It has windows vista, It just beeps and the monitor show this message: VGA Input: no input signal and turn black and then show this message: Monitor going to sleep and turns black. I can't do anything. I am not able to access anything at all. I restarted the pc so many times and while it's rebooting I press f8 f11 etc and not getting anywhere. I don't know waht to do next. My son thinks that he left the pc on sleep mode.
View 8 RepliesI can put the pc to sleep with either the sleep button on the keyboard or the on-screen sleep button but when the pc goes to sleep the keyboard and mouse USB connections go to sleep too. leaving me with no way to wake up the pc! I have tried using Vista 64's built in drivers for the mouse & keyboard and also tried downloading and installing the Microsoft software for the keyboard & mouse. Same problem. the light on the keyboard and mouse both turn off when sleep is utilized. I've tried changing the settings in the Power Options to enable the power button on the pc to turn on sleep instead of shut down. It does put the pc to sleep but when I try to wake the pc from sleep with the power button the pc acts like it was completely shutdown and tries to do a full boot which then results in the windows screen saying it didn't shut down right, "start normally"?
The pc then starts as normal but how do fix the sleep problem? I have no problem with another pc with Vista Ultimate and 2 other pcs with MCE2005 and the sleep status. The problem pc has all the latest Window updates, current bios, latest ATI 64 bit drivers for the graphics card. One possibility might be that the graphics card is designed for the new PCIe 2.0 but the board is the older PCIe standard. The graphics card is supposed to be "backwards compatible" with older PCIe slots but now I wonder if that could be the problem?
i have been trying to put itunes onto my pc and everytime i install and run the itunes program it runs but the whole window is black so you cant see anything. i have tried install 32 bit version and 64 bit version into different program files ie the program (x86) folder and the normal program files folder, neither one works as they both bring up the same problem.
View 7 Replies View RelatedI just got a new laptop with vista a few months ago. Everything ran smoothly until recently when I went to turn it on and got an error message that???s repeated ever since. It shows the black 'vista' page, the screen turns black, and after a while a box pops up reading; 'window error recovery' A recent hardware or software change might be the cause. It suggests I launch startup Repair. However when I do so it says "startup repair cannot repair this computer automatically."
I've tried going into system recovery options and using system restore to a date when it was working correctly, but it seemed to have no effect. I haven???t changed any hardware or software recently, and the only thing plugged into it was the power cord. I'm afraid I'm not very tech savvy, but I don't want to give up on a brand
new computer!
I've just started using sleep mode the past month and recently it hasen't been working correctly, i'm using Vista x64 Ultimate. Most of the time it works fine, but occasionally the computer won't go to sleep and will just sit there doing nothing, the screen is black and nothing happens. The only way to get back into windows is to restart.
I've read everything in the tutorial section and it hasn't helped. I have a Asus maximus formula motherboard (1302 BIOS) and a Nvidia EVGA GTX 285 with 185.85 drivers. I also have a Razer Tarantula keyboard (latest firmware) with a sleep button, which i've been using to put my computer to sleep.
I'm having an issue in which sometimes, I can't get my HP Vista laptop out of sleepmode. It used to only happen once in a blue moon, but now it happens so often that I just don't use sleep mode. I close the lid to get it in sleep mode. When I open the lid, everything lights up as if it's trying to get out of sleep mode, but then it just stops and I have a black screen.
It's gotten to the point where I have to shut down the computer whenever I am not using it. However, it happens about 3 times a week that when I start up the computer, it comes to a black screen in which I see a short blinking white line at the top left corner of my screen. It just keeps blinking for a while (sometimes it lasts for about 30 seconds, sometimes it can last for close to 4 minutes).
I've only just noticed... Since my fresh install of Vista x64, it won't go to sleep anymore. I've tried the Fn shortcut, and clicking Sleep from the Start Menu. When I try to put it to sleep, the screen fades to black (as usual) then after a while, it pops back on to my logon/unlock screen (I have it set to require a password after resuming). It's as though the computer goes to sleep for no time at all, then wakes up almost instantly. It might be something to do with the one missing driver that I can't seem to get hold of (Toshiba don't do x64 for my computer ), the "Firmware Linkage Driver" or something.
View 7 Replies View RelatedI'm so glad i've found these forums, I just recently got a dell inspiron 530, Windows Vista. I recently did a factory restore on my computer and now everytime i put it in sleep mode, it wakes up after a few seconds without me touching it and I want to prevent it from waking up without my command. Also when I view videos in full screen on the internet, I have these two black bars that appear on the left and right of the screen, how can I get that off?
