Very Slow Internet Access Via Ethernet Port
May 27, 2010
Had an old PC running windows xp. Worked fine connected to my router using ethernet and powerline adaptors. Bought a PC from a mate running Vista Ultimate. Now I'm getting only about 5kb/s. Checked my router and reset it. OK. In fact, speed using wireless connection to router from another PC is absolutely fine so its not an internet/ISP problem. Checked my powerline adaptors and reset them. No difference. So, all I can think at the moment is:
1. Powerline adaptors have chosen this moment to play up. (although was working fine before).Getting hold of long CAT5 cable so I can plug directly into router to test this.
2. Ethernet interface on new PC is screwed. If so, I guess I can get hold of a PCI LAN card or something.
3. Somethings up with the Vista install. Maybe virus, malware etc. I did a malware sweep and it found some but no difference after cleaning this. Maybe I'll wipe it and install my old version of XP.
View 4 Replies
ADVERTISEMENT
Jan 17, 2010
I've got a SAMSUNG notebook and my "Atheros AR5007EG Wireless Network Adapter" seems to be not working. I cannot see (let alone connect to) any wireless environment. I have to access the internet via ethernet cable, which is really annoying. I've done the following so far: The device manager says the adapter is working properly. I've updated to the latest driver The adapter is also turned on. I don't know what else I should do.
View 9 Replies
View Related
Jan 18, 2010
We were so very very happy and pleased that Malwarebytes free version helped clean out the InternetSecurity2010 virus/trojan infection, thereby resurrecting this Toshiba Satellite (WinXPMediaEdition2002,Sp3).
That.... we purchased a key code enabling Malwarebytes to run all the time
We did this despite some warnings by one or two posters on this site... '
well,
we have found out that Malwarebytes ... first...blocked access to one of our email IP host sites. After over an hour of searching, we found out how to add that site to the program's "ignore list' so that it stopped blocking that access.
Now we have discovered that Malwarebytes has disabled com port 3, which our internal modem was using to reach the internet.
SO, we have disabled Malwarebytes. We still appreciate the fine programmers at that company ... but the keycode fee to enable realtime operation of their program is, we regret to say, best donated to St. Vincent de Paul (or Goodwill or Starvation Army) instead.
Does anyone just happen to know how to fix this easily in Malwarebytes, (the Device manager is no help) or else we will defer buying all the additional licenses were were planning for our other computers....
View 4 Replies
View Related
Aug 9, 2006
I'm running build 5384 on a Dell Precision 370 and a Precision 380. I've tried 64 and 32bit versions but I keep having the following problem: Basically I can access the internet but very, very slowly. Most pages just time out. The machines both have Broadcom NetXtreme 57xx Gigabit NIC's connected to Dell Powerconnect Gigabit switches. I've tried Manual IP config and DHCP but I can't get a reasonable speed through via ethernet! There's nothing wrong with the network, I've got hundreds of XP 32bit and x64 clients connected to the same network and they can all access the Internet fine. I can ping other clients on the netowork from the Vista machines and I get
View 9 Replies
View Related
Dec 16, 2008
I've got a Linksys router, it's a BEFSR41 v2 Etherfast 4-port cable/DSL router with 4-port switch. It's on the computer downstairs. This computer runs Windows XP. My brothers' upstairs is connected and working. It runs Windows 2000. Mine... I just had to replace. I went to Windows Vista Basic instead of XP. Now, I don't have an ethernet card, but is there any way I can get online with this computer anyway?
A long time ago, I went to a LAN party and my friend's freind downloaded some kind of driver to allow my computer to connect to the internet without needing an ethernet card. Damned if I remember the motherboard, this was four years ago. I just purchased an Intel Dual Core e5200 2.5 GHz. The motherboard is an MSI P6NGM LGA775 mainboard. It says it is NVIDIA MCP73 chipset based. Is there any kind of driver I can install for Windows Vista that bypasses the need for an ethernet card?
