is it possible to compose an email but have my computer send it at a later specified time, maybe out of my Drafts Folder? for example, say i compose an email one evening but don't want the recipients to recieve it until the following morning ~ can i set my computer to somehow automatically send it the next morning?
View 7 RepliesDoes anyone know if WM has a delayed sending option? i.e. can I write and email at 8am and set it to send at 12pm?
View 7 Replies View RelatedRecently one of my hard drives underwent a bizarre process where it decided to revert back to RAW. After 4 days of problem solving I finally fixed the drives but also purchased 2 new/better drives. I run a RAID-0 Striping set-up. I have done every trick in the book to decrease the excess fluff from running in the background of windows vista but I still get delayed loading times. If I right click to attempt to create a folder or something such as that, the circular loading icon appears as it takes 2-3 seconds to open. And it does this with most everything, some things take longer than others.
I only ask what could be the cause of this because this never happened with my former drives or vista for the past year, it only started after the one hard drive crashed and it has done it since the fix and since the installation of the new drives. Everything use to open practically instantaneously....My only assumption is that there is something trying to load but I have tried disabling everything and it still does the same thing.
I've had Vista x64 installed for about 2 full months now and I've recently begun having a **** ton of problems. One being: 187 seconds. What the ****.Before you ask, here are 'my specs Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution:
1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so)
2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu).
3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds.
4. SIT AT COMPLETELY BLACK SCREEN FOR 160 SECONDS.
5. Welcome screen/load Startup apps (takes 10 seconds or so)....
I recently went into Change Date & Time Internet time tab and chose a time standard to connect with. After doing that I went onto the internet and connected with time.nist.gov and checked the time. After that I was no longer able to go into the internet time tab. It tells me that time.nist.gov is the time connection and I can't change it. It tells me I need to have permission to do this as administrator. I am the administrator! What goes here?
View 6 Replies View RelatedI can receive emails, but get the following error when trying to send emails: The connection to the server has failed. Subject '', Account: 'mail.bellsouth.net', Server: 'mail.bellsouth.net', Protocol: SMTP, Port: 25, Secure(SSL): no, Socket Error: 10060, Error Number: 0x800CCC0E I normally send and receive emails all the time using Windows Mail and don't remember ever receiving this message before. I last sent emails successfully yesterday. I have not changed anything on my computer lately. I'm not sure what is causing this problem.
View 4 Replies View RelatedI'm having problems sending emails . how can i fix that.
View 9 Replies View RelatedCan you help me to deal with these error messages when I try to send/receive emails in Windows Mail. My ISP is Sky Broadband if that's relevant. "The connection to the server has failed. Subject 'Fw: News from the National: 1 May', Account: 'mail.onetel.com', Server: 'mail.onetel.com', Protocol: SMTP, Port: 465, Secure(SSL): Yes, Socket Error: 10060, Error Number: 0x800CCC0E"
"The connection to the server has failed. Account: 'mail.onetel.com', Server: 'mail.onetel.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket Error: 10060, Error Number: 0x800CCC0E"
i can receive emails, however when sending them I'm getting an error message re: the server connection.
View 6 Replies View RelatedI can't seem to get the Windows Mail working. When I try to send an email, it states that I have an error with the servers. I used POP3 and SMTP. I just brought a new laptop and wanted to create an acct for Windows Mail. Also is asking for log in information.
View 5 Replies View Relatedwhen I send out messages to multiple addressees I am successful except for sbcglobal.net addressees. I get those back with a mailer demon message. It says host sbcglobal.net is not responding. Is this my problem or theirs.
View 6 Replies View RelatedWindows mail is not downloading from my pop3 account, when I first set it up it worked fine, now the emails are no longer being received, I've checked my email from the website itself so I know I have email to be downloaded. I do not get any error messages. When trying to send an email I get this error.....
The message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was 'kimberlee1977@netzero.com'. Subject 'test', Account: 'netzero.com', Server: 'authsmtp.netzero.com', Protocol: SMTP, Server Response: '450 smtpout02.vgs.untd.com Authentication required', Port: 25, Secure(SSL): No, Server Error: 450, Error Number: 0x800CCC78
I've checked the online documents for setting up my email with windows mail and everything is correct.
When clicking send/recieve i get the emails downloaded off the BTINTERNET POP3 server but to send them it asks for username and password. I type them in but all it does is repeatedl ask for them again and again. I have changed the outgoing STMP to another value provided but still get the same problem. All the settings are as told they should be by the guides given
View 6 Replies View RelatedI've been sending emails just fine for months, but now I get the following message: subject 'test', account ' pop-server.triad.rr.com', server: ' smtp-server.triad.rr.com', protocol: smtp, port 25, secure (SSL): no, error number 0x800ccc15 ISP is Time Warner Cable, Road
View 6 Replies View RelatedI receive the following error message everytime I send emails through my aapt account via Outlook or Windows Mail The rejected e-mail address was 'xxx@xxxx.com.au'. Subject 'Fw: Christmas Wishes.', Account: 'mail.aapt.net.au', Server: 'mail.aapt.net.au', Protocol: SMTP, Server Response: '554 5.7.1 : Client host rejected: (SPM:RAD) User account blocked from sending email due to policy violation -Please contact support', Port: 25, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79
I have used aapt as my Service Provider for a few months. I was using Outlook to send and receive mails. Everything was working as expected. Then one day outlook stopped sending emails but it could receive emails. I contacted aapt and they told me they didn't support outlook only express and there was nothing they could do. So I changed from outlook to Windows mail. I completed the set up which was identical to outlook and again I received the same problem and error message.....
