Sleep The Screen Fades To Black
Aug 5, 2008
I've only just noticed... Since my fresh install of Vista x64, it won't go to sleep anymore. I've tried the Fn shortcut, and clicking Sleep from the Start Menu. When I try to put it to sleep, the screen fades to black (as usual) then after a while, it pops back on to my logon/unlock screen (I have it set to require a password after resuming). It's as though the computer goes to sleep for no time at all, then wakes up almost instantly. It might be something to do with the one missing driver that I can't seem to get hold of (Toshiba don't do x64 for my computer ), the "Firmware Linkage Driver" or something.
View 7 Replies
ADVERTISEMENT
Jun 9, 2009
I've just started using sleep mode the past month and recently it hasen't been working correctly, i'm using Vista x64 Ultimate. Most of the time it works fine, but occasionally the computer won't go to sleep and will just sit there doing nothing, the screen is black and nothing happens. The only way to get back into windows is to restart.
I've read everything in the tutorial section and it hasn't helped. I have a Asus maximus formula motherboard (1302 BIOS) and a Nvidia EVGA GTX 285 with 185.85 drivers. I also have a Razer Tarantula keyboard (latest firmware) with a sleep button, which i've been using to put my computer to sleep.
View 6 Replies
View Related
May 31, 2009
I'm having an issue in which sometimes, I can't get my HP Vista laptop out of sleepmode. It used to only happen once in a blue moon, but now it happens so often that I just don't use sleep mode. I close the lid to get it in sleep mode. When I open the lid, everything lights up as if it's trying to get out of sleep mode, but then it just stops and I have a black screen.
It's gotten to the point where I have to shut down the computer whenever I am not using it. However, it happens about 3 times a week that when I start up the computer, it comes to a black screen in which I see a short blinking white line at the top left corner of my screen. It just keeps blinking for a while (sometimes it lasts for about 30 seconds, sometimes it can last for close to 4 minutes).
View 6 Replies
View Related
May 15, 2010
I went to load my computer last night and my computer wouldn't load. It said there was a problem and recommended a system repair. I did this and it then went to another screen saying it needed to check the c drive to make sure that it was consitent with the other drivers. When that was complete i could then enter my password and log in. When i did that i went to the internet then my screen started to fade to a snow white screen. My PC then froze. I switched it off and went throught the same process as above. This time i started to do a virus scan on my pc and halfway through the scan my pc froze again and couldn't complete the scan.
View 9 Replies
View Related
May 21, 2009
i wanted to shutdown my pc, so i press the red shutdown button in the start menu First odd thing happened: The computer went in some kind of "sleep mode" The screen was black, and my screen went in stand-by mode. The computer did not shut down. Whatever i did, the computer didnt go out of the sleep mode, smashed my keyboard, clicked my mouse, nothing happened. I was in a hurry so i had to shutdown my computer using the power button in my case. I cut off the power, and went away. The next morning, i plug the power back in and i try to start my computer again. The computer started the same way before i shut him down the day before: Fans are running, i dont hear my hard drive running, black screen, screen goes in stand-by mode after a few seconds. No boot menu, nothing immediately a black screeb Very odd, smashed keyboard again and again, pressed every button i could, but nothing happened. Even the leds on my keyboard werent lighted when the pc startsup, mouse does flicker.
Then i had the idea to maybe try and cut power again, and try again after that. So i did as i was thinking, cut the power, reconnected to electricity net, and start up again. This is when another odd thing happens: Everytime i cut power and try restart after reconnecting to power net, the pc goes to black screen fans running, shuts himself down again, and then immediately restarts 1 time. This happens EVERYTIME i cut power. After that he just stays in black screen, nothing happens. Does anyone know what is going on here? Yesterday he worked perfectly, but today he wont even start the bootup screen.