View 9 Replies
View Related
Apr 25, 2010
I am really not very good with hardware, but I want to install some new USB 3.0 ports. I have selected a card, ASUS U2S6 USB3.0/Sata3 6Gbps PCIE Card and I want to install it. I have checked my computer and I do have the required PCI-E port. That is not the problem. Just two questions:
1) This website seems to suggest that it will only work on some very selected motherboards. Asus U3S6 USB3.0 & SATA 6Gbps PCI-Express Controller Card [U3S6] Controller Cards SATA III 6Gbps
Compatible motherboards: P7P55D Deluxe, P7P55D EVO, P7P55D PRO, P7P55D, P7P55D LE, P7P55 LX However, my motherboard is not listed. I thought that PCI-E cards were just meant to be insert and install drivers. Is this not the case?
2) Also, I have noticed that this card does not require additional power. Does this mean that it might not be able to power some of the more power consuming USB gadgets that I might buy? Therefore, would this be a better choice: UNITEK 2 Port USB 3.0 PCI Express Card Reviewed.
I do have a spare Molex power cable, so that would not be a problem, though an extension would be required (again not a problem) I do like the idea of having the extra SATA3 connections (and I know that using them may slow things down) but primarily this is for my USBs, so I want proper functionality.
View 5 Replies
View Related
Oct 8, 2009
Here are some necessary specifications:
Cable Modem: Arris CM450
Router: Linksys Wireless-G Router WRT54GL (DD-WRT software)
Firmware: DD-WRT v24-sp2 (07/22/09) std - build 12548M NEWD Eko
1TB Lacie NetworkSpace Ethernet drive
Laptop: Acer Aspire 5633WLMi
Windows Vista Home Premium 32-bit + Service Pack 2
802.11 a/b/g Wireless LAN: Intel RPO/Wireless 3945 ABG
The issue:
My 1TB LaCie NetworkSpace is attached to my Linksys WRT54GL router via Ethernet cable.
Whenever I try to copy files from my NetworkSpace over onto my laptop(wirelessy), my cable modem disconnects from the internet and 3 green LEDs start to blink (Power, Online and Cable).
I am left with no internet access.
However, as soon as the file has finished copying my modem reconnects to the internet again. All LEDs go back to their normal state again and I regain access to the internet..........
View 9 Replies
View Related
Mar 23, 2010
I just moved into a new apartment where there is already wireless internet set up in my office. I don't actually want/need wireless so I'm trying to connect to the wireless router (Linksys WRT110) via ethernet cable, but am getting "local access only". The other two computers that are connected to this router are connected to the internet and thus are NOT having this problem.
-I can not connect directly to the modem because then everyone else loses their internet access.
-firewall is off.
-ping test doesn't work, I can't ping anything since I can't get online AT ALL.
-I know my cable works; if I connect it to the modem, I can get online.
-I know the router works, because everyone else can get online. I tried to get help from Linksys, but they want $30 for one-time help, which, IMO, is BS.
View 9 Replies
View Related
Apr 25, 2008
I have evga motherboard with built in Realtek HD audio (ALC883). Board features 2 ports for digital audio (optical and coaxial). and according to manual both are output. However when installed vista drivers one of the ports has been chosen as digital output (optical) and another as digital input (coax) (i can see that when i hover the mouse over the jacks in "Realtek HD audio manager") Is there any way to make the coaxial port as an output port instead of optical? My my HT reciver has no free optical ports so i have to use coax to get some sound from the computer.
View 9 Replies
View Related
Apr 25, 2008
I use a AT&T exspress aircard and can't send mail out through windows mail on Vista. Do I need to change my outgoing mail port from 25 to another port number? If so what port or how do I obtain that info?
View 9 Replies
View Related
Feb 27, 2010
Our Vista laptops (& my Xbox) access our basic Windows Home Server system through a Netgear router. It's all fine, but I want to (easily & quickly!) restrict & control when some laptops can access the internet while allowing free access to the server. (For instance, so children's internet access can be monitored but they can always get to photos & backups, etc. on the server.)
