Like the rest of the people when I travel and hook up to WIFI I can not send an e-mail - I get the address error What's up with that ? In scaning thru the list of messages you would think somewhere Window's would have sent a solution. This is driving me crazy !
View 5 RepliesNo problem sending emails from home, McD's wifi, Starbucks, etc. but can't send from some motels.
View 9 Replies View RelatedI am not able to send a invitation for a meeting. Furthermore I am not able to send this meeting by e-mail. Furthermore I do not want to register for any support community in the world wide web to get a solution for such a business critical issue. what can cause that I am no longer able to send meetings by E-Mail or to send invitations.
View 7 Replies View RelatedIs it absolutely necessary to create a Comcast account in order to send mail? I am having an issue after recently obtaining Comcast as my ISP (i am receiving mail but unable to send). I am formerly a bellsouth.net customer, but would like to continue using Windows mail. I have read and followed several different threads and nothing is working...I am connceted to the internet wirelessly..did not have to install Comcast cd....email scanning is off...what else can I try?
View 9 Replies View RelatedI want to send e-mail to a group and hide the e-mail addresses. How do I do this?
View 8 Replies View RelatedA while back I had wi fi working on my laptop. The problem I have now is that I had to reload and start over because of numerous infections (trojans, & viruses & malware etc.). I have a Netgear router with setup information that was previously installed. I went into Control Panel / Network connections And tried to activate wireless network connect 3 and it said acquiring network address Intel(R) Pro/wireless 3945ABG Network Connection. I chose /clicked on the network I had previously installed and clicked on Connect.
The wireless network connection box came up and asked me for the network key. It already had a blanked out key in the 2 boxes so I clicked on connect and it scanned and said acquiring network address. The problem is that it never acquires the address and puts a red X on the icon by the clock.
A laptop running Vista is having the following problems:
1. Can't connect to WiFi
2. Can't launch system restore
3. Can't launch WIndows help
4. Can't launch Event Viewer
The last time it was working fine, a Windows update was installed and the system was shut down probably. The next time it was rebooted, the problems above occurred.
I'm trying to set up my yahoo mail in windows mail, and i've successfully recieved mail into my inbox, but I am unable to send mail out. When I try I run in to this error message: The host 'smtp' could not be found. Please verify that you have entered the server name correctly. Subject 'test', Account: 'Windows Mail', Server: 'smtp', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D
View 9 Replies View RelatedHave contacted internet provider and was told that the Windows Mail program was corrupted, and that I should reinstall the software.
View 9 Replies View RelatedI use orange as my IPS and have an e-mail address xxx.xxx@fsmail.net which I
can access ok from webmail. I have set up my account in Windows mail and I
can send e-mail ok but I cannot recieve mail. I get the error message below.
I hope you can help. I don't want to change ISP or e-mail address if I can
help it as I would like to be able to access my e-mail via mobile phone or
blackberry.
When I try to send mail with Windows Mail, I get the following message: You do not have a digital ID. If you send this message, it will be sent properly, but you will not be able to read it in your sent items folder. Send anyway? When Windows Mail is open, and I go to Tools> Options> Security> Digital IDs> Personal> nothing is there. Above this is a choice of Intended Purposes. I have selected ALL. If I click on the Import> Welcome to Certificate Import Wizard> Next> I am asked for a file name. I don't know the name of the file name. Alternatively, I can click the BROWSE button. I don't know where to look for the certificate in my files. Whereas I don't know the name of the file, I can neither type it in where requested, nor use my computer file search function to locate it in my files.
View 9 Replies View RelatedI think it's the server port number, but not sure what it should be. Here is the error message I got.
The connection to the server has failed. Subject
'test', Account: 'mail.comcast.net', Server: 'smtp.comcast.net', Protocol:
SMTP, Port: 325, Secure(SSL): Yes, Socket Error: 10060, Error Number:
0x800CCC0E
Is there a way that someone with ATT, SBCGLOBAL as their internet provider can set up Windows Mail to send and receive e-mail?
