I just built a new system hooked everything up and tried to run windows disk when it get to checking system configuration it sits there and then goes black what could be causing this? system specs pc chips m811 board anthlon xp 2400 512mb kingston pc2100 ram asus v9400nvidia geforce mx 4000 64mb samsung 40g hd godegen case 350w codegen power supply.
View 14 RepliesWhen I want to install Windows XP from cd it says "Checking hardware configuration" and then it goes blank. Computer keeps on running, just nothing on the screen. No versions work, with/without sp1/sp2. I tried upgrading, tried bootdisks, nothing helped. I reflashed bios, doesn't help. And the weird this is it is only on Windows XP, Win2K pro installs just fine and so does Gentoo and Slackware.I believe the problems started to occur when I put in 2 new disks, 2x200gb Maxtor Diamond Max 10 (S-ata). I don't think they are the problem.
View 1 Replies View RelatedIn the last couple of weeksI have been getting the following message:
"Please wait while checking system configuration" - in a pale blue box at startup. It sits on the top of all programs and will not turn off, even after a couple of hours, The rest of the operations work ok.
I have read an old thread on this in the forum, but it was never answered to my satisfaction, so I am asking again.
I'm working on someone's laptop. It has a error when turned on stating a disk error occured. press ctrl alt del to restart but of course when you press those keys it keeps giving you the same message. So I decided to reload windows but when I boot it up with the recovery disk, it states "setup is checking system hardware configurations" but after that the screen goes blank. Any idea how to solve this in order for me to reload windows?
View 2 Replies View RelatedI have a used copy of XP upgrade and would like to know if it is being used before installing it. Is there a MS site one can go to and put in product key to see if it is already in use?
View 2 Replies View RelatedI just wanted to know if there is anyway I can find out how long a computer has been on for in total. I tried the systeminfo comand in CMD and that dosnt work. What I really need is the entire time kinda like the KM on a car, so I just wanted to know if there is anyway to find that out.
View 2 Replies View RelatedHow can I tell what version of DirectX I have installed please?
View 3 Replies View RelatedI am buying a new business computer to use SAGE and Photoshop CS4. The man in PC World said he didn't think SAGE would work with Windows 7 so recommended i buy a HP with XP built in for 580 with 22" monitor. The alternative is Acer Aspire x1301 and get a graphics card for it... Which should i go for to avoid problems with my programs working??
View 14 Replies View Relatedhow do i check to see if i have all the correct drivers for an hp a1640n dual core processpr with viiv
View 1 Replies View RelatedWindows Update doesn't download from MS anymore. When I try to manually update my comp opens a new browser, goes to Micorsoft Windows Update. In the browser it sez:"Checking for the latest version of the Windows Update software...Depending on your connection speed, this might take a minute. During this time, you may receive one or more security warnings. Review each security warning to ensure that the content is signed by Microsoft, and then click Install or Yes to install the software."But nothing happens. On the left side of the window, the Install Updates, View Installation History, & Restore Hidden updates is greyed out.
View 3 Replies View RelatedIts been a while since I came here, alas, I have not had any major problems on any of my machines due to all the great information I have obtained on this site. however, I just put together a brand new PC, probably my best and most powerful to date, and I do not want anything to screw it up. Here is my configuration. There is nothing on it right now, its brand new only has a few mp3's. Should I install Service Pack 2? I think its good, but I would like some expert advice. Lastly, should I install it through live update or through the Microsoft site, or as someone suggested, install the Network Installation pack for Developers and IT professionals.
View 10 Replies View RelatedDuring my network troubleshooting, I was checking my NIC configuration on my desktop to make sure that file and print sharing was enabled and realized that there is nothing installed, no clients, services, or protocols. When I try to install I got an error message that the file could not be found.This is strange because I get access to the internet.Is this possible?Could this be the reason my laptop cannot access the desktop? How I fix this?
View 14 Replies View RelatedI noticed lately that my computer has been running very slow and decided to snoop around in the services tab in the System Configuration Utility and MAN!! I have about 50 different programs running. I want to know what I can and cannot uncheck so my computer won't stop running altogether. I'm running XP Pro and a wireless network to 2 other computers in the house
View 4 Replies View RelatedSystem Configuration Utility, Startup, dumprep 0 -k %systemroot%system32dumprep
View 9 Replies View RelatedIn my "services" tab in my "system configuration utility" accessed via 'msconfig', I count about 75 entries all of them checked. Now, I know there a some of them that I need. example: "AVG Update Service". But there are many most, in fact that I haven't a clue about what they do or if I really need them. For example: "Cryptographic Services". What in hell is that? What I'd like to do is disable all the stuff that I don't really need, so that I'm not wasting resources. Thanks for any help anybody can give. If you really come through, another donation will be on the way
View 4 Replies View RelatedSpybot Search and Destroy had finished scanning my computer (Dell Dimension e520 running Windows XP service pack 2). I then clicked on it to fix the problems it found, and started doing something else on Tradestation. A short time later, a message popped up on my screen that I had never seen before. It basically said there was a system fault, that my computer was going to reboot in 60 seconds, and that I should save all my work. The only thing I remember about the message was that it said something about "NT" system fault or error fault or something like that and a timer counted down from 60 seconds. There was no way for me to cancel it. A separate message from Spybot also popped up. I don't recall what it said other than it asking me if I wanted it to start automatically before everything loaded up the next time I started my computer because of something it had found or that had occurred. But I wasn't able to click OK before the time ran out because I was too busy trying to figure out why I was getting these messages and save my work at the same time.
