Starting Over After A Complete Reinstallation
Feb 2, 2010
Today, I was forced to use my Vista Ultimate installation disc to reinstall Vista - since yesterday morning, my computer was not able to get out of a loop (first going to Windows Error Recovery and then, when selecting any of the options, going to the green loading bar, where it the green bar stopped moving about 2/3 of the way, and going back to Windows Error Recovery).
The installation went smoothly enough, but I am absolutely clueless how to get my computer to roughly the same conditions it was before this fiasco. Fortunately, it would appear that all of my files and folders from before this re-installation have been saved in the folder Windows.old. However, I am at a complete loss as to how to reconfigure my Internet connection, how to restore my previous screen resolution (there are now only three options for resolution under Display Settings), and essentially getting the basics back in order.
View 9 Replies
ADVERTISEMENT
May 2, 2010
how do i do a clean install of windows without the cd. system manufacturer:Hewlett Packard model:compaq SR5129UK System Type 32 bit
Windows edition Windows Vista Home Premium Service Pack 2
View 9 Replies
View Related
May 11, 2009
I bought HP Laptop 9 months back, which came with vista home premium with it. now it is running very slowly. So i want to format and reinstall the vista home premium. My Question is do I need to get the activation key for the reinstall also(i have product key of the previous installation)? is it legal to reinstall home premium with the product key that i have?
View 5 Replies
View Related
Sep 17, 2008
I am wanting to do a clean install of Vista Ultimate soon, I was wondering if there is anyway I can save all the settings for my Services (services.msc). I have Vista services tweaked the way I like them and having the settings saved would make reinstallation a lot quicker and easier. I know they can be exported as a TXT document but I was wondering if I can save the Registry entries and if so, where are they stored?
View 4 Replies
View Related
Apr 30, 2009
I had a catastrophic crash and was forced to reinstall Vista Home Premium 32bit on my Gateway desktop. The installation created a windows.old directory. I am unable to delete
this. I have tried the Disk Cleanup tool and a "delete file on reboot" utility. Neither work.
View 4 Replies
View Related
Apr 22, 2010
I'm currently experiencing an issue with a Visa Business laptop where it had suddenly been taking approximately 20 minutes to boot, after running various virus scans and checking through the boot logs I was unable to find a solution and as such decided to reinstall Windows to resolve my problem. However, I have found that even after completely reformatting the drive and reinstalling Windows Visa I am still experiencing this extremely long boot time. I have observed that the long boot time does not occur if I select to boot in to safe mode, and for a large majority of the time when the computer is booting the hard disk activity light isn't even flashing with Windows freezing on some attempts while booting.
To attempt to see if this was a hardware issue I downloaded a copy of Linux Mint onto a DVD and booted from it, as expected it booted extremely fast (for a disk) compared to Windows. Being unable to fix the problem myself I have decided to finally request help from people whom would be more knowledgable in this area than me :P To assist in finding the resolution of my problem I have included a copy of the bootlog (I have disabled the drivers that do not load and have noticed no difference in the overall boot time).
View 9 Replies
View Related
Nov 4, 2009
I am relatively new at Visual Studios, and I am trying to get it to work on my vista. My command prompt displays the message "'C:Windowssystem32command.bat' is not recognized as an internal or external command, operable program or batch file." I checked to see if the application and target were still there, but I am just not sure why it would do this whenever I would run it. Is there any way I can reinstall command prompt without messing up the rest of my computer?
View 5 Replies
View Related
Dec 27, 2008
im new here so dont be harsh but last night i decided to format my pc, so i formated it and tried to reinstall vista, the reinstallation worked fine but then it said i had to have a old version of windows for me to activate, because its an upgrade version. i then formated AGAIN and tried to clean-install XP so i could then upgrade to my vista but during my reinstallation of xp it stopped working. this is where it may get confusing haha, after the first part of the xp install it restarts (the first part meaning where it formats and copys all the files to memory) but just after it restarts it comes up with the screen "press any key to boot to CD........" i let it go because ur not ment to boot to cd after that, but on that same screen it comes up with a few different coloured boxes on the screen and it just hangs and thats where im absulutly stumped
View 4 Replies
View Related
Dec 9, 2008
I have a friend with Windows Vista Home Basic on his HP laptop, he has a valid key in the back of it on a sticker, it worked before, but after a reformat and reinstallation of Windows, it keeps bugging him that it's not genuine. We tried various command prompts found online to reset validation keys or stuff like that, we passed the phone activation successfully, but still there's no change.
View 6 Replies
View Related
Mar 26, 2008
i recently had to reinstall my Windows Vista Home Premium. I am not the best with computers, so I am very stuck on this issue. I have a NVIDIA GeForce 8400 M GS video card installed. When I went to put on a screensaver and use the photo option, it said "this computer's video card cannot play themes." I am very confused because before i had to reinstall windows, this option worked perfectly fine.
