I tried installing the LLTD onto my XP machine but got the message that it was not going to load because the file on my machine was up to date and therefore not nescessary. BUT, I still cannot get the network to work.On the Vista machine I can see the XP machine but clicking on it gets the message that it is inaccessible. The computer name is correct.On the XP machine I see nothing except the local area connection icon. Both machines are in the same workgroup. Some of the network must be working OK because the XP machine and Vista machine both access the internet using the network to get to the Netgear router. Setting up networking on the XP asks you to make a n/w disk for the other machines but - It only allows your to use the Adisk (floppy.
I am running a small network. My workstations are running Vista ultimate and my server running Windows 2003 server. Under XP I had no problems accessing mapped drives but under Vista they become inaccessible after a period of time/inactivity.
This is how it is set up. I have a folder shared on my server called applications. I have it mapped as "P:Applications" on my Vista PC. In "stored user names and passwords" I have an entry \Server with the login details barry@home and the password. This is exactly the same as I had in XP. When I launch Vista the drives auto connect and I can access any of the files. However after a while when I click on a mapped drive icon I get the following error dialog box entitled: "Location is not available" The error message then reads: "P: is not accessible. Logon failure: unknown user name or password." If I reboot Vista the mapped drives work again so it doesn't look like it's a Server 2003 problem and this didn't happen under XP.
One of my computers has suddenly become unaccessible to the network. All connected and working previously - suddenly the XP Desktop says "MSHOME is not available. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions." when I click My Network Places. Then it says (never seen this one before): "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept." Don't know what to make of that. I've recycled power to the router and modem and rebooted. Router config page shows one entry for each machine except desktop 1 shows two entries. Turned off all firewalls and can ping each machine from each machine. Installed Windows updates. What should I do?
i can access to it i'm gotting a mensage it say: your sistem it's been lockecd and the data in the hard disk is currently inaccessible. Your hard disk it's encrypted, therefore you need to enter an administrator password in order to access the data.
The domain that you are trying to access is not valid or it's been disabled by your administrator, pleae contact your sistem administrator for support. Unable to load windows, number of attempts excceded.
I've lost access to the Security Center page. All components, i.e., Firewall, Defender, etc. are still individually accessible and working fine with my Norton 360 v2. However all links to the Security Center page: Welcome Center, Control Panel, and Help & Support no longer work. I've tried the System File checker and System Restore utilities to no avail.Short of reinstalling Windows Vista and its SP1, is there anything else I can try?
This all started when I recently had some malwares/viruses roaming around my laptop one day. I had managed to get rid of it all but it left my Direct Console 2.0 useless (I have an ASUS G-50V, Vista Premium 64-bit). I've tried reinstalling it and it just wouldn't load, no error message or anything (it did show up on taskmanager but no window appeared).
So trying to find a solution on google I ended up installing .net Framework 4.0. However, after restarting i started getting a ton of error messages about files in the Program Files folder, and then I realized it had just completely disappeared (rather, all the files inside disappeared). First the error messages said the folder was "corrupt and unreadable."
I navigated to the folder and tried clicking it, which then another error message popped up saying "Access is denied." I tried almost every solution I found on google, changing ownership and such, but I still cannot open the folder. Moreover, I cannot repair or uninstall any program that is or has been in the Program Files which I'm assuming has to do with the permission issues. I noticed this when I ran the setup for Direct Console 2.0 and tried to repair it, only giving me an error saying "The Installer has insufficient privileges to modify this file: C:Program Files (x86)ASUSOvClk.dll." But this also makes no sense to me as this is the x86 program files folder, which I can access.
I checked both of the folders and TrustedInstaller has ownership to both of them.
*Edit - I just checked the ASUS folder inside my Program Files (x86) where the only group assigned to it for security is "Everyone" and it had no access whatsoever.
I would like to know if there is any possible way to fix this and if the files inside the folder are still there as this is very frustrating to deal with. Most of my ASUS programs were in the Program Files, including the hotkey manager is really useful to me. Thanks a lot.
In case you need to know:
As for the what I did to deal with malwares and viruses I mentioned before, I did install Malwarebytes on another computer with updated definitions and loaded it on a flash drive here, removing whatever malwares it found. Even after this though (and this has been a consistent problem), mbam.exe would disappear after installing Malwarebytes regularly on my own laptop.
