My basic setup is hanging off a Netgear DG834GT, which then connects to a Netgear FS608 (10/100 switch).
On this switch I have my old laptop running XP Media Centre, my spanking new desktop running Vista Ultimat x64 (fully SP1'd) and a Buffalo NAS DH500GL.
All sit within a foot or so of each other and connect via cat5e.
When writing to the NAS from XP, I'm getting write speeds of about 3.7Mb/s.
When writing to the NAS from Vista, I'm getting about 40kbs (yes, 'k' not 'M')
I get a similar 40kbs if writing from Vista to a shared doc area on the XP laptop.
Copying from the NAS to Vista (and XP) I get 3.7Mbs
Internet speed if similar on both for download (about 8Mbs) although I haven't tried upload speeds.
I've tried the auto-tune tweaks as suggested by Shane, and turned off DFS replication as suggested by DMEX.
Also tried plugging both the Vista box and the NAS into the DG834 incase the switch was causing the problem.
None of those helped
NAS firmware is fully up to date, as is Netgear DG834, and obviously the FS608 has no firmware to upgrade anyway.
At the moment I'm stuck with copying a file onto USB on the Vista box, plugging the USB into the laptop and uploading to the NAS from there - which reminds me too much of sneakernet technology .
this is my 3rd fresh clean install, using both vista x86 and x64, and all new hardware as well (new mobo, hd's, cpu, ram, etc):
symptom: after a day of two of creating a user account, the hd access starts to become excruciatingly slow, and gets slower with time. when you use explorer and want to access the hard drives, the system takes 3-7 seconds to open the folder. when browsing pictures, it takes 3-6 seconds to switch to the next, etc. creating a new user account solves the problem temporarily, until a day or two passes, and then the same thing starts to happen!
what i've tried so far: - disabled indexing (windows search service) - disabled hard drive indexing - tried booting up as ide, as well as ahci - created new install with raid0, and same issue.
system: * e8400 * asus p5q-e with latest bios * 2 x 320 wd 3200aaks sata drives, 1 x 250 wd 2500aaks sata drive * asus sata dvdrw drive * 4 gb crucial ballistix pc2-6400 (ddr2-800)
i've noticed this problem accelerates even more when using the "sleep" power mode. but even when disabling this, it still happens.
i've googled for over 2 weeks. i've done 3 fresh installs, i've replaced all the hw, and used 3 different copies of vista ultimate, with same results!
update: here is a video of the problem: Internet - windows vista hard drive performance issue
I am using pair of Intel E5410 quad core processor with chipset Intel 5400 with on board network card (Broadcom Net Xtreme 57 Gigabyte controller). OS Vista Ultimate on x64. While I access network it is very slow.
I'm running build 5384 on a Dell Precision 370 and a Precision 380. I've tried 64 and 32bit versions but I keep having the following problem: Basically I can access the internet but very, very slowly. Most pages just time out. The machines both have Broadcom NetXtreme 57xx Gigabit NIC's connected to Dell Powerconnect Gigabit switches. I've tried Manual IP config and DHCP but I can't get a reasonable speed through via ethernet! There's nothing wrong with the network, I've got hundreds of XP 32bit and x64 clients connected to the same network and they can all access the Internet fine. I can ping other clients on the netowork from the Vista machines and I get
Had an old PC running windows xp. Worked fine connected to my router using ethernet and powerline adaptors. Bought a PC from a mate running Vista Ultimate. Now I'm getting only about 5kb/s. Checked my router and reset it. OK. In fact, speed using wireless connection to router from another PC is absolutely fine so its not an internet/ISP problem. Checked my powerline adaptors and reset them. No difference. So, all I can think at the moment is:
1. Powerline adaptors have chosen this moment to play up. (although was working fine before).Getting hold of long CAT5 cable so I can plug directly into router to test this. 2. Ethernet interface on new PC is screwed. If so, I guess I can get hold of a PCI LAN card or something. 3. Somethings up with the Vista install. Maybe virus, malware etc. I did a malware sweep and it found some but no difference after cleaning this. Maybe I'll wipe it and install my old version of XP.
running Vista Ultimate 64bit. I created a junction point which mapped to my User folder on external hard drive. Then removed this junction point and pointed it back to the default C:Users... location but ever since the file system is terrible slow even on basic operations such as rename file. So it's NOT a slow copy/move file issue, just that all basic file functions are terrible slow. It doesn't matter if it's in my Users folder or elsewhere. As you can imagine this is making my Vista installation completely useless as software such as Visual Studio is hanging on basic operations. I've done everything I can think of - defragging, turning off Search/Indexing service... still the same
Dell Studio Laptop running Windows Vista Home Premium. Home wired & wireless network with Wireless N D-Link router, Netgear ReadyNAS duo wired to router, PS3 game console connected to router. I only use wireless from my laptop. When I try to move files around on the NAS using windows explorer, I can't seem to browse the NAS' content for more than a few minutes, then explorer locks up or enters a mode where it keeps refreshing the view of the network directory and doesn't allow basic file operations like right-clicking on a file to get its properties.
