I have a WD MyBook 1TB external hard drive. It's a replacement for a LaCie drive that I broke accidentally. Because I broke my LaCie, which held all my backups, I need to do a full system backup so I have one on file. (I'm running Windows Vista Business SP1 on a Compaq Presario laptop. I've tried this both before and after SP1 and have got the same result.)
The weekly file-only backups I have scheduled with Windows Backup work fine. It's only the full system backup that gives me problems. Everything goes as planned: I select the MyBook as the destination, and Windows starts the backup. Once it gets near the end (I'd say about 90% done according to the status bar), I get the blue crash screen. Here's what it says: DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0X000000D1 (0X00000004, 0X00000002, 0X00000001, 0C807503FF)nvstor.sys - Address 807503FF base at 8074C000, DateStamp 458d543d It doesn't restart after that, it just sticks on the blue screen. I have to shut the computer off and then turn it back on to do anything.Can anyone clue me in on what might be going on? I thought maybe my driver was out of date, but Windows Update can't find a newer one, neither can it when I go into the device's properties. Unless I'm missing something there, or it's something other than a driver issue.
I have vista home premium and a new Laptop. I need to make System Backups (complete drive c I realize that Toshiba put so much junk software on my new laptop but could not see it's way to include a System Backup.
I did a complete PC backup of my system onto an external USB HDD using the backup facility in VISTA Ultimate. When I went to do a complete PC restore I am told form the Help info on VISTA Ultimate to restart my computer, push F8 and choose the 'repair' option to run the restore. WHen I do this I get the safe mode options, debugging mode etc etc but there is no 'repair' mode. How do I get to the repair mode??
I was starting my computer today (that has Vista), and during the start up process, a black screen came up stating that there was an error opening up my external hard drive and it was checking for errors. After it finally booted up, I went to open the hard drive files, and it was totally BLANK! I then restarted the computer, and still the hard drive is EMPTY! I had ALL my important files in there!
The ONLY thing that looks promising is that when I go to Start then to Computer, it shows the hard drive there, and it still shows that 43GB are free of 111GB of storage (same info shows by right clicking on it and going to Properties). Why would it show this if nothing is on the hard drive anymore? Is there ANYWAY to recover these files again you think???? I NEED those files!!!! Remember that the hard drive STILL PHYSICALLY WORKS. It's just that I cannot access the files on my pc at the time for some reason.......
I have a firewire/USB2 external combo drive, which is my main backup drive for my laptop. Tonight it was working fine as normal and then it just went dead. I have tried both the USB and firewire connections on two different computers. The computer recognises the device after plugging it in and swtiching it on and then My Computer window freezes and the disk drive makes a rythmical clicking sound that I haven't heard before.Half of them are backed up on another external rive but I hadn't quite finished this secondary bacup process.
I have a 250 gig backup drive which is now full and my weekly backup is failing. the drive I am backing up shows only 133 gig used in properties why has the back up exceeded the total disk usage i am backing up. The file structure on backupo drive shows only one backup set dated 2007-08-04 within which are the weekly folders for my backups each of which contains a varying number of zip files. I am reluctant to just delete and start over but cannot see a way of managing backed up data.
I had previously begun a full system backup and several of those disks were damaged. I would like to now just backup documents, pictures, music and e-mails. The backup utility will only give me two choices. 1) a full system backup or 2) a backup of the files mentioned above since the previous backup. How do I just get a complete backup of my documents, pictures, etc?
my c drive it says i have 1% left ! i have used disk cleanup and defag but it didn't help ,plus i remove programe ,cookies and temp internet, can i do a recovery using my backup files? i only had this computer for one year
I currently do a complete PC backup with Vista Ultimate 32 bit to an external hard drive. I am buying a new computer with an Intel® Core™ i7-920 Processor and Intel® DX58 Chipset. I believe this is a 64 bit system. Two questions... First of all, can I restore my 32 bit files to it? and secondly, my new computer has a larger hard drive. Is the larger hard drive a problem when restoring?
I am running Vista Home Premium 32 SP3 and use an HP 500 GB Personal Media Drive (PMD) for backing up the machine. I only have 88 GB of used space on my 325 GB drive C, yet the backup of the files and folders on drive C appears to be *much* larger than 88 GB. For example, when I click on the drive letter, L, of the PMD and click Properties, I find that there is 294 GB of used space and only 171 GB of free space. I.e., over half the space on the PMD has been used up.
Yet when I use Windows Explorer to ascertain the Properties of each folder on the PMD drive, with Show Hidden System Files turned on, the content of all eight folders only adds up to approximately 4 GB of data. What is going on here? Why has so much of the PMD been taken up by what appear to be ghost files or folders? When I use Windows Explorer to check the Properties of the individual backup folders on the PMD, of which there are at least one for every day since I started using the PMD to back up my desktop, every single folder shows 0 bytes for its content. I just don't get it!
