I'm running Vista Ultimate 32bit and I'm trying to do another Complete PC Backup to an external 500gb USB drive and I'm getting error (0x80780048) due to not enough free space left on the backup drive. The screen before says, if there is not enough free space it will start deleting prior backups starting with the oldest. This does not seem to be the case as advertised! I do scheduled regular data backups once a week and every month or more I also do a manual Complete PC Backup. Is my only resort to reformat my external
500gb backup drive and start over with a fresh complete pc backup until the drive fills up again? I thought this was a cool feature with Vista Ultimate (which made me buy it over the Premium edition) but it does not automatically delete the oldest backups to make room?
I did a complete PC backup of my system onto an external USB HDD using the backup facility in VISTA Ultimate. When I went to do a complete PC restore I am told form the Help info on VISTA Ultimate to restart my computer, push F8 and choose the 'repair' option to run the restore. WHen I do this I get the safe mode options, debugging mode etc etc but there is no 'repair' mode. How do I get to the repair mode??
I always use vista complete backup (Disk Image) to backup both my hard disks, but I am a bit confused as to the restore options. Basically, I have a sneaky suspition that one of the drives is going to fail in the near future, so I backup quite regularly, but when I replace it, I want to get a bigger drive, as it's only a 150gig raptor, and I really would prefer a 500 or 1TB 7200rpm drive for storage.
Can vista restore the files I backed up on D: (the 150gig) to a new D: which would be a large disk ? If it can, could I also do the same for C: which is where vista is located? If that doesn't work,
I performed the complete PC backup but I don't know if it worked and if it did, what discs are valid. It was a confusing process. I have 36 GB to backup and it said it should take 3-5 DVD discs. When I inserted the first disc it said to label it, including the date and time of the backup followed by "1". It did the same thing four times, and each time the progress bar started from the beginning. After the fourth disk, it finally went through verifying the disc and the progress bar went further. It told me to label backup was complete. The last two discs are readable but the other three are not. Did the system back up all 36 GB on two DVDs? If there were errors writing to some discs then it should tell me that the discs are not part of the backup set.
I run Vista Home Premium and have been informed that it has built in backup capability to make a 'dic image' of my entire computer similar to what "Ghost" does.
however, I cannot locate the starting point which I was told is under the 'system and maintenance' heading in Control Panel. in my control panel there is no such system and maintenance setting.
I try to do a backup and after selecting the drive I want it backed up to and it starts, almost immediately I get the following: The backup failed. Failure in a Volume Shadow Copy Service operation. (0x807800A1). Additional Information: The writer experienced a non-transient error. If the backup process is retried, the error is likely to reoccur. (0x800423F4). I'm running Vista Ultimate 64 and the drive I'm trying to back up to is just a secondary SATA drive.
I have tested the Complete PC Backup feature several times. It bombs out 75% of the time. Has anyone experimented with this feature? What were your results?
I want to build a PC. I've browsed around the 'net looking for information on Complete PC Backup. The only thing that I've found on the 'net explains how to do a backup & restore. I've browsed around the Microsoft Vista discussion groups & found out that it is possible to do incremental (I wish that it would do differential instead of incremental backups.) as well as full backups.
Can I give the backup files names or does Windows? For example, before I install certain software can I give the backup a file name such as "before installijng XYZ software"? The way I understand it with incremental backups, the full backup has to be restored first & then the incremental backups are restored next starting with the oldest & proceeding to the latest. Since the Complete PC Backup does incremental backups, does the Restore wizard restore the incremental backups in order?
Backup did not complete successfully. I am running Business Vista 32bit on a HP Compaq desktop with 3 GB of RAM and 100GB hard disk drive. Over the past two months I have had my document folder backed up to a W2K Server folder-automatically. Last week, I got the following error message: "The backup did not complete successfully. A shadow copy could not be created for the following reasons: Incompatible version of the serializing package (0x81070724)."
I went to another Business Vista computer on the same network, and backed up to the same Server folder (Userbackups) without any problems. I am not interested in Acronis True Image 2009. I would like to continue using the automatic backup feature that came with Vista.
