Firefox Browsing And Got The Boot Screen

Jan 13, 2010

i was in firefox browsing and the laptop froze so i rebooted, this happened again so i rebooted again, now it gets to the boot screen and just keeps going through the progress bar and the (c) microsoft screen forever and ever

i have an oem vista disc that came with it and i placed it in the drive, selected boot from dvd and it went through the loading windows files screen and then got to the msoft/progress bar screen for about a minute and then a blank screen with no hdd/dvd activity. i ran system diagnostics from the bios menu and all hardware checks out. i've also checked all cables,etc and everything is good

i've tried safemode and it gets stuck at crcdisk.sys so i figure the problem is with the file structure on the hdd. anyone know why the boot from dvd would happen like above. I have downloaded a vista recovery iso but until i can get to work i can't burn it to a disc (snowed in today- bloody weather!)

View 5 Replies


ADVERTISEMENT

Blue Screen Browsing Through The Internet

Jan 1, 2009

A couple of times my screen turned blue for no reason. When there is no activity on the computer, it will turn to Sleep mode. On two occasions I went back and was browsing through the internet with my mouse and twice the blue screen appeared for no reason. I had to turn off the computer as the blue screen remained. Any reason for the blue screen?

View 5 Replies View Related

Boot 32bit: Black Screen With 'Windows Boot Manager'

Oct 8, 2009

I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."

File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.

When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......

View 9 Replies View Related

Fix Boot Logo, BOOT Screen No Works

Apr 16, 2008

This is the best install I have ever done (or was)…I did a fresh install and followed a tweak which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and……well…this is where I stuffed up…My BOOT screen no longer works properly, even with the original “winload.exe.mui” file replaced.

I downloaded and used “Vista Boot Logo Generator” I loved the results on my last install…It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig…ect….BUT......

View 6 Replies View Related

Firefox Tweaks: Get Vista's Glass Effect In Firefox

Jul 17, 2008

For all you people who have been looking for a way to get Vista's glass effect in Firefox, look no further. Here is an extension for Firefox 3 that will do it. (supports 32bit and 64bit FF versions) Information Here: [Ext] Glasser 1.0.16 (BETA) - Add Vista Glass to Firefox mozillaZine Forums. Menubar Addon: This Addon hides the File/Edit/View/tools menu using the ALT key to show it temporarily.

View 9 Replies View Related

Boot: Screen Hangs On A Black Screen

Nov 13, 2007

i went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.

View 7 Replies View Related

Boot Screen Change

Aug 22, 2008

Is it possible to change the bootscreen with vista service pack 1? Coz I tried tuneup utilities and the one on Boot screen but they dont work...

View 3 Replies View Related

Modding Boot Screen With SP1 (32 & 64 Bit)

Oct 16, 2008

0) Run msconfig command and sign the "No GUI boot" option under boot options.

1) Use Vista Visual Master to generate winload.exe.mui with the image you like....

View 3 Replies View Related

Cant Get Past Boot Up Screen

Nov 4, 2009

I just put some more memory in my computer and now cant get past boot bios screen as I cant use keyboard to go past but I am guessing as usb is not active at this point keyboard or mouse does not work

View 9 Replies View Related

Freeze On Boot Screen

Mar 29, 2008

* When I start the system, it gets to the Vista's bootscreen (where you see the progress bar). At that point, the laptop freezes. In fact, it freezes before I can see the colored boxes in the progress-bar.

* If I force a cold shutdown (by holding down the power-button), and then restart the laptop, it might load fine and everything would be running fine (like there was never any problems).

* Assuming, it didn't freeze and loaded Vista successfully, then I would shutdown Vista through the Start button.

* If I try to start the laptop again, it will freeze at the bootscreen again.
* I cannot tell when it will freeze at the bootscreen..............

View 6 Replies View Related

Automatically Goes To Boot Screen

Mar 23, 2008

When I powerup my PC It automatically goes to the boot screen. I have to press F1 to get to get past it and to the password screen. I had to reformat my hard drive last month and its been doing that since then.

View 6 Replies View Related

32 Bit Black Screen On Boot.

Nov 18, 2008

I've had an issue with my computer booting properly. I went from a 1:05 boot time to over a 2:00 boot because Vista go's to a black screen instead of loading my desktop. I'm not sure where to start fixing this, I've always been good with computers and have tried all the text book fixes and I have no where left to go. I made a video which is uploading now and will be up incase this doesn't make as much sense as I'd hope. All my drivers are up to date.

View 7 Replies View Related

Boot Os Screen Fallback

Jun 5, 2008

After installing Vista Ultimate w/sp1 on my MacPro, the normal start up was to be presented with the choose the OS screen which included Vista Ultimate and also Vista Business (recovered). I have no idea where Vista Business came from, it was a clean install. My problem is that all of a sudden I don't get the choose the OS screen and it goes into fall back. It does finally boot and the desktop seems the same. My RC flight simulator wants me to enter all the serial numbers again, but everything else seems to work. It still claims to be Vista Ultimate. When I go to Control panel/System/advanced/Startup and recovery there is only one choice for the default startup OS. Vista Business (recovered). I haven't set any restore points (I will next time)

View 6 Replies View Related

Customized Boot Screen?