View 4 Replies
View Related
Mar 15, 2008
I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
View 9 Replies
View Related
Jul 1, 2008
It has windows vista, It just beeps and the monitor show this message: VGA Input: no input signal and turn black and then show this message: Monitor going to sleep and turns black. I can't do anything. I am not able to access anything at all. I restarted the pc so many times and while it's rebooting I press f8 f11 etc and not getting anywhere. I don't know waht to do next. My son thinks that he left the pc on sleep mode.
View 8 Replies
View Related
Nov 6, 2008
I'm so glad i've found these forums, I just recently got a dell inspiron 530, Windows Vista. I recently did a factory restore on my computer and now everytime i put it in sleep mode, it wakes up after a few seconds without me touching it and I want to prevent it from waking up without my command. Also when I view videos in full screen on the internet, I have these two black bars that appear on the left and right of the screen, how can I get that off?
View 4 Replies
View Related
Nov 24, 2009
I know this is a Vista news group but I haven't been able to find a Windows 7 group so maybe one of you guys can answer my question. I have the power settings to never put computer or screen to sleep and there is no screen saver setup. When I leave my computer alone for awhile the screen goes black. This never happened with Vista when setup this way why is Windows 7 doing this?
View 9 Replies
View Related
Mar 24, 2008
I am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
System:
Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775
View 9 Replies
View Related
May 14, 2008
I have recently bought a new PC running Windows Vista Home Premium. I have loaded the above programs for my son and when they a running the screen is not centred and the is a black bar to the right of the screen approx 3 cm wide. I have tried to run the games in compatibility mode and as adminstrator as recommended with other games but with no success.
View 7 Replies
View Related
May 2, 2009
I am having a very wierd issue with vista's screen saver. So basically when I leave the comp idle it goes into screen saver then turns off the monitor after 15 mins. Sometimes, more often than not, I come back and move the mouse and hit a few keys on the keyboard and nothing. The monitor wont come out of standby I try turning it off and back on, and nothing. I have the latest drivers for everything in my system and I checked the power management settings and they both are able to wake the computer up. I have a G15 keyboard and I keep the leds on and when this happens the leds are off and the lazer for the mouse is off too.
View 5 Replies
View Related
Nov 13, 2007
i went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.
View 7 Replies
View Related
Nov 19, 2009
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
View 4 Replies
View Related
Oct 5, 2009
Why do I get black picture after I have pressed PrtSc button? Of course it shouldn't be black and it happens only when the screen is on full screen mode (for an example videos, games etc.). It also doesn't matters if I am using just PrtSc or Alt + PrtSc - the result is the same. It looks like this ---> http://img525.imageshack.us/i/blackba.jpg/ (and, no, I didn't painted it black).
View 4 Replies
View Related
Aug 4, 2009
Also not too good with technical things (typical woman I know)
I'm using Vista home premium and when using my computer if regularly stops responding and the screen fades can't do anything until it 'wakes' would anyone be able to tell me what the problem could be
View 9 Replies
View Related
Mar 20, 2009
firstly, apologies for not so great english and especially for not being very computer savvy. my issue is that the audio fades in and out of hp pavilion a6010n desktop pc, windows vista home premium, sp1, 32-bit os. i always use headphones plugged directly into the front of the tower, and my lcd monitor has built-in panel speakers. this problem has been constant since i purchased the pc in august of 2007, but will resolve itself periodically sometimes for a few weeks or even a few months.
i have noticed that it most often happens upon start up and even often affects the boot up windows noises. then, if i open windows media player or anything else with audio (Internet videos, yahoo! news videos, etc.) the sound in my headphones will fade in and out from one ear to the other - usually (but not always) it is the left ear that loses audio, but lately both have done this. this will happen immediately after starting up, then usually reslove itself after anywhere from 10 minutes to an hour - then all will work well again...........