I have a 1 TB Samsung hard drive divided into 3 partitions of C:, E:, and F: When I try to run Windows Complete PC Backup, it automatically selects C: and E: It lists E: as a system drive, even though it has no OS on it and I only use it for data backups. I only wish to backup C: as it has the OS and installed programs (I use a different process to back up other data).
I am looking for a means to create system backup of my Vista Home premium version in case I shall ever have to reinstall the system, for instance on a new harddisk. The backup help on my system tells me that the tool for this task is a "PC Complete backup", but also that this is not available on Vista home versions. Apparently this system backup must be burned on a CD (or DVD), but where can I find a utility that does just that?
I would like to *manually* save different versions of Complete PC Backup, but Vista won't give me that option and will only save incremental backups. As someone noticed here on the forums, "using the *scheduled* backup is the only way to get the checkbox to create full backups, each and every time you want one". However, scheduled backups is not what I want to do, as I'm losing control of the exact PC versions. Can I rename the earlier backup to something else (eg. "WindowsImageBackup1"), so Vista would create a new folder "WindowsImageBackup" and save a new full backup into it? If yes, when I rename the folder from "WindowsImageBackup1" back to "WindowsImageBackup" in order to restore the earlier version of PC, will it get corrupted or confuse Vista?
when I try to make a complete backup of the computer, after a few minutes i get the following error The backup application could not start due to an internal error: Server execution failed (0x80080005). files backup works perfectly
Want to do a complete PC backup for my newly purchased notebook, however, i started to do the backup to dvd, it seems it never ended, and kept prompt me to insert a blank disk. I have two partitions in one single hard drive, drive c is the system partition, drive d is the backup image of my notebook for recovery, Control panel -> system and maintenance -> Back and restore center -> Back up computer -> DVDRW Drive, it said it will take 4 to 7 dvds, however, it still continued to prompt me to insert a blank disk after the 9th dvd, then i stop manually, Is it normal? How can chase the backup log? Should I skip the recovery disk from the backup?
If I do a complete backup on my Vista Ultimate laptop and do the restore to a larger hard disk, will it work? I have read differing reports of whether it will or not.
upgrade HD from 60G to 250G without having to reinstall all files and programs. Windows Complete PC Restore cannot see DVD with backup image file
1. Backed up C: using Windows Complete PC Backup. (6 DVDs no errors.) 2. Removed old HD and inserted new. 3. Booted Windows Vista install DVD. (I proceeded to partition HD but did not complete the install.) 4. From Windows Recovery Environment, I chose Windows Complete PC Restore. 5. Inserted Backup image DVD disc1. 6. When it looked for the location of the image it couldn't find it so it fails.
The backup is not failing, it says it's complete, but the file that it creates is less than 70GB, and my drive is 225GB full out of 279GB. The machine is running Vista Ultimate and running Vista Media Center. 157GB of the files are recorded shows, my music and pictures. I'm expecting a file closer to 225GB, especially since media files don't compress well (if this program compresses).
I find it awfully coincidental that 225 - 157 = 68, which is about the size of my backup file. The bigger problem is that I can't use the backup it creates. When I go to the restore operation, it finds the backup, I hit start and get back Restore Failed, element not found 0x80070490, which leads me to believe the backup is incomplete.
I've been trying to back up my laptop since I bought it last year, but the first time I did it, it said "backup failed" (I didn't look at why, just gave up) and since then, every week when it does its sad little attempt to back up, it says "last backup failed".
I finally decided to give it another crack tonight, but when I looked at the D drive, it said that I only had 1.28GB free of just over 5GB. I looked in the file to see if there was anything I could get rid of so I could start from scratch, but apparently there's nothing in there apart from the little RECOVERY file (87kb) which it says I shouldn't touch, so I'm not going to!
I am completely computer deficient and I have no idea about anything! I'd be really grateful if someone could give me a clue (in Vista Backup for Dummies terms) as to what's happening here and how I can FINALLY back up my laptop, and maybe even begin to love it like I should!!
I have an external Seagate 400 Gb drive I use for Backups, using the Vista Ultimate Backup. Have made total backup and then daily backups of files that have altered. All of a sudden the backups are failing despite there being 200 Gb free. It fails at unable to create shadow copy insufficient space.
