer to the intranet. I have done this before at work with no problem. Vista is suppose to have these drivers built in, but when we tell it to add the printer after filling out the path to the printer \computernameprinter (using the shared name) it asks for the location of the driver. I do not know where to look for this and when I go to HP's www site I can not download the driver as it says it's built into the Vista operating system and doesn't offer it for download.
Where would I point the wizard to for the driver? I looked in the windowssystem32driversen_US folder, but couldn't tell if I was in the right place. I guess I could just keep putting folders in until I found the right one
I added HP printer using open as admintrator command through the control panel and I can see the printer on MS word control center, however it does not print at all. I tried printing via pdf and still it does not print. It seems that vista 64 is not seeing the printer.