Oct 29, 2007

i have always wanted to get a customized boot screen and have tried amny screens but none of them look good on my screen resolution, i got a 1680 by 1050 screen and all the custom boot screens are stretched out. any1 know any good 1680 by 1050 vista boot screens?

View 5 Replies View Related

Dual Boot Screen Comes Up Both OS

Sep 14, 2009

For various reasons, I have a dual boot with Vista 64 bit and Vista 32 bit on separate internal hard drives. When the dual boot screen comes up, it lists both OS's as Microsoft Windows Vista, without any indication which is which and from which hard drive the OS is coming from. Is there any way to change the dual drive start up screen to be more specific as to which OS to select from?

View 4 Replies View Related

Change Boot Screen (32-bit Only)

Jan 17, 2007

There is finally an easy way (easier than before) to change your Windows Vista boot screen and use any high resolution photo as your boot screen.  Using a great tool written by Dan Smith it is now possible to automatically generate the replacement language MUI file that contains your boot image files. All you need is two photos at 800x600 and 1024x768 saved as 24-bit windows bitmaps. Then follow these steps:

Download Dan Smith's Vista Boot Logo Generator.

Install and then run from the link in the Start Menu.

Hit Browse for image and select both the 800x600 and 1024x768 resolution bitmap files for your boot screen.

Click on File and select Save Boot Screen File as and save your file.

Next, you will need to replace the winload.exe.mui file in c:WindowsSystem32en-us with the one you just created.  Before you copy in your new file, make a backup of the original. You will need to take ownership of all files in en-us as well as give your account file permissions to replace the file as well in order to copy the new winload.exe.mui file in.
 
The last step is to enable the alternative boot screen setting as shown in this tweak....

View 0 Replies View Related

Firefox 2 Or Firefox 3, How Does It Compare?

Jun 25, 2008

So whats better, firefox 2 or 3.. the Official release of Firefox 3 has came right.. it's already been released?? How does it compare.. I'm sick of using Firefox 1.. I never got 2. and I don't wanna use IE.. so I was just hoping to hear from a few people and see what you all think.. Post comments please...

View 9 Replies View Related

Black Screen When About To Boot Into Desktop?

Aug 2, 2008

i have a problem when vista is booting up past the loading bar screen sometimes not always the system kinda hangs when about to boot into desktop?, a mouse pointer appears and the screen is black for about 30-45 seconds then the vista circle icon appears then desktop loads? is this a known problem or just my system?

View 4 Replies View Related

Goes Off The Screen After Disk Check At Boot

May 6, 2008

Disk check at boot : Is there a way to stop that darn thing from going off the screen after it is done ? Maybe there is nothing to report, but I'd like to see what
is on that black/white screen at the end. You know, just one time?

View 5 Replies View Related

SP1 : Boot Screen Back To The Original

Mar 23, 2008

I have been using a different boot screen for awhile, with no issues. I updated to SP1 and everything seems to have went just fine. But it did, for some reason, change my boot screen back to the original. No big deal, I thought, I will just change it again. I did that, and it seemed to go fine until just now (a day later).

Now the boot screen once again is back to the factory boot screen, and I cannot get it to change to my custom. I can change the .mui file in the windows/system32/en-US folder (winload.exe.mui) with no problems. But when I restart, it is the factory boot screen.

View 5 Replies View Related

Arrow And Black Screen During Boot

Jun 8, 2008

When I try to boot my Vista laptop, it boots fine until after the green scrolling bar completes. Then, it goes to a black screen, then a darker shade, then a lighter shade of black. Then, an arrow appears. Nothing happens afterward. The screensaver will come on after a while. System restore doesn't fix it. What could I do or what could be the cause?

View 7 Replies View Related

How Get Rid Of The Boot Screen With OS Choice Option?

Jul 29, 2009

I installed Vista Home Premium upgrade as a dual boot with my original xp installation. Both are on separate hard drives. I now want to get rid of xp and use the hard drive for a Windows 7 machine I am building. Will this infringe the upgrade license? If this is okay, how do I get rid of the boot screen with OS choice option?

View 8 Replies View Related

Disc Boot X64, Black Screen

Nov 17, 2009

I have a boot issue since I got a Samsung SyncMaster 2233RZ, I have a black screen the first 30 second on startup, that is until I get to the login screen. I tried hitting the F11-F12 keys but I still just get a regular startup instead of boot from disc. How do I get to boot from the vista disc and what is wrong with my monitor, it can't be right it has to stand around and blink for 30 seconds..?

