I have been trying to copy some folders from external HDD and whenever I do it, I receive the message. I noticed that if the folder is not big, the copy is completed, but if it is a little big, I receive the message. I also have tried to use drag-and-drog, but it is the same thing.
View 9 RepliesMemory DiagnosticsIf Vista detects a memory problem in your system such as a faulty RAM module, it will display a notification asking if you want Vista to try to diagnose the problem.Then again you may also recieve the sudden BSOD with the error MEMORY MANAGMENT at the top. You can manually run this tool anytime just typememory in the search box inside the start menu.This tool offers you two options: restarting immediately and checking for problems, or running next time you reboot your machine (the memory diagnostic tool must run at boot time).
Network DiagnosticsWindows Vista also allows you to check the connectivity of your network connection using the Network Diagnostics Framework: An infrastructure and a set of built-in and extensible components that attempts to automatically diagnose and correct network connectivity problems. The usual way to run this check is to open Network Center and click the Diagnose Internet Connection link on the left Vista will either identify ............
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit, but the available memory shown in the system is still 3.3 GB. Why is this and is there a way to make the full 4GB available? It's possible that my video card is using RAM instead of its own RAM. If I install a video card with its own RAM, will the full 4GB be available?
View 9 Replies View RelatedI have a problem with Vista Ultimate x64 SP1, I always seem to lose all my free RAM within an hour regardless of system activity, even while idling. I have noticed an svchost.eve process runs each time I reboot which seems to bloat constantly although when I close it down it only frees up about 800MB, what's happening to the rest of my 8GB??? When I launch Task Manager it says I'm only using 10% Memory but free RAM sits at 0?!?!
View 9 Replies View RelatedI had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked on usenet and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit (I did clean install of course), but the available memory shown in the system is still 3.3 GB. This is show in both task manager under performance->Physical memory->total, and 'property of My Computer'->Installed memory (4GB/3.3 GB usable)........
View 7 Replies View RelatedI am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies View RelatedI'm running Vista 64 Home (SP1) Premium on a homebuilt machine w/8GB (4 X 2GB modules). Windows is reporting 8 GB of Installed Physical Memory but is reporting only 4 GB of Total Physical Memory. I first noticed this when, after installing a game, the game system specs said 3092 MB of RAM.
I have checked the BIOS and it recognizes 8 GB. Memory Remapping is Enabled. Under Memory Remapping is "PCI MMIO Allocation: 4GB to 3328 MB" (?). MSConfig Boot Options shows Max Memory is not checked and no value in the box below. I tried enabling it and using 8192 as the value, but it made no difference. DxDiag shows 8 GB installed RAM. how I can get windows to make available all 8 GB of RAM? (Motherboard is ASUS Maximus II Extreme w/Intel Q9550 processor running at Q9650 clock speed, memory running at 1127 MHz
what should I put in for the type of incoming and outcoming servers for my PC
View 7 Replies View RelatedOpen it by ultraISO then extract it in a new folder in your desktop n then run the setup.exe wait until they do there job hahaaa... its working for me after the installation complete. 100% u can see 3.5gb change to 4gb
View 5 Replies View RelatedI performed the complete PC backup but I don't know if it worked and if it did, what discs are valid. It was a confusing process. I have 36 GB to backup and it said it should take 3-5 DVD discs. When I inserted the first disc it said to label it, including the date and time of the backup followed by "1". It did the same thing four times, and each time the progress bar started from the beginning. After the fourth disk, it finally went through verifying the disc and the progress bar went further. It told me to label backup was complete. The last two discs are readable but the other three are not. Did the system back up all 36 GB on two DVDs? If there were errors writing to some discs then it should tell me that the discs are not part of the backup set.
View 7 Replies View RelatedI went to see when the last time my complete PC image was made, on boot up I entered F8 and went to repair PC and went to complete PC backup. There was none made. So I rebooted and went to backup and restore center to make one. There is no backup button. Is this because I have home Premium? It's not offered on Home Premium. Is there a Freeware program that I could use to make it appear on the System repair menu?
View 4 Replies View RelatedI downloaded en_windows_vista_enterprise_with_service_pack_1_x64_dvd_x14-55934.iso and burned it to a DVD. Then I ran SETUP.EXE on a 64-bit Vista system. The installation ran as an UPGRADE for hours. Literally hours. When I awakened in the morning, the computer was stalled in the cleanup phase of installation. I power cycled the computer. Vista decided the Upgrade was a failure and reverted to the state before the Upgrade started. I see no reason for this behavior.
