Slow To Re-establish The Network After Wake From Sleep?
Mar 23, 2008
If you put your Vista PC (I'm on a laptop) to sleep, then wake it, and (right after it wakes) try to visit a Web site -- does it take a little while before that works for you? With XP / Win200 I can immediately get online after it wakes, but with Vista I have to wait -- so I'm curious to know if others have the same problem, or if there's something funky about my setup. So, if you have a sec -- it would be great if you might put yours to sleep, wake it, and then try to visit a site -- does that work right away for you, or do you have to wait too?
View 9 Replies
ADVERTISEMENT
May 31, 2008
I can not stand 8800GT's 100% fan noice , so I order AC S1 (Rev2) heatsink to replace old one, replcace is good, the noice is down, and also control the temp to 43 degree, then the story comes: I find VISTA Home P 64 SP1 Can Sleep , but when I try to wake up , the PC , CPU(Fan), Hardisk , VedioCard fan start working , but the LCD have no signal, and Wireless Keybord and mouse does not work . I reinstall chip (MB)drivers and vedio card drivers ...still same problem. I change DELL 2407 to Philips 190P stll no siginal...
I change BIOS From S3 to S1 , yes, it can wake up, but I need S3 !!! I check the Device Manger, and find SYSTEM DEVICES -> PCI Bus Properties general say working properly, BUT resources menory range conflicts pls. see the picsorry it is Chinese ) :Powercfg /a says system support S3: I am sorry my OS is Chinese, but I can NOT find answer from China, pls. help, if you guys need transfer into English, just let me know!one more pic from DMF
View 5 Replies
View Related
Mar 29, 2009
Can someone tell me how to Wake my computer from Sleep Mode? When my computer goes into Sleep Mode, I can't wake it by hitting a key on the keyboard or by moving my mouse (like in XP). I have to push the power button on the computer. I've done some searches for the problem here and on Google but still can't find a good answer.
View 9 Replies
View Related
Jun 29, 2008
I have a ACER Aspire desktop. I bought it in Jan and sometime in April, it began hanging coming out of sleep. I read that MS had released a hotfix to solve this issue. Since SP1 is supposed to contain all the hotfixes, I did a full system restore updated all drivers and MS updates using windows update then windows update showed me the SP1 update and I updated my vista home premium to SP1.
The system still hangs while coming out of sleep. Sometimes it hangs after 30 minutes and sometimes 12 hours, it is very intermittent. Acer says it is a MS issue and MS has not been able to pinpoint what is causing the issue. They have me disable various things and sleep and wake up the PC after 3 mins. How does that help? It has hung even when only Kaspersky Int Sec and Vista sidebar were the only two startup items running.
View 4 Replies
View Related
Feb 24, 2009
So, I have the X-Fi XtremeGamer sound card, and I've never had any problems with my sound. Nothing has ever acted up or anything. I've recently tore my system down, and put it back together. and now for some reason my sound is acting up. It still works, but not all the time. Also my Internet is acting up the same way also. so, everything was all good. and after rebuild Now when I put the system to sleep, when I wake it up I get a Windows message saying something about Windows something didn't respond. and my volume symbol in system tray is X'd Out. I have no sound. but if I wait about 20-30 seconds it just turns on all of a sudden, like the X-Fi is waking up slower than the computer is. But this has never happened in the past. So it works, but it's delayed. Same thing with my Internet, it's never had a problem. but now when I wake system up from sleep mode, the net doesn't work. and I hoped it would turn on like the sound does, but it doesn't. So I have to either Restart PC, or I can unplug, and replug in the Ethernet cable. then it works fine. I'm not sure why both of these items are acting up, but they have never done this is the past. Does anyone know why either of these things would be happening?
View 6 Replies
View Related
Mar 2, 2010
Just started two days ago, when my computer goes to sleep it has issues waking up. When I wake it up,my icons, my start menu and toolbar icons don't work until I restart it. Nothing works, but everything looks fine when looking at it. Any clues?
View 6 Replies
View Related
Feb 17, 2009
I pressed the circle button with the vertical lline in Vista (from pressing Start) This sent the computer to sleep or hibanate I dont know which. I cannot get the computer to come back on. The monitor remains black (no picture) and says no signal. I have deprived the computer of power. This was achieved by unplugging it from the wall, and removing the power cable also from the computer.
I have tried restarting the computer but to no avail. I have also removed the keyboard and mouse when I try starting up. I have also tried, holding in the power button and then restarting. No matter what I try still no joy. No signal on the monitor. The lights in all cases come on, on the base unit and I can hear fans spinning etc. I have read about this issue in round about ways but all of the fixes seem to rely on actually being in windows.
