Abit Airpace Wifi Network Adaptor And 64
Aug 7, 2007
Got a problem with the above wifi device. This is pci-e. Downloaded the 64 bit vista driver from the abit website (tried all three mirrors!) and the driver and piece of software install fine. But then the software won't recognise that the card exists ('could not find abit airpace wifi network adaptor' error) and vista says it cannot find a suitable driver. The device just shows as 'unknown device' in device manager and wants to reinstall driver. Has anyone else had this problem with this card and how did they resolve it, if at all?
View 8 Replies
ADVERTISEMENT
Mar 2, 2009
I just bought a copy of "Windows Vista Home Premium" Yesterday. Went home, and clean Installed it. (Yes, i wiped my data before hand. Backed up all my drivers, etc.) Things were going really well, until I try to connect to the internet and no dice. So I thought, ‘hey ok, I’ll just go throw my back up CD in, update the drivers.’ No dice. So I called around. I was told to plug my internet directly into my PC tower, etc etc. And nothing. They didn't know what to do, as usual, so I thought I would try to reset my modem and reinstall my internet. I have Verizon DSL. When I started the installation, I was told that My computer didn't have an Ethernet card, or whatever, and to try to connect using a USB cable. I know that whatever is up with my computer, can't be extremely bad.
This is ridiculous really. Before I wiped my hard drive, about Six hours before installing vista, everything worked. My internet ran on this computer, and the two laptops that are in the household are also STILL running with internet connection now. I can't find any drivers that are actually compatible with vista. And I’m sick of looking for a stupid Internet card model number on the inside of my tower. I actually had to use a little mirror to find the numbers because the card was that close to the side of the tower. But what I managed to find was "537epg". I try to look that up. Thought I finally hit gold, and found out that this download had been deleted from the manufactures database.
View 8 Replies
View Related
Mar 31, 2008
I have a problem with connecting Vista 64 Home Premium to wireless network. Hardware - tried D-Link DWL-G510 and Edimax 7128 adapters with newest Vista drivers I have 2 wifi networks broadcasted by Linksys WRT54G and Airlive WP-5460AP (latest firmware) - different channels set, both with WPA TKIP. Vista connects from time to time to Linksys but either only locally with no internet acces or with very poor internet transmission and then dropping connection. Connection to Airlive is rejected as wrong passphrase (although its correct). With no encryption only local connection to Airlive is possible. XP computers work with no problems with both devices.
View 5 Replies
View Related
Oct 20, 2009
My home is such that all my broadband to myPCs has to be wireless (the only place they could connect the cable was in an obscure, upstairs bedroom). In general this has worked just fine. I have 3 PCs currently connected to the network, One desktop and a laptop running XP and my new laptop running Vista (new is relative, I've been having this problem since January 2009 when I got the Vista laptop).
The two XP machines connect to the network just fine. Occasionally, when I work on the desktop, I'd see a notification icon that it has connected to the network, but in general I have no interruptions to my network connections. The Vista machine (Vista Ultimate, SP 2) is a nightmare. the WiFI connection keeps dropping. Additionally, often it would report that the network is connected, but in reality, nothing is reachable and I have to disconnect/connect to the network before any Internet site is reachable......
View 9 Replies
View Related
Mar 23, 2008
a friend has a new sony vaio with vista home premium installed. For some reason it will not connect to my netgear router wirelessly. I have tried everything. I am however not too hot on Vista as this is my first time with it. The adaptor says its on, but when you interegate it and ask why it wont connect it keeps telling me "switch on wireless adaptor capability". In the network connections it is on, the switch on the front right is swiitched on and the wireless network light on the front is on. The network is fine and working as i have my laptop connected to it. All security is present and entered. It seems to be the computer as it doesnt find any networks when there are loads in the area. Am i missing something exceptionally obvious? Does Vista have another "on" switch for this adaptor?
View 5 Replies
View Related
Oct 2, 2008
how to fix this driver. Toshiba Satellite Notepad m300/300. Windows installed driver software that supports the basic features of your Standard VGA Graphics Adapter. Its manufacturer may provide software that enables additional features.
Problem signature
Problem Event Name: PnPGenericDriverFound
Architecture: x86
Hardware Id: PCIVEN_1002&DEV_95C4&SUBSYS_FF501179&REV_00
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 3081
Extra information about the problem
Bucket ID: 96099954
View 9 Replies
View Related
Aug 30, 2008
I just got a Dell Utrasharp 2408WFP. I'm very pleased with the monitor but have read that, as it's an S-PVA panel, input lag will adversely affect games performance.
Also read, maybe on this forum, that a DVI to HDMI adapter will greatly improve things.
I have such an adapter cable.