View 5 Replies View RelatedI just added windows live mail to my windows vista mail and I can send but cant get it to receive mail. THis is the error message i keep getting... Account: 'pop3.live.com', Server: 'pop3.live.com', Protocol: POP3, Server Response: '-ERR command not implemented', Port: 995, Secure(SSL): Yes, Serve Error: 0x800CCC90, Error Number: 0x800CCC18
View 5 Replies View RelatedUsing windows mail I can send email but cannot receive email any more. When sending and receiving begins to download emails but gets to 3 and then hangs. After a while a box then opens asking for user name and password. Then hangs for circa 10 - 20 seconds and same box then opens asking for user name and password again. If I select stop then error message arises - Account: 'pop3.demon.co.uk', Server: 'pop3.demon.co.uk', Protocol: POP3, Server Response: '-ERR [IN-USE] could not lock maildrop; is there another connection active?', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92
View 7 Replies View RelatedI can not send and receive any e-mail. these are the errors that keeps giving me. What seems to be the problem? The connection to the server has failed. Account: 'pop-server.socal.rr.com', Server: 'pop-server.socal.rr.com', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 10061, Error Number: 0x800CCC0E
The connection to the server has failed. Subject 'test', Account: 'pop- server.socal.rr.com', Server: 'SMTP-server.socal.rr.com', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10061, Error Number: 0x800CCC0E
I can receive emails, but not send. I get this error message: Subject 'test', Account: 'pop3.live.com', Server: 'smtp.live.com', Protocol: SMTP, Server Response: '250 OK', Port: 25, Secure(SSL): Yes, Server Error: 250, Error Number: 0x800CCC7D
View 7 Replies View RelatedI try to send mail from my laptop but it displays this message: a server error occurred and your mail could not be sent (102) when i log on from any other computer it seems to work and let me send mail. i tried restoring my computer and changing browsers but still same error message occurs.
View 8 Replies View RelatedSince I have a new pc with Windows Vista I I can only send mail after I start or restart my pc. I can receive mail.
View 4 Replies View RelatedI have a Vista Ultimate laptop which I used for work in the US. Now I live in Germany. During my initial stay at the hotels, I used the hotel wireless connection and Vista connected to the Internet fine. Now I live in an apartment and got the DSL service from T-Mobile (Deutsche Telekom) and here is the problem. The DSL phone works fine. My Vista will not connect to the DSL router (Speedport 303V).
1.Every attempt to use the browser (Firefox or IE) to connect to the router?s IP address returns the following error message: Connection Interrupted The connection to the server was reset while the page was loading. The network link was interrupted while negotiating a connection. Please try again.
2.None of the external web sites can be accessed
3.The network configuration information from the Control Panel says I am connected to the Internet and the only application working is Skype.
4.My wife has an Apple laptop. She could connect to the router and the Internet from the beginning of this DSL setup.
One thing I did change in the Wireless card settings was the DNS servers. Soon after I added DNS servers from OpenDNS, and I have access to the Internet. I am still not able to connect to my DSL router. I disabled IPV6 for the interfaces and tried to use wired and WiFi access to the router and Vista will not access the router. Every other place I have used WiFi connection, DSL or Cable broadband, I
had no problem. This is the first time I am experiencing this.
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS.
I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. When I click on the "Connect to" in the start menu, nothing happens. When I click on "connect to a network" in control panel, I get an error loading wizards message saying module not found. The card is an Inrel pro wireless 3945ABG and IS turned on. All critical windows updates have been installed.
I got a HP dv6000 and I am having a problemo! Its a newish computer. I bought it nearly new off ebay, and I put vista on it. Vista works and all but it only recognizes the dial up port. The computer has wifi and an ethernet port but it will not detect any network.
View 6 Replies View RelatedI have a problem with connecting Vista 64 Home Premium to wireless network. Hardware - tried D-Link DWL-G510 and Edimax 7128 adapters with newest Vista drivers I have 2 wifi networks broadcasted by Linksys WRT54G and Airlive WP-5460AP (latest firmware) - different channels set, both with WPA TKIP. Vista connects from time to time to Linksys but either only locally with no internet acces or with very poor internet transmission and then dropping connection. Connection to Airlive is rejected as wrong passphrase (although its correct). With no encryption only local connection to Airlive is possible. XP computers work with no problems with both devices.
View 5 Replies View RelatedAfter upgrading to SP1 my wifi connection keeps disconnecting and reconnecting about once every ten minutes or so .... I'm using WPA-Personal security and I have disabled power management for the nic.
View 6 Replies View RelatedMy WiFi did not connect automatically to my home network which I had recently added as a favourite network. I typed in the password and it connected. I then went to my network list and noticed that the network had been removed unknowingly, after noticing this, I then tried adding the network manually and guess what, it showed me access denied. Why is this happening? I am the system administrator and it is still showing me access denied.
View 8 Replies View RelatedRunning Vista Enterprise x86 SP1 with all updates applied as per Windows Update. Machine is a HP 6910p with Intel Wifi Link 4965AGN. All power saving disabled where possible; power management running max performance. Router is Linksys WRT54GS v2 with latest firmware from Linksys installed. SSID broadcast disabled. Connecting using WPA-2 personal, AES encryption. Have a few other notebooks (Tosh, HP, Dell) and all work without problems but they are all running XP. This current problematic notebook runs fine if I boot to XP.
