I am running into a problem with my sound when playing games. For some reason my sound stops working completely after starting a game. It happens in games like COD4, L4D, TF2, and so on. Even when I close the game, I get no sound on anything. It is as if the audio service stops completely. I am using Vista Ultimate x64 on a Intel i5 750 with a Radeon 4890 XXX 1 gig card. My audio card is an onboard Realtek HD. My mobo is an Intel DP55WB. I only notice it when I play games, and the timing varies. Last night I played L4D for 10 minutes before it happened, and today it happened 10 seconds into COD4. It feels as if it is an intermittent conflict between something. I tried reinstalling new drivers, but it doesn't work. Does anyone know what to look for in a case like this?
review the attached, I don't even play games or lots of video/audio stuff. I have a laptop that sits on a briefcase with the fan slot exposed. SpeedFan - Access temperature sensor in your computer
recently tried to install vista 32bit on my computer, it was successfull until i installed nvidia display drivers. The error i got was: Error: Display driver has stopped working and has recovered successfully. I even tried to get Omega drivers, and old archived nvidia drivers did not work. So i gave up, and asked my retailer if i could get the x64bit instead. they aggreed with that. So i installed that one also correctly. No problems with the GPU drivers there, however in games my computer kept restarting after playing ~20mins and two days later my Powersupply died. a 600W PSU from OCZ. I then removed vista from my computer and is now running xp x64 and i have no problems what so ever. But i want Vista! loved the functions. I want to try again soon, but im not sure if my computer will survive.
We have a vista PC that is regestered in DNS as a KMS server (nslookup -q=SRV _VLMCS._TCP shows this PC) How can we have the person who is running this PC kill the KMS service so we can create a valid KMS on a Server 2003 or 2008 box?
Managed to kill my raid 0, 1 terabyte games drive today. Absolutely shattered. Maybe ten hours worth of installs on that drive. To say that I am upset is an understatement. You live and learn. Will be purchasing an extra backup drive exclusively for backing up this drive. Never will I feel this pain again
I'm using Windows mail on Vista enterprise 32 bit. I can see there's a few posters in this group I've no interest in reading (I couldn't care less about some posters opinions of Windows contra Linux, I use both happily) and I'd like to skip over them. What's the best way to set up a kill file in Windows mail?
In a very surprising move, Microsoft has announced today that Windows Live OneCare customers will be getting the shaft next year. The software giant has decided to replace OneCare with a free security solution (codenamed "Morro") to be released in the second half of next year. The yet-to-be-announced product will be a realtime anti-malware protection solution, whereas OneCare offered that plus backup and management features. Sales of the Windows Live OneCare subscription service as well as Windows Live OneCare for Server on SBS 2008 will end on June 30, 2009.
If your subscription is about to run out, I'd suggest looking for an alternative instead of renewing a product that is on its way out the door. Sure, OneCare will continue to be available online until Morro is available and your subscription will still work until it ends, but Microsoft's decision makes the company look unreliable. Full Story: Microsoft to kill off Windows Live OneCare next year (Updated)
The new Windows Security Center in Windows Vista can be just as annoying as the security centers in previous versions of Windows. I am an advanced of a computer user to know that I do not have anti-virus software installed. I don't need the Windows Security Center to remind me that all the time.
Thankfully there is a new easy way to disable the security center messages.
Click on the Security Center/Windows Security Alerts logo in the system tray.
Click Change the way Security Center alerts me.
Select I do not want notification messages from Security Center.
I'm sure you are familiar with the traditional way to kill or end a process in Windows using Task Manager. This method is effective but not nearly as fun as killing a process in Command Prompt. Additionally, killing processes in Command Prompt provides much more control and the ability to end multiple processes at once....
whenever I put the computer to sleep mode and move the mouse while it's getting into sleep mode, it'll either restart or kill the computer. When it kills the computer, the fans still run but the lights on the front go out. There is also no picture on the monitor. To turn off the computer, I have to force a shutdown by holding the power button for around 4 seconds. Then, when I try to turn on the computer again, the fans turn on, the hard drive runs, but still no lights on the front of the case nor picutre on the screen. I fixed it by clearing the RTC RAM on the motherboard. After doing that, the computer would boot up, but if I did sleep mode and moved the mouse, then the computer would die again, and I'd have to clear the RTC RAM again. I'm wondering why this happens with sleep mode. I use Vista Home Premium 64-bit. Is there a solution to this problem or does anyone else have this problem?