I can't get more than 1 Mbps of transfer speed with Robocopy out of the NAS. I have some video files on the NAS unit. Double clicking on any video to play it in Media Player is the worst thing to do - WMP doesn't manage to download enough data to buffer it and never allows to be shut down. I prevents Windows from shutting down cleanly. I made sure I had the latest drivers for the wireless adapter.
I have Vista Ultimate, my PC is a Dual Core Pentium Extreme 3.2 Gig with 4Gig RAM. I have two SATA Hard Drives, both Western Digital, my C: Drive is a 10,000RPM the second drive is 7,200RPM,both are about 40% full.When I run HD Tack I get much better performance from the 7,200 drive, about 75 Mb/s than from the 10,000 drive, 55Mb/s,I have run tests on the drives and both are testing as okay, no errors or issues.
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
I can't see my cd-drive in My Computer or device manager. I could reinstall windows, because quite new computer, but because I do not have cd-drive visible...
Ive been having some serious performance issues with hard drive xfer speed and performance, but I am not sure if I can narrow it down specifically to the HDD. The primary time where I get bad performance is when downloading files. It all started when I first installed vista and was downloading all of the updates and SP1. After a brutal night of waiting around for the files to download and install (I'm talking hours), performance did a huge jump, but was still sub par from before I reinstalled. Currently when downloading files from EA store, bittorrent, or any large file, say Vista SP1, my computer slows down to a halt. I defrag weekly, used an external defrag program for >64MB files. I used the tutorial to increase SATA drive performance, tried a few other tweaks on the tutorial forums, but nothing seems to work. It seems to be much worse when I try to unzip/unrar or otherwise process large amounts on my HDD. Ive done virus scans, spyware scans, used system optimizers, but I think im missing something.
i need an external hd to go with my hp pavillon core 2 duo. could you gime some info about size(gb) and label. i am experiencing a slow conection although using a broadband.
Yesterday evening i was working on my system and was changing the security setting of one of application, but after doing that.... I am not able to access my C: drive, my whole data is in C drive.
I have an A-Tec HD-227-U2 2.5in Hard Drive enclosure with a Fujitsu hard drive in it from a dead laptop. I want to recover files from the drive to my Vista PC. The device was recognised when I plugged the enclosure in (I am using both USB cables supplied with the enclosure, with no jumpers on the Hard Drive) and automatically installed the drivers. The device is shown in Device Manager as "Disk Drive" and the properties show it is working properly. The device is not shown in Disk management anywhere and is also missing from my computer. Any ideas why I can't access this drive???
I have a slave drive that was getting really filled (it was showing red). Now, it has disappeared from the "My Computer" section and I cannot find it. I don't know how to access it to take some things off. I have all of my photos and graphics on there and I'm scared of losing them.
I have a WD Elements Hard Drive, 160Gb, when I plug it into my computer, Vista business 32 bit, I cannot access the hard drive, it works on other computers and even when I plug it into my computer the blue light on the hard drive is on so I figured it must be my computer? but other hard drives work on my computer.
for having me everyone... My first question about Vista (many more to come I'm sure) is how come my access to the C: drive is denied? I get the following message when I attempt to create a new project in my audio program (Cubase LE): "C: is not accessible. Access is denied." Earlier today I was unable to unzip an installer I downloaded to the C: drive. How do I gain access to it?
I am trying to save some data from a friends laptop hard drive, i have plugged it in my usb device. It shows in xp's computer management as 'disk 1', but i cant see it in explorer. All context menu options are greyed out except 'delete partition'. It has Vista on, its not the jumper settings -
I have twp PC's a Vista Ultimate with two drives and XP Pro with two hard drives. I can access the files on the XP PC from the Vista PC, and I can access the files on the second drive (D: Drive) on the Vista PC from the XP{ PC. BUT I cannot access the files on the C: Drive of the Vista PC from the XP PC. When I look into the properties dialogue box for each drive on the Vista PC I see differences in the security options, where on the D: Drive I get "Everybody" as the Group/user name but for the C: Drive I get "Authenticated users".
