Encrypted Hard Disk Inaccessible
Feb 27, 2009
i can access to it i'm gotting a mensage it say: your sistem it's been lockecd and the data in the hard disk is currently inaccessible. Your hard disk it's encrypted, therefore you need to enter an administrator password in order to access the data.
The domain that you are trying to access is not valid or it's been disabled by your administrator, pleae contact your sistem administrator for support. Unable to load windows, number of attempts excceded.
View 6 Replies
ADVERTISEMENT
Dec 28, 2008
I have four (4) hard disks C: D: E: F: all are connected with sata cable and power cable.(of course) The F: is outside from the pc and connected via external SATA and power cable (like usb NOT usb) I know,with USB external hard disk i can use the safely remove option.
Is there any option to safely remove SATA hard disk without Shut Down the pc?
1) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Properties-Policies-UntikDisable the Enable write cashing on the disk??
2) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Disable??
View 7 Replies
View Related
Oct 18, 2007
1. I have a 120GB hard disk that shows a capacity of 105GB. No problems there--I understand that there's a restore partition and GB vs a billion bytes
2. My hard disk says that 54GB is being used.
3. However when I drag and select all folders in my C: and click properties, I only see 28GB of usage. This leaves an unaccounted-for 26GB.
I've just run disk cleanup and cleaned up my shadow copies before verifying all this. Besides at a MAXIMUM, system restore should only eat 15% of my hard disk (18GB). What explains this loss? How do I fight back and regain my hard-earned gigabytes?
View 6 Replies
View Related
Feb 2, 2010
I encrypted lots of my files on my computer, Before it died on me. If I would of known that It was going to die, I would of decrypted asap, but thats not the case. I still have the HD from my old computer(it hasn't been reformatted) I have it installed on my new computer, as a D: drive. Iv tried to move my encrypted folders from my old HD to into my new. but I'm not seeing them pop up, I see the names of the folder when there copied. but when I click on them. nothing. So Iv used a EFS recovery program on my old HD.
Iv got the files but when I decrypted them they came out blurred or gray screened. so that didn't work. I came across a EASEUS data recovery wizard. I was able to recover my encrypted files, but I cant take ownership to decrypted them. error mesg :you will need to provide administrator permission to change these attributes:comes up. I've tried to right click, properties owner tab, advance. I put down myself as full owner for everything but still nothing. Is it impossible to decrypt my files?
View 6 Replies
View Related
Mar 19, 2010
i have a folder on a second drive with some files that i encrypted in Vista Ultimate (no password, just EFS), about a week ago i upgraded to windows 7, a clean install on the primary drive. i went to look at the files and i cant see them on the second drive. is there anyway i can get these files back?
View 8 Replies
View Related
Apr 22, 2008
I had a problem with an older Windows XP Pro machine. I now have a Windows Vista Premier x64 machine. Since the old computer had an ATA drive I couldn't just move the old hard drive to the new SATA system so I have bought an external hard drive kit to connect the old drive to the new system via a USB 2.0 port. My problems is that I can no longer access some encrypted files on the old hard drive.
View 5 Replies
View Related
May 4, 2009
I tried installing the LLTD onto my XP machine but got the message that it was not going to load because the file on my machine was up to date and therefore not nescessary. BUT, I still cannot get the network to work.On the Vista machine I can see the XP machine but clicking on it gets the message that it is inaccessible. The computer name is correct.On the XP machine I see nothing except the local area connection icon. Both machines are in the same workgroup. Some of the network must be working OK because the XP machine and Vista machine both access the internet using the network to get to the Netgear router. Setting up networking on the XP asks you to make a n/w disk for the other machines but - It only allows your to use the Adisk (floppy.
View 4 Replies
View Related
Apr 2, 2007
I am running a small network. My workstations are running Vista ultimate and my server running Windows 2003 server. Under XP I had no problems accessing mapped drives but under Vista they become inaccessible after a period of time/inactivity.
This is how it is set up. I have a folder shared on my server called applications. I have it mapped as "P:Applications" on my Vista PC. In "stored user names and passwords" I have an entry \Server with the login details barry@home and the password. This is exactly the same as I had in XP. When I launch Vista the drives auto connect and I can access any of the files. However after a while when I click on a mapped drive icon I get the following error dialog box entitled: "Location is not available" The error message then reads: "P: is not accessible. Logon failure: unknown user name or password." If I reboot Vista the mapped drives work again so it doesn't look like it's a Server 2003 problem and this didn't happen under XP.