My backup drive D in Windows Vista is full up and I can't seem to be able to empty it or allocate more space to it. It only has 9.99GB of space allocated to it and my computer is now complaining that it can't backup. Does anyone know how to allocate more space to it, or should I just delete everything on it?
I do weekly full backups to an 300 GB external USB hard drive with the built-in Windows Vista backup program. On my entre C: drive I've only used about 100 GB, and this of course includes both the OS, apps, and user data files. I just looked at the J: backup drive in Windows Explorer and the pie chart of Properties is showing the Used Space as 200 GB which really surprises me. I don't get this. On this backup drive there's only a single parent folder called RICK. The Properties of this folder shows only 21 GB of files. Yet Properties of the drive itself shows a pie chart of 200 GB Used Space.
Something is taking up a lot of extra space on the backup drive and I'm not sure what it is. I did a Disk Cleanup which found a Recycle Bin that hadn't been emptied out, but that only released about 15 GB. If this is any clue: before doing each full backup I manually delete the previous week's backup from the hard drive.
my computer says that my recovery(d) is full. i dont know about computers and i dont want to mess up anything. when i try to do a backup it says fail because recovery (d) doesnt have enough space. what should i do? can you also please tell mewhen i do a backup where should i have it go too. ?? I hope i dont confuse anyone as for myself im already there!!!
Windows Vista has loads of new backup features such as previous versions of your documents and system state points that are part of System Restore. All of these features are turned on by default and offer you a great deal of backup protection. However, you pay a big price in disk space. Every once in a while when your system is stable and you need to free up some disk space, it is a good idea to clear all of these previous versions of your files and System Restore points from your computer. This is a very easy way to free up a few gigabytes of space across all of your hard drives.
I am running Windows Microsoft Home Premium. My weekly scheduled system backup has been failing since mid December 2008. The message I get is: "The backup did not complete successfully. An error occurred. The following information might help you resolve the error: Access is denied. (0x80070005)"
This failure is soon followed by my ZoneAlarm anti-virus software picking up on "Exploit.Java.ByteVerify" I delete this "virus" as per instructions. I have manually intiated a backup which also fails. I have used restore points dated before this problem began, to no avail. I have Googled looking for solutions, and have found similar, but not identical problems. And I am not technically informed enough to try a solution if the problem does not exactly match mine.
I just bought a brand new 1TB external hard drive to backup my computer with. verytime I try to back it up, after fifteen seconds I get an error msg saying:
"The backup copy did not complete successfully." "A shadow copy could not be created for the following reasons There is not enough space on the disk (0x80070070)"
I am only using about 200GB of my computers space and I am pretty sure 1TB is enough space. When I start the backup, It says it is sending it to my J drive (which is my external)
Vista Business (32bit). Complete PC Backup to External (USB 2.0) DVD-Rw Drive (Lite-On DVDRW SHW-160P6S with latest driver installed) just "hangs" (ie. DVD-R disk number 1) After the 1st DVD is apparently full, won't Eject the DVD for another "blank" DVD. Manual Eject button doesn't work with "Complete PC Backup"; works OK with other programs. Tried this with non-formatted and formatted "blank" DVD-R disks same "hang". Have to just "Stop Backup" program to get out of this. PC's internal "D:" drive is DVD read/CD read/write drive. Is DVD disk type (DVD-R) a factor ? Is there a fix for this other than replacing the internal "D:" drive with one that writes DVDs or getting some other "complete PC backup" software ? Incidentally, the PC BIOS has been updated.
I have a 320 GB HD. When I checked it, I only have 25 gigs of free space. However I can only find about 180 gigs of files/data. Any ideas as to how I lost 100 gigs of available of space? Just a couple of weeks ago I checked and I had plently of space. No recent installs, only recent changes are the removal of Mcaffee monitoring software and running JkDfrag.
i reformatted my whole c drive and then clean installed vista ultimate onto it and at start i had 268Gb out of 274Gb. now its gone to 243Gb and i've only installed a couple of programs and when i highlight everything in the c drive it says its 7.38GB. I've Defragged it a lot of times and the space keeps on going down.
I have a 720GB internal drive that I've maxed out with automated weekly backups. I have another drive with a lot of space, and my question is, can Vista backup be set to continue the existing backup onto an additional drive. In other words, the backup files would be spread over two drives?
