I would like to *manually* save different versions of Complete PC Backup, but Vista won't give me that option and will only save incremental backups. As someone noticed here on the forums, "using the *scheduled* backup is the only way to get the checkbox to create full backups, each and every time you want one". However, scheduled backups is not what I want to do, as I'm losing control of the exact PC versions. Can I rename the earlier backup to something else (eg. "WindowsImageBackup1"), so Vista would create a new folder "WindowsImageBackup" and save a new full backup into it? If yes, when I rename the folder from "WindowsImageBackup1" back to "WindowsImageBackup" in order to restore the earlier version of PC, will
it get corrupted or confuse Vista?
Using the automated Vista files backup I am getting very large backups - 50Gb - weekly. It should only be backing up new files and files that have changed. Why is it backing up files that have not changed for years? I have seen several other posts on discussion forums but no explanation or solution. I am running Vista Ultimate 32-bit and am up-to-date on hotfixes.
I did a complete PC backup of my system onto an external USB HDD using the backup facility in VISTA Ultimate. When I went to do a complete PC restore I am told form the Help info on VISTA Ultimate to restart my computer, push F8 and choose the 'repair' option to run the restore. WHen I do this I get the safe mode options, debugging mode etc etc but there is no 'repair' mode. How do I get to the repair mode??
I always use vista complete backup (Disk Image) to backup both my hard disks, but I am a bit confused as to the restore options. Basically, I have a sneaky suspition that one of the drives is going to fail in the near future, so I backup quite regularly, but when I replace it, I want to get a bigger drive, as it's only a 150gig raptor, and I really would prefer a 500 or 1TB 7200rpm drive for storage.
Can vista restore the files I backed up on D: (the 150gig) to a new D: which would be a large disk ? If it can, could I also do the same for C: which is where vista is located? If that doesn't work,
My niece’s laptop will not complete a full boot freezing just before I would expect to see the desktop., HP 530 Notebook with Vista Basic, Intel Celeron M 440 @1867 MHz, 512 MB Memory, Advance Boot Options (F8), Safe Load loads to screen immediately prior to desktop. (Black screen with Safe Load at all corners.), Safe Load Command Prompt Loads to Safe Load Black screen but no prompt., Normal Load goes to Welcome screen and shows the wait symbol. By using “Repair Your Computer” option:
1. I tried restore points but did not resolve issue and restore points disappeared once I tried to restore prior to Service pack 1 2. I can access the command prompt. I can change directories and do directory listings. 3. Individual partitions are c: d:ecovery and e:sources. There is reference to x:windowssystem32 789 files and 71 Directories taking about 146 MB. there appears to be unnamed directories in d: & e: Owing to previous problems – now resolved – a back up or restore disk was not made. We have the Vista disks downloaded from the laptop.
I performed the complete PC backup but I don't know if it worked and if it did, what discs are valid. It was a confusing process. I have 36 GB to backup and it said it should take 3-5 DVD discs. When I inserted the first disc it said to label it, including the date and time of the backup followed by "1". It did the same thing four times, and each time the progress bar started from the beginning. After the fourth disk, it finally went through verifying the disc and the progress bar went further. It told me to label backup was complete. The last two discs are readable but the other three are not. Did the system back up all 36 GB on two DVDs? If there were errors writing to some discs then it should tell me that the discs are not part of the backup set.
I run Vista Home Premium and have been informed that it has built in backup capability to make a 'dic image' of my entire computer similar to what "Ghost" does.
however, I cannot locate the starting point which I was told is under the 'system and maintenance' heading in Control Panel. in my control panel there is no such system and maintenance setting.
I try to do a backup and after selecting the drive I want it backed up to and it starts, almost immediately I get the following: The backup failed. Failure in a Volume Shadow Copy Service operation. (0x807800A1). Additional Information: The writer experienced a non-transient error. If the backup process is retried, the error is likely to reoccur. (0x800423F4). I'm running Vista Ultimate 64 and the drive I'm trying to back up to is just a secondary SATA drive.
I have tested the Complete PC Backup feature several times. It bombs out 75% of the time. Has anyone experimented with this feature? What were your results?
I want to build a PC. I've browsed around the 'net looking for information on Complete PC Backup. The only thing that I've found on the 'net explains how to do a backup & restore. I've browsed around the Microsoft Vista discussion groups & found out that it is possible to do incremental (I wish that it would do differential instead of incremental backups.) as well as full backups.
Can I give the backup files names or does Windows? For example, before I install certain software can I give the backup a file name such as "before installijng XYZ software"? The way I understand it with incremental backups, the full backup has to be restored first & then the incremental backups are restored next starting with the oldest & proceeding to the latest. Since the Complete PC Backup does incremental backups, does the Restore wizard restore the incremental backups in order?