I have been successfully backing-up to my Freecom hard drive classic 3.5 500GB via Windows Live however the drive keeps on filling up rather than overwriting/updating the current data, which is what I'd assumed was supposed to happen. Is this how it goes or have I missed something? The only option I have is to delete the current data and start again every month which is a bit of a pain!
I'm using HD from my old computer (XP) as an external drive on my Vista laptop. The HD has XP on it. When I power up it looks like the HD is trying to boot XP on top of my Vista and freezes the system. How can I avoid this attempted boot? Where should I place the jumper on the HD.
I have XP Home on my desktop and it has an external Western Digital USB attached drive that I have set up as shared on the network. I also have allowed updates from netowrk users in the share settings. I can see the drive from my Vista Home Premium laptop, but when I try to access it I get an error: "drivename" is not accessible. You may not have permission to use this network resource. Not enough server storage is available to process this command.
Now I shared the internal C drive on the desktop with the same share settings and I can access that drive from Vista with no problem. The only things I can't access on the C drive are documents and settings, WINNT and other systems folders, whcih is, I assume, as it should be. Otherwise I can access all the folders and files on the C drive. I have Norton Internet Security on the desktop and Norton 360 on the laptop, but my home network is in the trusted group for both firewalls and, since I can see the drive and can also access the C drive, it doesn't appear to be a firewall problem, but some kind of permissions problem, and of course I can't set permissions on the XP Home system. Can someone explain to me what is wrong? I have been searching for days on the web for answers, but as yet have not found a pertinent answer.
I have a Vista Home Premium system that will not start. It gets as far as the system bootup progress bar, tries to start then suddenly the system shuts down. I have tried every possible recovery/repair technique I could find and still no luck. The system is using a Intel motherboard with Matrix Storage RAID which I have configured as RAID 1. In the repair console (from Vista DVD) I can read the drive from a prompt window so I assume the data is safe. I would like to back up the user data (photos, docs, email) and do a reinstall without the RAID 1 configuration. I have heard there are problems with Vista and the Matrix Storage controller.
Question is: How would I go about backing up a non-bootable Vista drive? I have another system running XP pro that I could mount the Vista drive to and copy the data to a portable USB drive. Is this a possibility? Will I run into any "access denied" issues when saving the data off to a backup drive? Also, the system was using Outlook 03 for email. What is the best way to recover the Outlook email data (messages, addresses, etc.) from a non-bootable disk? Is this email data in the same location as it is with XP?
I have a dual boot system with W7 on a second HDD. I am trying to make a full PC Backup without backing up my W7 disk (because it fails the backup). The second HDD is checked in the backup settings screen, but greyed out, so I cannot uncheck it. It is not checked for file backup.
How do I exclude this disk from the Full PC Backup?
I am trying to figure out what to do when my backup location can no longer accept new backups because it is full. I tried to do a search but the "full" just brings up references to the Full Backup you can do with Windows Vista Ultimate. Any one know where I could find out best practices for doing backups. For example, do I reformat the drive my backup is on so I can do another backup? Or do I buy a bigger drive, and continue doing this as the months go by? Do I swap for another drive to continue doing my backups, and just keep buying more drives as they get filled? Do I hope that Moore's Law also applies to hard drive storage?
I want to delete the full PC complete backup from my C: drive now that I have an external drive, but cannot find it. Where does Vista put the backups on C:? How do I delete it?
I have Vista Ultimate installed on one of three HD partitions of my laptop. I want to merge the partitions into 1 partition.
For this purpose, I will use the Complete PC Backup utility, delete the existing partitions, create a single partition, and restore the computer image created earlier.
Would this be the correct procedure, or the utility is going to recreate the three partitions and my work would be useless?
I keep getting this little bubble saying my recovery D is full. I deleted a ton of files and put all of my pictures on flashdrives but that was a waste of time, it didn't help. My C drive says 218GB free of 288GB and D says 12.7MB free of 9.99GB Any idea how to fix this?
I would like to *manually* save different versions of Complete PC Backup, but Vista won't give me that option and will only save incremental backups. As someone noticed here on the forums, "using the *scheduled* backup is the only way to get the checkbox to create full backups, each and every time you want one". However, scheduled backups is not what I want to do, as I'm losing control of the exact PC versions. Can I rename the earlier backup to something else (eg. "WindowsImageBackup1"), so Vista would create a new folder "WindowsImageBackup" and save a new full backup into it? If yes, when I rename the folder from "WindowsImageBackup1" back to "WindowsImageBackup" in order to restore the earlier version of PC, will it get corrupted or confuse Vista?
I have a problem currently with Windows Vista Ultimate(Integrale), this occurred last Friday evening. I was finishing off a word document when suddenly all went black. As an end user I assumed this was a system crash and so rebooted my system, then ran registry repair, then checked for viruses etc with Live OneCare, eventually reloaded Vista all to no avail. Each time I rebooted I was greeted by a black screen after logging in.
