First of all I am not the most technically minded person when it comes to networking so whoever is able to help then please use child talk! All I want to do is get my Vista Home Premium laptop to share my XP desktop - and vice versa. How do I do it? I was easily able to do it on 2 XP machines but I am totally baffled by the XP to Vista set up :
View 4 RepliesTrying to network a Vista laptop with an xp desktop. Want to share files and printer on the xp machine. I have downloaded and installed LLTD as suggested by others. Still unable to see the xp machine on the Vista map. Vista is running Norton 360 and the XP is running Norton Antivirus, latest version
I would like to transfer some files from my old XP laptop to my new Vista laptop. All available Windows updates have been applied to both boxes and both boxes are plugged into my Linksys BEFSX41 router. I must boot my XP box in "Safe Mode with Networking" because some unknown startup item has been causing problems. For both boxes, my logon account is a member of the local Administrators group and has a blank password. On my XP box, in Explorer I share the folder "xfer" which contains my files. I grant "Full Control" to "Everyone".
On my Vista box, in Explorer I can see my XP box, but when I double-click on it I get the message:"is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Logon failure: user account restrictions. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced."
I have a desktop running Vista ultimate32 with 2 Gigabit LAN ports. One is on the PCI bus and I have that one connected to my 4-LAN port wireless router as the router is a T-100 piece of gear, and my high-speed internet connection is nowhere near that speed. I also have a laptop runnings Vista Ultimate x64 that I normally use wirelessly and have sucsessfully set up a local network on it for sharing files and media via Windows Media Sharing. I want though to be able to connect the laptop directly to the desktops second gigabit port (the PCI-E one) via CAT-5 cable because large files take forever to transfer to the laptop when i connect either via Wireless-g or plug it directly in to the router. How do I set up the desktop to both share the incoming internet connection and allow me to transfer files directly to the laptop.
View 4 Replies View RelatedI cannot get my 64 bit vista machine to connect to a printer connected to my 32 bit XP machine. I have read all kinds of advice on various forums and the microsoft support site but nothing seems to work. Both computers have been networked for some time, I am able to share files and folders, both computers see the other in their network folder. I have pinged the printer, the other computer back and forth and everything is OK. I can see the network printer connected to the host computer but when I try to connect, I get the message that the server does not have the correct driver(s) installed. The printer prints fine from the XP machine.
When I tried to install the drivers on the Vista machine I was told by HP that they do not have a full version of the drivers for my 64 bit macnhine but could only provide basic drivers which I downloaded and installed. I have tried creating a new port with the host computer name and printer name but all I get is the network path cannot be found. I have followed some of the suggestions for similiar problems on this site where people have had success but those ideas just don't work. The printer is a HP Photosmart 7960 which I have had for several years. Right now I am at my wits end and ready to go back and start over, maybe I missed something minor.
When you turn on file and printer sharing, both file and printer sharing are turned on. Is there a way to turn on printer sharing only? by default, c$ is always shared on windows XP pro, I am not sure about vista/windows 7 home premium. So there is some security risk with file sharing, while there is less risk with printer sharing.
The PCs are behind the firewall, however, there is a possibility that the PC used by the kids have trojan or are even hijacked (anti-virus are installed but it's still not that secure). So I only want to share the printer.
My client is having difficulties sharing files between two computers. The server PC is running Vista Ultimate SP1 and the client is running Vista Business SP1. Access to files in a subfolder under the built-in Users share seem normal. However, when I setup a new folder directly off the C: drive and shared it, files and folders are not reliably accessible from another PC.
Eventually, I want to restrict the new share to specific users, but initially, I set it up where the Everyone group is a co-owner. After the client computer starts up, it can access all files in the new share normally. However, after about 30 minutes of use, file access slows down. There is a delay of a few minutes sometimes before the close, delete or modify task finishes. Sometimes, the client PC hangs indefinitely and must be shut down.
I currently have 6 PCs networking with Windows XP in my office. However, one PC is needed to replace. If the new PC bought is with Windows Vista Home Edition, it is possible to be networking to the existing PCs with Windows XP?
View 9 Replies View RelatedThis is kind of off-topic and I apologize. I'm having difficulties and
some questions regarding networking (Yes, there *is* a Vista machine
involved ), but I figure that a network-specific forum might be
better suited to my questions. Problem is that I cannot find a
suitable place to ask. All the places I used to use seems moribund or
gone.
I have bitten the bullet and bought a laptop loaded with Vista Home Premium, 64 bit. I also have a laptop running XP Home, 32 bit. I installed the LLTD Responder protocol on the XP box. I have a domain name of HOME for both computers. Still can't see the either computer on the network.
View 4 Replies View RelatedI have a small network with 4 pcs. 1 is Vista 64, two XP Pro and 1 W2K. Peer
to Peer. All machines could see the other machines shares without problem.
The net browser is the W2K machine.
I had to change the chassis of 1 XP Pro box because of heating. everything
was phisically moved to another chassis, no OS change watsoever, nor
component changes. Now, both XPs and the W2K can see shares in each other
normally, as before, and they even can see shares on the Vista box.