Backup did not complete successfully. I am running Business Vista 32bit on a HP Compaq desktop with 3 GB of RAM and 100GB hard disk drive. Over the past two months I have had my document folder backed up to a W2K Server folder-automatically. Last week, I got the following error message: "The backup did not complete successfully. A shadow copy could not be created for the following reasons: Incompatible version of the serializing package (0x81070724)."
I went to another Business Vista computer on the same network, and backed up to the same Server folder (Userbackups) without any problems. I am not interested in Acronis True Image 2009. I would like to continue using the automatic backup feature that came with Vista.
I have a 1 TB Samsung hard drive divided into 3 partitions of C:, E:, and F: When I try to run Windows Complete PC Backup, it automatically selects C: and E: It lists E: as a system drive, even though it has no OS on it and I only use it for data backups. I only wish to backup C: as it has the OS and installed programs (I use a different process to back up other data).
I am looking for a means to create system backup of my Vista Home premium version in case I shall ever have to reinstall the system, for instance on a new harddisk. The backup help on my system tells me that the tool for this task is a "PC Complete backup", but also that this is not available on Vista home versions. Apparently this system backup must be burned on a CD (or DVD), but where can I find a utility that does just that?
I'm running Vista Ultimate 32bit and I'm trying to do another Complete PC Backup to an external 500gb USB drive and I'm getting error (0x80780048) due to not enough free space left on the backup drive. The screen before says, if there is not enough free space it will start deleting prior backups starting with the oldest. This does not seem to be the case as advertised! I do scheduled regular data backups once a week and every month or more I also do a manual Complete PC Backup. Is my only resort to reformat my external 500gb backup drive and start over with a fresh complete pc backup until the drive fills up again? I thought this was a cool feature with Vista Ultimate (which made me buy it over the Premium edition) but it does not automatically delete the oldest backups to make room?
when I try to make a complete backup of the computer, after a few minutes i get the following error The backup application could not start due to an internal error: Server execution failed (0x80080005). files backup works perfectly
Want to do a complete PC backup for my newly purchased notebook, however, i started to do the backup to dvd, it seems it never ended, and kept prompt me to insert a blank disk. I have two partitions in one single hard drive, drive c is the system partition, drive d is the backup image of my notebook for recovery, Control panel -> system and maintenance -> Back and restore center -> Back up computer -> DVDRW Drive, it said it will take 4 to 7 dvds, however, it still continued to prompt me to insert a blank disk after the 9th dvd, then i stop manually, Is it normal? How can chase the backup log? Should I skip the recovery disk from the backup?
If I do a complete backup on my Vista Ultimate laptop and do the restore to a larger hard disk, will it work? I have read differing reports of whether it will or not.
upgrade HD from 60G to 250G without having to reinstall all files and programs. Windows Complete PC Restore cannot see DVD with backup image file
1. Backed up C: using Windows Complete PC Backup. (6 DVDs no errors.) 2. Removed old HD and inserted new. 3. Booted Windows Vista install DVD. (I proceeded to partition HD but did not complete the install.) 4. From Windows Recovery Environment, I chose Windows Complete PC Restore. 5. Inserted Backup image DVD disc1. 6. When it looked for the location of the image it couldn't find it so it fails.
The backup is not failing, it says it's complete, but the file that it creates is less than 70GB, and my drive is 225GB full out of 279GB. The machine is running Vista Ultimate and running Vista Media Center. 157GB of the files are recorded shows, my music and pictures. I'm expecting a file closer to 225GB, especially since media files don't compress well (if this program compresses).
I find it awfully coincidental that 225 - 157 = 68, which is about the size of my backup file. The bigger problem is that I can't use the backup it creates. When I go to the restore operation, it finds the backup, I hit start and get back Restore Failed, element not found 0x80070490, which leads me to believe the backup is incomplete.
I have a dual boot system with W7 on a second HDD. I am trying to make a full PC Backup without backing up my W7 disk (because it fails the backup). The second HDD is checked in the backup settings screen, but greyed out, so I cannot uncheck it. It is not checked for file backup.
How do I exclude this disk from the Full PC Backup?
I am trying to figure out what to do when my backup location can no longer accept new backups because it is full. I tried to do a search but the "full" just brings up references to the Full Backup you can do with Windows Vista Ultimate. Any one know where I could find out best practices for doing backups. For example, do I reformat the drive my backup is on so I can do another backup? Or do I buy a bigger drive, and continue doing this as the months go by? Do I swap for another drive to continue doing my backups, and just keep buying more drives as they get filled? Do I hope that Moore's Law also applies to hard drive storage?
I want to delete the full PC complete backup from my C: drive now that I have an external drive, but cannot find it. Where does Vista put the backups on C:? How do I delete it?