View 7 Replies
View Related
Apr 18, 2009
Running Vista 32 Bit Home Prem on Desktop and Laptop. My Home Network has Wireless Router...Desktop is hard wired to Router, Laptop is wireless. Recently configured Network to let me share Printer connected to Desktop via USB connection. The Desktop is set to sleep after 60 mins. What I didn't realize is when Desktop goes to Sleep the Network doesn't see it, and, trying to print from the Laptop to the shared printer will not work. Is there away given the configuration of my Home Network that I can Wake the Desktop from my Laptop when I want to Print from the Laptop when the Desktop has gone to Sleep? I realize I could just not let the Desktop to go into Sleep....but that defeats the Power saving feature which is important to me.
View 6 Replies
View Related
Oct 7, 2009
I have several notebooks with Windows Vista Business 32 installed. After wakeup from sleeping mode, is necessary to reset network adapter to get to the internet. Otherwise only local network is reachable. I disabled power off of network adapter during sleep mode, Disabled IP6. I tried to install KB933872 but installation end because KB is not for my operating system.
View 7 Replies
View Related
Feb 22, 2009
I have recently starting to have an annoying problem with the sleep mode.
Almost every time I use it, it shut down and then 3-5 seconds later, it "wakes up".
Anyone got any idea what could be going on?
View 7 Replies
View Related
Jan 21, 2010
Would using sleep mode often cause a slow down? I don't want my computer to be noticeably slower. I have vista ult. 3 gig ram, 9800 GTX, Intel e6400.
also how can I make a shortcut for sleep...like win key+s for example.
View 9 Replies
View Related
Mar 23, 2008
when my laptop goes to sleep, the network connection is lost, is there any way i can stop i from doing this so that i still have access to my home network when it is in sleep mode.
View 9 Replies
View Related
Mar 23, 2008
1. My network has ALWAYS failed upon RESUME FROM SLEEP using a WIRELESS connection via a NETGEAR WN121T wireless-N USB 2.0 adapter, but NOT when using a wired Ethernet connection.
2. It also works perfectly from BOOT via the WN121T wireless connection with my NETGEAR DG834N draft 802.11n (and another 802.11g) wireless modem/router on Windows Vista Ultimate, both with and without the SP1 Release Candidate.
3. But upon resumption from SLEEP, the wireless n/w connection has ALWAYS failed: attempting to re-connect to the network fails, and Device Manager reports for the WN121T that ???Windows has stopped this device because it has reported problems (code 43)???.
4. The only remedy is to REBOOT.
5. The consequences of this are twofold:.........
View 9 Replies
View Related
May 26, 2009
I am running vista home premium on a dell 530 and have just had to restore factory settings due to my user account being corrupted. I have reinstalled all my software and now have realised that it is doing what It has done before in the five months I have had it (after restore to factory settings) which is waking from sleep on it's own. I did find a solution to this on a forum which is to go to device manager / network adapter / intel.... / properties / power management / wake from LAN and uncheck the first two settings "wake on directed packet" and "wake on magic packet". Now as this solves the problem I am confused as to why my "factory settings" have it checked???? Now, immediately after closing the properties window I got a dialogue box saying that a new private network has been detected with a highlighted option to call it local network2... this freaked me out as I have not connected anything to even remotely act as another network and further more there was an ip address in the bar at the top of the dialogue box which I noted (169.254.175.32/255.255.0.0) I would just like to know if this is behaviour of a virus of some sort or something normal beyond my understanding.
View 4 Replies
View Related
Apr 11, 2008
Since installing SP1 I can't establish a broadband (DSL) connection after coming out of Sleep mode. Even if I log off and back on I still can't connect. I've tried disconnecting before going into sleep, but that hasn't worked. Diagnostics finds no problems and my power options are unchanged. I must either reboot or go into hibernation mode to get the connection back. There are no issues when I use hibernate. I've searched around and found no solutions,
View 6 Replies
View Related
Dec 2, 2009
I got this message when i tried to view any website. I looked for a solution all over the internet. I tried everything suggested and nothing worked so I just started messing around. Here is what finaly fixed it. Click Tools, internet options, connections, LAN settings, uncheck use a proxy server for you LAN
View 0 Replies
View Related
Jul 5, 2008
I would like to establish a password for my windows mail so that if my laptop is left unattended my email is secure. Is there a way for windows mail to prompt for a password before displaying my email?
View 9 Replies
View Related
Mar 30, 2009
New touch screen, and, of coursel, wanted to establish my e-mail. Put in the wrong info. Now I need to change it. How do I do it?