View 9 Replies
View Related
Jan 13, 2010
One of my computers has suddenly become unaccessible to the network. All connected and working previously - suddenly the XP Desktop says "MSHOME is not available. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions." when I click My Network Places. Then it says (never seen this one before): "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept." Don't know what to make of that. I've recycled power to the router and modem and rebooted. Router config page shows one entry for each machine except desktop 1 shows two entries. Turned off all firewalls and can ping each machine from each machine. Installed Windows updates. What should I do?
View 7 Replies
View Related
Jun 27, 2009
I have a desktop pc that is using sata hard disks. I would like to copy an ide hard disk to a larger one using the desktop pc.
View 9 Replies
View Related
May 14, 2009
Hi, new here. I have a sony vaio laptop that has been working perfectly up until a few days ago. I got a blue screen that said unmountable boot volume. I have a vista restore/repair disk but no sony restore disks.I'm not really sure if mine came with any? I used the vista disk and when i try to repair it it says no hard disk found as the error. Is there a way to get my computer to see the hard disk? I've tried using
the command prompt but a lot of things i've tried like chkdsk aren't working or i'm not sure what they mean.
View 9 Replies
View Related
Aug 23, 2009
I have had a problem where, apparently at random, my hard drive starts running and ties up my laptop to the point nothing will run. This lasts anywhere from 5 to 18 minutes. I have not been able to reproduce this on purpose, but yesterday it happened 3 times when I started either Outlook or Foxfire. Today it happened when I tried to sync my PDA. I have tried to turn off any indexing I can find, but no help. It doesn't always happen every day, but will do it several times a week. I am running on a Toshibe Satellite laptop with Vista Home Premium.
View 9 Replies
View Related
Jun 6, 2008
We have 2 identical Dell XPS desktop PCs, both with duo 2.66 processors, 240 GB hard drives, and running Vista Home Premium SP1.For a few years now we've been using a Linksys cable modem which has 4 Ethernet outlets (numbered 1-4) and paired antennas for Wireless-G. My PC was on Ethernet output 1 and my wife's PC was on a Wireless-G adapter. Recently my ISP doubled its speed to 16,000 kbps, but this seemed to have very little effect on my wife's Wireless speed. Rather than hassle with the wireless system, I uninstalled the Wireless-G adapter and ran a new Ethernet cable from output 2 to my wife's PC.The weird thing is that when both PCs are turned on and connected to
the Internet, my PC (Ethernet 1 output) seems to be continuallyaccessing the hard drive. While this is happening, the output 1 and output 2 LED's on the modem are madly flickering, as is the disk access light on the PC. No unusual hard disk activity is going on with the wife's PC. If I shut down either PC, this excessive hard disk activity doesn't take place and the output light (1 or 2) is steady. I've even tried leaving both systems totally inactive for many hours, other than an automatic check for mail every 5 minutes.
Every 1/2 hour or so I'd look in and see that the hard drive activity is still going on and the output lights are flickering. Whatever is going on is happening whether the PCs are active or idle. This has been going on for 3 days now, 16 hours a day, ever since I added the new Ethernet line!
View 9 Replies
View Related
Apr 14, 2008
if there are any good hard disk utilities available that perform more comprehensive testing/correction than those performed by Windows own check disk utility?
View 5 Replies
View Related
May 3, 2008
Purchased a Toshiba laptop with Vista Install....tried to install XP Pro but setup states 'can't see hard drive'.
View 5 Replies
View Related
Sep 5, 2008
i have a sata hard drive running windows vista 32 business. how would i format the hard drive completely and start again? i did a reinstall last weekend but it would not give me the option for format from the DVD, it just gave me a "windows.old" folder which wasn't really what i wanted.
View 4 Replies
View Related
Jul 29, 2009
I am using Vista Home Premium, so I do not have the CompletePC Backup feature, sadly. I just finished reinstalling VISTA and a ton of programs, only to realize stupidly that I am running out of hard disk space because of all the downloading I am doing. It would be pure hell to have to reinstall everything again.
I want to replace my hard drive with one with double the capacity. Can I copy / backup / whatever the entire c drive on to an external drive, then copy the entire contents back on to the new disk drive? Apparently, I have to purchase a product such as Acronis True Image Family.
View 4 Replies
View Related
May 14, 2008
I've lost access to the Security Center page. All components, i.e., Firewall, Defender, etc. are still individually accessible and working fine with my Norton 360 v2. However all links to the Security Center page: Welcome Center, Control Panel, and Help & Support no longer work. I've tried the System File checker and System Restore utilities to no avail.Short of reinstalling Windows Vista and its SP1, is there anything else I can try?