Thinking there was some virus or other malware laying around that it didn't pick up, I downloaded and installed AVG. I updated it and full scanned, which found more viruses and did fix the issue of mbam.exe disappearing after install. At this point I installed Malwarebytes again, updated, and scanned again, finding 1 or 2 trojans and I think at this point there shouldn't be any viruses/malwares causing issues, but of course I could be wrong.
I was able to delete MovieMaker, PhotoGallery, Games/etc crap folders which are inaccessible or @least undeletable for normal people. I can delete Windows itself, of course won't ever do that, but theoretically I defeated every shiled that prevents normal people to fully control their "assets". My point is not to brag about it or advertise pointless actions. I am just happy I own this laptop & every bit of harddisk except Bootsector (which I can still penetrate with special binary tools).
Things people think can't be done, can be done if you have brains. Also since I hate WinLiveMail and all Live applications, I forced regular WinMail to work under WIndows7 RC; I am sure when Windows7 comes out I won't be bothering with LiveMail horrendous crapware. WinMail will work here, ideally I want OutlookExpress but... there's a technical problem that prevente dme from forcing it run under Windows7 (too long to explain). Or I might simply start using Outlook which's been idle in my MSOffice2007,except it's too bloated and makes me feel bad about losing good old OE. So folks, you can access and delete things, dont ask me how b/c Microsoft who runs these forums will not appreciate, I just can do whatever.... it's my laptop after all.
I currently have 6 PCs networking with Windows XP in my office. However, one PC is needed to replace. If the new PC bought is with Windows Vista Home Edition, it is possible to be networking to the existing PCs with Windows XP?
This is kind of off-topic and I apologize. I'm having difficulties and some questions regarding networking (Yes, there *is* a Vista machine involved ), but I figure that a network-specific forum might be better suited to my questions. Problem is that I cannot find a suitable place to ask. All the places I used to use seems moribund or gone.
I have bitten the bullet and bought a laptop loaded with Vista Home Premium, 64 bit. I also have a laptop running XP Home, 32 bit. I installed the LLTD Responder protocol on the XP box. I have a domain name of HOME for both computers. Still can't see the either computer on the network.
Everything was (mostly) OK until - I think - the most recent set of MS updates (?last week - all installed OK) on this Vista HP laptop (on all the time, rebooted maybe 1 a week... and not for a couple of days at least...) There have been oddities but last night on returning home from a public wifi location I couldn't connect to the internet... of course nothing had changed on the home network (1Gb LAN - Private -to Thecus N5200 LAN port...(DHCP on) WAN port connected to Netgear Wireless router; laptop wifi - Public - connected to Netgear (DHCP on))
After much fiddling with settings, most of which seem to put everything back as it was (except perh. NAT now OFF on the Netgear - thought the only reason it was ON was because of the only "mostly OK" referred to above as that resolved a previous problem...) everything is OK and I had internet with *both* networks connected...
a) Vista (still) seems unable to recognise that a change of Network (different SSID etc. etc. etc.) should probably require new settings....but it doesn't and connection remains stubbornly Local with the old (home) IP address, gateway, etc.
b) "Diagnose" doesn't achieve anything useful c) ipconfig /renew faills because Vista can't find the DHCP server... (is there a friendlier UI method of telling Vista *just* to get new IP settings without all the tedious and unhelpful "diagnosis"?)
c) ipconfig /all shows adapter STILL has the home IP address... disabling and re-enabling, disconnecting/reconnecting, random *&^%ing around eventualy brings it back to life and eventually a new IP address (and correct gateway and DNS) obtained.....
I just wondering if and how I can hook up two pc's together.(beside's networking) I mean so thay work as one. Why? Becouse I built another pc from all bits & pieces I had lying around and was wondering what to with it.
There are a lot of threads about on various sites about the problems of introducing a Vista PC into a network of XP desktops, but none of them answer my problem. Here it is: I have a network of two XP desktops and one laptop. My old laptop also used XP but this has since been replaced by a new Vista laptop. When I first introduced the laptop all was well and i could access any file on any PC from any other - I don't use passwords. Only one desktop has printers and each of the other PC print remotely via this desktop.