I've never seen a discussion group like this one? I know threads break down and take a turn but I've never seen so many people in my kill file in such a short time. Hardly any help is offered here just a bunch of people saying this and that about each other, or defending Ubuntu in a windows group?
just got some games loaded and I used to have ATITray Tools which would let you keep the frame rate and temps in the corner during game play, anything like that for Nvidia? Just ran Quake4 at full specs and had Nvidia performance control panel turn the fan to 90%... but would like to monitor the temps and frame rates on this and other games. 9800GT 1GB. ( as soon as the new card arrives.... back to ATI tools.
Im trying to help a friend fix their sound on their HP Compaq Presario F500 (2EA)Laptop. They have the annoying red cross over the audio icon on the bottom right hand corner of the screen (No Volume Mixer).
I have tried numerous things like:-
- Completely uninstalled the (Conexant High Definition) drivers in device manager, restarted and let Vista install them again. - Downloaded latest drivers from RealTek,, and also HP - Unfortunately their are no system restore points before the problem happened.
I have a sneaking suspision that either Windows Update installed something that is clashing with this problem or I herd that Itunes may have somethign to do with it (Which was installed near the time).
TaskManager refuses to "kill" or close MozillaFF (and other locked up programs). How can it get TM to work and kill this Browser and other locked up programs? Is there a free program out there to close programs TM cannot?
I have a Gateway MX6445 i bought it back in 2006 i recently updated from xp to vista ultimate x64 when i updated it everything was ok except audio. The audio tab has a big red x above it, and when i go to the control panel it says no audio output device is installed. I have tried unistalling and rebooting and that doesnt work because it searches for the audio drives and then ask for a disk, well i dont have a disk and then it tells me it could not find the drive and to contact the manufacturer
Prior to installing Vista, Windows XP had drivers for my Conexant Sound Card but 3 days ago I installed Vista Ultimate and I can't seem to find drivers for my sound card, I used Everest Ultimate and it shows my Sound Card as Riptide Audio Device, the problem is that currently I'm making my speakers work on the onboard audio, But the output is too low since the speakers lack amplifiers. Tell me if my Sound Card Diver in XP would be compatible in Vista! PS: I've tried Windows Update and It says that it couldn't find the drivers for my Sound Card.
Running a Toshiba Satellite (nice speakers) under Vista Home Premium SP2. There is a series of audio interviews on the web that I want to record on my HD. Currently, I'm having acceptable results simply playing through the speakers and picking it up through the microphone using Sound Recorder. It's not exactly high fidelity, but I'm dealing with speech, not music. The only problem is that it's vulnerable to any noise in the area, and four to six grandkids can produce that effortlessly.
I asked Geek Squad if I could just jumper the earphones output to the mic input, thereby blocking out external noise. She said it wouldn't work because ... yadda yadda .. powered mic ... yadda yadda ... a lot of extra noise. She confused me further with talk about software that will do this. I tried a free trial of one, but it looked as though it was still depending about the output from speakers and said nothing about gagging grandkids. Is there a way to play audio from a website and record it on my HD without depending on immediate airspace?
If I run the default Vista audio drivers the output volume on my external speakers is very low (i would guess 10% of maximum) with all volume controls set to maximum. Double and Triple Checked - but no change. I have read here an in other forums to try updating to the new Realtek Audio drivers. I have done so, but when I do all of the volume comes from the internal speaker only on the tower. No audio coming out of external speakers. The Realtek Audio Manager in the system tray show a red (ish) speaker.
I used to connect my HP Pavilion dv9260nr Notebook to my Sharp Aquos LCD tv through an HDMI cable and got audio and video w/ no problems. About 2 months ago I reinstalled Vista Ultimate x64. I haven't tried to reconnect until recently and now I get video but no audio.
I have tried to set SPDIF Interface to default like I used to but it doesn't work. You can see the green "mixer" bar moving, but I can't hear anything. Also, when it's set to default the configure box is greyed out.
I have the latest Conexant High Definition Audio Driver, 4.33.1.61. I also have Vista Codec pack v511 installed.
Seems like I need to "enable" hdmi somewhere but I can't find anywhere to.