View 4 Replies
View Related
Apr 24, 2008
The other day IE 7 was running very slow. It took over 10 minutes to load a web page. I only found out the it would actually load the web site because I left I IE running while I used another computer to search the web of answers. whe I returned the web page was loaded. But if I tried to click on anything on the page it would not load for a long time. I thought that the network was not functioning. But I was able to install the current updates with no problems. The antivirus updates worked normally. I could ping www.excite.com or www.usatoday.com with no problems.
I also noticed that the antivirus program would hang and not start scanning the memory. If I used task manager to end the process it would cause the antivirus process to go to the next step and I could tell it to scan the disk drives. But it would never start. I tried to reboot but had the same problem. I finally rebooted into safe mode with the network. At this point the network worked and the antivirus also worked. I did a virus scan and it found nothing. I then rebooted the system and now everything seems to be working.
View 7 Replies
View Related
Mar 23, 2008
Everything seems fine except that the network downloads seem terribly slow. On my XP laptop using the same connection, speeds are at around 1000 kbps. On Vista download speeds are more like 100kbps even though uploads are at 800kbps. I have tried updating drivers, disabling auto-tuning, etc. I don't have any anti-virus s/w like Mcafee or Norton. Vista's network diaganostics doesn't seem to detect any problem, but did change TCP/IP MTU settings.
View 6 Replies
View Related
May 9, 2008
Everytime i boot my pc, my network is listed as "identifying" for about a minute, is there a way to make my pc remember instead of having to do it everytime i boot up, im sure when i first installed vista, it didnt last as long. Also, this happens when resuming from sleep, but after about 30 seconds disconnects completely for another 30. Im thinking that when i killed some services, one has caused vista to start doing this
View 8 Replies
View Related
Apr 10, 2008
I have a desktop dual boot with XP and VistaSP1 and a laptop with XP, when I move files from XP to XP via network the speed os fast. when I move files from XP to Vista and vise versus, the speed is half to one third of when Im runing XP. Why is this and how can I fix it. I have tried disabling firewalls and antivirus on both machines with no effect.
View 4 Replies
View Related
Mar 6, 2009
I am very PC-Challenged when it comes to Networking & Internet and I have 2 problems at the office that you may be able to help me with. We have a small business package from AT&T (used to be bellsouth), one of those lines if a dedicated ADSL broadband, each line has a filter and we also have a Netopia ADSL router (motorola 3347-02-1006L) + linksys Gigabit 8 port switch.
There is 1 server (Windows 2000 Server OS w/SP4) and 3 workstations running XP Pro w/SP3 (2GB's of Ram all up to date with drivers and MS updates... I make sure of that). The server sits very close to my workstation as I have a KVM switch to adjust or make changes on it and to utilize only 1 monitor + kb/mouse. This is the first issue we have: (Gibabit Ethernet adapters on workstations)
One of my partners claims that if my computer is off, the software we use to sell our products runs very fast on his computer but, as soon as I turn on my workstation and I load the software, his speeds show significant downtime (slowness?). Again, not being very knowledgeable at networking I find this to be annoying but illogical at the same time
View 9 Replies
View Related
Dec 18, 2008
my startups have recently slowed down. I have disabled stuff from the startup selection, and still had no luck. I think the problem lies with the network connection. It seems to be taking a while before it connects to my router. not sure why this started happening usually used to be alot quicker.
View 8 Replies
View Related
Nov 24, 2007
Just wanted to know if anyone else is having this trouble. I have a NDAS network media player, my speed sending files to the drive are 4.1 mb/sec. Copying files from the drive to the computer is 10.1 mb/sec. I have tried every patch or fix I can find. Nothing works.
Vista ultimate 32
Belkin N1 router
Asus P5N-E SLT
View 6 Replies
View Related
Mar 23, 2008
I support about 200 XP users and, now, about 8 Vista Business users on our 2003 AD network. 100% of the Vista clients are unacceptably slow accessing/copying/moving files from shares on the network. Even opening a network drive pauses for 30 secs. to as much as 2 minutes to populate the window with the file and folder names, whereas this is instant with XP clients.
View 4 Replies
View Related
Mar 30, 2008
I have an 10/100 wired connection through a linksys router to an XBOX 360 and am running Windows Vista Home Premium SP1. I've had ZERO succuss in playing MCE content - ie MP3s and viewing JPGs - on the XBox.
The Media Center menus on the Xbox are intolerably slow, taking 5-30 seconds to respond. Eventually if I have the patience to wait until the XBOX Media center accesses the files located on the Vista machine it takes upwards of 2 minutes just to load one jpg. When I run the tune network tool in WMC I get a message saying that:
"Your network may not have enough bandwidth for consistent performance on your extender device."