A few weeks ago something changed and now the Vista laptop cannot access any of the files on the two XP desktops. The laptop can see the two desktops and can also see the shared folders on those desktops. However it is not now possible to open the folders or access the files.
Both of the XP desktops can see the Vista laptop and can open folders and access the files on the Vista laptop without problem. The Vista laptop can also print via the XP desktop without any problem. It can therefore access the print spools on that PC. It just can't open the folders to get at the files.
What happened in this case is I installed the printer just like any other network printer, but it doesn't print. I see the job in the queue, it spools, prints and then the queue is blank but nothing comes out of the printer. And there are no errors. I have verified from the XP machine the printer does work. I found another article in Microsoft's TechNet Forums.
It says to add a NEW local printer and use UNC naming to add the printer to the intranet. I have done this before at work with no problem. Vista is suppose to have these drivers built in, but when we tell it to add the printer after filling out the path to the printer \computernameprinter (using the shared name) it asks for the location of the driver. I do not know where to look for this and when I go to HP's www site I can not download the driver as it says it's built into the Vista operating system and doesn't offer it for download.
Where would I point the wizard to for the driver? I looked in the windowssystem32driversen_US folder, but couldn't tell if I was in the right place. I guess I could just keep putting folders in until I found the right one
I have a Desktop running XP - SP3 wired to a Linksys wireless router. My Vista laptop is wireless. I can connect to the Internet fine from either machine. I can see and access the laptop from the desktop but I can't see the desktop XP machine from the Vista laptop. I went through this same thing with my network up north but now that we've moved back to Florida I've got the same problem. McAfee network management shows both machines on the network but I can't access shared files and printers from the laptop.I know there are some settings I need to make to the Vista laptop but I can't remember what I did to get it working up north.
I have two vista computers on my wired Network and neither can see the other but both can see my Xbox360 which is also wired into my network im also having problems sharing folders on one fo the vista computers both computers connect to the internet no problem one connect directly to teh router the other also directly connects however has a second ethernet card and the two connections are bridged to supply internet to my third XP computer which also connects to teh internet no problem
I am trying to network both of my desktop computors with a Linksys router,both are windows vista,my new one is vista premium and the older one is vista basic, I run through all of the installation and setup steps required on both computors and no matter what I do I can only get one of them to access the internet at a time and they can't see each other.
Very new to Vista Home Basic - old XP Home user. This is a new Acer Aspire notebook and out of the box it found my home wireless network and I entered the security key and all was good---to a point. It would drop the connection to the internet but keep connected to the LAN. I red here that antivirus program's firewall must be set to the right setting --- I did that. My question is what do I need to do to keep this system from dropping its internet connection?
We have a Dell Desktop running XP it connects through USB to our 2Wire Gateway router.
We recently purchased a HP Laptop running Vista x64, it is connected to the same 2Wire through the wireless signal.
Here is our problem. We purchased a HP Photosmart C5580 which is connected to our desktop and functioning fine.
We were told we could connect our laptop to this printer wirelessly all though it has no wireless capability (other than bluetooth which we do not have on our laptop). They said there were two ways to network it so that we would not have to use the USB with our laptop.
What is the easiest way to do about doing this?
I have spent 6 hours on the phone with HPs so called "techs" and they were unable to help at all. Kept trying to connect through bluetooth (which I told them our laptop was not capable of). I called Geek Squad to make sure are laptop was some how to connect to this printer with out a USB as that is the only reason I bought it. They said we could do it 2 ways through networking and that it would be simple enough for me to do on my own.