View 4 Replies View Relatedi wanted to shutdown my pc, so i press the red shutdown button in the start menu First odd thing happened: The computer went in some kind of "sleep mode" The screen was black, and my screen went in stand-by mode. The computer did not shut down. Whatever i did, the computer didnt go out of the sleep mode, smashed my keyboard, clicked my mouse, nothing happened. I was in a hurry so i had to shutdown my computer using the power button in my case. I cut off the power, and went away. The next morning, i plug the power back in and i try to start my computer again. The computer started the same way before i shut him down the day before: Fans are running, i dont hear my hard drive running, black screen, screen goes in stand-by mode after a few seconds. No boot menu, nothing immediately a black screeb Very odd, smashed keyboard again and again, pressed every button i could, but nothing happened. Even the leds on my keyboard werent lighted when the pc startsup, mouse does flicker.
Then i had the idea to maybe try and cut power again, and try again after that. So i did as i was thinking, cut the power, reconnected to electricity net, and start up again. This is when another odd thing happens: Everytime i cut power and try restart after reconnecting to power net, the pc goes to black screen fans running, shuts himself down again, and then immediately restarts 1 time. This happens EVERYTIME i cut power. After that he just stays in black screen, nothing happens. Does anyone know what is going on here? Yesterday he worked perfectly, but today he wont even start the bootup screen.
I use vista basic, I've recently had my computer took right back to factory settings as I've been havingso many problems with my lap top, then the registry was sorted out, I know I've not got any virus on the lap top, each time my computer is turned on, I'm told that defender is switched off and I've got to turn it on, I've even tried to start scanning, to see if that would stop it, but it still happens ...
View 4 Replies View RelatedI'm really at the end of my tether with this issue - have a laptop which has windows Vista installed. Whenever I boot up the Windows Firewall is turned on. However, towards the end of the boot process, the Windows Firewall turns itself off, almost as if when a program loads it knocks it out. Is there anyway I can do a walk thru' of the boot up process so I can see if I can capture which program or process is doing it? At my wits end.
View 7 Replies View RelatedI have tried repeatedly to fix my screensaver. It will not even turn on manually by clicking preview. All I get is a black screen for a few seconds and then back to the display options. I have tried different screen savers and none of them work.
View 7 Replies View RelatedThis website cleans your flash player stored stuff.
just wait 3-4seconds for page to load then click delete ...
Using the windows Aero theme with all visual effects on. My computer scores 5.9 across the board (except 5.7 in cpu and hard drive...) in Vista Experince so I should be able to handle everything Vista throws at me. My problem is that Vista turns off the Min/Max animation occasionally and I have no idea why. I can go back in to performance>visual effects and see that its still checked. Clicking apply again will restore the animations.
View 5 Replies View RelatedI recently installed SUSE Linux Enterprise Desktop 10.2 and now when I go into Vista and click the hibernate feature, my screen turns off for about a minute, lights stay on, then my log on screen comes, just as it would if I turned my computer on after hibernation. Also, when GRUB boot loader gives me the OS Choices, how can I set "Windows" as default? Right now, SLED is default.
View 7 Replies View Relatedi have problem with vista sidebar when i open it.. just turns on.. and off.. in a moment ( the same is.. when i turn on the computer) I succeeded to get screenshot..
View 4 Replies View Relateda member of my family has onecare installed, and it keeps telling him that windows firewall is turned off, even though he did nothing
View 4 Replies View RelatedI just bought a Dell studio XPS 1640 about a week ago. It ran perfectly until 2 days ago. Now when I turn on the computer it takes forever. When it finally gets running the HDD light on the case is always on and it runs very slowly. If the computer has been on for several hours the light turns off and it runs fine. But when I restart it does the same thing over again. I thought it might be indexing or something along those lines but didnt know how to find out.
View 4 Replies View RelatedFor about 1-2 years my computer ran fine until recently. Now, whenever I start up my computer it boots all the way to the Vista loading screen, seems as if it loads all the way, then shuts down with no warning. This happens at the same point every time. I tried putting in the Vista DVD and starting that up in an attempt to reinstall or repair Vista, but I get the same results on the same loading screen. The computer is custom built by myself.
Specs:
AMD 64 X2 4800+ 2.4GHZ
ECS GeFORCE 6100SM-M mobo
BFG Nvidia 8800 GTX
OCZ PC6400 2GB 800MHZ (Dual Channel)
Maxtor 160GB 7200 RPM HDD
Coolmax 600W CXI-600B PSU
(Everything is using stock settings)
Flash or the player turns my wireless connection off, if i don't unistall it i can't go online.
View 8 Replies View RelatedWhenever I go into safe mode or run the memory diagnostic, after a few minutes it just turns off by itself. When I go to normal mode it works fine (as in I can have it on for as long as I want and it doesn't turn off). I don't know why it keeps turning off in safe mode.
