Wifi Did Not Connect Automatically
Jul 12, 2009
My WiFi did not connect automatically to my home network which I had recently added as a favourite network. I typed in the password and it connected. I then went to my network list and noticed that the network had been removed unknowingly, after noticing this, I then tried adding the network manually and guess what, it showed me access denied. Why is this happening? I am the system administrator and it is still showing me access denied.
View 8 Replies
ADVERTISEMENT
Mar 23, 2008
How do I force Vista to do what it should be doing anyway, i.e. get new TCP/IP settings when it connects to a new access point (with different SSID, WEP key, channel no) Vista (HP) certainly does not do it automatically... ipconfig /all shows IP address of previous access point... and previous gateway/DNS. "Repair" usually resolves the issue but it shouldn't be necessary. DHCP client is on; IPv6 is off; all current updates applied. Access point that Vista will not connect to properly is a Netgear WPN824 Firmware V2.0.15_1.0.11; DHCP on LAN Port ON (i.e. is LAN DHCP server)
View 4 Replies
View Related
Jul 30, 2009
A laptop running Vista is having the following problems:
1. Can't connect to WiFi
2. Can't launch system restore
3. Can't launch WIndows help
4. Can't launch Event Viewer
The last time it was working fine, a Windows update was installed and the system was shut down probably. The next time it was rebooted, the problems above occurred.
View 4 Replies
View Related
Mar 31, 2008
I have a problem with connecting Vista 64 Home Premium to wireless network. Hardware - tried D-Link DWL-G510 and Edimax 7128 adapters with newest Vista drivers I have 2 wifi networks broadcasted by Linksys WRT54G and Airlive WP-5460AP (latest firmware) - different channels set, both with WPA TKIP. Vista connects from time to time to Linksys but either only locally with no internet acces or with very poor internet transmission and then dropping connection. Connection to Airlive is rejected as wrong passphrase (although its correct). With no encryption only local connection to Airlive is possible. XP computers work with no problems with both devices.
View 5 Replies
View Related
Mar 23, 2008
problem with their wifi after logging back in from being away for a while? It won't connect or even detect any networks. If I restart the laptop it will connect properly. Is there anyway for it to work
without restarting?
View 4 Replies
View Related
May 21, 2009
I am running Vista x64 on a wireless network, WPA, TKIP. The network connects and works fine when you connect manually, but even if you check the "automatically connect" checkbox, after turning off the computer you have to connect manually again and the checkbox is unchecked. Had an XP machine with wireless before and this was never a problem. Have a Vista x32 connected with Ethernet cable that has no problem getting on network automatically either. Router is WRT54GS (I know it's old), but my computer is not totally incompatible if I get a good connection and good speed on the network. Seems that I am not the only one having this problem on this forum, but the other cases seemed somewhat different?
View 5 Replies
View Related
May 6, 2008
I want to connect to my broadband Internet connection automatically whenever my system starts up. In XP I did this by creating a shortcut to the connection and placing it in the startup menu. However, Vista Home Premium apparently does not allow me to create a shortcut to an Internet connection. When I right-click on the connection, the menu offers only Disconnect, Status and Properties. The equivalent menu in XP included the option to Create Shortcut. how to launch a connection at startup in Vista? Or is this another of the simple conveniences that Microsoft has decided to make impossible?
View 9 Replies
View Related
Jun 22, 2009
Not able to find wireless networks automatically even if the option 1) connect automatically to the network in this range is enabled during the startup ,the selection made is not remembered and it is not able to find the network.
View 5 Replies
View Related
Apr 22, 2009
How to make a "Connect automatically" check mark stay in a "Dial-up Connection" window? The "Connect to:" field is "ADSL".The check mark disappears after a hibernation or restart. I have to check the "Connect automatically" and click "Connect" every time after a hibernation or restart to resume the internet connection.
