Everytime i boot my pc, my network is listed as "identifying" for about a minute, is there a way to make my pc remember instead of having to do it everytime i boot up, im sure when i first installed vista, it didnt last as long. Also, this happens when resuming from sleep, but after about 30 seconds disconnects completely for another 30. Im thinking that when i killed some services, one has caused vista to start doing this
View 8 Repliesi've set my laptop to auto-connect to a wireless network, but it'll ask for identification because it's a secure network. is it possible to automate the filling process too, so that i don't have to type everytime? i have to enter my username, password and another field which i can't rem. >.< there is a check box on the prompt pop up screen which says that the above information can be saved when checked, but it's greyed out, so i couldn't check it.
View 8 Replies View RelatedThe other day IE 7 was running very slow. It took over 10 minutes to load a web page. I only found out the it would actually load the web site because I left I IE running while I used another computer to search the web of answers. whe I returned the web page was loaded. But if I tried to click on anything on the page it would not load for a long time. I thought that the network was not functioning. But I was able to install the current updates with no problems. The antivirus updates worked normally. I could ping www.excite.com or www.usatoday.com with no problems.
I also noticed that the antivirus program would hang and not start scanning the memory. If I used task manager to end the process it would cause the antivirus process to go to the next step and I could tell it to scan the disk drives. But it would never start. I tried to reboot but had the same problem. I finally rebooted into safe mode with the network. At this point the network worked and the antivirus also worked. I did a virus scan and it found nothing. I then rebooted the system and now everything seems to be working.
Everything seems fine except that the network downloads seem terribly slow. On my XP laptop using the same connection, speeds are at around 1000 kbps. On Vista download speeds are more like 100kbps even though uploads are at 800kbps. I have tried updating drivers, disabling auto-tuning, etc. I don't have any anti-virus s/w like Mcafee or Norton. Vista's network diaganostics doesn't seem to detect any problem, but did change TCP/IP MTU settings.
View 6 Replies View RelatedI have a desktop dual boot with XP and VistaSP1 and a laptop with XP, when I move files from XP to XP via network the speed os fast. when I move files from XP to Vista and vise versus, the speed is half to one third of when Im runing XP. Why is this and how can I fix it. I have tried disabling firewalls and antivirus on both machines with no effect.
View 4 Replies View RelatedI am very PC-Challenged when it comes to Networking & Internet and I have 2 problems at the office that you may be able to help me with. We have a small business package from AT&T (used to be bellsouth), one of those lines if a dedicated ADSL broadband, each line has a filter and we also have a Netopia ADSL router (motorola 3347-02-1006L) + linksys Gigabit 8 port switch.
There is 1 server (Windows 2000 Server OS w/SP4) and 3 workstations running XP Pro w/SP3 (2GB's of Ram all up to date with drivers and MS updates... I make sure of that). The server sits very close to my workstation as I have a KVM switch to adjust or make changes on it and to utilize only 1 monitor + kb/mouse. This is the first issue we have: (Gibabit Ethernet adapters on workstations)
One of my partners claims that if my computer is off, the software we use to sell our products runs very fast on his computer but, as soon as I turn on my workstation and I load the software, his speeds show significant downtime (slowness?). Again, not being very knowledgeable at networking I find this to be annoying but illogical at the same time
my startups have recently slowed down. I have disabled stuff from the startup selection, and still had no luck. I think the problem lies with the network connection. It seems to be taking a while before it connects to my router. not sure why this started happening usually used to be alot quicker.
View 8 Replies View RelatedJust wanted to know if anyone else is having this trouble. I have a NDAS network media player, my speed sending files to the drive are 4.1 mb/sec. Copying files from the drive to the computer is 10.1 mb/sec. I have tried every patch or fix I can find. Nothing works.
Vista ultimate 32
Belkin N1 router
Asus P5N-E SLT
I support about 200 XP users and, now, about 8 Vista Business users on our 2003 AD network. 100% of the Vista clients are unacceptably slow accessing/copying/moving files from shares on the network. Even opening a network drive pauses for 30 secs. to as much as 2 minutes to populate the window with the file and folder names, whereas this is instant with XP clients.