View 4 Replies View RelatedI have windows vista home premium 32 bit, with nvidia geforce 7100 GS. I have tried loading myst uru complete chronicles, and nothing happens. I don't know that much about computers, what can i do to load this game, as i have completed all the other myst games apart from the path of the shell. I'm that obessed with the myst games, if all ele's fails i will just have to buy another computer that runs on windows xp.
View 9 Replies View RelatedI have an issue with Vista SP1 installing (No seriously! Nobody else having the issue, right??). It gets through 100% of stage 3 of 3, then after a minute or two says the "Setup did not complete. Reverting changes." message. Before the Microsoft super wizard got on the phone with me, I had already done a memory scan, chkdisk, scannow, file cleanup, defrag, nothing helped (I have Home Premium, and I do have the two required updates installed as well). When he connected to my computer, he tried to install right off the bat (a stupid thing to do, considering I wouldn't be calling if I didn't have the issue) and it of course failed. Then after checking to make sure no antivirus etc was active (which I uninstalled the day before) he disabled all non-Microsoft services from startup and disabled my TV card, sound card and graphics card, then tried again. Still didn't install. Lastly he installed some kind of tool from Microsoft's update site and tried to install SP1 again, this time from the standalone 500+mb version. No luck.
He scheduled a call today between 3 and 5pm from one of their research and developement team members to get deeper into the problem, but do any of you have any ideas what's going on?
Here is my computer and it's specs: ...
Today, I was forced to use my Vista Ultimate installation disc to reinstall Vista - since yesterday morning, my computer was not able to get out of a loop (first going to Windows Error Recovery and then, when selecting any of the options, going to the green loading bar, where it the green bar stopped moving about 2/3 of the way, and going back to Windows Error Recovery).
The installation went smoothly enough, but I am absolutely clueless how to get my computer to roughly the same conditions it was before this fiasco. Fortunately, it would appear that all of my files and folders from before this re-installation have been saved in the folder Windows.old. However, I am at a complete loss as to how to reconfigure my Internet connection, how to restore my previous screen resolution (there are now only three options for resolution under Display Settings), and essentially getting the basics back in order.
I run Vista Home Premium and have been informed that it has built in backup capability to make a 'dic image' of my entire computer similar to what "Ghost" does.
however, I cannot locate the starting point which I was told is under the 'system and maintenance' heading in Control Panel. in my control panel there is no such system and maintenance setting.
now i know there is an automatic way of backing up files and folders using windows vista but i was wondering if there was a way of automatically backing up my complete system. now i've tried using Acronis True Image for this but i'm afraid that i won't be able to restore if my boot drive gets corrupt or i don't have an OS to installed Acronis to and load the back up image.
View 9 Replies View RelatedI try to do a backup and after selecting the drive I want it backed up to and
it starts, almost immediately I get the following: The backup failed. Failure in a Volume Shadow Copy Service operation. (0x807800A1). Additional Information: The writer experienced a non-transient error. If the backup process is retried, the error is likely to reoccur. (0x800423F4). I'm running Vista Ultimate 64 and the drive I'm trying to back up to is just a secondary SATA drive.
I have tested the Complete PC Backup feature several times. It bombs out 75% of the time. Has anyone experimented with this feature? What were your results?
View 9 Replies View RelatedThe hard drive was of SATA type. I attempted to use VHD file to migrate the system from the old hdd to the new hdd but failed. The following was the steps taken:
1. Created a VHD file on the laptop machine and stored it on an USB interfaced external hdd.
2. Temporarily installed the new SATA hdd on a desktop machine and created partitions including data partitions.
3. Moved the VHD file to one of the data partitions on the new hdd.
4. Replaced the old hdd on the laptop machine with the new hdd.
5. On the laptop machine, the first primary partition of the new hdd was set active since the Vista system was installed on the first partition of the old hdd.
6. Started the laptop machine, let the system boot from the installer DVD and selected "Repair".
7. "PC Complete Restore" was selected. The installer located the VHD file and the restore process began.
Then the following message was displayed:
The Windows Complete PC Restore operation failed.