I called my tech support who could not help but I did manage to gain access to the internet and after a short while found an item entitled Black Screen Death. This reported that all my problems where due to Microsoft thinking I had a non genuine copy of Vista it went on to explain how you could circum-navigate the problem (this I did and even though I have to repeat this process each time I log on I can use Windows normally). I purchased my copy of Vista Ulitimate from a large chain store at the not give away price of over 400 Euros and registered the same online on the day of installation and have been running for sometime with other Microsoft products including Live OneCare. Why then am I suddenly crippled for an entire weekend by Microsoft security and how can I rectify the situation perminently
My subject on this posting may be misleading. I am actually looking for a reliable full backup solution so that I can perform the upgrade with some confidence that I won't lose everything. Vista Home Premium (also Home Basic) does not include Complete PC Backup. (It was a surprise to me too!) I need a full/complete backup solution. Otherwise, the restore task is piecemeal... and very cumbersome to do and contemplate.
Should I purchase backup software? Disk imaging software? Recommendations? I purchased a sizeable disk drive and can connect it with usb. Does the Windows 7 upgrade have any options to perform the needed backup? Not likely I imagine.
Does Windows 7 Home Premium have the same defect of no Complete PC Backup or equivalent Yeah, I think it's a bad defect! This must be the first OS without a full backup solution! Or am I missing something?
I'm using a combination of the Vista backup to do a complete backup of my OS and applications (for emergency restore) and another backup tool to handle my data. My OS is on C: and my data on D: (and other drives). query is that C: will contain application settings/data - for example if I write actions in Photoshop they will be stored under the user application data subdirectory or if I create a DOT template for Word it will be stored under the hidden data directories for Word.
I want to be sure that I am backing up all of the vital application data/settings so that I can either restore just those or in an emergency can restore my full Vista backup (done weekly) and then restore the application data (which I want to backup daily). I've searched this set of forums and elsewhere to find something that lists which subdirectory tree(s) I need to ensure that I have backed up (and I guess I'll need to do a registry backup too each day just in case settings are stored there). I can't find such a list. Does anyone know of a document that details what the vital stuff to backup is?
I have a 720GB internal drive that I've maxed out with automated weekly backups. I have another drive with a lot of space, and my question is, can Vista backup be set to continue the existing backup onto an additional drive. In other words, the backup files would be spread over two drives?
Special offer for GAOTD users! Paragon Drive Backup 2010 Special Edition - English-version offers more safety to all your important data including videos, images, music files, documents and applications. Find other extra features onboard this toolkit along with a Windows 7 and 64-bit Operating Systems support. What we offer:Complete set of features for entire disk imaging and file Backup; Backup to any destination: Including local mounted/un-mounted partitions, external storage locations, CD/DVD/Blu-ray discs, network shares, FTP as well as a secured hidden partition on your local drive (Paragon Backup Capsule); Smart Backup options for headache-free security, so you can backup exactly what you need and with the best backup method, chosen automatically depending on the data to protect;
Professional recovery tools;Useful extras: boot corrector, simple partitioning and more. What’s new in 2010 Special Edition comparing to Drive Backup 9.0 Personal? Windows 7 support; Smart Backup Wizard – backup exactly what you need: the whole system, e-mail databases (MS Outlook, Express, Windows Mail) media files or office documents of the My Documents folder, or any other files and folders in a few mouse clicks; Selective Restore to easily extract files and folders from a backup image with the - Restore Wizard without the need to restore the whole image; Schedule File backup – you can start the File Backup Wizard with the preset scheduling option;Backup to FTP; And, other minor improvements.
Last week I upgraded a HPxw4400X workstation from WinXP Pro w/SP3 to Vista Business. I did a full backup and also used FAST (files and settings transfer wizard). However, I soon found out that the DVD drive was "broke". HP told me it was because of the upgrade. They said to do a fresh install. Did another backup, fresh install, then a restore. Had lots of problems with BSOD, but a selective restore got it working again. But he can't see MS Office, nor navigate to it. I can see it when logged in as an admin. I thought of copying files and folders between profiles (he has 3 of 'em - , ., and ..000). The former is the oldest so I thought I could copy the App Data and User Data over it'd work (in both Documents and Settings, and Users), but it didn't work. I've been here working on various issues for 28 hours, so I'm not thinking as clearly as I'd like.
I occasionally (every 3 months) back up my hard drives (I am using three computers, all similarly configured) to an external storage device. I tend to back up the My Documents folders somewhat more frequently (monthly). My two desktops are Vista 64s, and the laptop is a Vista 32-bit. I use the laptop as the master, so to speak, and will occasionally update the My Documents folders of the desktops from this machine.
I sometimes overwrite the same file on the desktops with an older file from the laptop. What I would really like is an easy to use piece of software that updates a file only if it is newer (later time stamp) than what is being updated. This would run much more quickly, and also prevent me from overwriting newer files.
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