View 6 Replies
View Related
Sep 3, 2009
I've used this forum A LOT to find answers to the many problems I've had with my pc - now I have one that I can't find a solution for, so here I am posting! I'm trying to format a new Seagate Barracuda 1.5TB hdd but it won't go any further than 73%. Computer Management tells me that its still formatting (i.e. NO error message) but its been there for hours. I've tried formatting from the Vista installation cd during boot but it plain refused (I forget the error message), it won't even do a quick format in Computer Management. Is my drive humped?
View 9 Replies
View Related
Feb 8, 2010
I can't afford to lose any of my data (who can?), I'd like to have something on my laptop that monitors the hard drive - and any external USB drives. Free is good but I also want quality. Perhaps some readers have suggestions for software for me? Don't worry, I keep an external hard drive for backup and use it often. But, it wouldn't
hurt if I had something to monitor my drives. The external hard drives crap out to often and leave me without a backup until I replace it.
View 9 Replies
View Related
Mar 23, 2008
Hey again I???m here as a new user of vista and Im going trough a bunch of problems. As for now one day I ran the diskeeper and some how I lost 45 GB of hard disk space for no real reason. After that I ran it again but it didnt help, I don???t know if it has to do with the diskeeper or maybe some other type of problem with the computer applications.
View 9 Replies
View Related
Feb 21, 2010
Recnetly I noticed I had a 4th hard disk drive instead of 3. The strange thing is that I can't remember adding one.. I just got my 2 internal hard disk drives and 1 external hard disk. But now it shows 4. Also, when I try to open this 4th hard disk it gives an acces denied error message. Also, I'm unaible to scan the hard disk. For my other hard disks, when I right click, I got the option to scan for virus. This option isn't in the list when I right click this new station. Here are the menu list by right clicking on the HDD's.
View 9 Replies
View Related
Mar 23, 2008
I want to copy information from my old hard disk but the disk is not visible.
View 9 Replies
View Related
Apr 6, 2009
How do you exactly partition a hard drive or can some one tell me a good place to get a partitioning program or website for a free partitioning program downlaod and what is a good program cause i want to get a good program and not a peice of crud.
View 6 Replies
View Related
Jul 13, 2008
My Vista Ultimate 32bit, with autoplay is a non-removable drive ( D: ). How to solve?
View 5 Replies
View Related
Mar 23, 2008
I've basically screwed up documents and important stuff so i need help reinstalling vista from the dvd, Formatting the hard drive. My M/B is a ga-p35-ds3l and i cant use my keyboard if the shut down is forced it auto chooses.
View 7 Replies
View Related
Apr 7, 2010
For some reason, I cannot see a 1TB hard disk in Vista Explorer. There are no relevant messages in the event logs etc. I can save data to it (via apps, word, excel, downloads etc). I just cannot see it in windows when I go to my computer. Also, can't seem to find anything pertinent on the web, lost about a vista drive not being seen by windows 7 (vice versa), but not what I am looking for. My concern is that if Windows won't display the drive, it may be going bad and it's only 6 months old. Any pointer(s)
View 7 Replies
View Related
Jun 13, 2009
The only way I am able to boot his with a political CD/DVD in the drive, wait for the "press any key to boot from CD or DVD" prompt comes up, do not hit any key whatsoever and then the normal user prompt/enter password screen comes up. Additionally if I try to "Safe Mode Boot" I Blue Screen.
View 5 Replies
View Related
Jan 12, 2010
Recently often the following messages appear when start up is attempted:
- No boothable device
- Hard disk not exist
- Insert boot disk & press any key
I can only start up the computer after pressing ctrl, alt, delete sometimes this needs to be done twice and then the computer starts normally
View 4 Replies
View Related
Jan 5, 2010
Am reinstalling Windows Vista after a virus infected my PC. I am reinstalling vista but after booting from DVD Vista does not recognise my SATA hard disk on the "Where do you want to install Windows?" screen. There are no issues with the hard disk and this happened once before but I can't remember how I solved this. My problem is the Vista installer not recognising my hard disk so I can install Vista. I have an Alienware pc with hitachi deskstar hard disk and asus a8n-sli deluxe motherboard. I have to reinstall as a virus has caused my windows explorer to malfunction and it also installed a trojan which stole my key. I have tried a couple of ASUS raid drivers via a usb hard disk with no luck. We can't find any appropriate hitachi drivers. I think this is related to the hard disk controller?
View 4 Replies
View Related
May 25, 2008
My system was working fine the other day, but while copying a file by nero?.the system hanged and I had to restart it. But I got a disk boot failure error. Then , I tried to run a windows xp installation CD, but that is also showing some error message during installation and the installation fails. I did check the bios settings and the disk fails to show?and had it checked on another system also? but bios cannot detect the hard disk.
View 4 Replies
View Related