Error details: The parameter is incorrect.(0x80070057)
I want to build a PC. I've browsed around the 'net looking for information on Complete PC Backup. The only thing that I've found on the 'net explains how to do a backup & restore. I've browsed around the Microsoft Vista discussion groups & found out that it is possible to do incremental (I wish that it would do differential instead of incremental backups.) as well as full backups.
Can I give the backup files names or does Windows? For example, before I install certain software can I give the backup a file name such as "before installijng XYZ software"? The way I understand it with incremental backups, the full backup has to be restored first & then the incremental backups are restored next starting with the oldest & proceeding to the latest. Since the Complete PC Backup does incremental backups, does the Restore wizard restore the incremental backups in order?
When I use my Windows Mail (Vista) there are a few of my contacts that will 'auto complete' but not all of them. I have the setting set properly, and some work. I have about five that begin with "J" and only one of them will auto complete. On the others I have to type the entire address.
Backup did not complete successfully. I am running Business Vista 32bit on a HP Compaq desktop with 3 GB of RAM and 100GB hard disk drive. Over the past two months I have had my document folder backed up to a W2K Server folder-automatically. Last week, I got the following error message: "The backup did not complete successfully. A shadow copy could not be created for the following reasons: Incompatible version of the serializing package (0x81070724)."
I went to another Business Vista computer on the same network, and backed up to the same Server folder (Userbackups) without any problems. I am not interested in Acronis True Image 2009. I would like to continue using the automatic backup feature that came with Vista.
I'm new this process and am hoping that someone can lend a hand. I understand how BIOS flashing works and the risks involved, but I'm not sure how to find the file to dl and how to actually complete the 'flash'.
View 7 Replies View RelatedI have a 1 TB Samsung hard drive divided into 3 partitions of C:, E:, and F: When I try to run Windows Complete PC Backup, it automatically selects C: and E: It lists E: as a system drive, even though it has no OS on it and I only use it for data backups. I only wish to backup C: as it has the OS and installed programs (I use a different process to back up other data).
View 5 Replies View RelatedI imported my contact list from Outlook on my old computer to Windows Mail on my new computer. Sometimes the auto complete works when I start to type an address into the address bar, and sometimes it doesn't.
View 4 Replies View RelatedI am looking for a means to create system backup of my Vista Home premium version in case I shall ever have to reinstall the system, for instance on a new harddisk. The backup help on my system tells me that the tool for this task is a "PC Complete backup", but also that this is not available on Vista home versions. Apparently this system backup must be burned on a CD (or DVD), but where can I find a utility that does just that?
View 4 Replies View RelatedAs long as I've worked with Computers, (about 30 years) I've never had an Operating System that was so poorly designed that I can't do anything without having to jump through multiple hoops, in order to accomplish what I need to do. I want to know how to set Windows Vista up so that I can get some work done. All of my computers are networked, (5 of them) and I am the only person who operates them. I need to be able to access any file, or folder, from any computer, on the network. I need be able to read, write, delete, cut & paste, rename, or perform any other operation, on any file, or folder, from any computer, without getting "Access Denied" messages. I own these computers, Microsoft doesn't!
As the only user, I am also the administrator, and yet I attempted for almost an hour tonight, to Rename a Folder, that I created, and I still have not been able to do that. When I go to the Help information, The Instructions are Wrong! There is no option on the "Action" Menu called "New Share," and I shouldn't need to go through using a Command Line to accomplish a task that should be simple........
I'm running Vista Ultimate 32bit and I'm trying to do another Complete PC Backup to an external 500gb USB drive and I'm getting error (0x80780048) due to not enough free space left on the backup drive. The screen before says, if there is not enough free space it will start deleting prior backups starting with the oldest. This does not seem to be the case as advertised! I do scheduled regular data backups once a week and every month or more I also do a manual Complete PC Backup. Is my only resort to reformat my external
500gb backup drive and start over with a fresh complete pc backup until the drive fills up again? I thought this was a cool feature with Vista Ultimate (which made me buy it over the Premium edition) but it does not automatically delete the oldest backups to make room?
New to Vista windows mail. Really hate some of the changes, especially the email address showing on address line--but will make do. Can't find a solution to: We have the option for auto complete when starting the email address, and mine is checked, but the function doesn't work. Anyone have a clue?
View 9 Replies View Related