Can anyone confirm that it would be better than the DVI to DVI I'm currently using?
I am connecting to a BFG 8800GTS OC 512MB which has 2 DVI ports so should I use it in addition or instead of the DVI to DVI?
View 8 Replies
View Related
Aug 16, 2009
I recently upgraded my graphics card from a Radeon 9600 to 3650 and that is where I struck problems. The standard VGA adaptor isn't working or became corrupt and when I installed the Radeon driver, the system froze after a short while. I have tried deleting adaptor, but that also removes "Display Adaptors" from the Device Manager, so even if I install the 3650 driver, it won't appear as installed. I have tried doing a clean install of Vista but the same thing occurs. On the other hand I have no problem with Windows 7 RC1 where everything works perfectly. What purpose does the VGA serve anyway since I still have a display without it working?
View 9 Replies
View Related
Feb 22, 2009
I don't know if this is the right group but a keyword search sent me here. For a long time now I've been getting windows on startup trying to install something that it says is an unidentified device, but on attempt to diagnose and or install I get the following:
This device is not configured correctly. (Code 1)A device attached to the system is not functioning.To reinstall the drivers for this device, click Reinstall Drive and gives it's value as *ISATAP network adaptor.So I uninstall it and after a restart or two I have to go through it all over again.If I leave device manager window open it shows a lot of activity trying to install this device so it is affecting performance.I don't have any new hardware other than a driver for a midi connection, but this issue predates that.
View 9 Replies
View Related
Mar 23, 2008
I recently purchased a new system with Vista Home Premium 32bit OS. I have a couple of hard drives (Maxtor) that I would like to recover some files from but when plugged into the new computer, they just don't register. Can't see anything when using IDE or have the hard drives on an adaptor for SATA. The old drives do have XP Pro on them. Is there a clash between OS? How can I read and recover the info I need? I have gone to the Microsoft site to make sure I have all the updates. I have gone to Maxtor to download the up to date installation software. Still nothing. I have checked the BIOS and the SATA ports are initiated (and have talked to the manufacturer HP about the issue and they can't see a problem). I have been able to recognize the old hard drives when I still had the old computer (cleaned it up and gave it to my son with a new hard drive installed). Would like to recover data and start using the old drives as a back up system.
View 4 Replies
View Related
Dec 26, 2008
Ive had a new PC for Xmas and its running Vista Home Premium 64Bit. Im looking for drivers for my wireless adaptor its a Invetel Wireless USB Adaptor (UR054g) Device Manager/Windows Picks it up as Cohiba 3887 Rev0
The company no longer supports this device, i remember they havent released a version for vista 32bit either, but i managed to get it working on Vista 32bit by using drivers for another wireless adaptor (I cant remember what one) If anyone has heard of this, knows any drivers that will work or has any they think might work please give me a link, ive been randomly trying different drivers all day, the closest i had it one that started to install but then i got an error saying the System Cannot find the specified file Here is a screenshot So if you know any drivers, have any to suggest or know what the above error means please post ASAP
View 7 Replies
View Related
Jun 23, 2008
I am a court reporter, hooked up via USB-serial adaptor to attorneys using a software called LiveNote to receive my steno translated into English. My Vista 8mth old computer has crashed 2X in the middle of the day with experts on the stand and on video. is this a vista issue or a hardware issue?
View 5 Replies
View Related
Sep 27, 2009
Im using Vista home premium, at my previous install it recognize my Sandisk 8gb Micro sdhc card w/ Adaptor, and everything is fine. But afterward got some proglem, so i have to re-install the vista. And this time, computer recognize my drive. But wont let me use it until I format it. (i can open it but nothing in there) and i get the message:"You need to format the disk in drive x before you can use it."
And yes i try everything i could,install the flash driver from texas instrument and windows sd card roll up package, or even restart the comp with sd card in it. verything! I have all my pics in there and tons of important Documents. I am so frustrated right now. Cause i dont wanna format sd card to lose all my pics in there and docs
View 5 Replies
View Related
Apr 1, 2009
A while back I had wi fi working on my laptop. The problem I have now is that I had to reload and start over because of numerous infections (trojans, & viruses & malware etc.). I have a Netgear router with setup information that was previously installed. I went into Control Panel / Network connections And tried to activate wireless network connect 3 and it said acquiring network address Intel(R) Pro/wireless 3945ABG Network Connection. I chose /clicked on the network I had previously installed and clicked on Connect.
The wireless network connection box came up and asked me for the network key. It already had a blanked out key in the 2 boxes so I clicked on connect and it scanned and said acquiring network address. The problem is that it never acquires the address and puts a red X on the icon by the clock.