View 9 Replies
View Related
Jul 5, 2008
i select "connect automatically" and the setting is not saved. It hasn't yet connected automatically
View 5 Replies
View Related
Apr 1, 2009
A while back I had wi fi working on my laptop. The problem I have now is that I had to reload and start over because of numerous infections (trojans, & viruses & malware etc.). I have a Netgear router with setup information that was previously installed. I went into Control Panel / Network connections And tried to activate wireless network connect 3 and it said acquiring network address Intel(R) Pro/wireless 3945ABG Network Connection. I chose /clicked on the network I had previously installed and clicked on Connect.
The wireless network connection box came up and asked me for the network key. It already had a blanked out key in the 2 boxes so I clicked on connect and it scanned and said acquiring network address. The problem is that it never acquires the address and puts a red X on the icon by the clock.
View 5 Replies
View Related
Aug 12, 2009
I have a Vista Ultimate laptop which I used for work in the US. Now I live in Germany. During my initial stay at the hotels, I used the hotel wireless connection and Vista connected to the Internet fine. Now I live in an apartment and got the DSL service from T-Mobile (Deutsche Telekom) and here is the problem. The DSL phone works fine. My Vista will not connect to the DSL router (Speedport 303V).
1.Every attempt to use the browser (Firefox or IE) to connect to the router?s IP address returns the following error message: Connection Interrupted The connection to the server was reset while the page was loading. The network link was interrupted while negotiating a connection. Please try again.
2.None of the external web sites can be accessed
3.The network configuration information from the Control Panel says I am connected to the Internet and the only application working is Skype.
4.My wife has an Apple laptop. She could connect to the router and the Internet from the beginning of this DSL setup.
One thing I did change in the Wireless card settings was the DNS servers. Soon after I added DNS servers from OpenDNS, and I have access to the Internet. I am still not able to connect to my DSL router. I disabled IPV6 for the interfaces and tried to use wired and WiFi access to the router and Vista will not access the router. Every other place I have used WiFi connection, DSL or Cable broadband, I
had no problem. This is the first time I am experiencing this.
View 7 Replies
View Related
Apr 13, 2009
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS.
I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. When I click on the "Connect to" in the start menu, nothing happens. When I click on "connect to a network" in control panel, I get an error loading wizards message saying module not found. The card is an Inrel pro wireless 3945ABG and IS turned on. All critical windows updates have been installed.
View 5 Replies
View Related
Nov 21, 2008
I got a HP dv6000 and I am having a problemo! Its a newish computer. I bought it nearly new off ebay, and I put vista on it. Vista works and all but it only recognizes the dial up port. The computer has wifi and an ethernet port but it will not detect any network.
View 6 Replies
View Related
Mar 24, 2008
After upgrading to SP1 my wifi connection keeps disconnecting and reconnecting about once every ten minutes or so .... I'm using WPA-Personal security and I have disabled power management for the nic.
View 6 Replies
View Related
Oct 5, 2009
Like the rest of the people when I travel and hook up to WIFI I can not send an e-mail - I get the address error What's up with that ? In scaning thru the list of messages you would think somewhere Window's would have sent a solution. This is driving me crazy !
View 5 Replies
View Related
Jun 5, 2008
Running Vista Enterprise x86 SP1 with all updates applied as per Windows Update. Machine is a HP 6910p with Intel Wifi Link 4965AGN. All power saving disabled where possible; power management running max performance. Router is Linksys WRT54GS v2 with latest firmware from Linksys installed. SSID broadcast disabled. Connecting using WPA-2 personal, AES encryption. Have a few other notebooks (Tosh, HP, Dell) and all work without problems but they are all running XP. This current problematic notebook runs fine if I boot to XP.
Problem: with no discernable pattern, the Wifi connection would be lost and cannot reconnect even though the network is visible (shows up as unnamed). Tried IPConfig renew, right-click diagnose & repair, disable/reenable (from network setting and soft-button on notebook) and reboot. Nothing helps.