View 4 Replies View RelatedI have an 10/100 wired connection through a linksys router to an XBOX 360 and am running Windows Vista Home Premium SP1. I've had ZERO succuss in playing MCE content - ie MP3s and viewing JPGs - on the XBox.
The Media Center menus on the Xbox are intolerably slow, taking 5-30 seconds to respond. Eventually if I have the patience to wait until the XBOX Media center accesses the files located on the Vista machine it takes upwards of 2 minutes just to load one jpg. When I run the tune network tool in WMC I get a message saying that:
"Your network may not have enough bandwidth for consistent performance on your extender device."
When I view the performance graph in the tool my bandwith barely registers on the graph.
Other things I have tried to no avail:
- turned off all firewalls
- unitstalled anti-virus software
- port forwarded the following ports in the router, TCP2869, TCP10243,
UDP1900, UDP10280 to UDP10284
- played with the flow control settings
- tried selecting all possible "speed & duplex" settings
Support from Microsoft sucks:mad:. The XBox people have pawned me off on the Vista support people. I wouldn't let the Vista support people hand me back to the XBox people...although they tried pretty hard. The Vista support people are saying they need to recreate the problem in their lab and get back to me.
If you put your Vista PC (I'm on a laptop) to sleep, then wake it, and (right after it wakes) try to visit a Web site -- does it take a little while before that works for you? With XP / Win200 I can immediately get online after it wakes, but with Vista I have to wait -- so I'm curious to know if others have the same problem, or if there's something funky about my setup. So, if you have a sec -- it would be great if you might put yours to sleep, wake it, and then try to visit a site -- does that work right away for you, or do you have to wait too?
View 9 Replies View RelatedI originally posted this 6-24 on only the Vista Printer_fax_scan NG with no response. Multiposted now to broaden the range of people seeing the post. Really need assistance. TIA.
I have a laptop (new HP) with Vista Home Premium SP1 preinstalled, 3 GB RAM,250GB HDD, AMD Turion 64 processor. Using Zone Alarm free as firewall and AVG 8 free as antivirus. Know that firewall is not issue since have full access to printers (can ping the network connected printers) and all other networked computers without problem. I understand that AVG has had a printing issue in the past but I totally turned off AVG by uninstalling itand this did not clear the issue with printing.
Out of the box I have connected the new laptop to the following printers using the latest drivers available from the manufacturers or using Vista's built in if the drivers aren't available from manufacturer's web site.
The following are connected through the home network via wireless and work flawlessly with 3 laptops running XP Pro (2) and XP Home (1).HP 2200DN - B & W Laser (network with Cat5e cable through WAP/Switch) OKIDATA 5150 - Color laser (network with Cat5e cable through WAP/Switch)Epson 1280 (connected through a Sony XP computer share) Epson R260 (also connected through the Sony XP computer)
The last printer is a Canon BJC80 which is connected via a USB to Parallel printer cable (Belkin) which works great with no delay on any of the laptops running XP.
I am connected to the network using a wired connection and have the same workgroup name as the XP machines on the network. My files are stored on an XP machine that is used almost exclusively for this purpose - we call this the 'server'. I also run a couple of programs remotely from that machine, notably my mail program (Pegasus Mail).
on this Vista machine for a reason that I cannot fathom I am having a very slow connection to the files on the XP machine on the network. (Other XP machines on the network have no trouble accessing these same files quickly and effortlessly, though they are much older rickety machines by comparison with this one.) Some of these files are on the 'server' machine itself (on a Raid 5 system) others are on a Mybook external hard drive which I have removed from this Vista machine and connected to the XP one - in case this was causing the problems. I am not able to access my email program except painfully slowly and with frequent crashes or messages of 'not responding' though eventually the program catches itself and recovers. But obviously this is not workable.
I have tried to remove all sorts of devices in case they have suddenly caused conflicts (webcam, removed the Mybook from my own computer etc.). also replaced the network cable. I have also reset the router and restarted the computer. After reading a post on here I have also disabled the IpV6 on this. not able to access them using programs such as Breezebrowser or Photoshop Bridge.
