Able to start install of Vista enterprise, but when comes to options of language, time and currency and keyboard layout, the keyboard and mouse become unresponsive. Can not even turn off numlock as the light will not change from being on. Keyboard and mouse work, tried a USB mouse and keyboard - same issue.setting up as a dual boot - XP already installed on 1st partition.
View 4 Replies
Over the past few days my Windows Explorer has begun to give me trouble. Stops responding several times a day. I've been through the Reliability and Performance Monitor and the Event Viewer and cannot find any specific correlation with installs or hw, sw changes. Most, but not all, of the errors seem to be related to ntdll.dll and encoders.dll. I can search for the specific error codes one by one, but since there are several, I thought there might be an easy way to check or re-install Explorer.
View 9 Replies View RelatedRecently I have noticed that what ever application I am in, often it stops responding for a few seconds and then it starts responding. I am operating Vista Home Premium 32bt. and have Norton Internet Security 2010 running. No other programs running at startup except sidebar.
I appreciate help on this matter. I have run full NIS scan, full Malwarebytes, and full tune up in system mechanics 9.
my explorer.exe stops responding every time i attempt to login to my account. My account is the only account on the computer. Right now i am in safe mode with networking and it is working fine. Any advice on how to fix without formatting? I have attempted to replace explorer.exe with a different one i copied from my aptop, but for some reason i do not have access to delete the old file.
View 5 Replies View RelatedEvery time I try to use movie maker (Vista) to publish my movie as an avi file to the computer, movie maker stops responding (locks up & greys out) and produces the check online for a solution and restart the program. the fault module is "StackHash_1703"
View 6 Replies View RelatedIm trying to delete this .3gp file. Every time I delete it, this stupid Calculating time remaining pops up....and the file cant get deleted because the explorer stops responding, and I have to restart explorer. The file is only 290K. And the system can't delete it! Also when I right click on it and click preferences, it never comes up.
View 5 Replies View RelatedI just converted to Vista Enterprise with and IBM laptop and docking station. I keep losing my external IBM keyboard, 3 or 4 times a day. If I pull out the USB plug and put it back in to reset it my keyboard starts working again. I've updated the latest driver on the IBM website but still have the problem.
View 5 Replies View RelatedSo whenever I turn on the system, after I run a few light aplications, like Internet Explorer or PC Wizard for example, the screen turns dark for 2 seconds, and the error message: "igfx display driver has stopped responding and was successfully recovered" pops up. This may happen once every 30 minutes or even around 5 times in 20 Seconds, resulting in a blue screen of death. The latest driver which is currently installed for the Intel chipset is 15.13.6.64.1908 (7.15.10.1908) which seems to be causing the problems. This driver is also unsigned by microsoft, but is the most current driver to date (pcd5srvc_x64.pkms, igfxcoin_v1908.dll, and igdkmd64.sys comes up as unsigned in sigverif.exe). I uninstall this driver through Hardware Manager, but the current driver then goes down to (6.0.6001.18000). Even though this old driver is stable, my resolution is horrible and websites with picture intensive pages lag and flash like crazy. I've been searching the internet all night with this problem, and this is my last resort for an answer. I don't know what else to do. I can't even find a lower driver version for this chipset on Intel's support page.
View 9 Replies View RelatedI am running x64 vista business on my brand new machine using a q6600 (g0), asus maximus formula, 2gb kingston hyperx RAM, and a 160gb SATA boot disk and a 500 gb IDE drive. Also, a 8800 gt. I am able to run programs such as internet explorer or whatever, but any time i am in a program (including the search bar) as soon as i press any key on the keyboard the program hangs (with the serch bar it says Windows Explorer is not responding" on the Not Responding dialog box. I cannot use my computer until this is fixed, and i am in desperate need of help. i can't find anything about it online, can anyone help me?
View 6 Replies View RelatedI am experiencing a constant and most annoying issue with my new computer with a new Ultimate x64 Vista install. The thing just "Hangs." I can be going along, often in a browser, either IE7, now 8 and Firefox, or in other programs and such, and the thing just stops. The sidebar CPU meters will be slowed and the graph drops to the bottom, the Network Meter activity drops to the bottom too. Often the background stops but not always and the same for the second hand on the clock. The circular Aero spins and the windows are unresponsive, often the window is reported as "Not Responding" and if something does respond to a mouse click only the button moves but any corresponding program action doesn't happen.