But the Vista started behaving in a wierd manner:
Vista to W2K: sees shares normally
Vista to WXP Pro not modified Sees shares normally
Vista to WXP Pro with new chassis: The XP does not recognize the vista User
and Password. I tried as Administrator, as user, changed passwords in both
XP and Vista, created a New user in both machines with and without password,
and still the XP refuses to recognize the Vista credentials.
can someone tell me if these 2 share drivers?? what about win2008/server? are they all on vista cores?
View 9 Replies View RelatedI just bought a gatway laptop with vista and also have another laptop with xp. I have a network set up. Both laptops can get on that network wirelessly and can get on the internet with both. Now the PROBLEM, my xp laptop (wireless) sees the vista laptop (wireless) but the vista laptop doesn't see the xp laptop.
I have made the vistat laptop private and turned on all sharing. I also tried to double click the vista laptop icon(on the xp laptop) but got the error message (not authorized...). What steps do I need to take to get the two computers sharing?
How do i disable default share?
View 6 Replies View RelatedWe have vista on both desktop (office-pc) and wireless laptop (daniel-pc) and a canon mp830 connected to the desktop pc. Desktop has macafee with firewall off and laptop had pc-cillin with firewall off. Both machines have identical sharing & discovery settings (no passwords), and the printer is shared. Both pc's see the other's files and printer. I plugged the MP830 into the laptop and let vista install the drivers.
When the printer is connected to the desktop pc, and I try to connect from the laptop, I get the 0x00000012 error. I then followed the advice in this forum and tried to create a local port on the laptop printer as \office-pcCanon830 and I get 'access denied'. Now, here's the thing, I plugged the printer into the laptop and tried to connect to it from the desktop. I clicked START, NETWORK, Daniel-pc and then right clicked the printer and clicked connect and IT DID. I then printed a document from the desktop to the printer connected to the laptop.
Next i uninstalled the printer from the desktop and then plugged it back in and let vista install the drivers as I had the laptop, thinking that perhaps there was a snag in the Canon software. I also downloaded the vista driver from Canon as I had done for the laptop. But when I tried to connect the desktop printer from the laptop, I once again got the 0X00000012 error. I've been round and round with this for a week and i must be missing some little thing.
I have a notebook computer and my wife has a desktop. We both use Vista.. How can we share our outlook information so calendar appointments and contacts show up on both of our calendars?
View 7 Replies View RelatedMy home TV service (AT&T U-Verse) allows for the playing of songs from a networked PC, over the TV and thus over the TV's sound surround speakers. For this to work, I need to allow all of my music folders/files to be shared. My music collection is housed in Itunes, which creates a folder for each artist, and sub folders for each album. I have about 4,000 songs, and 385 artists. "Beneath" these 385 folders for the artists, there is approximately another 700-800 sub folders. All of these folders/files are "not shared". How can I change all of the folders & files to "shared" WITHOUT having to do each one individually?
View 6 Replies View RelatedI am having issues sharing files located on the C drive of my host computer. Both computers are running Vista Ultimate SP1. I have set up the sharing, but I get access denied when I attempt to access the files. what I need to change to fix this?
View 5 Replies View RelatedMy Vista Laptop. I enabled Guest, although I heard it is better not to do that. I have a administrative account named "Owner". And I added a user name called "Brandon T". On this last one I assigned a password. Network is set to "private". Password protected sharing is set to "off" to avoid any hassles. Public folder sharing is set to off because I want to share specific files. For the specific folder "music", sharing says "Brandon T" and "Owner". "Brandon T" is "reading" but that's ok because I only want to copy for back up purposes onto my desktop. I have McAfee protection but I disabled firewalls on both sides of the equation.
My XP Desktop. One user account "Brandon T" with same password as laptop. Workgroup is set to same as laptop, "MSHOME". I have NOT downloaded the LLTP .... thing ... because I read it wasn't necessary to share. My Desktop CAN SEE the "music" file, but ... and you know what's coming ... " is not accessible. you might not have permission to use this network resource. Contact the administrator of this server to find out if you have access pemissions."
I've just bought myself a new pc n have it hooked up to the internet ready to go.... my old pc I have given to my sister and the pc is in her room seperate to mine. Is there any way we can share the same internet connection if so what do i need n is it easy to do?
View 4 Replies View RelatedScenario: 4 PC's. All in the same domain.pc #1, Windows XP Pro pc #2, Windows NT 4.0 domain controller pc #3 Windows Vista 64 ultimate pc #4 windows Vista 32 ultimate Now up until about a week ago every single device could access each others shares no problems. No changes on any pc has been done. Windows Firewall has been turned off as well as defender where appropiate. The problem i have now is that pc#4 is now started having issues with accessing a share on pc#3. Continually getting prompted for username and password. I have even tried an domain admin account which fails. Pc#1 and pc#2 have no issues and are not prompted with username / password related promtps to access this share. Pc#3 can access shares on pc#1, #2 and #4.
View 4 Replies View RelatedI've got all the options set up the same as my bro's pc, windows media player sharing service enabled, firewall set up the same. But my pc will just not share my media with his pc or ps3. I am able to "see" his media library and the ps3 can too, but my bro's pc will detect my pc, but not be able to "see" my media library. The ps3 will just not be able to pick mine up at all and vice versa. My network folder doesnt display the media folder for my pc.