I am going to sound like a real big rookie, well because I am. My portable computer is for business use only. I seem to never use the battery as I am always plugged in somewhere. It seems like if I have a long update on a slower connection like anti-virus or windows update the computer shuts down after awhile. I am thinking these updates are not finishing. I would be working on my business and my connection would be very very slow. They suddenly it would spead up to a good usable speed. I noticed that after I got a message that an update had finally finished that matched me finally being able to work. I want to know how to keep Vista from shutting down and allow updates and downloads to complete while I am asleep so when I am at the computer I can work. I have a ton to learn.
View 4 Replies View RelatedDell Studio Laptop running Windows Vista Home Premium. Home wired & wireless network with Wireless N D-Link router, Netgear ReadyNAS duo wired to router, PS3 game console connected to router. I only use wireless from my laptop. When I try to move files around on the NAS using windows explorer, I can't seem to browse the NAS' content for more than a few minutes, then explorer locks up or enters a mode where it keeps refreshing the view of the network directory and doesn't allow basic file operations like right-clicking on a file to get its properties.
I can't get more than 1 Mbps of transfer speed with Robocopy out of the NAS. I have some video files on the NAS unit. Double clicking on any video to play it in Media Player is the worst thing to do - WMP doesn't manage to download enough data to buffer it and never allows to be shut down. I prevents Windows from shutting down cleanly. I made sure I had the latest drivers for the wireless adapter.
I have two Laptops an Acer & Fujitsu siemens both use an atheros network adapterto connect wirelessly to my Belkin router. The laptops are similar in spec however the acer connects to my Belkin router with excellent speed (streaming content perfectly), my fujitsu connects but is extremely slow (Streaming is unwatchable). The connection strength is excellent on both machines. Both laptops are in the same room. I have spoken to Fujitsu who state there is no problem with the network adapter as the signal strength is excellent, it must be a software conflict.
View 4 Replies View RelatedI have Vista x64 and I have read threads on this for weeks and can't fix it. I have file sharing/network discovery on, private network, password protection disabled, my shares set to everyone and everyone is on the same workgroup. My problem is that the x64 Vista computer will not see any of the XP (x86 or x64) computers and they can't see it from the Network Neighbourhood. However, if I type the IP address of the XP computers I
can access them. On the XP computers if I type the IP address I get an error that it isn't accessable and I might not have permission. However, if I type \192.168.0.100share or any of the other share names I access it just fine. pinging works too by IP but not by name. If I boot into the x86 install of have of Vista I can access XP computers from Vista and the Vista from XP by name and everything without typing any user names. The only differince between the two aside from x64 and x86 is that x86 isn't patched past SP1 as I don't use it often. Lastly after installing that XP patch I can see the x86 XP computers by name from the network map feature on Vista, still can't access them by name though...
I'm using Vista Home Premium and Windows Update tells me I'm up to date.
Every so often the Network icon in the System Tray tells me that it is not connected to a Network (by displaying a red X) though I can clearly see that I am.
I'm trying to network my new Optiplex 740 with Vista Business (32bit), and Norton 360, to my old Euro PC with W2K Pro. and SystemWorks, using basic Belkin /Realtek cards and yellow ethernet cable. My broadband connection is through my old machine and works perfectly, as does the network card installation.
My new machine also indicates that its card is correctly installed and functioning correctly. BUT the Network and Sharing Center window shows this computer as linked to an Unidentified network and no connection to either the other computer or broadband connection.........
I have bought DD a laptop for Christmas and thought I'd get it all set up beforehand. I already have a wireless network here at home, with 2 desktops running xp) and a macbook, they connect via a belkin wireless modem router. Vista however, doesn't even find a network, I get a message saying the network cable is nplugged. Its wireless enabled and the switch is on
View 9 Replies View RelatedOne usb ethernet adapter for internet connection through an old router, one for a Linksys Wireless G router hard wired to remote security cameras sums up the problem where one cancels the other out. This is a problem for XP, Vista, and even 7 beta while the primary system still runs XP. The dsl connection is through an old dsl setup using a usb adapter while the Linksys pci adapter card or usb adapter once installed becomes the default network adapter.