I set up an email account to link my gmail to email. I get the emails just fine but can't send any. This error code appears: The connection to the server has failed. Subject 'small Black tv stand **REDUCED**** - $25 (NW OKC(122nd ', Account: 'imap.gmail.com', Server: 'smtp.gmail.com', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E I haven't downloaded AVG or anything else.
View 4 Replies View Relatedi cant not send email keeps telling me my smtp is wrong address and i have
checked it serveral times
I can receive messages, but none would sent. It was working fine for months, but after I moved to a new location I can send with the Windows Mail. I have 5 ssages in the Outbox and every tiem I send this erros msg. shows up: Your server has unexpectedly terminated the connection.
View 5 Replies View RelatedI have been using Windows mail fine for months, but starting yesterday it is not letting any outgoing message go out. I at first thought it was just a Comcast issue, but the other account i have with a totally seperate provider is not sending either. Here are the error messages:
The connection to the server has failed. Subject 'Re: [brentwoodcamera] Warner Park Hike...', Account: 'mail.comast.net', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
The connection to the server has failed. Subject 'Re: Your new mailing address', Account: 'mail.digitalstars.net', Server: 'mail.digitalstars.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
I am using Vista and windows live mail and microsoft windows mail. With either, when I try to send an email with multiple pictures they are sent one picture at a time and then the far end cannot open them.
View 4 Replies View RelatedI have problems sending group emails I made up 40 or so emails as a group, when I try to send it it rejects it saying one or more reciepients rejected if I take them out it says it again
View 4 Replies View RelatedI have just started having problems sending emails, I am receiving my emails with no problems. I have even added the windows mail to be allowed through the firewall. I don't know if there was a windows update that has caused the problem since I have not had problems like this before. A window pops up stating....your server has unexpectedly terminated the connections. Possible causes for this include server problems, network problems, or longer periods of inactivity. Error number 0x800CCCoF. My internet provides say there is no problem on their end and that it must be a firewall problem.
View 9 Replies View RelatedNo problem sending emails from home, McD's wifi, Starbucks, etc. but can't send from some motels.
View 9 Replies View RelatedWhen Sp3 released to web??
View 4 Replies View RelatedWhenever I try to open any Windows Explorer program like My Computer, Control Panel, Recycle Bin, etc. the window immediately freezes (though nothing else on the PC freezes) and goes into a non-responsive state. If I just do other stuff for about 3-5 minutes the window will eventually open correctly, but this is obviously a problem.
View 9 Replies View RelatedIn August IE8 Beta 2 was released in English, German, Japanese, and Simplified Chinese, and in September Microsoft released support for 21 more languages. Microsoft officially set the deadline for the final version for later this year, and left it at that. We noted in September that, according to the IE8 Beta 2 support page, prerelease versions of IE8 would no longer be supported come November 1, 2008, suggesting that the final version would arrive this month. We've noticed, however, that this date has been recently changed to December 31: Free unlimited installation and usage support is available for Internet Explorer 8 pre-released versions, but only for North America English customers. This support for Internet Explorer 8 pre-released versions is valid until December 31st, 2008. Full Story: IE8 delayed? Microsoft extends support cutoff for IE8 betas
View 9 Replies View RelatedI decide to re-baseline my desktop home system with a fresh install of Windows Vista Ultimate. Everything seemed to install correctly. Vista picked up most of the drivers and I was able to supply the ones it didn???t. After setup and re-boot, I noticed that the desktop/sidebar appears reasonably fast, after which there is a delay of about a minute with some disk activity during which the Network icon in System Tray has a red X. After about a minute or so, there is a great deal of disk activity (the system seems to be paging). The delay continues further until finally the yellow exclamation symbol appears, quickly followed by the globe icon. The system then functions as normal. The delay can be anywhere between 1-3 minutes. My motherboard has 3 network connections; 1 direct connection to my NAS server, 1 to the ADSL modem, 1 wireless.
View 9 Replies View Relatedmeasure the ReBoot-Time (restart time) for our systems. You can see how to here: How to See What Your Boot Up Time is in Vista
Here's my ReBoot-Time:
Running Processes: 41
Started Services: 36
Automatic logon
Is it wise to have more than 1 antispyware program performing real-time protection at one time?
View 9 Replies View RelatedWe are using Dell laptops while travelling or at field offices.
We have to reset the clock and time zone, every time when we get to new
locations. That is quite a hassle. Is there better ways to do this?
I've got an Sony VGN-BX197XP laptop that I've upgraded to Windows Vista Ultimate. Since then I've encountered some strange display-related issues:
1) I could only boot into Aero about 50% of the time. The rest of the time I forced onto the Standard theme with no Aero option. Since installing Vista SP1 I can't get Aero at all.
2) When not running in Aero mode I can't get the Windows Media Player to play video files, nor get a Perfomance Index.
3) If I plug in an external monitor I can't get a picture on the laptop monitor but I *do* get a picture on the external monitor and it runs Aero 100% of the time. It will also play video files and give me a performance index.