View 5 Replies
View Related
Jan 30, 2010
windows seems to boot up partially but does not get to the log-on screen and instead goes to a black screen and all you can see is the arrow shaped mouse pointer and thats all. I put the windows cd in to try to repair the installation and booted from that but still the same thing happens
View 6 Replies
View Related
Apr 21, 2009
Alrighty I went off to work with my pc turned on a few days ago, I come back and the screen is black and nothing I do is responsive to the screen. I then reboot the Pc it leading to a blue screen. Some times when I reboot it will blue screen some times it will just be a black screen that is un responsive. I have tried f8 options in advance boot optiotns, Ive tried re installing windows- it claiming my disk is full. Ive tried system restore it also says I have a disk failure. It wont let me check errors in the properties options on my hard drive. I have done a virus scan(no virus's) and I have 300gigs left of space.
View 8 Replies
View Related
Jul 21, 2008
is that when he tries to delete some files that he previously stored in the C:"Account Name",he gets a message saying that the file is unavailable in the specified location.However,that is not my main problem now,because when I was trying to help fix this problem I typed "msconfig" into the RUN box to get the startup utility box and I unchecked some of the background programs to prevent them from loading automatically when the system starts,in order to speed up the system;but when I restarted the system I can see the first screen, which is by the manufacturer of the labtop;then when vista starts loading, the screen becomes black and don't display anything,although I am sure that Vista is loading successfully but I cannot see it on the screen.
I am assuming that one of the programs that I have unchecked is responsible for displaying. I have tried to do a repair installation by using a bootable Vista DVD but I couldn't because I cannot see anything on the screen.I tried logging in on safe mode but that did not work either. How can I undo the changes that I have made to startup utility.
View 5 Replies
View Related
Jun 12, 2010
I have two users set-up, user K (with Administrator rights I believe and a password) and user N. If I login as user K, after I enter my password my computer will run for a bit (I can see/hear it logging in) but after a few minutes the screen goes black except for my white cursor and nothing else happens. If I then hit ctrl-alt-del I can see the Task Manager and switch users to user N which will start up normally and give me access to my desktop.
View 4 Replies
View Related
Jan 23, 2009
my toshiba equium laptop wont go into sleep mode anymore even though ive set it up to do so in power options the screen just goes black but everything is still turned on. and i was wondering if there was a way to fix it.
View 3 Replies
View Related
Jun 26, 2008
I have an Acer Aspire 5100 that came installed with Vista Home Premium. I upgraded to SP1 and, after upgrading to 4 gigs of ram i learned because Acer messed up video addressing, i can only get 2.96gb when i'm using 64mb of ram for video...increasing the amount makes the amount of ram to windows drop exponetally (at 256mb i've only got 2 gigs..it's wasting almost half the ram)...but that's not my issue..i'll never get it resolved becuase Acer is none-too-interested in actually doing anything to fix it and telling me it's "my problem". Oh well.
I do have a strange issue. When I take my laptop out I generally put it to sleep...I don't like hibernate..it's never worked for me in the past and sleep is just so much faster and convient. The sleep mode has worked surprisingly well for me, but i'm notcing a strange oddity. Every once in a while after bringing the laptop out of sleep mode...the screen will come on...but then it'll flicker out. If i can manage to click on the password prompt before it turns off and enter my password, the screen will come back on after the session logs in...however most of the time I have to put it back to sleep and wake it back up.
this really isn't a major major problem..i know nothing is going to work flawlessly all the time. I'm just wondering if anyone else has seen this behavior and if they fixed it, what they did to do so. I can live with it, but it'd be nice to see it gone too, ya know? Other than that...and the time the kernel-driver framework driver died...I'm quite impressed with Vista..it's turning out to be a rather usable OS.
View 4 Replies
View Related
Jun 27, 2009
I have tried installing many different games on my pc, which are quite new and have been released in the last few years. The installation goes fine, and everything is great. When it comes to launching the game, well, i double click the file to run the game, and i get a black screen. Nothing happens afterwards. It just stays black. 'Ctrl + Alt + Delete' does not work, and neither does 'Alt + Tab', or any other keyboard shortcuts. This results in me having to hold in the power button and turn my pc off like that.
Any idea's on what could be wrong? It is extremely frustrating, due to the fact that i've tried running about 3 - 5 games on my computer, and neither of them work, without a black screen coming up after trying to launch any of them. I've tried numerous things like 'Running as Administrator' and changing compatibillity modes and so on and so forth, but none of that works.
View 9 Replies
View Related
Apr 26, 2008
I was having a weird problem with my screen going black at random after installing any version of Vista, and kept having to force a restart because there was no way to get the screen to come back on. I searched all the forums and it seemed to be very common, but as with most of the forums everyone was argueing about how to fix the problem instead of helping the people with the problem. So I'm posting this one in the hope that it may just help one or two people with the same problem.
My remedy was simply to update the BIOS to the latest version P32 I think from the XFX website, and the problem was no more, I also updated the High def audio driver from the same site, now my machine has been running flawlessly for three days now.
View 3 Replies
View Related
Jan 18, 2010
I was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?
View 9 Replies
View Related
Jun 18, 2008
I have Vista Ulimate 64-bit and everytime that I reboot I get a black screen before the Microsoft Windows scrolling bar.
This is the sequence.
- I reboot.
- I get my bios information screen.
- I get the white, blinking line in the upper left corner of the screen.
- Then the screen goes black with no hard drive activity.
I then can perform a Complete PC restore from my second partition on the same SATA Hard Drive and I will then be able to boot into Vista with no problem.....until I reboot, then I get the Black screen again. It is a vicious cycle.
I have tried to remove video cards (2 x 8800 GTS), memory (4 GB), sound cards (X-Fi Music), load the default bios settings....nothing works. Only a Complete PC Restore cures it, but only until I need to reboot the PC.
View 9 Replies
View Related
Oct 8, 2009
I run Vista HP/SP2. The other day after various installs, updates and maintenance tasks I ran with no problems and ended the day by putting my laptop into hibernate mode. The next day when I powered on, my system would not come up...my system disk C: was corrupt. I finally got System Repair to run and it appeared to fix and recover my C: disk to the point that I can see my files still exist via Recovery command prompt. However when I
restart, my screen goes and stays blank (black) with my cursor usable but to no purpose. I tried System Repair again but it tells me it can find nothing to repair. I tried starting in safe mode and it loads two screens worth of windows files before going to a blank (black) screen with my cursor usable but to no purpose. The last windows file loaded is a crcdisk driver file.
View 9 Replies
View Related
Mar 27, 2009
When I login all I get is a black screen and "my documents" is open. Basically, the OS has GONE! I can still use the computer, ctrl alt delete etc.. run tasks, just that there is no desktop or toolbars etc.
View 5 Replies
View Related
Nov 13, 2008
I need desperately answer,no one found the solution no one. I have my Ati Radeon HD 3870X2 series connected (hdmi to hdmi) to my Samsung LE40A656F1. But when i set a game to 1920x1080 resolution there is a black frame around the screen. If i use an other resolution like 1360x768 there is no a black frame. I always use the latest drivers and hotfix for my graphic card.
Black frame i mean black (empty)frame around the screen. My graphic card is 1080p capable. My tv is 1080p capable. For now i test it with FarCry2,Sacred 2,Fallout 3,Dead Space,those games natively supports a resolution of 1920x1080p. But i still get the black frame when i set the game resolution to 1920x1080p...........
View 6 Replies
View Related
Nov 18, 2008
I've had an issue with my computer booting properly. I went from a 1:05 boot time to over a 2:00 boot because Vista go's to a black screen instead of loading my desktop. I'm not sure where to start fixing this, I've always been good with computers and have tried all the text book fixes and I have no where left to go. I made a video which is uploading now and will be up incase this doesn't make as much sense as I'd hope. All my drivers are up to date.
View 7 Replies
View Related