View 5 Replies
View Related
May 3, 2009
My basic setup is hanging off a Netgear DG834GT, which then connects to a Netgear FS608 (10/100 switch).
On this switch I have my old laptop running XP Media Centre, my spanking new desktop running Vista Ultimat x64 (fully SP1'd) and a Buffalo NAS DH500GL.
All sit within a foot or so of each other and connect via cat5e.
When writing to the NAS from XP, I'm getting write speeds of about 3.7Mb/s.
When writing to the NAS from Vista, I'm getting about 40kbs (yes, 'k' not 'M')
I get a similar 40kbs if writing from Vista to a shared doc area on the XP laptop.
Copying from the NAS to Vista (and XP) I get 3.7Mbs
Internet speed if similar on both for download (about 8Mbs) although I haven't tried upload speeds.
I've tried the auto-tune tweaks as suggested by Shane, and turned off DFS replication as suggested by DMEX.
Also tried plugging both the Vista box and the NAS into the DG834 incase the switch was causing the problem.
None of those helped
NAS firmware is fully up to date, as is Netgear DG834, and obviously the FS608 has no firmware to upgrade anyway.
At the moment I'm stuck with copying a file onto USB on the Vista box, plugging the USB into the laptop and uploading to the NAS from there - which reminds me too much of sneakernet technology .
View 9 Replies
View Related
Jul 9, 2008
I am using pair of Intel E5410 quad core processor with chipset Intel 5400 with on board network card (Broadcom Net Xtreme 57 Gigabyte controller). OS Vista Ultimate on x64. While I access network it is very slow.
View 7 Replies
View Related
Jul 29, 2009
Up until this week my PO3 access on one of my WM accounts has been perfect, but now message download has slowed to less than a crawl. Current config:
TCP Global Parameters
----------------------------------------------
Receive-Side Scaling State : enabled
Chimney Offload State : enabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : ctcp
ECN Capability : disabled
RFC 1323 Timestamps : disabled
I have tried disabling auto-tuning and have also used 'highlyrestricted' but this seems to make no difference. Net access for everything else is fine.
View 7 Replies
View Related
Jan 28, 2009
my internet speed i have with virgin is supposed to be 20mb but still i am getting very slow connection any ideas??? im using windows vista home premium 32x im using a netgear usb adapter but my room is next door to my linksys wifi connection i get 100%
View 7 Replies
View Related
Jun 19, 2008
my internet is really slow, downloading at 15 KB/s instead of 150 KB/s. My housemate uses the same wireless router and his connection is fine. I initially thought it was due to 1 of the 8 vista updates that auto-installed when i first rebooted, but after uninstalling them, and also trying a system restore, internet was still slow.
View 4 Replies
View Related
Sep 18, 2009
Last Thursday my pc downloaded and installed the latest set of updates and since then the Internet speed has been sluggish at best and non-existant at worst.
I contacted my ISP and they did all their tests and announced that the signal was good and I might have a virus, so I got a bit paranoid and ran scan after scan (after the nightmare of trying to get the latest updates). I ran these with Zone Alarm Extreme and Spyware Doctor (but not together) and all the results were clean.
So I'm wondering if the latest Updates are to blame; one of the kids' laptops has exactly the same problem (he uses a router while I use a cable) and he downloaded the updates at the same time.
Interestingly the other kid's laptop seems to be untouched, but he has 32 bit Vista as opposed to our 64 bit, and it appears that we're all using different browsers (IE8, Mozilla and Chrome)
View 9 Replies
View Related
Dec 7, 2008
I got my internet speed slower and limited! I dunno how, but it just change very drastically. Why i just know that is that my roomate, use his own laptop but he has an internet speed 8 times faster!! He use Win XP on his laptop. It happen when i installed a McAfee Enterprise 8.7i in my laptop. Before the installation progress, my Internet speed is as fast as my roomate does. But it suddenly happen like that and i got system restore but it useless. So, my question is, how can i got my internet speed to normal.
View 6 Replies
View Related
Mar 23, 2008
I have a fairly typical home wireless network. My main desktop on IP 192.168.1.2 is connected by ethernet to my router. My laptop is wirelessly connected and has IP 192.168.1.3. My desktop is running Apache/MySql with a local web in htdocs/myweb. If I access the local web from my laptop using the IP address as it's very fast, but if I access using the computer name it is unbearably slow - every page load takes forever. What's the explanation for this, and can it be fixed? I am going to be installing this system for a local charity and they won't want to (shouldn't need to) be typing IP addresses.
View 5 Replies
View Related
Feb 20, 2009
Been running Vista x64 for a while with no problems at all ( yes...honestly!!! ) with a Quad Core and 4Gb ram and an internet connection that was as good as I was expecting. A few months back, though, things went downhill very suddenly! Now, it takes 20 minutes plus just to open some websites, and download speeds have dropped to virtually nothing. I am talking dialup speeds on a 2Mb line. Model is a Belkin wireless router, but I am connected to it by cable since the PC is right by the phone line. I have 2 other PC's in the house ( both running XP wirelessly ) One is temporarily offline due to other issues... but the other is connecting normally with no speed problems. I have done the 'google' thing, and disabled the auto-tuning facility, with no noticable improvements............................
View 6 Replies
View Related
Aug 6, 2009
I am having an issue I recently upgraded my 32 bit vista home basic to 64 bit Vista home premium I am having internet issues. My internet is very slow and I cant browse certain sites for example aol.com or aim.com. I have tried many different things browsing other forums, nothing has worked. I have tried going into my network card advanced config settings, I have tried downloaded 64 bit Vista firefox browser I have re booted my modem and my router. I never had this problem with windows vista 32 bit home basic, it has only started happening now that i have re formatted.
View 6 Replies
View Related
Aug 12, 2008
I've had vista for around 10 months and never really had a problem with the internet but in the last week I've noticed it is running really slowly. No explaination it just runs slow, really slow. I have AVG, stopped running that, I've rolled back recent windows updates, I've done a system restore to last week. My network card has a greyed out rollback button so can't do that.
Also I've ran some speed tests and I get around 250k download and a 690k upload which again is strange, but I've ran the same test on a eeePC running linux and a laptop running XP and get 1mb download with a 690k upload.
View 5 Replies
View Related
Feb 14, 2010
I have switched from a Sony Vaio FE41S (2GB/667MHz - Windows XP) to a Dell Inspiron 1545 (3GB - Windows Vista Basic). On my Vaio, I can watch things online such as Sky Player online and TVCatchup, however, on my brand new Dell, the pictures on these websites moves horrifically slow, maybe 1 frame every 10 or 20 seconds, and slows down my entire computer. As soon as I close these things, my computer runs completely fine again. Also, my downloads go between 100-200kb, whereas on my Vaio, they go between 700 and 1,100kbps
I located a few of these problems - McAfee, which I deleted, and this helped to speed up my computer in general, however, I still have not been able to use such websites. I have tried many of the fixes suggested online, such as the various netsh things and getting rid of phishing on IE. I don't have any antivirus anymore and I've checked for things such as viruses and malware.
View 5 Replies
View Related
May 10, 2008
is it plausible to see a list with all applications that use the network/internet? this because my pc is very quick when the internet is off, but when I start my pc and the internet is on, than it is very slow (for example: I had to wait 30 minutes before I could log in on this site!!!). it's not because of any firewall/antivirus/antispam/antispyware program, because I turned them off.
(it started on the 7th this month, when I found out there were some updates from vista. I even couldn't download them, because everything crashed: desktop, windows update, taskbar, microsoft word, MSN. Since than it happens all the time there is an internetconnection)
View 6 Replies
View Related
Apr 21, 2008
I somehow fixed my problem before, but then I reformatted my laptop which I regret now. I've downloaded all the vista upgrades and even tried turning off my firewall. But no matter if I'm using Firefox or IE7 it takes waay too long to load a page. I googled this and I've tried doing the "netsh interface disable" command but that doesn't really work either.