Simple solution: click on the network and provide the correct SSID and Passphrase, all is well again. Of course, each time I do this, it's a new Wifi network registration so I end up with 6-10 every week that I need to clean up (mywifinet, mywifinet 2, mywifinet 2 3, mywifinet 2 3 5, etc...). They're all connected to the same thing but everytime it dies, the same setting will not reconnect and I have to register all over again. Registration is standard and set to remember and auto connect. This isn't my only problem with Vista but it is the most annoying. Why, why, why does Vista hate me?
View 4 Replies
View Related
Oct 20, 2009
i have this HP compaq presario CQ60 and any time i try to download anything over a few KB, the download fails. This happens during all updates, winupdates,antivirus updates, network file transfers ect.. Basically any downloads. I have no problem when using a LAN connection its only wifi when i have the problem. I have attemted forum searches on microsofts website to no avail , google, bing ect have nothing even close to the results im looking for, all my drivers are up to date.
Atheros 802.11b/g WLAN. Microprocessor2.10 GHz AMD Sempron SI-42 ProcessorMicroprocessor Cache512KB L2 CacheMemory3072MBMemory Max4096MBVideo GraphicsNVIDIA GeForce 8200MVideo MemoryUp to 1407MBHard Drive160GB (5400RPM)Multimedia DriveSuperMulti 8X DVD±R/RW with Double Layer SupportDisplay15.6" Diagonal High Definition HP BrightView Display (1366x768)Fax/ModemHigh speed 56k modemNetwork CardIntegrated 10/100 Ethernet LANWireless Connectivity802.11b/g WLAN
View 4 Replies
View Related
Nov 25, 2009
I have a Vista laptop which connects via wifi to my home network router and I can access all the PCs and Printers and internet no problem. I now have to do some work away from home and will purchase a USB Broadband modem which will give me mobile internet/email, but I will still want to move files and print when at home.
If I have my USB Modem and my Wifi enabled at the same time, can I access the Internet via the USB Modem, while accessing the PCs and Printers at home? How would my laptop know to access the Internet via the dongle modem and not through the router and modem on the home network?
View 4 Replies
View Related
Sep 11, 2009
I have two PCI wireless network cards from two different brands, Netgear WG311V2 and D-Link DWl-G520+. My Vista Ultimate 32-bit SP2 system has 4GB of RAM. Neither will detect wireless networks when the system RAM is greater than 2GB. If I pull out one 2GB stick, it works fine. Put it back in, failure to see networks. I tried the Netgear on a Windows 2003 Standard 32 bit SP2 with 4GB of RAM and it worked ok.
View 9 Replies
View Related
Oct 20, 2009
My home is such that all my broadband to myPCs has to be wireless (the only place they could connect the cable was in an obscure, upstairs bedroom). In general this has worked just fine. I have 3 PCs currently connected to the network, One desktop and a laptop running XP and my new laptop running Vista (new is relative, I've been having this problem since January 2009 when I got the Vista laptop).
The two XP machines connect to the network just fine. Occasionally, when I work on the desktop, I'd see a notification icon that it has connected to the network, but in general I have no interruptions to my network connections. The Vista machine (Vista Ultimate, SP 2) is a nightmare. the WiFI connection keeps dropping. Additionally, often it would report that the network is connected, but in reality, nothing is reachable and I have to disconnect/connect to the network before any Internet site is reachable......
View 9 Replies
View Related
Jan 27, 2010
i run the internet through my wifi, the service is provided by the apartment complex to everyone. it is an incredibly strong signal for the whole building, and i am right beneath the source so i have always had just an amazing speed on my internet. the other day, while chatting on facebook of all places, something happened (what i do not know) and the firefox crashed. since that moment the internet has been chugging. and i mean chugging! it takes almost 2min just to load a page. (this is not consistent however some pages load faster) downloading speeds have all but stopped (i don't know how to check for just how fast they are going) i can't even load up Internet videos now its so slow.
i tried several fixes for the problem, but being a noob i think i screwed it up worse because its even slower than before. first i used uniblue registry cleaner and speed upper thing. they just screwed up my computer even worse and it was taking forever just to open a file folder let along load a webpage. i did a system restore to undue that damage. i tried resetting the autotuning. that did not work i even did an ipconfig/renew release thing. that almost did me in. i finally got the internet running again. still slow.