View 7 Replies View Relatedmy processor is a core 2 duo E4600 @ 2.4Ghz.The problem is that sometimes when i switch my pc on the beeping overheat sound comes and my pc turns off. sometimes when i do manage to turn it on, i use coretemp and speedfan for the temp. reading and in the beginning it reads at 83 degrees celcius! then it cools down and the temp. remains betwwen 65c - 70c. yesterday the nomal temp was between 40c-45c. the sudden increase in its normal temp scared me. this increase happenned after i cleaned and dusted the insides of my pc. while dusting it i didnt do anything near the processor. i have 3 8mm fans in the pc. 1 blowing on the processor and 2 sucking air out-one from the back and one at the side.
View 4 Replies View RelatedI would like to put my wireless mouse in inactive mode during sleep mode. As it is an mouse movement, usually accidental, wakes up the computer. I looked for a way but couldn't find this facility.
View 4 Replies View RelatedI noticed that recently the little speaker icon for the Realtek HD Audio Manager (on the taskbar next to the clock) seems to completely disappear at times. One minute it's there, and then Poof! it's gone. It started a few weeks ago. I would restart the computer, and it would be back, but then later disappear. (I checked everything I could think of, enabling the notification, checking all the boxes in the control panel and in the realtek control panel, making sure it wasn't a "hidden" icon, etc.)
Now it's back, but instead of being white, it's red. I used to be able to right-click on it and the volume slider would appear and I could adjust the volume easily. Now when I right-click on the red icon, I get a list--> Sound Manager, Audio Devices, System Sound Events, etc. but no volume slider like before.
The sound itself works fine--no problem with the speakers--but I just can't figure out what has caused the problem with the icon disappearing and now re-appearing but with a red color.
Any ideas? I just want my volume slider back!
everytime i put my laptop on it tells me that my windows firewall is off etc etc and i have to turn it on manually everytime.
i have vista and avg antivirus and registry mechanic and spybot
im installing AvP 3 and i just cant do it.
apparently for some reason the dvd stops reading...
when i enter "my computer" and try to go into drive d(my dvd) it just crashes,
then i have to wait from a range of 5 mins to 1.5 hours for windows explorer to restart...
and the game installation crashes too...
that happens with other dvds and cds too.
i have changed various dvd drives from various companies and i have updated all of their drivers...the problem is consistent.
im tired of buying new dvd drives and throwing them away for nothing.
obviously its a vista issue cause on my old pc everything works just fine(i have xp on that one).
most of the games i just copy the dvds files on my portable harddrive using my old pc and then do the installations through that harddrive on my current pc...
but this game is a "steam" game and that wont work...
any ideas?
ps:its not a hardware issue,its definately a windows vista issue.
So whenever I turn on the system, after I run a few light aplications, like Internet Explorer or PC Wizard for example, the screen turns dark for 2 seconds, and the error message: "igfx display driver has stopped responding and was successfully recovered" pops up. This may happen once every 30 minutes or even around 5 times in 20 Seconds, resulting in a blue screen of death. The latest driver which is currently installed for the Intel chipset is 15.13.6.64.1908 (7.15.10.1908) which seems to be causing the problems. This driver is also unsigned by microsoft, but is the most current driver to date (pcd5srvc_x64.pkms, igfxcoin_v1908.dll, and igdkmd64.sys comes up as unsigned in sigverif.exe). I uninstall this driver through Hardware Manager, but the current driver then goes down to (6.0.6001.18000). Even though this old driver is stable, my resolution is horrible and websites with picture intensive pages lag and flash like crazy. I've been searching the internet all night with this problem, and this is my last resort for an answer. I don't know what else to do. I can't even find a lower driver version for this chipset on Intel's support page.
View 9 Replies View RelatedI have got a nasty bug on my vista laptop. I have tried just about everything to clean it up but with no luck. When the bug hits, it turns off the shell extension on AVG, disables all the shortcuts on my desktop. ( Turns the icons to a blank page as well as not letting them execute) When I click on the start menu all the "most used" programs are gone. It also disable the shut down option arrow from the start menu. I have avast, AVG, SypBot, SuperAntiSpyware, Windows Defender, Windows Firewall and Hijackthis all have found problems but have not fixed the major issue.
View 9 Replies View RelatedI have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
View 9 Replies View RelatedI have had problems with Vista not sleeping before and had fixed the issue however, i installed a new video card yesterday and now my PC won't sleep again!
I press sleep it goes to sleep, then 2 seconds later it kicks back in and loads up again! The only thing i have changed since it was working was the video card (Geforce 8600GT).
I have done all the standard changes to keyboard/mouse, network adaptor, media sharing etc etc but still no joy!
I've had Vista Home Premium on a new desktop PC for about 6 weeks now. Instead of shutting down most of the time I have set it to sleep. In "Sleep" the fan does not stop running and I doubt the hard drive stops spinning, the light in the front of the computer does not flash but stays on, the keyboard light stays on and the only effect "Sleep" seems to have is make me have toreenter my password. When I do that "wakeup" there is no sound change and I don't think my PC has ever really slept. I've tried all the configurations in Power Options. I have no option to hibernate.
View 9 Replies View Related