When I run a program as an administrator or when windows needs my permission to run a program "User Access Control", it some times, actualy a lot of the time it takes a long time "up to 10 secondes" until it displays the UAC box,
I am using Robocopy to backup photos and music files to a local network connected 1TB Western Digital drive. The initial backup worked for both tasks. This is the command line in the .bat Robocopy C:UsersOwnerMusic ecordings \externaldrivepublicBackUp-Music ecordings /S /COPYT /MIR /Log:MusicBkupLog.txt Now, the subsequent backup for my music folders fails on a specific folder with error: ERROR 5 (0x00000005) Deleting Extra File \externaldrivepublicBackUp-Music ecordingsAmbroseNewA Fine Romance-Browne.mp3 Access is denied. The process stops there. Subsequent folders are not backed up. The ownership for that folder looks suspect: nobody (Unix User obody)
Other folders that work have owner as: administrator (EXTERNALDRIVEadmin) I can not change the offending folder's owner. I have tried the following as administrator: Properties > Security > Advanced > Owner > Edit > change owner to I get access denied. And with DOS from an administrator command prompt: takeown /f S:BackUp- MusicRecordingsAmbroseNew RMDIR /S S:BackUp-MusicRecordingsAmbroseNew I get access denied. I can access the directory so my path must be correct: dir S:BackUp-MusicRecordingsAmbroseNew How can I change ownership or delete the offending folder?
LAN network created by DSL-Router AVM FritzBox 7270. One LAN client - windows xp pro sp3 One WLAN client - vista business 32bits sp1. USB mass storage connected to router. Router shares the drive using samba server. Win xp has no problems while accessing this drive. Vista can access the drive only if it is not protected by password. What network setting is the vista pc missing ?
I'm using HDTune to benchmark my HD which is a Samsung T166 HD501LJ. The Access time used to be 15ms, but now its 16.5ms or so. I don't remember changing anything hard drive related. What could be the cause of this? Edit: Well the hard drive is filled up more now since I've ran the last test (15ms) but it has been defragged. Could this be it? Edit2: ok thats not it. I moved all files to a seperate physical drive and its still the same.
When I try to open some of my programs they won't open or run.A message box opens and says: "WINDOWS CANNOT ACCESS THE SPECIFIED DEVICE PATH OR FILE.YOU MAY NOT HAVE THE APPROPRIATE PERMISSIONS TO ACCESS THE ITEM."I get this too if I try a program from the toolbar,and sometimes when I open I.E.8 but it still opens.Vista x32. This box also appears when I download and prevents it from downloading.
A tiny bit of background story here. My sister is visiting and she has a habit of toying around with and messing my mothers laptop up. Now for what we thought we should do: We created my sister her own account, and I was under the impression that my mums login was an "Administrator". Now I made the mistake of deny access for "all users" to the C: thinking that her login would still have access. So now, I've tried booting in safe mode, opening the cmd prompt as the administrator, type net user administrator /active:yes. I logged in as the new Administrator login, but still cannot make any changes to the permissions on her C:. I can't change the owner either. I cannot create another user even. I'm lost and we can't even do a system restore. Getting which apparently has to do with permissions (gee, what a surprise).
Whenever I try to click on X: in My Computer I get the following: X: is not accessible. Access is denied. That's kinda funny given that earlier today, chkdsk /F was able to not only run on the drive but actually told me a few filenames (the records for those files had to be updated). I ran Ubuntu LiveCD and was able to access the drive just fine from that, as well. My question is... given all this, why am I unable to access the drive from Windows Vista? Sure, maybe the drive is going bad, but that doesn't explain why Ubuntu LiveCD and chkdsk /F can access it and Windows Vista cannot. So, short of just abandoning Window Vista all together in favor of Ubuntu, what can I do?
I tried to do some work with a usb drive that was on a XP Pro system. both system have the same user and password. This user is an administrator on both systems. When I try to remove a directory on the usb drive I get access denied. If i try to look at the level of security for this directory it say that I can't view the security. If I try to run the cmd as administrator and view the security it says access denied. How the heck are you supposed to correct this type of error. The book says to run cmd as administrator. But that does not seem to work. If I knew that XP PRO would work on this laptop I would remove Vista I've never had so much trouble with a new OS.
I am have 2 errors 1 is "Windows can't access the specified device, path, or file. You may not have the appropriate permissions to access the item." And the 2end error is "C: is not accessible Access is denied." I got both errors on my account that is a admin.
I have recently bought a new HP and wanted to get all the information transfered from my old hard drive to my new one. I cannot seem to do this tho because it will not give me the permissions to access the folders on the old hard drive. Is their a way I can access this information through an admin account? I have tried to dual boot but I cannot get into the old partition and it gives the blue screen of death on the old hard drive partition (running XP operating system).
