Won't Go To Sleep Mode And The Screen Is Black And Nothing Happens
Jun 9, 2009
I've just started using sleep mode the past month and recently it hasen't been working correctly, i'm using Vista x64 Ultimate. Most of the time it works fine, but occasionally the computer won't go to sleep and will just sit there doing nothing, the screen is black and nothing happens. The only way to get back into windows is to restart.
I've read everything in the tutorial section and it hasn't helped. I have a Asus maximus formula motherboard (1302 BIOS) and a Nvidia EVGA GTX 285 with 185.85 drivers. I also have a Razer Tarantula keyboard (latest firmware) with a sleep button, which i've been using to put my computer to sleep.
I'm having an issue in which sometimes, I can't get my HP Vista laptop out of sleepmode. It used to only happen once in a blue moon, but now it happens so often that I just don't use sleep mode. I close the lid to get it in sleep mode. When I open the lid, everything lights up as if it's trying to get out of sleep mode, but then it just stops and I have a black screen.
It's gotten to the point where I have to shut down the computer whenever I am not using it. However, it happens about 3 times a week that when I start up the computer, it comes to a black screen in which I see a short blinking white line at the top left corner of my screen. It just keeps blinking for a while (sometimes it lasts for about 30 seconds, sometimes it can last for close to 4 minutes).
i wanted to shutdown my pc, so i press the red shutdown button in the start menu First odd thing happened: The computer went in some kind of "sleep mode" The screen was black, and my screen went in stand-by mode. The computer did not shut down. Whatever i did, the computer didnt go out of the sleep mode, smashed my keyboard, clicked my mouse, nothing happened. I was in a hurry so i had to shutdown my computer using the power button in my case. I cut off the power, and went away. The next morning, i plug the power back in and i try to start my computer again. The computer started the same way before i shut him down the day before: Fans are running, i dont hear my hard drive running, black screen, screen goes in stand-by mode after a few seconds. No boot menu, nothing immediately a black screeb Very odd, smashed keyboard again and again, pressed every button i could, but nothing happened. Even the leds on my keyboard werent lighted when the pc startsup, mouse does flicker.
Then i had the idea to maybe try and cut power again, and try again after that. So i did as i was thinking, cut the power, reconnected to electricity net, and start up again. This is when another odd thing happens: Everytime i cut power and try restart after reconnecting to power net, the pc goes to black screen fans running, shuts himself down again, and then immediately restarts 1 time. This happens EVERYTIME i cut power. After that he just stays in black screen, nothing happens. Does anyone know what is going on here? Yesterday he worked perfectly, but today he wont even start the bootup screen.
I'm so glad i've found these forums, I just recently got a dell inspiron 530, Windows Vista. I recently did a factory restore on my computer and now everytime i put it in sleep mode, it wakes up after a few seconds without me touching it and I want to prevent it from waking up without my command. Also when I view videos in full screen on the internet, I have these two black bars that appear on the left and right of the screen, how can I get that off?
I've only just noticed... Since my fresh install of Vista x64, it won't go to sleep anymore. I've tried the Fn shortcut, and clicking Sleep from the Start Menu. When I try to put it to sleep, the screen fades to black (as usual) then after a while, it pops back on to my logon/unlock screen (I have it set to require a password after resuming). It's as though the computer goes to sleep for no time at all, then wakes up almost instantly. It might be something to do with the one missing driver that I can't seem to get hold of (Toshiba don't do x64 for my computer ), the "Firmware Linkage Driver" or something.
my toshiba equium laptop wont go into sleep mode anymore even though ive set it up to do so in power options the screen just goes black but everything is still turned on. and i was wondering if there was a way to fix it.
Why do I get black picture after I have pressed PrtSc button? Of course it shouldn't be black and it happens only when the screen is on full screen mode (for an example videos, games etc.). It also doesn't matters if I am using just PrtSc or Alt + PrtSc - the result is the same. It looks like this ---> http://img525.imageshack.us/i/blackba.jpg/ (and, no, I didn't painted it black).
When I wake my computer from sleep mode I do it by clicking the mouse. Lately, when I try and wake it, it makes all the sounds of waking but I get a dark gray screen. I can see just a tiny strip on top which shows that the page is up and running but it's covered over by a gray screen.
I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
I would like to put my wireless mouse in inactive mode during sleep mode. As it is an mouse movement, usually accidental, wakes up the computer. I looked for a way but couldn't find this facility.
It has windows vista, It just beeps and the monitor show this message: VGA Input: no input signal and turn black and then show this message: Monitor going to sleep and turns black. I can't do anything. I am not able to access anything at all. I restarted the pc so many times and while it's rebooting I press f8 f11 etc and not getting anywhere. I don't know waht to do next. My son thinks that he left the pc on sleep mode.
I was wondering if and when Vista is put in sleep mode, does it continue to accept updates as is explained on the Microsoft website? If this is true, then will email also download from the server if the Windows Mail program is left on and maximized and the DSL modem is left on? Because the modem runs hot I usually turn it off at night, along with the computer, but I'm having problems with the server, who returns email to senders because the server only allows a small amount of bandwidth to collect in each user's webmail box.
When my computer goes to sleep mode it doesnt remain in sleep mode it comes out after a short time (say 20 mins). Is there a way to make it remain in sleep mode
It seems for maybe the past couple of weeks it seems that sometimes the screen saver doesn't kick in.
When the time for the monitor just goes right to sleep it does. W/o the screensaver kicking in, or after it runs maybe a minute.
The odd thing is after I go and check the power settings, which all look fine, it works as it should. I have tried different screen savers as well as changes the timers. I don't know if this is from 1 numerous amt of MS updates or is there maybe a corrupt file or something.