The thing will then just sit there like this for half a minute, a minute, sometimes a minute and a half, and then suddenly eveything starts running again and zooms right along. Till the next time which could be the next time I click on something or a few minures later, or longer or shorter. I am coming to my wits end. I am almost beginning to believe the Mac guy on the commercial. I have downloaded and run the System Info program.
When we try to install from the AE3 Icon, it stops 30 seconds into installation process. saying that the game is not installed and that it will now exit.
View 9 Replies View RelatedI have a problem when trying to install windows vista 32 bit on my pc. I try to boot from cd but when i press a button to boot from cd the cd stops spinning and i get my pc restarted. same thing everytime. I don't know why this happens. i have 2 IDE HDD (120+250 GB) and a IDE converted with an adaptor to SATA, DVD drive.
View 6 Replies View RelatedI have installed Vista x32 with SP2 Ultimate. When I installed anti-virus, BSOD came. Same AV version haven't problem with Vista SP1, what is updated to SP2. Then I try to install Vista with SP2 to hyper-v server, but installation stops immediately error screen (STOP: 0x0..8E). Is n_windows_vista_ultimate_sp2_checked_build_x86_dvd_342432.iso packet ok ?
View 9 Replies View RelatedI was just wondering if anyone else had experienced these annoying freezes that occur randomly in Vista 64. It can happen while I'm playing a game, it can happen while I'm browsing firefox etc. I freeze up about 4 times a day and the only solution is a hard restart.
It is beyond me, I have the video card drivers up to snuff, all updates are installed, virus scanners/spyware scanners, video card isn't overheating, CPU idles at 33 loads at 42. I'll describe the problem a little better other than to just say it's freezing. When the freeze occurs, the entire screen stops moving, I cannot move my mouse, all sound stops working, and if there was a sound playing, it will get mutilated into a nasty buzz.
I followed the tut here -> http://www.vistax64.com/tutorials/11...ate-1-rc1.html
Got all the prereq installed. Then after waiting the 10-15, I acutally had dinner and came back started to d/l the SP. It got to 6% and stopped, sat there for a while and then failed with a code of 80070002. Click on the get help link and followed the instructions for clearing out the Software Distribution folder.
Then I checked for updates again. Did the same thing, stopped and failed at 6%. This time I clicked the 'Try Again' button. This time after hanging out for a while it went to 19%. But then it failed AGAIN! If I try again it just stays at 19%.
I figured that maybe the server is overwhelmed. It was 9pm EST or so. I tried again here at 5:15am figuring that most of the US is in a coma at this time. Same results.
Any ideas on how to get this SP? I'm plum out of ideas!
I'm down for anything, just to get this to work! Why did they have to change the way SP where handled? The d/l from a URL was just fine!
Problem: sfc/scannow stops at 76 %, gives no Info just that it can not
perform the requested operation
it started when I Restored the System to Factory Install with the Discs ( 2
Discs) sent to me by Acer by mail
SP 1 is already on the Discs, all Updates installed successfully, including
SP 2
Event Viewer shows some Errors but don't know witch are associated with the
sfc/scannow
Problem Reports and Solution (reports but no solution found)
1.-
Problem signature
Problem Event Name:WindowsWcpOtherFailure3
OsVersion:6.0.6001.18000:1
File:basewcpsilmergedtutsystem.cpp
Function:Windows::Rtl::SystemImplementation:irectFileSystemProvider::SysReadFileLine:1920
Status:c0000011
StackHash:0x563c8df4
OS Version:6.0.6001.2.1.0.768.3
Locale ID:1033
2.-
Extra information about the problem
Bucket ID:182505946
Problem signature
Problem Event Name:CbsPackageServicingFailure
Stack Version:6.0.6001.18000
Package:Package_for_KB973687~31bf3856ad364e35~x86~~6.0.1.1
Status:80070026
Failure Source:Execute
Start State:Resolved
Target State:Installed
OS Version:6.0.6001.2.1.0.768.3
Locale ID:1033
Extra information about the problem
Bucket ID:769551469
I suspect that its related to the CBsPackageServicingFailure or both or more
don't know where to go from here
would really like to get sfc/scannow working Email with Acer America this Computer is still under Factory Warranty don't know what it covers, but they DON'T want me to return it to Store in Winnipeg where I purchased it don't know if I been screwed, this computer (LapTop) does Not have a Recovery partition, it has 1 disc C and 1 partition 232 GB (my Emachine Home Basic Desktop did have a Recovery Partition on D)
the Store made me set, 2 Discs after I complained and Acer sent me a set, 3.