View 4 Replies
View Related
Feb 21, 2009
Just trying to startup my laptop but all it is doing is showing the green bar going forward and nothing else happens, I can boot into safe mode ok and have also tried last known good config and booted from the Vista disk to do a restore, but still doesn't work.
I have also gone into msconfig and disable all non microsoft services and everything in startup.
View 9 Replies
View Related
May 4, 2009
Since getting the new machine, I have had continuing problems with keeping my extra dvd drive and HDDs operating (Code 43). After getting that solved I started experiencing problems with the HDDs not starting (Code 10). The dvd drive is always recognized, starts fine and stays running. Now my HDDs either will not start or aren't recognized. On the HDDs that don't start, I get a Code 10 error.....with a little more diagnostics I get an error message that Windows can load the driver software, but the software encounters a problem when trying to run. The driver is a Windows driver 6.0.6001.18000, not a third party driver.
I have extensively verified that ALL my hardware is Vista 64 bit compatible, is operating properly, all my drivers are up to date, all cables are tight, etc. In short, I have proven that this is not a hardware failure. I have even had one dvd and one HDD connected (on different Oxford boards) and operating correctly, but after an overnight reboot, the HDDs cannot be started because of the driver software problem.
The drive manufacturer, Western Digital, refuses to support EIDE drives connected via bridsgeboards to Firewire. The computer manufactuerer (HP) is equally clueless and their Tech Support doesn't even seem to understand the problem. They cop-out by saying it's a Microsft problem. And because Vista is pre-loaded, I don't have OEM disks to try a clean install....I can only do a System Restore.
View 4 Replies
View Related
Dec 20, 2008
When I start my laptop up, just normally, I log in. I have that thing where I have to log in using a username and password, something that I downloaded and put into my registry. Anyway, all the time, when I log in, it takes forever to load up, it just stays as welcome and doesnt load. I left it for half an hour and it still hadnt loaded! So, I turned it off and on again, and it worked. But, a couple of times, I had to turn it off and on about 5 times ,and when it didnt load, I had to start it again in safe mode. THEN it worked. But, I hate safe mode!
View 9 Replies
View Related
Jun 20, 2008
I have a Dell Inspiron running Vista. Had no problems until recently when the screensaver started to refuse to work. Even when I go to screen saver settings and select preview the screensaver just comes on for less than a second and goes off again.
I have got a wireless mouse but have always used it, I have tried unplugging it, but to no avail. I have also tried a selective startup with only microsoft programs on startup, but still no joy.
View 6 Replies
View Related
Jun 9, 2009
When I try to re-start Windows, the computer shuts down and try to start but instead beeps three times and don't start, then I have to press the power button to shut it down and wait about 10 minutes before starting again.
I have Windows Vista x64 on an Asus P6T Deluxe Intel X58 motherboard with 12GB RAM and an Intel i7 Extreme processor 965 with a Sceptre widescreen 22" monitor and a Thermaltake V1 cooling Fan with 800 watts power supply
View 6 Replies
View Related
Dec 13, 2008
Earlier today my computer had updates to intall so i clicked to install updates and shut down. This evening when I went to turn on my computer it said that iy had to run disk chk as it did this it said that file after file was corrupt and repairing this took a few minutes. After this the normal log in screnn appeared. I clicked on my name typed in my password then the screen went black and the pop up went as follows
Windows Activation
Reinstall Windows
Windows must be reinstalled to activate. Insert the windows installation DVD or CD into your computerto begin the reinstallation process.
I placed the cd in and nothing happened. I then started in safe mode and tried a system restore, but then I found I have no system restore points anymore. I tried to start with last known good start up but the same message appeared. I do not want to have to do a clean install as I have important work on my computer which isn't backed up.
View 6 Replies
View Related
Jul 8, 2008
I just installed a new video card MSI NX8800GT on a new Packard Bell that came with Vista pre-installed. I checked power supply which was sufficient (400w). Everything went smoothly also when installing the drivers which came on an MSI CD. When restarting the PC he blocked when he was on the desktop screen. After that it has been impossible to restart the pc. He blocks even before he starts uploading vista.
View 7 Replies
View Related
Mar 23, 2008
For some reason, Vista crashes as soon as a DVD (hardware or virtual) starts to play (BCCode e3). LiveTV and AVI play without any problem.I deinstalled some programmes, one of which was Nero 6 Express.This Nero was incompatible, but wanted to try it anyway. Although i cannot pinpoint the cause of the crashes, but i suspect my Nero experiment. Anybody any 'serious' clue of how to fix this?
View 4 Replies
View Related
May 2, 2008
When I attempt to start stopped services, ThinkVantage task scheduler, in the Task Manager on a Thinkpad R61i with Vista, an error message says "Access Denied". If I try to start the services from Control Panel > Administrative
Tools > Services, the PC hangs.
View 9 Replies
View Related
May 9, 2009
Hello, I came accross your forum and decided to give it a try since I saw the helpful people posting in other threads. I've asked this question in many other forums but no one seems to know whats wrong. For a few days now my PC would start and get to a black screen with a blinking "_" in the upper left corner. I would turn it off then turn it on again and it would work. I figured I'd just clean the dust out of it and do a factory restore later on (which I did).