When I view the performance graph in the tool my bandwith barely registers on the graph.
Other things I have tried to no avail:
- turned off all firewalls
- unitstalled anti-virus software
- port forwarded the following ports in the router, TCP2869, TCP10243,
UDP1900, UDP10280 to UDP10284
- played with the flow control settings
- tried selecting all possible "speed & duplex" settings
Support from Microsoft sucks:mad:. The XBox people have pawned me off on the Vista support people. I wouldn't let the Vista support people hand me back to the XBox people...although they tried pretty hard. The Vista support people are saying they need to recreate the problem in their lab and get back to me.
View 9 Replies
View Related
Jul 2, 2008
I originally posted this 6-24 on only the Vista Printer_fax_scan NG with no response. Multiposted now to broaden the range of people seeing the post. Really need assistance. TIA.
I have a laptop (new HP) with Vista Home Premium SP1 preinstalled, 3 GB RAM,250GB HDD, AMD Turion 64 processor. Using Zone Alarm free as firewall and AVG 8 free as antivirus. Know that firewall is not issue since have full access to printers (can ping the network connected printers) and all other networked computers without problem. I understand that AVG has had a printing issue in the past but I totally turned off AVG by uninstalling itand this did not clear the issue with printing.
Out of the box I have connected the new laptop to the following printers using the latest drivers available from the manufacturers or using Vista's built in if the drivers aren't available from manufacturer's web site.
The following are connected through the home network via wireless and work flawlessly with 3 laptops running XP Pro (2) and XP Home (1).HP 2200DN - B & W Laser (network with Cat5e cable through WAP/Switch) OKIDATA 5150 - Color laser (network with Cat5e cable through WAP/Switch)Epson 1280 (connected through a Sony XP computer share) Epson R260 (also connected through the Sony XP computer)
The last printer is a Canon BJC80 which is connected via a USB to Parallel printer cable (Belkin) which works great with no delay on any of the laptops running XP.
View 9 Replies
View Related
Jun 9, 2008
I am connected to the network using a wired connection and have the same workgroup name as the XP machines on the network. My files are stored on an XP machine that is used almost exclusively for this purpose - we call this the 'server'. I also run a couple of programs remotely from that machine, notably my mail program (Pegasus Mail).
on this Vista machine for a reason that I cannot fathom I am having a very slow connection to the files on the XP machine on the network. (Other XP machines on the network have no trouble accessing these same files quickly and effortlessly, though they are much older rickety machines by comparison with this one.) Some of these files are on the 'server' machine itself (on a Raid 5 system) others are on a Mybook external hard drive which I have removed from this Vista machine and connected to the XP one - in case this was causing the problems. I am not able to access my email program except painfully slowly and with frequent crashes or messages of 'not responding' though eventually the program catches itself and recovers. But obviously this is not workable.
I have tried to remove all sorts of devices in case they have suddenly caused conflicts (webcam, removed the Mybook from my own computer etc.). also replaced the network cable. I have also reset the router and restarted the computer. After reading a post on here I have also disabled the IpV6 on this. not able to access them using programs such as Breezebrowser or Photoshop Bridge.
View 6 Replies
View Related
Oct 5, 2009
I am going to sound like a real big rookie, well because I am. My portable computer is for business use only. I seem to never use the battery as I am always plugged in somewhere. It seems like if I have a long update on a slower connection like anti-virus or windows update the computer shuts down after awhile. I am thinking these updates are not finishing. I would be working on my business and my connection would be very very slow. They suddenly it would spead up to a good usable speed. I noticed that after I got a message that an update had finally finished that matched me finally being able to work. I want to know how to keep Vista from shutting down and allow updates and downloads to complete while I am asleep so when I am at the computer I can work. I have a ton to learn.
View 4 Replies
View Related
May 15, 2009
Dell Studio Laptop running Windows Vista Home Premium. Home wired & wireless network with Wireless N D-Link router, Netgear ReadyNAS duo wired to router, PS3 game console connected to router. I only use wireless from my laptop. When I try to move files around on the NAS using windows explorer, I can't seem to browse the NAS' content for more than a few minutes, then explorer locks up or enters a mode where it keeps refreshing the view of the network directory and doesn't allow basic file operations like right-clicking on a file to get its properties.
I can't get more than 1 Mbps of transfer speed with Robocopy out of the NAS. I have some video files on the NAS unit. Double clicking on any video to play it in Media Player is the worst thing to do - WMP doesn't manage to download enough data to buffer it and never allows to be shut down. I prevents Windows from shutting down cleanly. I made sure I had the latest drivers for the wireless adapter.
View 4 Replies
View Related