Discs after some Emails already been at the store they are slick and have few answers , don't think I'll get far at the store.
I am running Vista Home Premium x32 SP1 on a Dell XPS T8300@2.4 GHz. Whenever I try to run sfc /scannow it stops at either 39% or 69% ('Windows Resource Protection could not perform the requested operation')and at the same time I get a pop-up message 'Windows modules installer stopped working and was closed'. I decided to run the sfc because yesterday morning I found my pc with a blue screen and the dreaded 'Windows has encountered a fatal error...' message. It booted successfully but I noticed several things (so far): all entries from System restore had disappeared, Windows updates had failed several times in the last 3 days trying to install Windows Vista SP2 (KB948465), and the 'uninstall/repair program' button in the control panel did not work (when I right-click over a highlighted program I only get two empty squares and no options). So I could not restore the system, could not update it and could not uninstall the most recent programs that might have caused the problem.
The next step was to do a repair install since I have the original Dell installation DVD for Vista SP1 but the upgrade was also unsuccessful - in the beginning of the installation I got a pop-up window with the message: setup.exe - Bad Image : C:Windowssystem32uniplat.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. I clicked 'Ok', the installation ran for about 1 1/2 hours and afterwards a message informed me that it was not successful and my system was being restored to its previous state.........
Just starting this afternoon whenever I go to view pictures, WMP stops working and shows this message:
Problem signature:
Problem Event Name: APPCRASH
Application Name: explorer.exe
Application Version: 6.0.6001.18164
Application Timestamp: 4907e791
Fault Module Name: PhotoViewer.dll
Fault Module Version: 6.0.6001.18000.....
When I open outlook, vista stops running after a few minutes Whenever I work in Oulook safe mode there seems to be no problem. This started after I downloaded SP 1 Someone experience?
View 4 Replies View RelatedWindows explorer many of the games i have steam (which is a program where you buy games from)control panel my computer and even my computers screen saver i have had this problem for about a week now, and only had my computer for about 3 weeks here is the spec......
Manufacturer: Acer
Model: Aspire M7300
Rating: 5.7
Processor: ADM Phenom(tm) II X3 710 Processor 2.60GHz
Memory (RAM): 6.00 GB
System type: 64-bit Operating System
now i dont have many programs that start up when windows starts.
Built a new pc last week. Installed vista 64, all was great! Installed Crysis (what a game!!!) Connected to the net...downloaded microsoft updates...dvd stops responding. Thats where i've been ever since. I've spent hours trawling the net trying different things ie upper/lowerfilters (which don't appear in my registry), remove drive, re-install, checking drivers/firmware, apply registry patch, but still can't get it to work. I've tried to start a fresh install of vista but without a dvd drive thats difficult! (not sure how much begging required :-) Device manager shows no errors - dvd working fine! DVD is TSST Sh S223Q samsung dvd/rw P5Q PRO m/b q6600 HD 4850 4gb corsair ram....
View 6 Replies View RelatedWorks, Office 2007, Lotus 123 and others, constantly freeze and (Not Responding). My first reinstall was because UAC locked me out of Drive C:, yet the OS seemed to run ok. I took ownership and all priveledges and still could not access. Finally reinstall! I backed up drive C: before reinstalling (choose Drive C: only) yet when I reinstalled the backup it overwrote Drive D: Partition) Corrupting it. Second reinstall was similar only affected Drive M: again same problems forcing This time reload from CD. Also have a lot of trouble dropping the network connection. This time I cannot (chkdsk M: /f), when I use F9 On boot it only checks CPU, Memory (4mb) and drive C: Then it aborts. All my diag programs uncover no problems. Drives all check healthy and have been defraged regularly. All programs load extremely slow (2.4G Intel core 2 Quad Q6600) I think it should be fairly quick to respond.
View 4 Replies View RelatedI get "IE8 stops working" messages whenever I open a second tab, this problem started after enabling "Google Chrome Frame" Add-on. I like to keep this Add-on as it makes IE8 faster, I would appreciate any workarounds to resolve this, I have attached some info from event viewer.
View 3 Replies View RelatedGreetings, I just formatted my new computer and when i try to play a dvd with WMP it loads the dvd and goes to a black screen and thinks for a moment, then a windows box pops up and says that WMP has stoped working,"we will look for a solution to this problem"
"This problem was caused by *NVIDIA nForce Networking Controller*,which was created by *NVidia*.