But since yesterday, I've had to do 4 or 5 restores to set it to factory condition. It gets to the point where I get to that screen and I wait 5 or 10 minutes, then the screens says "fail to boot disk, please insert disk" or something. so I place in the disk that my PC promted to make when i first got it (for restoring and repairing it and such) and then everything works again. but eventually with all the automatic updates i have to restart of course, and it starts up again fine, but
after about 2 or 3 restarts it fails again.........
View 9 Replies
View Related
Mar 1, 2008
i got a new graphic card installed in my computer, but when i hooked everything back up and started it up, it didnt really "start", bcuz the monitor goes blank on me then i restart it again and i get the same results.
View 5 Replies
View Related
Jan 3, 2009
i recently bought a new 500GB SATA 2.5" Internal Hard Drive for my Dell Inspiron1501 using Vista Home Basic 32Bit. I took my old hard drive and backed up all of the files i deemed nesseary on a seperate external, than shut it down, and swaped the hard drives. When i rebooted, i instered the vista installation disc, and i began to run through set-up. The error came when the box said it could not transfer files from D: Sources to C:$Windows.~LSSources, and error code 0x80070001. I have looked it up, but the only info i can find is when backing up your fils, not installing from strach. Please offer any assistance.
View 5 Replies
View Related
Feb 5, 2009
I have another problem. When I start Crysis, DooM 3 and Far Cry 2, they start in a window, even I have "full screen" enabled. But TrackMania United Forever, Worms 3D and Far Cry are starting normally. What may be the problem?
View 8 Replies
View Related
Jul 29, 2009
The Windows Event Log service does not start even though it is set for AUtomatic load. It will not even start when I go into Services and try to start it manually. The error message is: Windows could not start the Windows Event Log Service on Local Computer. Error 1079: The account specified for this service is different from the account specified for other services running in the same process. The Network connection the Internet does not start at boot time. Instead I have to click Diagnose & Repair and then click Restart the DHCP client service. Then it works.................
View 6 Replies
View Related
May 16, 2009
my niece's Laptop is going into hibernation when she go's to log on. As far as i know vista isnt starting up at all.she's using vista home premuim 32bit.
View 8 Replies
View Related
Apr 7, 2008
Restarting a PC (DELL Inspiron 530 running Vista Home Premium) after check-disk run on start-up starts Windows to the 'Welcome' screen. However, logging into any of the user accounts initially produces the next 'Welcome' screen and the little 'wait' circle but then it goes black and only the white cursor is displayed, nothing else happens. In safe mode, the user account loads normally.
Prehistory: The PC had started to do odd things a while ago: take very very long to shut down, more or less freeze on some of the limited user accounts (the boys'), not shut down at all, and similar. Today, as a further attempt to right things, I ran the MS Disk Cleanup (normally I use CCleaner) and Check Disk option on start-up. That reported quite a lot of problems and fixes and took a long time.
View 5 Replies
View Related
May 30, 2008
I am not on my computer everyday due to illness. So when I sign on to get my computer up and running, it says that I have not run my Windows Defender for over 3 days and it should be done. I have it in "Automatically to run daily at 5:00AM." I am wondering if it is not running because the computer is not turned on at this time? When I then hit scan, it does do a full scan without any problems. I am wondering why , if you have any ideas why it is not doing it "Automatically". Have I done something wrong? I have gone into tools and checked, and it is set for what I stated above.
View 6 Replies
View Related
Apr 20, 2008
we have quite a few games that my family play regularly and for some reason these, on a regular basis, minimise themselves. Although you just maximise and carry on it really gets annoying.
View 4 Replies
View Related
Jun 3, 2009
I have a prolem with vista ultimate 64 bit at startup it always stuck and i mean stuck like you cant move the mouse or keyboard not a program stuck, so i have to press reset to reboot it.
here is a list from the msconfig of the programs run on startup, what program do you think i should try cancel to check if it stucking my pc? 'ImageShack' (http://img141.imageshack.us/my.php?image=34870023.jpg) 'ImageShack' (http://img141.imageshack.us/my.php?image=80193573.jpg)
View 4 Replies
View Related
May 2, 2010
I have noticed that one newsgroup consistently shows the list of headers
starting several rows down from the top, while all others work correctly.
This is just a minor annoyance, but any ideas why this is happening and how
to correct it?
I was using Outlook Express on my XP machine until it died, so I switched
everything to my Vista laptop which has Microsoft Mail. It seems just about
the same, but all the emails and contacts are now separate files rather than
the old MDX format. I found some software that can be purchased that will
extract the emails into the new EML format, but I would think Microsoft
would have a built-in or freely available utility to do this, since both are
their products and included in the OS. Can I also install OE on my Vista
computer and then save emails as EML?
View 9 Replies
View Related
May 7, 2009
Does anybody know of a bittorent program that you can set start times and finishing times ? (times to download between)
View 9 Replies
View Related