Problem: with no discernable pattern, the Wifi connection would be lost and cannot reconnect even though the network is visible (shows up as unnamed). Tried IPConfig renew, right-click diagnose & repair, disable/reenable (from network setting and soft-button on notebook) and reboot. Nothing helps.
Simple solution: click on the network and provide the correct SSID and Passphrase, all is well again. Of course, each time I do this, it's a new Wifi network registration so I end up with 6-10 every week that I need to clean up (mywifinet, mywifinet 2, mywifinet 2 3, mywifinet 2 3 5, etc...). They're all connected to the same thing but everytime it dies, the same setting will not reconnect and I have to register all over again. Registration is standard and set to remember and auto connect. This isn't my only problem with Vista but it is the most annoying. Why, why, why does Vista hate me?
i have this HP compaq presario CQ60 and any time i try to download anything over a few KB, the download fails. This happens during all updates, winupdates,antivirus updates, network file transfers ect.. Basically any downloads. I have no problem when using a LAN connection its only wifi when i have the problem. I have attemted forum searches on microsofts website to no avail , google, bing ect have nothing even close to the results im looking for, all my drivers are up to date.
Atheros 802.11b/g WLAN. Microprocessor2.10 GHz AMD Sempron SI-42 ProcessorMicroprocessor Cache512KB L2 CacheMemory3072MBMemory Max4096MBVideo GraphicsNVIDIA GeForce 8200MVideo MemoryUp to 1407MBHard Drive160GB (5400RPM)Multimedia DriveSuperMulti 8X DVD±R/RW with Double Layer SupportDisplay15.6" Diagonal High Definition HP BrightView Display (1366x768)Fax/ModemHigh speed 56k modemNetwork CardIntegrated 10/100 Ethernet LANWireless Connectivity802.11b/g WLAN
I have a Vista laptop which connects via wifi to my home network router and I can access all the PCs and Printers and internet no problem. I now have to do some work away from home and will purchase a USB Broadband modem which will give me mobile internet/email, but I will still want to move files and print when at home.
If I have my USB Modem and my Wifi enabled at the same time, can I access the Internet via the USB Modem, while accessing the PCs and Printers at home? How would my laptop know to access the Internet via the dongle modem and not through the router and modem on the home network?
I have two PCI wireless network cards from two different brands, Netgear WG311V2 and D-Link DWl-G520+. My Vista Ultimate 32-bit SP2 system has 4GB of RAM. Neither will detect wireless networks when the system RAM is greater than 2GB. If I pull out one 2GB stick, it works fine. Put it back in, failure to see networks. I tried the Netgear on a Windows 2003 Standard 32 bit SP2 with 4GB of RAM and it worked ok.
View 9 Replies View RelatedMy home is such that all my broadband to myPCs has to be wireless (the only place they could connect the cable was in an obscure, upstairs bedroom). In general this has worked just fine. I have 3 PCs currently connected to the network, One desktop and a laptop running XP and my new laptop running Vista (new is relative, I've been having this problem since January 2009 when I got the Vista laptop).
The two XP machines connect to the network just fine. Occasionally, when I work on the desktop, I'd see a notification icon that it has connected to the network, but in general I have no interruptions to my network connections. The Vista machine (Vista Ultimate, SP 2) is a nightmare. the WiFI connection keeps dropping. Additionally, often it would report that the network is connected, but in reality, nothing is reachable and I have to disconnect/connect to the network before any Internet site is reachable......
i run the internet through my wifi, the service is provided by the apartment complex to everyone. it is an incredibly strong signal for the whole building, and i am right beneath the source so i have always had just an amazing speed on my internet. the other day, while chatting on facebook of all places, something happened (what i do not know) and the firefox crashed. since that moment the internet has been chugging. and i mean chugging! it takes almost 2min just to load a page. (this is not consistent however some pages load faster) downloading speeds have all but stopped (i don't know how to check for just how fast they are going) i can't even load up Internet videos now its so slow.
i tried several fixes for the problem, but being a noob i think i screwed it up worse because its even slower than before. first i used uniblue registry cleaner and speed upper thing. they just screwed up my computer even worse and it was taking forever just to open a file folder let along load a webpage. i did a system restore to undue that damage. i tried resetting the autotuning. that did not work i even did an ipconfig/renew release thing. that almost did me in. i finally got the internet running again. still slow.