First of all I am not the most technically minded person when it comes to networking so whoever is able to help then please use child talk! All I want to do is get my Vista Home Premium laptop to share my XP desktop - and vice versa. How do I do it? I was easily able to do it on 2 XP machines but I am totally baffled by the XP to Vista set up :
I've recently added an additional computer to my home network and have installed Windows 7 on it so that my network now consists of computers running either XP, Vista or Windows 7. My problem is that although the Vista box appears in the Network entries on both the XP and Windows 7 boxes I can't browse the Vista box. The error message "Windows cannot access \ComputerName" and then indicates that I don't have permission to access the Vista computer. However I'm able to map a network drive on the XP box & the Windows 7 box to any of the shares on the Vista box. The XP boxes can browse the Windows 7 box and vice-versa. The Vista box can browse both the XP box and the Windows 7 box. I've searched for a solution on the web and tried almost all the ones that I've found but can't solve this
What is with the networking and sharing center? I have wireless incomming into my pc and sharing out to LAN. I set the Wireless to private and the LAN to private and the LAN is showing as undentified network and it wont stay Private after a reboot, it keeps changing to public and its preventing remote access across the wireless for some reason.
-set up wireless network: can see all of the shared folders on the XP machine from the Vista laptop, but can only see the Public folder on the Vista laptop from the XP machine. Several other folders, set up for sharing on the Vista laptop, can't be seen on the XP machine ("not accessible- you may not have permission to use this network resource").
- have tried both public and private settings on the Vista laptop- no difference
- Both machines are on the same workgroup
- Firewall is not part of the problem: Windows firewall is turned off on both machines, and problem persists when Kaspersky Internet Security's firewall is disabled
I have two Vista computers running on a home network behind a Linksys router. The problem is that when printing it takes a long time for MS word to print. Computer 1 is a desktop running vista home and computer 2 is a laptop running vista home. The printer is connected to the laptop. I can print from both machines, but it takes a long time to print. Also the laptop is running slow. It takes along time to boot up.
I have an old machine running Win2K and a new laptop running Vista. Both machines are in a workgroup. The Vista machine can see itself, the Win2K machine and the router. owever, the Win2K machine can see only itself. Can someone tell me if Microsoft did this purposely to encourage people to migrate to Vista? Everything seems to be configured properly. If someone can tell me how to check out things thoroughly,
I've recently bought a Vista system and would like to hook it up to my old PC running 98SE. I'm not fussed about the old system having internet access or anything too demanding other than being able to exchange files with the new system. I'm a complete novice to this sort of set up but am usually literate enough to bumble my way through to a solution on most things but one aspect has me slightly confused. From what I can gather the most efficient solution is to use a Ethernet crossover cable to connect the two machines but my new machine has only one Ethernet socket currently occupied by the connection to my router. Am I missing something obvious here or do I need to get hold of a hub or similar?
I am a reasonably experienced Windows networking user (I have been networking Windows PCs together since Win 3.1) and also a network engineer. Vista has thrown an interesting issue up. I have a Juniper SSG 20 router with an ADSL, wifi and Lan interface on it. The way the Juniper works is it forces the wifi connection to be on a different subnet than the wired network. So, I have a wired network of 192.168.1.X and 192.168.2.X for wifi.
If my PCs are on the same subnet (both on wired or both on wifi), no problems. I can share and make network shares available. If my PCs are on the different networks they cannot see each other and network shares fail. I can ping between the PCs when they are on different subnets, so net connectivity is there. I believe that the Juniper is set up correctly (I have set up a bi-directional trust - any any between the two networks). Has Vista introduced a new level of security preventing browsing between subnets?
We have recently installed another computer in the house. I can detect it in 'Network'. If I click on the this new computer icon and login, what features and facilities will be available to me when working on the original computer.
I have a desktop Win XP Sp3) and a notebook (Win Vista x64 Sp1) and an HP C6280 printer working through a router. Both computers will print just fine but after I turn the printer on after being down, the Vista machine lists the the printer as offline and I can't get it to 'refresh' to see that the printer is on. Documents just sit in the queue. Nothing seems to work short of uninstall/install.
I checked out many forums and seen many others with the same or similar problems. I tried all the suggested solutions with no results. I have a home network with 3 XP computers and a Vista laptop (Lenovo x60) running Vista Business. The network using both wired and wireless connections. I installed a NAS (Maxtor Shared Storage 2), and had to change the workgroup name (since the Maxtor could not handle the "@") character.
After I changed the workgroup name on all computer, the vista cannot find my shared printer, neither any of the other computers on my network. The XP machines do not see the vista either. I have internet access from the vista, but cannot print or do backup to the NAS. So far I tried:.................