The wireless router itself is plugged with the RJ-45 ethernet adapter directly into the main controller/dvr box for live wireless feed to the main XP system or this one as a second means along with direct plug in to a tv set in the room where the main box is located. In XP, Vista, and even the later 7 beta the same problem of running two adapters without conflict is the main question needing a working solution. This thread is intended to tax the most network familar people here.
The landlord runs the main XP system with eventual plans to upgrade to Vista while this system serves as a testing machine a good deal of the time explaining multiple OSs as a rule. The router and adapters are in working order not seeing any defects while canceling the original dsl adapter out when installed. That takes out the online connection in the process.
Bought a Freecom Network Drive (LINK) from PC World today and got it set up and it seemed to be working fine on my Vista computer until I tryed to get it set up on my XP computer. It seemed to get setup ok but then the whole thing just stopped working. The hard drive spines and it works fine when plugged in as USB device but when trying to connect it to the network it simply does not show up. I have a Belkin G+MIMO Router and the Network Hard Drive is a Freecom Network Storage Hard Drive 250GB
Just returned from holiday and while we were away I changed my laptop network in vista from private to public as advised and the internet worked fine. Now at home I can’t connect to my router, and I get a message saying that the details held on the computer is not the same as the router. Also there is no “customise” function being shown on the network and sharing centre screen to switch back to private network. I’ve tried everything to set up a connection, even a new one, but the same message appears all the time.
View 7 Replies View RelatedCan I set up network of two computers with Windows Server 2008 and Windows Vista Home Basic with FireWire? How both systems will detect connection of two computers with FireWire cable? Does that connection make possible file exchange?
View 6 Replies View RelatedProblem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
ok so this problem has been going on for awhile now but has gotten worse somehow... before i could not access my vista computer upstairs from my xp computer downstairs. i've made sure the settings are what they should be on the vista computer since i can easily access my xp computer from the vista computer. now the problem has gotten worse by that i can't access my xp computer from the vista computer or vice versa so now i can't transfer files from each computer. i need to use my external drive or a flash drive.
View 9 Replies View RelatedI just bought a new laptop a Dell XPS 1330, with Vista. And it is slow in launching everything. Once I'm in a program, it's usually okay, but it takes 5-10 seconds just to open the start menu, or switch between programs, or open a program is more like 20-30 seconds. It's even slower if I'm coming out of sleep mode, it never gets faster, I always have to boot even though I see nothing in the task manager. Is this the way it is supposed to be, and if not, how can I tell if this is a Vista problem or the laptop? My cpu runs at about 3% capacity and my ram is around 50 when no applications are open.
View 9 Replies View RelatedMy Vista x64 Ultimate was fast at first, but now after around 6months it has been slower. I have cleaned all Vista components and uninstalled unnecessary softwares/games. My HDD has 70% space remaining and its defragged. I have fast AVG antivirus and when I try to open a new folder, let's say my documents folder, it opens it fast but its all blank white and it keeps loading for like 3-5 seconds and then the contents show up. What's wrong? I expect an immediately folder content showing up especially when I have 3.55 GHz quad core and 8800 GTX T_T
View 9 Replies View RelatedI have found a solution for slow IE problem, it made my browsing extreamly faster.
Tools-> manage add-ons-> enable or disable add-ons
under enabled section look for "SSVHelperClass"(java plugin add-on) and highlight then click disable button.
Restart IE and you could see the difference.
Since my CPU is 1333, if I install DDR-2 800 rams, my ratio will be 5:4 or something like that.
1. Will my rams slow down to the FSB of the CPU?
2. If yes, what is the point in installing faster rams if they are slowing down to the FSB of the CPU?
3. If there is a benefit, what is it?
4. If rams are faster, do they somehow increase the performance of the graphics cards? (For, both ATI and NVIDIA make use of the system ram Hyper Memory and Turbo Cache)
5. Wouldn't it be effected by CPU's FSB? Lets say you have a DDR-4 graphics card, and your rams are DDR-2 800, rams are slower than the card, and CPU is slower than both of them.
I purchased my system (Laptop, dual core HP Paviolion dv6700) and installed vista home premium in December 2008. In the beginning system's performance was good but now (within 6 months) it starts so slow. What may be the problem.
View 5 Replies View Related