I have a dell lalptop with windows vista basic. I have used the sound recorder before but the quality is not that great (using the inbuilt mic). So today I brought a microphone headset (cheap one). But I still find a little bit of background noise using the sound recorder. I need this because I do poetry and I am doing some recorded peotry for use as backing for a dvd. Im just looking for the cheapest resonable option. Has anyone got any ideas? I have done a couple of peoms to dvd but the sound lets it down. This is just a project at the moment so I dont wont to spend louds of money on equipment.
I've just got a new laptop which has Vista Basic on. Everything seemed fine until I tried playing MPEG 2 videos: the video itself looked fine but there was no audio. I've spent hours on this now and I still can't find an answer to my problem. I'm getting desperate now:
Is there a way to rip just the audio from DVDs? I have a few live concerts on DVDs, and I would just like to listen to the audio of them all on my MP3 player. Transferring the whole contents of the DVDs would take up way too much storage on my MP3 player. Can Windows Media Player do this?
For those who are using Vista x64 flavor with the SRS Audio Sandbox topping!
Many complains i have seen on the net about sound crashing when using this combo.
I also have the same problem with SRS. I came up with the why....? but not the how to fix it. I have an MSI sli v2, with the HD realtek alc888, 7.1 capable audio connector. I used to have installed windows xp x86, in this system and used SRS 32bit version and it worked great, never had a crash. Now I re installed my system with the lattest trend that is ....Windows Vista Ultimate x64....i had to get myself the x64 version of SRS. I installed it and ran it, and now the problems start. It sounds great untill it crashes. (I did install the 32 bit vesrsion of SRS in Vista Ultimate x86 for a friend and he doesn't suffer from crashes) So my deduction here is that the problem lies in the x64 drivers of SRS or the capacity for vista x64 to handdle such a fine program. (i have not tryed the x64 version of xp yet to single out if it is the xp/vista or is the 32/64 conflicts with SRS)
So if any one wants to join this discussion, to see if we can come up to the solution....i tell you there will be many happy ears out there! I am one of the addicts to SRS the sound, its so rich! i can't just listen to the plain sound of the realtek eq.
I posted this question a while ago, but didnt get any response. here it is again ( I am kinda desperate now), before I take my copmuter to service, Id like to know if someone had a similar problem. Or a solution. Recently I installed Logitech caemra on my computer.After connecting it I lost audio. No sound in my speakers, not even in headphones. I uninstalled my camera, but it didnt help at all, there is no way I could get the sound back. There didn't seem to be any error with an installation. I dont think my audio driver was corrupted. Is it just a coincidence or did installation caused this problem. How can I get my sound back?
On a fairly regular basis I get choppy audio. This happens both when doing streaming video or playing a musci file directly from my desktop hard drive. Other times I can play an entire movie without any problem. Once the problem happens the only way to fix it is to do a reboot which is really annoying especially if the problem occurs half way thru a playback. I have windows vista home premium, 4GB ram and a ton of hard drive memory as well as a video card with 256k of ram and DSL broadbanc internet . I should have enough capability for this not to happen. Is there anyway to diagnose if this is a software proble or hardware issue? Also, how would I go about checking to see if any of the hardware devices need to up updated?
After installing SP2 I noticed that Windows had replaced my Realtek HD Audio driver with its own older version. It also now appears twice in the Device Manager; I can remove one of them with no ill effects but it is redetected at next boot and reinstalled. So I removed both of them, installed the latest Realtek driver and rebooted. Now I still have two instances - one (called Realtek High Definition Audio) with the Realtek driver and the other (simply called High Definition Audio Device) with the Microsoft drivers. If I force the Microsoft one to use the Realtek drivers it crashes horribly with a BSoD (so I won't be doing that again!).
Once again I can remove the Microsoft one with no ill effects but it's redetected and installed again on the next boot.Something in my memory tells me I always had two entries under 'Sound, Video and game controllers' but the second one wasn't called "High Definition Audio Device" and the Driver Provider was Realtek, not Microsoft. Trouble is, I can't remember what it was called, or what it was for. I could always do a System Restore to pre-SP2 and find out that way but it's probably worth finding out here first whether I'm worrying about nothing or not. It seems I've got two components of the same chip with drivers from different releases.
I recently bought a new PC with Windows Vista on. It supports HD audio, and came with Realtek HD Audio Drivers. I do however only have 2 "normal" speakers -- no surround equipment or anything like that at all. And I think the audio sounds weird now, compared with my old PC, which did not have this "HD Audio" thing. Is there any way to go back to plain old audio? Maybe it can be done in the Realtek HD Audio confguration in the Control Panel?