A newer version of this product is available that might solve this problem."
I believe that suggests that i reinstall my nvidia drivers, which i did, but it didnt work.
I have no codec packs installed either
Before the format everything worked perfect but i was having pop up problems and i think i had a virus of some sort.
HERE IS SOME MORE TECHNICAL INFO:
OS: Vista 32 Enterprise
Graphics card: EVGA 9800 GTX +
Product
Windows Media Player
Problem
Stopped working
Date
2/19/2009 7:42 AM
Status
More information available
Problem signature
Problem Event Name: APPCRASH
Application Name: wmplayer.exe
Application Version: 11.0.6000.6344
Application Timestamp: 46e5f12e
Fault Module Name: StackHash_5255
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000374
Exception Offset: 000af1c9
OS Version: 6.0.6000.2.0.0.256.4
Locale ID: 1033
Additional Information 1: 5255
Additional Information 2: a75fd876183f6f3219cdd8086d3ff68b
Additional Information 3: 9767
Additional Information 4: b9e147287e4dfdd53aff7aa96f91c5f1
Extra information about the problem
*Bucket ID: 529184598*
I just got a new HP pavillion dv3 with vista home primium. But every time the computer went to sleep the clock and date stopped. I could not find out why, tried to remove sync with internet but nothing helped. But then we tried to correct the time and date ind bios and now it works Don't know why but it does. So if anyone else have the same problem I think it is worth trying.
View 0 Replies View Relatedwith all the latest games I have bought (gta IV and mirror's edge) I get DEP errors. I tried to exclude them from DEP but my vista won't accept it. So now every ten minutes my games freeze up. What can I do about it? I've read some artikels about shutting of DEP completely. I'm wondering though what that will mean for my security. On some other forums it has been implied that the DEP errors have something to do with faulty hardware.
View 9 Replies View RelatedI am trying to run Easy DVD Clone on a vista computer. The decryption happens through a DVD Fab software which transfers the video ts folders to a location that Easy DVD Clone can then read from. The initial process works fine and it transfers the files to a temp location but then when it tries to burn it to a DVD, the process stalls at 99% and right after I get the pop-up window stating "Easy DVD Clone has stopped working". This happens with all DVD's. Do you know why this maybe the case and if this a vista related issue? I have already disabled my virus protection software as someone has suggested somewhere that it may cause a problem and I also deleted some other dvd burning softwares that I had on there but the result is much the same.
View 7 Replies View RelatedI'm using Vista Home Premium. I have a Brother 5170DN (direct network connection) that has been working fine with my older computers running earlier Windows versions. The trouble is that when the IP address of the printer changes, Vista is no longer able to print to it, so I end up having to reinstall. The reinstallation adds a new TCP/IP port into the driver, and then it works fine until the next time. Since my network is changing frequently right now, due to reconfiguration, this is a pain.
View 6 Replies View RelatedI just received my upgrade Windows 7 disks. Ive followed the steps and everything appears to be ready to upgrade for vista... Ive tried the upgrade process 2 times and both times my computer got to 62% of the final part of the install and sat there from 11pm until 730 am. what is the problem? bad software?
View 6 Replies View RelatedI am on windows vista sp1 home premium, and I often get a problem saying rundll32 has stopped working. I googled and found out that this is often caused due to nero's codecs which interfere with vista, but I have neither nero nor roxio installed, except that I use the latest version of vista codec pack. I just checked out by disabling startup services in msconfig and rebooting each time, but it's all the same every time, the problem just keeps repeating. I often get the problem on resuming from standby.
Can anybody recommend a solution? BTW, i am on an HP Pavilion dvt6846tx. Problem log from "Problem Reports and Solutions":Product Windows host process (Rundll32)
Problem
Stopped working .........
I have a Asus pro80 series laptop with Vista 32 bit. I connect using the ethernet Lan. Uptil about one month ago averything was fine. Since then my Connection after about 10 to 20 minutes slows right down until it stops. It dosn't actually disconnect from my provider. it just stops. If I dis-connect and re-connect then it will work again for a while. Then stops.
What I have tried so far: Updated the drivers for the realtek ethernet. Reinstalled Vista Installed the vista service pack 1 Checked power settings for the ethernet card. Other info: I know that the connection its self is ok as i use the same cable for my works laptop without any problem. Hardware manager says all is running correctly Changing user has no impact.