I have Vista Ultimate installed on one of three HD partitions of my laptop. I want to merge the partitions into 1 partition.
For this purpose, I will use the Complete PC Backup utility, delete the existing partitions, create a single partition, and restore the computer image created earlier.
Would this be the correct procedure, or the utility is going to recreate the three partitions and my work would be useless?
I keep getting this little bubble saying my recovery D is full. I deleted a ton of files and put all of my pictures on flashdrives but that was a waste of time, it didn't help. My C drive says 218GB free of 288GB and D says 12.7MB free of 9.99GB Any idea how to fix this?
I have a 250 gig backup drive which is now full and my weekly backup is failing. the drive I am backing up shows only 133 gig used in properties why has the back up exceeded the total disk usage i am backing up. The file structure on backupo drive shows only one backup set dated 2007-08-04 within which are the weekly folders for my backups each of which contains a varying number of zip files. I am reluctant to just delete and start over but cannot see a way of managing backed up data.
my c drive it says i have 1% left ! i have used disk cleanup and defag but it didn't help ,plus i remove programe ,cookies and temp internet, can i do a recovery using my backup files? i only had this computer for one year
I had previously begun a full system backup and several of those disks were damaged. I would like to now just backup documents, pictures, music and e-mails. The backup utility will only give me two choices. 1) a full system backup or 2) a backup of the files mentioned above since the previous backup. How do I just get a complete backup of my documents, pictures, etc?
My subject on this posting may be misleading. I am actually looking for a reliable full backup solution so that I can perform the upgrade with some confidence that I won't lose everything. Vista Home Premium (also Home Basic) does not include Complete PC Backup. (It was a surprise to me too!) I need a full/complete backup solution. Otherwise, the restore task is piecemeal... and very cumbersome to do and contemplate.
Should I purchase backup software? Disk imaging software? Recommendations? I purchased a sizeable disk drive and can connect it with usb. Does the Windows 7 upgrade have any options to perform the needed backup? Not likely I imagine.
Does Windows 7 Home Premium have the same defect of no Complete PC Backup or equivalent Yeah, I think it's a bad defect! This must be the first OS without a full backup solution! Or am I missing something?
I have a WD MyBook 1TB external hard drive. It's a replacement for a LaCie drive that I broke accidentally. Because I broke my LaCie, which held all my backups, I need to do a full system backup so I have one on file. (I'm running Windows Vista Business SP1 on a Compaq Presario laptop. I've tried this both before and after SP1 and have got the same result.)
The weekly file-only backups I have scheduled with Windows Backup work fine. It's only the full system backup that gives me problems. Everything goes as planned: I select the MyBook as the destination, and Windows starts the backup. Once it gets near the end (I'd say about 90% done according to the status bar), I get the blue crash screen. Here's what it says: DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0X000000D1 (0X00000004, 0X00000002, 0X00000001, 0C807503FF)nvstor.sys - Address 807503FF base at 8074C000, DateStamp 458d543d It doesn't restart after that, it just sticks on the blue screen. I have to shut the computer off and then turn it back on to do anything.Can anyone clue me in on what might be going on? I thought maybe my driver was out of date, but Windows Update can't find a newer one, neither can it when I go into the device's properties. Unless I'm missing something there, or it's something other than a driver issue.
I'm using a combination of the Vista backup to do a complete backup of my OS and applications (for emergency restore) and another backup tool to handle my data. My OS is on C: and my data on D: (and other drives). query is that C: will contain application settings/data - for example if I write actions in Photoshop they will be stored under the user application data subdirectory or if I create a DOT template for Word it will be stored under the hidden data directories for Word.
I want to be sure that I am backing up all of the vital application data/settings so that I can either restore just those or in an emergency can restore my full Vista backup (done weekly) and then restore the application data (which I want to backup daily). I've searched this set of forums and elsewhere to find something that lists which subdirectory tree(s) I need to ensure that I have backed up (and I guess I'll need to do a registry backup too each day just in case settings are stored there). I can't find such a list. Does anyone know of a document that details what the vital stuff to backup is?
Last week I upgraded a HPxw4400X workstation from WinXP Pro w/SP3 to Vista Business. I did a full backup and also used FAST (files and settings transfer wizard). However, I soon found out that the DVD drive was "broke". HP told me it was because of the upgrade. They said to do a fresh install. Did another backup, fresh install, then a restore. Had lots of problems with BSOD, but a selective restore got it working again. But he can't see MS Office, nor navigate to it. I can see it when logged in as an admin. I thought of copying files and folders between profiles (he has 3 of 'em - , ., and ..000). The former is the oldest so I thought I could copy the App Data and User Data over it'd work (in both Documents and Settings, and Users), but it didn't work. I've been here working on various issues for 28 hours, so I'm not thinking as clearly as I'd like.