Can someone tell me how to Wake my computer from Sleep Mode? When my computer goes into Sleep Mode, I can't wake it by hitting a key on the keyboard or by moving my mouse (like in XP). I have to push the power button on the computer. I've done some searches for the problem here and on Google but still can't find a good answer.
I have Vista Home Basic SP1. Recently my computer won't stay in the sleep mode. After less than 1 minute the processor wakes itself up. Any thoughts as to what might be waking my computer? I have recently installed a new virus protection program. Could that be the culprit?
This is a very nice tutorial but unfortunately it did not help me. I have an HPdv9728cl laptop. Sleep works perfectly with the factory configuration but something added since seems to prevent it. I have no idea what but it is a real PITA. I tried the task manager and nothing significant seems to be running and also tried stopping all startup programs with no luck.
I am considering using sleep mode on my laptop and even on my desktop. I nderstand that the CPU and RAM as well as some control circuits are still "on". I am concerned that my CPU and RAM will fail sooner if I do this. Running 24 hours a day has to have some bad effects. What is the downside of using the sleep mode on either a desktop or a laptop?
I recently installed Vista Ultimate x64, and I'm puzzled at how sleep mode works. It went into sleep mode, and neither keyboard nor mouse could wake it up again. I pressed sleep button again on keyboard, and computer went to hibernation, then tried to wake it up again but nothing. I finally had to push reset on the case itself.
My vista Home Premium computer Freezes after coming out of the sleep Mode 1. as attached to a wireless router, i have 2 gigs of memory, and everything seems to run fine until i put her to bed for the night?.
What works better, shutting Vista down all the way or using the Sleep mode? I have been using sleep mode more often lately and have noticed more responsive programs but is it the right thing to do
My Vista 64 machine (Gigabyte GA-X48-DS5 mobo, Q6600 cpu, 8GB ram, Radeon HD2400 vga card) has a problem when it resumes from sleep. There is a protracted (3 seconds) buzzing noise and then the display shows a vertical pattern of narrow red and white stripes and the machine hangs. Only a reset will get it to reboot - the keyboard is completely dead.
I used to have no problems getting Vista to backup and do other maintenance at night while in the sleep mode. After my Vista reinstall I get error messages from the backup program (couldn't run) and anti-virus program (can't download updates), and a few others. I assume there is a setting that I do not have right.
The system will not go into sleep mode. i have checked the settings in windows itself to make sure it is setup correctly and it is. I have also installed another OS Windows XP 64 Professional and that will go into sleep mode. I do not know what is causing it but when the sleep button on the start menu i clicked it will act like it is going to go into sleep mode then instantly wake itself up without actually reaching sleep.
My machine is an Evesham 17" Laptop, Intel Dual core, 2GB RAM, Nvidia graphics, wireless conection to internet. Just plain standard really. I have it configured to enter Sleep mode, rather than Shutdown, when I've finished for the day and this has always worked perfectly......until last night. I put it to sleep as usual, turned off external power and toddled off to bed. This morning when I came down I found it up and running with not much power left. I switched mains back on and was presented with a message that "Internet Explorer has stopped working." IE was definitely not running last night. As soon as I closed that box, another one appeared saying that Adobe Flash was ready to install an update - clicking OK enabled the update to be installed. Next Paint Shop Pro decided that it also wanted to install an update, and duly did so. I then shut the machine down completely and went off to work.
Booting the machine this evening was uneventful until I tried to view a video on the BBC website. I was then informed that I didn't have the latest version of Flashplayer and invited to download and install it. It would therefore appear that the previous update had actually reversed Flashplayer. What I hope is that some kind person can tell me is how the machine wakes up from sleep mode all by itself? I've checked BIOS and there is nothing enabled there which would allow an automatic start from sleep. I've also checked my power setting in Control Panel with similar results. Full AV/Trojan scans reveal nothing and the machine is running perfectly. I await the morning with interest.....
ive got a 4gig usb plugged into my pc used as a readyboost because its just lying about so i thought id give it a job to do but it keeps waking my computer up when i put it in sleep mode but cant find an option to stop waking the computer up in the device manager unlike the network adapters etc ..so basicly how do i get it to stop waking my pc from sleep mode?
Computer refuses to go into sleep mode. When I force sleep by clicking the power button on the task bar the computer goes to sleep for about 5 - 20 seconds and then wakes up and stays awake. The cause; Installation of a gateway router from AT&T to provide TV and internet service. AT&T tech support claims no known issues with this router, yet the computer slept just fine prior to installation of this router, and if I power down the router the computer sleeps with no problem. This is not a solution since the router must remain powered up to provide TV service to my home. I have searched the internet for a solution, and have performed all the steps in the tutorial authored by Brink to no avail.
I'm looking for some help here. I'm running Vista Ultimate x64. It no longer enters sleep mode on its own. It used to. I can force it into sleep mode by clicking on the Vista Orb and selecting "Sleep". It won't do it on its own - which is what I want it to.
I've run through the Control Panel/Power Mgt troubleshooter on these forums. All my settings seemed to be correct. Using the CMD prompt and powercfg -devicequery wake_armed yields one device: my logitech g15 keyboard. (Using powercfg -a shows that the only sleep state available is S3. That is correct for my motherboard, an Abit IP 35 pro.)
If forced into sleep, the keyboard will wake it up.
The problem, again, centers on the automatic sleep entrance. Currently set for 1 hour of idle.
It seems to me that the machine never thinks it's idle. Is that where I should start? Finding processes which are running in the background?
Need the proper settings for power management for such kind of problem. Just for a simple reason of downloading a lot of electricity is wasted if the PC is kept running for long hours.