View 4 Replies View Relatedi have a pc with ADSL wit win Vista x64 with a blutooth device ! and i have a laptop with win vista x64 ! i want to share my adsl with bluetooth ! beetwin pc and laptop !
View 4 Replies View RelatedMicrosoft SharedView is a free utility that allows you to share your desktop, applications and documents with up to 15 people online at a time. It is perfect to hold a small meeting or to show a family member how to do something. Best of all it works well through firewalls and routers so you don’t have to worry about connection issues.
Getting Microsoft SharedView up and running requires a Microsoft Live ID, broadband connection and a short download....
Everything was (mostly) OK until - I think - the most recent set of MS updates (?last week - all installed OK) on this Vista HP laptop (on all the time, rebooted maybe 1 a week... and not for a couple of days at least...) There have been oddities but last night on returning home from a public wifi location I couldn't connect to the internet... of course nothing had changed on the home network (1Gb LAN - Private -to Thecus N5200 LAN port...(DHCP on) WAN port connected to Netgear Wireless router; laptop wifi - Public - connected to Netgear (DHCP on))
After much fiddling with settings, most of which seem to put everything back as it was (except perh. NAT now OFF on the Netgear - thought the only reason it was ON was because of the only "mostly OK" referred to above as that resolved a previous problem...) everything is OK and I had internet with *both* networks connected...
a) Vista (still) seems unable to recognise that a change of Network (different SSID etc. etc. etc.) should probably require new settings....but it doesn't and connection remains stubbornly Local with the old (home) IP address, gateway, etc.
b) "Diagnose" doesn't achieve anything useful
c) ipconfig /renew faills because Vista can't find the DHCP server... (is there a friendlier UI method of telling Vista *just* to get new IP settings without all the tedious and unhelpful "diagnosis"?)
c) ipconfig /all shows adapter STILL has the home IP address... disabling and re-enabling, disconnecting/reconnecting, random *&^%ing around eventualy brings it back to life and eventually a new IP address (and correct gateway and DNS) obtained.....
I just wondering if and how I can hook up two pc's together.(beside's networking) I mean so thay work as one. Why? Becouse I built another pc from all bits & pieces I had lying around and was wondering what to with it.
View 5 Replies View RelatedThere are a lot of threads about on various sites about the problems of introducing a Vista PC into a network of XP desktops, but none of them answer my problem. Here it is: I have a network of two XP desktops and one laptop. My old laptop also used XP but this has since been replaced by a new Vista laptop. When I first introduced the laptop all was well and i could access any file on any PC from any other - I don't use passwords. Only one desktop has printers and each of the other PC print remotely via this desktop.
A few weeks ago something changed and now the Vista laptop cannot access any of the files on the two XP desktops. The laptop can see the two desktops and can also see the shared folders on those desktops. However it is not now possible to open the folders or access the files.
Both of the XP desktops can see the Vista laptop and can open folders and access the files on the Vista laptop without problem. The Vista laptop can also print via the XP desktop without any problem. It can therefore access the print spools on that PC. It just can't open the folders to get at the files.
What happened in this case is I installed the printer just like any other network printer, but it doesn't print. I see the job in the queue, it spools, prints and then the queue is blank but nothing comes out of the printer. And there are no errors. I have verified from the XP machine the printer does work. I found another article in Microsoft's TechNet Forums.
It says to add a NEW local printer and use UNC naming to add the printer to the intranet. I have done this before at work with no problem. Vista is suppose to have these drivers built in, but when we tell it to add the printer after filling out the path to the printer \computernameprinter (using the shared name) it asks for the location of the driver. I do not know where to look for this and when I go to HP's www site I can not download the driver as it says it's built into the Vista operating system and doesn't offer it for download.
Where would I point the wizard to for the driver? I looked in the windowssystem32driversen_US folder, but couldn't tell if I was in the right place. I guess I could just keep putting folders in until I found the right one
I have a Desktop running XP - SP3 wired to a Linksys wireless router. My Vista laptop is wireless. I can connect to the Internet fine from either machine. I can see and access the laptop from the desktop but I can't see the desktop XP machine from the Vista laptop. I went through this same thing with my network up north but now that we've moved back to Florida I've got the same problem. McAfee network management shows both machines on the network but I can't access shared files and printers from the laptop.I know there are some settings I need to make to the Vista laptop but I can't remember what I did to get it working up north.
View 6 Replies View RelatedI have two vista computers on my wired Network and neither can see the other but both can see my Xbox360 which is also wired into my network im also having problems sharing folders on one fo the vista computers both computers connect to the internet no problem one connect directly to teh router the other also directly connects however has a second ethernet card and the two connections are bridged to supply internet to my third XP computer which also connects to teh internet no problem
View 8 Replies View RelatedI am trying to network both of my desktop computors with a Linksys router,both are windows vista,my new one is vista premium and the older one is vista basic, I run through all of the installation and setup steps required on both computors and no matter what I do I can only get one of them to access the internet at a time and they can't see each other.
View 5 Replies View Related