Open Html File With Data In It?
Dec 8, 2009
Hello! I have downloaded from internet, legally, 2 music albums each 120 mb each! However, they are in html format and cannot manage to extract the files that are in it! I am sure that there is someway to take the tracks from these files but I knew that html are internet files! When I double click on these html files which are supposed to have the music in it, automatically I am forwarded to a web page that never loads and moreover the PC freezes!
View 7 Replies
ADVERTISEMENT
Mar 23, 2008
Having changed my default browser, the .html and .htm file associations had been set to "unknown". Don't ask me why. Trying to set them via the usual mechanisms: "open with" or "file associations" menus does not work because they are populated only with MS programs. All attempts to select other programs via "browse" option fail. I can select the program but it is simply ignored and no change to the file associations happens. Nor is the selected program added to the list of programs available for selection. As there is no option provided for typing in the full path, as used to be the case with earlier and better operating systems, and the "browse" option does not work, I am totally stuck.
Is this a new MS policy to prevent users from running non-MS programs?? Whatever it is, it is very frustrating and affects all programs and extensions, not just the .html of the above example. Another very annoying thing is that even when I manage to run some non-MS programs manually, they will only work if run in "admin mode", as they are prevented from writing to disk. Are users not supposed to be allowed to write to our own disks anymore????
View 9 Replies
View Related
Jun 29, 2008
I received zipped files via FTP. I extracted them and brought them to a C:folder. I have three choices: a CD, a Web or a LMS version. I cannot open any of the key HTML file in them. The choice is either player.html or index.html. I can view the source code but keep getting blocked. I tell Vista to allow blocked content. Nothing. I am the administrator. I started fooling with the Active X and Scripted security features since this is the warning I receive when trying to open the HTLM file. I enabled everything you aren't supposed to, received the dire warnings but still cannot access the content. I put everything back to default (because the dire warnings are scarey!) I am using Vista Home Premium. I am desperate to open any of these three files as I have a job using them next week.
View 4 Replies
View Related
Oct 5, 2009
I have a really strange problem on my VISTA home premium PC. I have a number of HTML files stored in documents folder, but when I try to edit the HTML file in notepad I get the following error message: Cannot create the file. Make sure that the path and file name are correct.
File and path are correct because I just opened it from the documents folder. What makes it strange is that if I change the extension from HTML to TXT I can edit and save without any issue, but once I change back to HTML I lose the ability to save any edits. Also, if I copy the HTML file to another folder such as desktop or C: root, I can edit without any issues. I've checked the properties of the folder and file and haven't found anything out of the ordinary. Searched the MS KB and haven't turned up anything.
View 9 Replies
View Related
Sep 17, 2009
Note: The following description refers to an HTML file residing in a folder
on my computer, not an HTML file on the internet (web page.) When I open an existing HTML file with Notepad, then attempt to "Save" it, an alert message box appears which says: "Cannot create the C:UsersMeDesktopfolder namefilename.html file.
Make sure the path and filename are correct." I can "Save As..." a different file name or different file type, but cannot "Save" in the normal manner. This problem only affects saving an HTML file. There is no problem with other file types. I'm not certain of the time sequence, but I think I downloaded an update to
QuickTime since the last time there wasn't a problem.
View 9 Replies
View Related
Sep 16, 2009
I can create and save an HTML file but can't save changes to an existing HTML file. When trying to save using Notepad, the error window says:
Cannot create the
C:UsersRoyDesktopWebPages est.html file
Make sure that the path and file name are correct.
When trying to save using Notepad++, the error window says:
Save failed Please check whether if (sic) this file is opened in another program.
What I can do with Notepad (I haven't tried any work-around with Notepad++) is to first save the .html file as a .txt file, then open the .txt file and successfully save it as a .html file. I tell you this as a possible diagnostic clue; it is by no means an acceptable fix. This problem appeared suddenly out of the blue. I can think of nothing that might have caused it. I have tried the usual stuff, such as re-booting, but nothing has worked.
View 7 Replies
View Related
Sep 21, 2009
For background on this post, see "Unable to save HTML file" posted 9/17/2009 12:31PM. Comments:
(1) A reset of IE did not fix the problem.
(2) A system restore to the day before installing QuickTime did fix the problem. This doesn't prove that QuickTime is at fault, of course, but I still have my suspicions. I will probably reload QuickTime shortly, and if the problem returns, I'll post it.
Note: It appears that the system restore reversed the IE reset, so for anyone (like me) who might be nervous about doing the reset, the restore is a safety backup.
View 9 Replies
View Related
Mar 27, 2008
Is it possible to place images in html signature file? If so, how? I believe in Karma. That means I can do bad things to people all day long and I assume they deserve it.