View 5 Replies
View Related
Aug 1, 2009
how to restore the wifi icon in the taskbar? I have vista home premium on an HP laptop. It was there this morning, and now, when i turned it on, its gone. I right clicked on the taskbar, then left clicked on properties, found the notification area, and the network square is grayed out so I can't put a check in it. I think that is what would put the icon back next to the battery icon.
View 5 Replies
View Related
May 19, 2009
A while ago I bought a ASUS F3Tc and with it I got Vista: Home Premium. So, connecting to a wifi/wlan is no problem at all. But after a while the connection dies, no matter which network I connect to. Even if I sit 2 inches from the wireless router I get disconnectet after a short while.. And that is really bothering me.. because I'm a web-developer, and I have to have a stable connection to the internet. I know that there are alot of other people who have got the same problem as me.. And that is only with Vista. Cause if I install Linux on my laptop, the wifi is stable. And it doesn't disconnect at all.
View 6 Replies
View Related
Mar 23, 2008
I have this in my registry, and since when Vista flubs wifi connections it sometimes comes up with a 169.... (though can't recollect if it is precisely 169.254.183.232) address (via ipconfig) I wondered whether this was the cause. What is it, where did it come from, do I need it, (how) can I get rid of it?..............
View 4 Replies
View Related
Aug 7, 2007
Got a problem with the above wifi device. This is pci-e. Downloaded the 64 bit vista driver from the abit website (tried all three mirrors!) and the driver and piece of software install fine. But then the software won't recognise that the card exists ('could not find abit airpace wifi network adaptor' error) and vista says it cannot find a suitable driver. The device just shows as 'unknown device' in device manager and wants to reinstall driver. Has anyone else had this problem with this card and how did they resolve it, if at all?
View 8 Replies
View Related
Apr 15, 2009
im at an rv campground with wifi i can recieve email but not send while at home no problems, it is a pop 3 account error message;
The connection to the server has failed. Subject 'Fw: Losing a Friend....', Account: 'mail.cableone.net', Server: 'mail.cableone.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 4 Replies
View Related
Feb 3, 2009
I have never run into this before. I have a dsl modem/gateway (actiontec) which i use to connect to the internet. when I connected a Linksys WRT54G v.4 router to my laptop thru RJ45, WITH wifi disabled on the router, I lose connectivity to the internet on the wifi connection.
I'm used to XP with independent connectoids. Looking at the properties on each connection, they appear to be correct. Has anyone run into this on Vista? I thought surely by disco'g the wifi on the Linksys Router it should just be a standard wired connection. both routers are setup for DHCP. Is that what's confusing Vista?
View 5 Replies
View Related
Sep 16, 2009
I certain its a hardware issue but i was just curious. don't they both broadcast on the 802.11 band (is it called a band?)? so why wouldn't they be capable of either or? (i know bluetooth uses smaller wave lengths and wifi larger, that much i do know) it would probably be impractical to try wifi on bluetooth band as you would get severely reduced performance. but why not bluetooth on wifi band?
View 4 Replies
View Related
Feb 6, 2009
My set-up is very simple yet I cannot connect to a device. I have a Router which has three connections via ethernet.
1. Vista Machine
2. XP Machine
3. Music Server (systemline)
The problem I have is that my Vista machine will not connect to the music server - I cannot see the shared folders. My XP machine connects to it no problem, e.g. if I enter the location (
View 9 Replies
View Related
May 3, 2010
No problem sending emails from home, McD's wifi, Starbucks, etc. but can't send from some motels.
View 9 Replies
View Related