View 6 Replies View Related

During Boot Logo Comes Up At The Bottom Of The Screen

Mar 23, 2008

I am unsure what has caused my problem, so I was hoping someone may be able
to shed some light on it for me. I am running, Vista Business 32bit. Everything had been working fine, but without any changes to hardware, software or drivers I now have resolution problems. Firstly, when I boot my pc up it all goes well until just after the ???Windows Vista??? logo at the bottom of the screen comes up (during boot) the monitor goes into standby mode. Now the only way I have found to get my monitor out of this is to unplug the DVI cable from the back of my tower and plug in back in. The monitor then runs as normal ??? SO THATS ONE PROBLEM. Secondly, when the above problem first happened (and this is still happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my Video Card can easily handle this. (Which it had been doing). But now I can only achieve 1024 x 768.

View 6 Replies View Related

Boot Failure: Black Screen

Apr 27, 2010

Vista will not boot normally. I get to the black screen just before the Welcome, and then... nothing. Just a black screen. I CAN start in safe mode with networking, however. I disabled EVERYTHING in the msconfig startup, as well as all non-Microsoft service, to no avail. When I run ComboFix, I get the msg 'ComboFix is preparing to run', followed by 'Acess Denied. Administrator permissions are need to use the selected options. Use an administrator command prompt to complete these tasks'. I did right click on the CF icon on my desktop, and selected 'run as administrator' but got the same result. If I just let it run as is, I get the usual 'Scanning for infected files... This typically doesn't take more than 10 minutes, etc...', but NOTHING ever happens for at least 15 minutes after which ComboFix finally does start. However, while its running through the 50 stages, embedded in those stages is the occasional ''Access Denied. Administrator permissions are needed....". The completion of CF and subsequent restart did absolutely nothing to change the boot problem. I do have a MS Vista install disk, and I've run Startup repair. No change.....................

View 8 Replies View Related

Powerup PC Automatically Goes To The Boot Screen

Mar 26, 2008

When I powerup my PC It automatically goes to the boot screen. I have to press F1 to get to get past it and to the password screen. I had to reformat my hard drive last month and its been doing that since then.

View 6 Replies View Related

Slow Boot, Screen Is Going Blank?

Aug 17, 2008

I have a notebook with Windows Vista Home Premium 64-bit on it. The problem is that my boot is take a lot of time. First I get the BIOS screen with the Dell logo that is taking about 3 seconds (so that is good). But the loading bar is taking a lot of time. It is going from left to right for 13 times (This is not normal I think). After that, my screen is going blank for about 10 seconds and then I get a black screen with mouse cursor for about 10 seconds and then again a blank screen for 10 seconds (So a total of 30 seconds, which also not normal). After that I get the vista logo with the sound and the welcome screen, which is taking a long time (for about 25 seconds).

After that I get a blank screen for 20 seconds and then the desktop appears and from now on everything is running fine. So my question is: WHAT is causing this slow boot! I have already read the tutorial 'How to Speed Up Vista Boot Time' and did everyting they said. My startup programs are Kaspersky Internet Security and MSN Messenger. I have enabled superfetch and prefetch and set the registry value on 3. What else can I do to decrease the boot time?

View 6 Replies View Related

Not Boot Up, Black Screen Of Death

Dec 1, 2009

It just would not boot up after shuting off the computer. The system kicked into the black option screen where I selected to let Windows run a [forget the wording] restore function. It finally did restore the system. I thought it was caused by the automatic Sun Java update that I allowed to be installed just before that happened.

View 7 Replies View Related

Freezing On 1st Boot Desktop Screen

Mar 26, 2008

I have vista home premium The first time i turn on my comp each day vista freezes on desktop screen. I reboot and it fine. I looked in event viewer and the error which is happening when it freezes is to do with ACPI

Error message:IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 7, function 0. Please contact your system vendor for technical assistance. IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 6, function 0.

View 6 Replies View Related

Custom Splash Boot Screen

May 13, 2010

my school has asked me to make a splash screen that will boot up when we turn on the computer, is there any simple tutorials on how to do this for windows XP, not using software cause we have to make one custom image to clone on to all the PC's

View 4 Replies View Related

Boot Up Resulting Black Screen

May 15, 2010

im sure that AGES ago i saw a tutorial that told you how to disable the second monitor detection phase that some Vista PC's go through during boot up,resulting in a black screen that hung for about 20 seconds just before windows loads (i may well be making all this up. Im now win 7 and have an ATI card , both things are new to me and im experiancing an annoying 15 second black screen just before desktop loads. yes i know im asking for a vista tutorial to help with a win 7 issue but im sure it'll be the same and just to save anyone any time it is most definately NOT an ATI driver issue , this is 100% windows related and i remember solving the same issue for a friend with that tutorial on his Vista install a very very long time ago I had a quick look but it'll take me forever to find it (if it was here i did see it originally,im sure it is)

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved