The hard drive was of SATA type. I attempted to use VHD file to migrate the system from the old hdd to the new hdd but failed. The following was the steps taken:
1. Created a VHD file on the laptop machine and stored it on an USB interfaced external hdd.
2. Temporarily installed the new SATA hdd on a desktop machine and created partitions including data partitions.
3. Moved the VHD file to one of the data partitions on the new hdd.
4. Replaced the old hdd on the laptop machine with the new hdd.
5. On the laptop machine, the first primary partition of the new hdd was set active since the Vista system was installed on the first partition of the old hdd.
6. Started the laptop machine, let the system boot from the installer DVD and selected "Repair".
7. "PC Complete Restore" was selected. The installer located the VHD file and the restore process began.
Then the following message was displayed:
The Windows Complete PC Restore operation failed.
Error details: The parameter is incorrect.(0x80070057)
I try to do a backup and after selecting the drive I want it backed up to and it starts, almost immediately I get the following: The backup failed. Failure in a Volume Shadow Copy Service operation. (0x807800A1). Additional Information: The writer experienced a non-transient error. If the backup process is retried, the error is likely to reoccur. (0x800423F4). I'm running Vista Ultimate 64 and the drive I'm trying to back up to is just a secondary SATA drive.
I went to see when the last time my complete PC image was made, on boot up I entered F8 and went to repair PC and went to complete PC backup. There was none made. So I rebooted and went to backup and restore center to make one. There is no backup button. Is this because I have home Premium? It's not offered on Home Premium. Is there a Freeware program that I could use to make it appear on the System repair menu?
I want to build a PC. I've browsed around the 'net looking for information on Complete PC Backup. The only thing that I've found on the 'net explains how to do a backup & restore. I've browsed around the Microsoft Vista discussion groups & found out that it is possible to do incremental (I wish that it would do differential instead of incremental backups.) as well as full backups.
Can I give the backup files names or does Windows? For example, before I install certain software can I give the backup a file name such as "before installijng XYZ software"? The way I understand it with incremental backups, the full backup has to be restored first & then the incremental backups are restored next starting with the oldest & proceeding to the latest. Since the Complete PC Backup does incremental backups, does the Restore wizard restore the incremental backups in order?
The backup is not failing, it says it's complete, but the file that it creates is less than 70GB, and my drive is 225GB full out of 279GB. The machine is running Vista Ultimate and running Vista Media Center. 157GB of the files are recorded shows, my music and pictures. I'm expecting a file closer to 225GB, especially since media files don't compress well (if this program compresses).
I find it awfully coincidental that 225 - 157 = 68, which is about the size of my backup file. The bigger problem is that I can't use the backup it creates. When I go to the restore operation, it finds the backup, I hit start and get back Restore Failed, element not found 0x80070490, which leads me to believe the backup is incomplete.
I suffered a hardware failure on the system (C:) volume yesterday, which is in a RAID 0+1 configuration (of four Western Digital Raptor 74GB drives). I managed to keep the system up long enough in degraded mode to perform a full (and successful) Complete PC Backup onto an external USB hard drive. This was done just in time, as at the next reboot, the RAID array failed completely and caused data loss (amongst others, my user profile files and the boot manager system file). When I booted up with my original Ultimate DVD and chose to completely restore the PC, it cannot find any images despite the USB drive being connected to the PC. I have verified in the BIOS that the USB drive was recognised. Upon further research, the original (pre-SP1) Vista RE does not support the loading of USB drivers at the Complete PC recovery stage - these drivers have to be loaded in manually via drvload.exe in X:windowssystem32.
I tried to load in drivers in C:windowssystem32 (surprisingly still accessible), but failed to do so. Has anyone done this before? Where do I find the correct INF to load into Vista RE in order to access my Complete PC Backup image? Do I need other INF files in addition to USB.INF to get this working? I presume it may be necessary to get the USB drivers onto a CD-R and loading them in that way, although I'm hoping the solution will be more self-contained on the PC's system drive.
upgrade HD from 60G to 250G without having to reinstall all files and programs. Windows Complete PC Restore cannot see DVD with backup image file
1. Backed up C: using Windows Complete PC Backup. (6 DVDs no errors.) 2. Removed old HD and inserted new. 3. Booted Windows Vista install DVD. (I proceeded to partition HD but did not complete the install.) 4. From Windows Recovery Environment, I chose Windows Complete PC Restore. 5. Inserted Backup image DVD disc1. 6. When it looked for the location of the image it couldn't find it so it fails.
My system restore fails every time I attempt it. This has happened the last 3 times I had a need to attempt restore. (Three attempts separated by months in time, about different issues.) This time, I am thinking something may be wrong with my system restore function. In this case, it is simply a matter of trying to roll back a browser update. I saw a whole list of available restore points, and I went to the second one back - from only a few days ago. The restore failed. I am using Windows Vista Home Premium, OEM from Gateway Laptop about 1.5 yrs old. I allow most updates.
Can anyone get the restore feature working, 95% of the time on trying it out, it fails to restore, and it only seems to keep a few days chekpoint, why doesn;t it work like XP or am I missing soemthing?
When I try to undo a restore point, a get an error message that the operation has failed because of an unknown error. Then none of my other restore points will work, either.
Noticed that this happened after a failed System Restore. I remember System Restore saying something about the HDD not being restored because it was not plugged in. I continued with the restore but it failed. I tried 3 times and the restore failed every time. Finally a restore in Safe Mode Worked. Now, when I plug in My Book Western Digital 500GB External HDD, Vista says that a driver could not be found. Even manually pointing to the System32 folder didn't work. I went to the WD website and no driver...just diagnostics and a control GUI or something. Since Vista can 'SEE' the HDD but can't 'OPEN THE DOOR', is there an alternate solution? I even ReInstalled the OS thinking that would somehow fix the problem. (I also had SP1). I need to be able to access this drive to recover Picture of my New Born baby Girl.
My laptop (Advent 8117 running Vista if that helps) has been working fine, then this morning things went pear-shaped. To begin with things worked as usual - Everything seemed to load up as normal, I left the room for maybe 5-10 minutes and when I returned there was a black screen. I waited a while and nothing happened so I restarted. It comes up with 'Windows failed to start. A recent hardware or software change might be the cause.' From there I can either start normally or run a repair. It doesn't seem to matter what I click here because I get a 'Techguys' support thing come up either way but now nothing on it works. To begin with I ran the Repair Environment, but it couldn't fix it. I also got to try a System Restore but I seem to have no points to restore to. Now I can't get the Techguys page to do anything. So I tried running in Safe Mode but once again I'm faced with the unmoving Techguys page, and the same goes for when I try and load from the Last Know Good Configuration. I desperatly don't want to have to lose everything.
I'm new to the forum and not very technical. OS: Vista Home Premium 32 Background: In the last few days, my Vista went horribly wrong - it crashed and I dont know why. I havent added anything new apart from software - BBC iPlayer. Plsu, a lexmark printer driver for an X1100 has never worked - it is not vista approved but the printer has worked. I tried restoring to an older version using my original install CD but it fails. Observation: The PC does startup now but when I click on my account login - I get a blank screen and explorer doesnt display - there is no desktop. If I press Ctrl-Alt-Del - I can see the usual choices...
I'm in the process of rebuilding my wife's Sony Viao after Sony reimaged the HD (Vista Home Premium) and got to the point where I wanted to create a restore point. This attempt failed, I went into SAFE mode and tried again and I get a message "The Volume Shadow Copy service used by System Restore is not working. For more information view the event log. (0x81000202). I go to the Event Viewer and it fails "Event Log service is unavailable. Verify that the service is running." When I go to the "Services" I don't see any entry for the "Event Log" - what should I be looking for? How do I get the system restore working?
I have my laptop(Vista Home premium 32 bit) fine and running from past 1 and half year. Suddenly from 5 days I am facing 'Display driver nvlddmkm failed and restore successfully'. Don't know when and why this happens.So I thought of restoring my system to 5 days back.I selected System restore back up point to 23rd of September,09.During this process something got messed up and when restarted it is showing 'blue screen' . Nothing else is visible.I'm able to login through safe mode.but don't know what to do with this. I also tried to do system repair. But no use.Ended up with same. Tried to do system restore again. Even if I want to reinstall Vista, manufacturer has not provided any backup cd with my laptop.
Why can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
I have installed Microsoft Office 2007 SP2 from windows update...but i have a question....How can i delete this ''failed message'..not updates..only 'fail message'' from update history..look at this
I am running Vista on a Dell XPS 420. I came home to find both drives failed in a RAID 1 mirror. Dell gave me no help recovering data, but did send two new drives. I have installed Vista on one of the new drives without RAID. I wanted to see if I could recover any files from the failed drives, but I can't seem to get Vista to recognize either of the old drives that were in the failed RAID array. The failed drive does appear during boot up and still shows as part of a failed array. How can I get Vista to recognize the failed drive so that I can then attempt to run file recovery software on it?
After installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
I have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
I went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
I am running a hp pavilion dv9730 with vista home prem. 32. I need to restore my system but the restore program quits do to a virus in the restore files. As it is restoring Norton sees the virus and removes it from my system but Norton can not see the virus inside the restore files. Right now my system is fine (virus wise) but I need to restore from an earlier restore point because I deleted some files and now my cd/dvd drive is not recognized. But like I said, I can not restore do to the fact that I have a virus buried inside my restore files. I could care less about the virus in the restore files, my main goal is to get my cd/dvd drive working again so I can install my business software.
I have been trying to copy some folders from external HDD and whenever I do it, I receive the message. I noticed that if the folder is not big, the copy is completed, but if it is a little big, I receive the message. I also have tried to use drag-and-drog, but it is the same thing.
Open it by ultraISO then extract it in a new folder in your desktop n then run the setup.exe wait until they do there job hahaaa... its working for me after the installation complete. 100% u can see 3.5gb change to 4gb
I performed the complete PC backup but I don't know if it worked and if it did, what discs are valid. It was a confusing process. I have 36 GB to backup and it said it should take 3-5 DVD discs. When I inserted the first disc it said to label it, including the date and time of the backup followed by "1". It did the same thing four times, and each time the progress bar started from the beginning. After the fourth disk, it finally went through verifying the disc and the progress bar went further. It told me to label backup was complete. The last two discs are readable but the other three are not. Did the system back up all 36 GB on two DVDs? If there were errors writing to some discs then it should tell me that the discs are not part of the backup set.
I downloaded en_windows_vista_enterprise_with_service_pack_1_x64_dvd_x14-55934.iso and burned it to a DVD. Then I ran SETUP.EXE on a 64-bit Vista system. The installation ran as an UPGRADE for hours. Literally hours. When I awakened in the morning, the computer was stalled in the cleanup phase of installation. I power cycled the computer. Vista decided the Upgrade was a failure and reverted to the state before the Upgrade started. I see no reason for this behavior.
I have windows vista home premium 32 bit, with nvidia geforce 7100 GS. I have tried loading myst uru complete chronicles, and nothing happens. I don't know that much about computers, what can i do to load this game, as i have completed all the other myst games apart from the path of the shell. I'm that obessed with the myst games, if all ele's fails i will just have to buy another computer that runs on windows xp.
I have an issue with Vista SP1 installing (No seriously! Nobody else having the issue, right??). It gets through 100% of stage 3 of 3, then after a minute or two says the "Setup did not complete. Reverting changes." message. Before the Microsoft super wizard got on the phone with me, I had already done a memory scan, chkdisk, scannow, file cleanup, defrag, nothing helped (I have Home Premium, and I do have the two required updates installed as well). When he connected to my computer, he tried to install right off the bat (a stupid thing to do, considering I wouldn't be calling if I didn't have the issue) and it of course failed. Then after checking to make sure no antivirus etc was active (which I uninstalled the day before) he disabled all non-Microsoft services from startup and disabled my TV card, sound card and graphics card, then tried again. Still didn't install. Lastly he installed some kind of tool from Microsoft's update site and tried to install SP1 again, this time from the standalone 500+mb version. No luck.
He scheduled a call today between 3 and 5pm from one of their research and developement team members to get deeper into the problem, but do any of you have any ideas what's going on?
Today, I was forced to use my Vista Ultimate installation disc to reinstall Vista - since yesterday morning, my computer was not able to get out of a loop (first going to Windows Error Recovery and then, when selecting any of the options, going to the green loading bar, where it the green bar stopped moving about 2/3 of the way, and going back to Windows Error Recovery).
The installation went smoothly enough, but I am absolutely clueless how to get my computer to roughly the same conditions it was before this fiasco. Fortunately, it would appear that all of my files and folders from before this re-installation have been saved in the folder Windows.old. However, I am at a complete loss as to how to reconfigure my Internet connection, how to restore my previous screen resolution (there are now only three options for resolution under Display Settings), and essentially getting the basics back in order.