View 4 Replies
View Related
Jan 18, 2009
I'm rather experienced with computers and know its nothing of the obvious. I recently built a new rig, my motherboard is the asus striker II extreme which has dual gigabit lan and the ai teaming technology. I did a fresh install of vista ultimate x86 on the new hard drive, everything running fine and i was achieving maximum internet speed. However after running windows update i noticed the download speed is terrible, approximately 25kb/s on average and i am capable of speeds of up to 650kb/s. After updating all my drivers, running the computer in safe mode, turning off all security and eventually resorting to using a download accelerator my problem persisted. So i thought it must be the update, i wiped the hard drive clean and did a fresh install of vista again, however, before running windows update my speed had actually worsened to around 6kb/s and around 50 or so using a download accelerator.
I had the same OS on my previous setup, same router too, and it worked just fine. I have tried a connection using the wireless pci-e card i had on my previous setup and the dual rj45 cable to my router and even tried it using just one cable. I really can't get my head around whats going on. If anyone has any ideas or experience with this problem, Problem solved! Intels annoying pushpin engineering once again has proven itself to be a ridiculous method of installation. Reapplied some arctic silver 5 and remounted the pins after much effort bending pins into place. Internet speeds are once again optimal!
View 4 Replies
View Related
Mar 16, 2008
ever since I started using Windows Vista I've had a low internet download speed (not the amount that I'm paying for). I know this isn't a problem with my ISP because on my other computer that has Windows XP, the internet connection is just fine.
I've tried the following tutorials:
Auto Tuning - TCP/IP receive level
QoS Bandwidth Reserve Limit
Neither of them have resolved my problem. My download speed is the only problem, the upload speed is "normal". I'm paying for 8Mbps but I get 0.5-2Mbps on my Vista system. I have my modem directly connected to my computer, through one of the two Ethernet ports on my computer.
View 4 Replies
View Related
Mar 25, 2008
running Vista Ultimate 64bit. I created a junction point which mapped to my User folder on external hard drive. Then removed this junction point and pointed it back to the default C:Users... location but ever since the file system is terrible slow even on basic operations such as rename file. So it's NOT a slow copy/move file issue, just that all basic file functions are terrible slow. It doesn't matter if it's in my Users folder or elsewhere. As you can imagine this is making my Vista installation completely useless as software such as Visual Studio is hanging on basic operations. I've done everything I can think of - defragging, turning off Search/Indexing service... still the same
View 8 Replies
View Related
May 15, 2009
Dell Studio Laptop running Windows Vista Home Premium. Home wired & wireless network with Wireless N D-Link router, Netgear ReadyNAS duo wired to router, PS3 game console connected to router. I only use wireless from my laptop. When I try to move files around on the NAS using windows explorer, I can't seem to browse the NAS' content for more than a few minutes, then explorer locks up or enters a mode where it keeps refreshing the view of the network directory and doesn't allow basic file operations like right-clicking on a file to get its properties.
I can't get more than 1 Mbps of transfer speed with Robocopy out of the NAS. I have some video files on the NAS unit. Double clicking on any video to play it in Media Player is the worst thing to do - WMP doesn't manage to download enough data to buffer it and never allows to be shut down. I prevents Windows from shutting down cleanly. I made sure I had the latest drivers for the wireless adapter.
View 4 Replies
View Related
May 7, 2007
my router is zyxel 660 connected through etherrnet on netgear adapter (i also have a realtek onboard one)
im having really slow down and up speed and i dont know y
the problem remains in both cards (netgear have some beta drivers that didnt hel,realtek has no available ones ,only the microsoft's ones)
my other pc on xp with the same router has no problems
View 6 Replies
View Related
Mar 8, 2009
I down loaded the Internet Explorer 8, is it normal to take 13 seconds to open?
I did not time the I.E. 7, but it was a lot faster to open. Furthermore, I did not notice any improvements.
View 9 Replies
View Related
