Unable To Boot From Dvd
Mar 23, 2008
I have a problem and can???t find any solution. When I try to start windows (Ultimate) from the original installation DVD (from which is was installed) then I get the " press any key to boot from CD / DVD" command. When I do it, the white bar at the bottom of the screen saying "Windows is loading files". Next is the black screen with the "Microsoft Corporation" and a running green bar at the bottom of the screen. And that???s it. The screen gets black after that and nothing happens. No HDD activity of any kind. I have a Norton Save and Restore CD for my computer which used to work just fine, but also with this CD I am running into the 100% exact same problem. Any bootable CD I have which doesn???t boot directly into Windows Vista is working perfectly. I also can boot from e.g. my old Windows XP CD. And, the Windows (Vista) installation DVD starts without problems at all in my other computer...
View 4 Replies
ADVERTISEMENT
Mar 26, 2008
I have a problem and can???t find any solution. When I try to start windows (Ultimate) from the original installation DVD (from which is was installed) then I get the " press any key to boot from CD / DVD" command. When I do it, the white bar at the bottom of the screen saying "Windows is loading files". Next is the black screen with the "Microsoft Corporation" and a running green bar at the bottom of the screen. And that???s it. The screen gets black after that and nothing happens. No HDD activity of any kind. I have a Norton Save and Restore CD for my computer which used to work just fine, but also with this CD I am running into the 100% exact same problem. Any bootable CD I have which doesn???t boot directly into Windows Vista is working perfectly. I also can boot from e.g. my old Windows XP CD. And, the Windows (Vista) installation DVD starts without problems at all in my other computer... My Windows installation itself is booting without problems from HDD....
View 4 Replies
View Related
Nov 15, 2009
I am unable to boot anything on my system. I have a black screen error File: pciidex.sys. When I try to use my restore disk I get a blue screen error Ox0000C1F5. I can not get into any of the Safe modes I just get the black screen error. And I am not able to boot the recovery system using PF11. It seems the only thing I can access is BIOS. I am not worried about saving files at this point. I really just want to restore back to factory settings and avoid needing to spend the money on a new hard drive. Any advise on how to re install with the errors I am receiving?
View 4 Replies
View Related
Nov 2, 2009
I am unable to get to bios so I can boot to my cd. I have a 64-bit Vista repair disk, but I am unable to boot to either that or an Acronis rescue disk. What can I try? I've tried every F-1 through F-12 combo I can think of...holding them down, pushing repeatedly, holding esc...holding delete, nothing is working. My screen is black...meaning, it is just like it is when in hibernation,etc. During all of my attempts, it did work once and went to my desktop, but unfortunately I tried to restore my acronis image instead of doing a system restore. how I can get into bios so I can get to my boot menu?
View 6 Replies
View Related
Jun 13, 2009
The only way I am able to boot his with a political CD/DVD in the drive, wait for the "press any key to boot from CD or DVD" prompt comes up, do not hit any key whatsoever and then the normal user prompt/enter password screen comes up. Additionally if I try to "Safe Mode Boot" I Blue Screen.
View 5 Replies
View Related
Sep 27, 2008
I have a duel boot on my system, win vista and windows xp. i installed windows vista 1st and then windows xp sp2 but after installing windows xp i am unable to log into windows vista. when i restart it directly starts windows xp rather than showing windows select option
View 4 Replies
View Related
Jul 1, 2007
i am unable to Dual boot in VistaBy going thru many forums i found that editing Bcdedit will resolve the issue, when i am trying to use the command Bcdedit/create {ntldr} -d "windows Server 2003" in the command prompt its giving error as description required, so iam unable to resolve this issue.
View 4 Replies
View Related
Jan 1, 2009
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
View 9 Replies
View Related
May 5, 2008
I am unable to send email. Using Vista. Have emptied outbox as suggested in other posts. Outbox was emptied without difficulty, sent to drafts, then deleted. Created new email - tried to send - still couldn't. Error message - unable to connect to smpt server. Have gone to tols - accounts - servers - re-entered info.