View 5 Replies
View Related
Jul 30, 2009
A laptop running Vista is having the following problems:
1. Can't connect to WiFi
2. Can't launch system restore
3. Can't launch WIndows help
4. Can't launch Event Viewer
The last time it was working fine, a Windows update was installed and the system was shut down probably. The next time it was rebooted, the problems above occurred.
View 4 Replies
View Related
Aug 12, 2009
I have a Vista Ultimate laptop which I used for work in the US. Now I live in Germany. During my initial stay at the hotels, I used the hotel wireless connection and Vista connected to the Internet fine. Now I live in an apartment and got the DSL service from T-Mobile (Deutsche Telekom) and here is the problem. The DSL phone works fine. My Vista will not connect to the DSL router (Speedport 303V).
1.Every attempt to use the browser (Firefox or IE) to connect to the router?s IP address returns the following error message: Connection Interrupted The connection to the server was reset while the page was loading. The network link was interrupted while negotiating a connection. Please try again.
2.None of the external web sites can be accessed
3.The network configuration information from the Control Panel says I am connected to the Internet and the only application working is Skype.
4.My wife has an Apple laptop. She could connect to the router and the Internet from the beginning of this DSL setup.
One thing I did change in the Wireless card settings was the DNS servers. Soon after I added DNS servers from OpenDNS, and I have access to the Internet. I am still not able to connect to my DSL router. I disabled IPV6 for the interfaces and tried to use wired and WiFi access to the router and Vista will not access the router. Every other place I have used WiFi connection, DSL or Cable broadband, I
had no problem. This is the first time I am experiencing this.
View 7 Replies
View Related
Apr 13, 2009
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS.
I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. When I click on the "Connect to" in the start menu, nothing happens. When I click on "connect to a network" in control panel, I get an error loading wizards message saying module not found. The card is an Inrel pro wireless 3945ABG and IS turned on. All critical windows updates have been installed.
View 5 Replies
View Related
Nov 21, 2008
I got a HP dv6000 and I am having a problemo! Its a newish computer. I bought it nearly new off ebay, and I put vista on it. Vista works and all but it only recognizes the dial up port. The computer has wifi and an ethernet port but it will not detect any network.
View 6 Replies
View Related
Mar 24, 2008
After upgrading to SP1 my wifi connection keeps disconnecting and reconnecting about once every ten minutes or so .... I'm using WPA-Personal security and I have disabled power management for the nic.
View 6 Replies
View Related
Oct 5, 2009
Like the rest of the people when I travel and hook up to WIFI I can not send an e-mail - I get the address error What's up with that ? In scaning thru the list of messages you would think somewhere Window's would have sent a solution. This is driving me crazy !
View 5 Replies
View Related
Jul 12, 2009
My WiFi did not connect automatically to my home network which I had recently added as a favourite network. I typed in the password and it connected. I then went to my network list and noticed that the network had been removed unknowingly, after noticing this, I then tried adding the network manually and guess what, it showed me access denied. Why is this happening? I am the system administrator and it is still showing me access denied.
View 8 Replies
View Related
Jun 5, 2008
Running Vista Enterprise x86 SP1 with all updates applied as per Windows Update. Machine is a HP 6910p with Intel Wifi Link 4965AGN. All power saving disabled where possible; power management running max performance. Router is Linksys WRT54GS v2 with latest firmware from Linksys installed. SSID broadcast disabled. Connecting using WPA-2 personal, AES encryption. Have a few other notebooks (Tosh, HP, Dell) and all work without problems but they are all running XP. This current problematic notebook runs fine if I boot to XP.
Problem: with no discernable pattern, the Wifi connection would be lost and cannot reconnect even though the network is visible (shows up as unnamed). Tried IPConfig renew, right-click diagnose & repair, disable/reenable (from network setting and soft-button on notebook) and reboot. Nothing helps.
Simple solution: click on the network and provide the correct SSID and Passphrase, all is well again. Of course, each time I do this, it's a new Wifi network registration so I end up with 6-10 every week that I need to clean up (mywifinet, mywifinet 2, mywifinet 2 3, mywifinet 2 3 5, etc...). They're all connected to the same thing but everytime it dies, the same setting will not reconnect and I have to register all over again. Registration is standard and set to remember and auto connect. This isn't my only problem with Vista but it is the most annoying. Why, why, why does Vista hate me?
View 4 Replies
View Related
Oct 20, 2009
i have this HP compaq presario CQ60 and any time i try to download anything over a few KB, the download fails. This happens during all updates, winupdates,antivirus updates, network file transfers ect.. Basically any downloads. I have no problem when using a LAN connection its only wifi when i have the problem. I have attemted forum searches on microsofts website to no avail , google, bing ect have nothing even close to the results im looking for, all my drivers are up to date.