View 7 Replies
View Related
Aug 8, 2009
Everytime my computer starts up, it says Rundll32 stopped working, then a popup saying it was shut down by DATA EXECUTION PREVENTION. It also happens when I open Control Panel and a few other programs....
Here is the error:
Problem signature:
Problem Event Name: BEX
Application Name: Rundll32.exe
Application Version: 6.0.6000.16386
Application Timestamp: 4549b0e1
Fault Module Name: StackHash_85ff
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 000e026d
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1078
Additional Information 1: 85ff
Additional Information 2: 926a10026686b238588fcb62252965ed
Additional Information 3: d416
Additional Information 4: aaadd317ad2849f7f128eb9d447a17bc
View 9 Replies
View Related
Jan 3, 2008
I have 2 accounts on my laptop running Vista Home Premium and Office 2007. One for me and one for my wife. Currently she can't see any email received using my account. The goal is to see all email messages both for her and me. Data files were stored in different locations C:Users<me>...Outlook.pst and C:Users<wife>...Outlook.pst. Well we couldn't see inbox of each other while we are sharing the same email address. I wanted to add her data file to my Personal Folders and my data file to her respectively. When I try to add the data file I've got the error: "The file C:Users<wife>...Outlook .pst cannot be opened". I check that I do have Full permissions for this file.
View 9 Replies
View Related
Feb 6, 2009
I have Windows Vista. I have made a video, changed it to a WMV file and tried to load it into Windows Movie Maker so I can edit it, but this keeps coming up. *-Windows Movie Maker cannot use the audio file C:UsersPopsDesktopBlokart.wmv is in use by another program or does not contain valid audio data.-*
View 6 Replies
View Related
Jul 1, 2008
We have a access data program that we use for fiscal year like 07/01/07 - 06/30/08. I have copied the information into a new access file but the date is set for last year. Where do we go to change the date? We did not write this program. We are using windows 2000.
View 7 Replies
View Related
Nov 6, 2009
Does Windows live mail have the 2GB data file limitation that OE had or has it been improved? Did some Googling but can't locate an answer.
View 5 Replies
View Related
Mar 23, 2008
The only way I've been able to have my signature included in posts is to = use RTF, but even then the signature is automatically included only with = a new post. When I post a reply I need to manually insert it. I'm using = an HTML file for the signature.
The only way I've been able to have my signature = included in=20 posts is to use RTF, but even then the signature is=20 automatically included only with a new post. When I post a reply I need = to=20 manually insert it. I'm using an HTML file for the = signature.
View 9 Replies
View Related
May 10, 2009
I am having installation problems with a Polish/English Multimedia dictionary. At the start of install I get a pop-up advising that the program needs to install MS Visual C++ 2005 SP1 to run properly. When I click OK it commences the installation of Visual C++ but does not complete the configuration stage before the installation of the dictionary software starts.
The dictionary installation then continues without problem ok but when I try to run it I get an error message that the program cannot read the data file and that I should reinstall again. Also, I note that Visual C++ has failed to install.
The software is Vista compatable and does install ok (including the Visual C++) when I tried it on a on a Vista x86 latop. I have tried installation with UAC disabled, Norton Internet security disabled, even tried installing it in safe mode with a hack to run Windows installer. I have run all installations as Administrator.
Also tried a separate install of Visual C++ 2005 SP1 and also the 2008 version but the dictionary software does not recognise either. To get the 2005 version installed I had to first install the base pack and then the SP1 version, but then I have no idea if it has installed properly.
My laptop is an HP Pavilion dv 3510nr and OS is Vista Home Premium x64 and I bought it about 4 weeks ago in the US. Maybe there is a running service that is conflicting with the software installation, I have no idea.
View 9 Replies
View Related
May 15, 2010
Whenever I request a "File|Open" or "File|Save" from any application, the mini-Windows-Explorer dialog box that opens freezes and hangs the entire application. Happens with almost all applications. Not limited to just Microsoft programs. It does not matter if I like change the download folder or if I rt click always the same.
Back when it was under warranty Hp tells me to just restore to original settings. I hate to do that. But I am about to see that this might be the only fix for it. (But I am hoping not.) I think it started a long time ago when I was changing the USB ports I used for my external Hard drive and it changed drive letter. (maybe maybe not.. just seems I remember that being something that had happened when I first recall things hanging...) anyway I have all drives in the place I want them now and this issue still happens even if I dont have that external drive plugged in.
View 9 Replies
View Related
Feb 21, 2009
I had to reinstall Vista on my computer. Previously I used Outlook. I can't find the activation code so I want to try Windows Mail. I saved my Outlook email pst file. Is there a way to get Windows Mail to open that file.
View 6 Replies
View Related
May 12, 2008
Trying to open a Word file, get message "Windows can't find so-and-so file". Similarly, trying to open it programmatically in Excel VBA, I get the same message. But if I right-click and select "Open with" and pick Microsoft Windows, it works.
View 7 Replies
View Related
Apr 3, 2008
Using Vista Home Premium with SP1. I cannot open a .dat file and cannot set an association to open it because .dat is not listed in the Set Association menu. How do I get .dat listed so that I can set an association to it?
View 9 Replies
View Related
May 17, 2008
Could anyone tell me why pdf files are so slow to access (page down, scroll down/up, etc. Didn't notice this on xp, it is incredibally slow on Vista 32
View 6 Replies
View Related
Jul 5, 2009
I downloaded a very big torrent file (size: 6GB). This torrent contains a zip file. When I open the zip file, all the files are with extension .bin. Is there any possible way to open these bin files?
View 8 Replies
View Related
Apr 28, 2008
Whenever I open a .pdf file, whether in Acrobat or within a web browser, my computer suddenly goes into low-color (8-bit) mode, and I have to go to personalization/display settings to correct it. I have the most recent version of Acrobat, and have tried uninstalling and reinstalling it, but this still happens every time I open a .pdf! Is there anything I can do to stop this, and prevent it from happening in the future?
View 4 Replies
View Related
May 12, 2008
When i receive a PPS file in Windows Mail, and click on it, it does not open, this is despite the fact that i have PPS Viewer 2007 loaded and have set the default in the default Associations panel to XML Converter (If i set it to Power POint Viewer then it says no program associated with it) If i try to open the pps file then it asks me to save it first then i can view it... Also, i saw previous posts about registry entries not set to open but mine appear to be set to open..
View 4 Replies
View Related
Apr 4, 2010
I've seen similar post on this and tried to follow the replies for the fix but didn't work for me so I thought I'd post my scenerio. I downloaded some software from a company named X10. It's for monitoring security cameras from a remote location. The software is name Vangaurd. I'm trying to uninstall it but I keep getting "cannot open log install. log file". I notice there is not a folder for this in my program files, therefore I do not see an "unistall". Does anybody know how I can uninstall this? I am using Windows Vista.
View 9 Replies
View Related
Oct 17, 2008
This pops up when i try to open Control Panel>>Administrative tools>>event viewer:
"MMC can't open the file C:WindowsSystem32eventvwr.msc. This may be because the file does not exist, it is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file." I have tried everything that I know about to solve this problem. I have googled the problem, and came up to the solution of running "regsvr32 msxml3.dll". When i run regsvr32 msxml3.dll(on some forums i have read it should be the solution) I get another new error code:...........
View 9 Replies
View Related
Feb 18, 2009
I want to search for a file and when I find it, I want to be able to right click and select open file location so a explorer window will open and I can see where the file is located...this used to exist in xp search.
View 7 Replies
View Related
May 8, 2009
I am trying to open a downloaded file and just can not seem to... I think it is in ZIP format. I have Vista PH and the file is a font - it will not open in Paint.Net or any other program and I am not able to un-zip it.
View 7 Replies
View Related
Mar 22, 2009
I received an e-mail with attached PPS file. When I clck to open the file, a window pops up with the following. This file does not have a program associated with it for performing this action. Create an association in the Set Associations control panel. How do I do this?
View 8 Replies
View Related
May 27, 2010
A friend left a garbled message on my telephone answering machine asking me for help but I don't use Vista or iTunes, so I'm hoping some kind soul on here can help. Basically any file he downloads (it may be a photo of his grandson sent as an email attachment in jpg format, or a program such as skype.exe, or a pdf document) cannot be opened. When double-clicked, any downloaded file opens up iTunes and presents the message "iTunes cannot open this file". I know it's not much to go on but his message recorded badly.
View 4 Replies
View Related
Mar 7, 2010
So apparently I had a massive amount of viruses on my computer, of which I recently purchased Vista anti-virus to remove them all. This worked great for a bit but now whenever I try opening any program/file it asks me which program I want to use to open it. This includes .exe files, along with things like IE, iTunes. Windows Media Player, and many others. I have downloaded a patch that is supposed to fix this, but when I go to open the file (which is a .exe one) it once again asks me which program I want to open it with.
View 4 Replies
View Related
Mar 23, 2008
How does one go about opening the minidump files? what information that they contain and if they contain information.
View 4 Replies
View Related