View 7 Replies
View Related
Apr 7, 2008
i can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
View 9 Replies
View Related
Oct 8, 2009
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
View 9 Replies
View Related
Mar 23, 2008
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies
View Related
Jun 3, 2008
Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies
View Related
Oct 12, 2009
I built a new machine.Running Vista Home premium,8GB of Ram,Phenom11 3.2MHz.
I have 2 hard drives.First one portioned to C: and D:
Second HD portioned into D: and E: I have Vista on C drive.I would like to Dual Boot Vista with Windows7.
My question is do I need a Boot loader application or does vista have the ability to dual boot?
View 9 Replies
View Related
Mar 23, 2008
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
View 7 Replies
View Related
Apr 16, 2008
This is the best install I have ever done (or was)…I did a fresh install and followed a tweak which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and……well…this is where I stuffed up…My BOOT screen no longer works properly, even with the original “winload.exe.mui” file replaced.
I downloaded and used “Vista Boot Logo Generator” I loved the results on my last install…It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig…ect….BUT......
View 6 Replies
View Related
Jul 29, 2009
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
View 6 Replies
View Related
Mar 24, 2008
XP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set
Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
View 5 Replies
View Related
Jul 1, 2008
I've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution:
1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so)
2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu).
3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
View 5 Replies
View Related
May 21, 2008
I need to do a CD/DVD Boot and I cannot find the option in the BIOS Boot Menu.
View 4 Replies
View Related
Aug 31, 2008
hp tool ask to do this "Then please go to “using DOS system files” column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
View 4 Replies
View Related
Mar 23, 2008
I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore.
I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
View 5 Replies
View Related
Mar 8, 2009
I was running dual boot fine between XP and Vista now im running both Vista it only reads my newly installed drive on boot and i have no boot options as you do in XP/Vista installs, im a newbie to dual drives and was wondering how to set it to have boot options now!
View 5 Replies
View Related
Mar 26, 2008
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
View 5 Replies
View Related
Apr 10, 2009
I once read a post about a boot menu reappearing on every boot. Did a seach on google and found as the 10th result the post I needed (i recognised the text in the preview shown). Search on google 'site:www.microsoft.com boot menu'Found:But......that thread no longer exists. Also I cannot find that post again.With this post result? With a boot menu reappearing?
View 4 Replies
View Related
Feb 6, 2009
I have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies
View Related
Jul 29, 2009
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies
View Related
Jun 6, 2008
I bought a new pc for my work which has all the bells and whistles. Of course the kids want access to the pc so that they can play the latest games. I prefer not to install any games on the pc. I have a couple of
licenses for both Vista Ultimate and XP Pro. Is there any way to install either Vista or XP on a USB drive and install their games on that. When they want to play, they can just boot their drive off USB, making use of the hardware on my pc?
View 9 Replies
View Related
May 1, 2008
We just bought 2 Toshiba Satellites A200, both run Vista Home Premium. Now one does not boot. Some of the screen messages read:
"Windows Error Recovery"
"Windows failed to start."
"Launch repair (recommended)"
When we click Launch repair the screen goes to Windows Boot Manager and it reads:
"Windows has encountered a problem communicating with a device connected to
your computer.
This error can be caused by unplugging a removable storage device such as an external usb drive while the device is in use, or by faulty hardware such as a hard drive or cd-rom drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.......
View 5 Replies
View Related
Jul 26, 2009
I've been trying to install First Defense-ISR Rescue on this computer and it won't install, it gets a -11 code and quits. The code means This means the boot sector is not a standard Windows boot sector. I have Windows Vista Home Premium 64 bit. My question is, if I remove the Recovery Partition D will this change the boot sector. I have factory backup DVD's and made my own DVD's, plus I have a TI image of the drive so I'm OK in that department.
View 4 Replies
View Related
May 29, 2008
With my PC I do have 2 internal DVD/CD-ROM and another external via USB. All 3 disappeared from "My Computer" and from "Disc Manager" and I am now unable to use anyone of them. But in "Device Manager" they are shown with a yellow mark and a "!". If I uninstall anyone of them and reboot it will appear again in "Device Manager" with that mark. If I try to update its controller the Windows search Internet and a message says that best controller for it is already installed. But it is still not appearing in My Computer. All other hardware and programs are working OK including external storage, printer and scanner.
View 8 Replies
View Related