Atheros 802.11b/g WLAN. Microprocessor2.10 GHz AMD Sempron SI-42 ProcessorMicroprocessor Cache512KB L2 CacheMemory3072MBMemory Max4096MBVideo GraphicsNVIDIA GeForce 8200MVideo MemoryUp to 1407MBHard Drive160GB (5400RPM)Multimedia DriveSuperMulti 8X DVD±R/RW with Double Layer SupportDisplay15.6" Diagonal High Definition HP BrightView Display (1366x768)Fax/ModemHigh speed 56k modemNetwork CardIntegrated 10/100 Ethernet LANWireless Connectivity802.11b/g WLAN
View 4 Replies
View Related
Nov 25, 2009
I have a Vista laptop which connects via wifi to my home network router and I can access all the PCs and Printers and internet no problem. I now have to do some work away from home and will purchase a USB Broadband modem which will give me mobile internet/email, but I will still want to move files and print when at home.
If I have my USB Modem and my Wifi enabled at the same time, can I access the Internet via the USB Modem, while accessing the PCs and Printers at home? How would my laptop know to access the Internet via the dongle modem and not through the router and modem on the home network?
View 4 Replies
View Related
Sep 11, 2009
I have two PCI wireless network cards from two different brands, Netgear WG311V2 and D-Link DWl-G520+. My Vista Ultimate 32-bit SP2 system has 4GB of RAM. Neither will detect wireless networks when the system RAM is greater than 2GB. If I pull out one 2GB stick, it works fine. Put it back in, failure to see networks. I tried the Netgear on a Windows 2003 Standard 32 bit SP2 with 4GB of RAM and it worked ok.
View 9 Replies
View Related
Jan 27, 2010
i run the internet through my wifi, the service is provided by the apartment complex to everyone. it is an incredibly strong signal for the whole building, and i am right beneath the source so i have always had just an amazing speed on my internet. the other day, while chatting on facebook of all places, something happened (what i do not know) and the firefox crashed. since that moment the internet has been chugging. and i mean chugging! it takes almost 2min just to load a page. (this is not consistent however some pages load faster) downloading speeds have all but stopped (i don't know how to check for just how fast they are going) i can't even load up Internet videos now its so slow.
i tried several fixes for the problem, but being a noob i think i screwed it up worse because its even slower than before. first i used uniblue registry cleaner and speed upper thing. they just screwed up my computer even worse and it was taking forever just to open a file folder let along load a webpage. i did a system restore to undue that damage. i tried resetting the autotuning. that did not work i even did an ipconfig/renew release thing. that almost did me in. i finally got the internet running again. still slow.
View 5 Replies
View Related
Aug 1, 2009
how to restore the wifi icon in the taskbar? I have vista home premium on an HP laptop. It was there this morning, and now, when i turned it on, its gone. I right clicked on the taskbar, then left clicked on properties, found the notification area, and the network square is grayed out so I can't put a check in it. I think that is what would put the icon back next to the battery icon.
View 5 Replies
View Related
May 19, 2009
A while ago I bought a ASUS F3Tc and with it I got Vista: Home Premium. So, connecting to a wifi/wlan is no problem at all. But after a while the connection dies, no matter which network I connect to. Even if I sit 2 inches from the wireless router I get disconnectet after a short while.. And that is really bothering me.. because I'm a web-developer, and I have to have a stable connection to the internet. I know that there are alot of other people who have got the same problem as me.. And that is only with Vista. Cause if I install Linux on my laptop, the wifi is stable. And it doesn't disconnect at all.
View 6 Replies
View Related
Mar 23, 2008
I have this in my registry, and since when Vista flubs wifi connections it sometimes comes up with a 169.... (though can't recollect if it is precisely 169.254.183.232) address (via ipconfig) I wondered whether this was the cause. What is it, where did it come from, do I need it, (how) can I get rid of it?..............
View 4 Replies
View Related
Mar 23, 2008
problem with their wifi after logging back in from being away for a while? It won't connect or even detect any networks. If I restart the laptop it will connect properly. Is there anyway for it to work
without restarting?
View 4 Replies
View Related
Mar 23, 2008
How do I force Vista to do what it should be doing anyway, i.e. get new TCP/IP settings when it connects to a new access point (with different SSID, WEP key, channel no) Vista (HP) certainly does not do it automatically... ipconfig /all shows IP address of previous access point... and previous gateway/DNS. "Repair" usually resolves the issue but it shouldn't be necessary. DHCP client is on; IPv6 is off; all current updates applied. Access point that Vista will not connect to properly is a Netgear WPN824 Firmware V2.0.15_1.0.11; DHCP on LAN Port ON (i.e. is LAN DHCP server)
View 4 Replies
View Related