My computer then rebooted. However, while Windows was loading, it stopped and gave an error message stating that a particular file (hal.dll) was missing or corrupt. On my computer I have the hard drive partitioned into two drives, C: and E:. Both have Windows on them, but the E: drive is the main drive. When I reboot my computer, it asks me from which drive I want to start Windows. If I don't choose one, it automatically selects the C: drive, which is the one I always choose anyway. When I got the error message above, I inserted my XP CD, rebooted the computer, and booted Windows from the CD so I could try to repair it. I chose the repair option instead of the clean install option because I wanted to replace what I thought was just one missing or corrupt file. The software went through the process of what looked like a clean install, but I didn't think anything of it because I've used the repair option before and I seemed to recall this being the case and everything working out okay after it was done.
However, when my system rebooted automatically after the "repair" was done, and I chose to boot Windows from the C: drive, Windows loaded up as if it was a brand new install. Everything from my normal start up configuration was gone: all of my icons were gone, none of the programs that normally run on start up were executed, only one monitor of my multimonitor set up my four monitor setup was being displayed, etc. In addition, almost all of my devices were labeled as unknown devices in Device Manager. My cable modem wasn't recognized so I had no Internet connection (I'm writing this from my laptop, which has a wireless connection to the modem). When I looked at my directories, they all appeared to be intact along with the files they contained, except all of the files in the My Documents and My Pictures directories were gone. I suspect all of the files in other directories that are created when Windows is installed are probably gone as well. When I compared the Windows directories of the C: drive where the "repaired" install occurred and the E: drive, with which I had done nothing, I realized that I wasn't missing just one file, but several hundred files across multiple directories in the Windows directory on the E: drive. When I rebooted again and tried to start Windows from the E: drive, I got the same error message while Windows was loading that I got before I "repaired" Windows on the C: drive.
I called Dell tech support, but the person I got said he couldn't help me because Windows XP wasn't installed on the computer when I bought it. He seemed to imply that he knew the solution to my problem, but wasn't willing to help me at all because it was coporate policy, even after I pleaded with him that I was desperate. Oh, he was more than willing to help me if I had a problem with DOS, since that's the OS that came with the computer. After I begged him to help me, he actually had the nerve to snicker while he repeated like a corporate bot that he was very willing to help me with any DOS problems, as if this was a laughing matter. After that, I tried calling Microsoft, but they were closed. Is there any way I can restore my system to the way it was before all this happened? It will take me forever to figure out how to reestablish my Internet connection, reinstall all of my hardware (I didn't even get any "found new hardware" messages when Windows booted after my "repair") and software and then reinstall any upgrades to those. I am in dire straits here.
Where to get a complete list of WIN XP system commands? Like the cnfgsys and powercfg. Along with what they are used for, it would help out especiall when MS support for XP dries up.
View 1 Replies View Relatedtyping msconfig in the run box will not start up the utility. msconfig.exe is located in windows/pchealth, and nt servicepak uninstall. The pf files are located in windowsprefetch. how can I get the utility to run, sort of reloading xp.I have sp2 as well as all of the updates.all the other utilities run ok.
View 5 Replies View RelatedA Handy utility for speeding up system performance in Windows XP (or any version of Win9x/me for that matter as well) is the System Configuration Utility. To access the system configuration utility, go to Start and click Run. Type msconfig and click ok. Click the tab labeled Startup. Uncheck any items for which you do not care if they load when Windows loads or you do not have any idea what they are. In Windows XP, no items that are listed here are essential to Windows running properly, so feel free to experiment. After you removed everything you don't need, click apply and then ok.
View 9 Replies View RelatedI own a Sony VAIO VGN-FS742/W with XP Home SP2 running on it.For a week now, I've been trying to get the System Configuration Utility popup window to stop appearing everytime I bootup my machine.I've even gone as far as disable all of whats in STARTUP tab. Which didn't resolve a thing.Every time I click on radio buttom to not showup but it still does. Is there any kind of Registry Hack that can be done to stop this?
View 14 Replies View RelatedSystem Configuration Utility (startup tab) I have an entry, which specifies a location of HKLM SOFTWARE Microsoft Windows Current Version Run There is no startup item or command visable, what is it and how do I get rid of this entry if it's invalid. Or is this a valid entry?
View 5 Replies View Relatedi have xp home edition cd but do not have oem recovery cd. Can get to recovery console but don't know what to do.
View 1 Replies View RelatedI recently installed suse on my computer and I also have windows xp installed on a seperate partition. Since I am an idiot I was on windows xp and I decided to delete the suse partition trough windows. After I deleted the suse partition, I restarted windows and like ususal it said Grub loading, but I got an error because obviously suse is no longer there, so I put in the win xp disc and tried to repair windows. I thought if I deleted the 956 mb swap partition it would correct the system from trying to load Grub, but it actually made things worse and now I cannot even load the windows xp disc. Now when I try to load the xp disc it says inspecting system configuration then the screen goes blank.
View 8 Replies View RelatedI have just done a repair of xp things are just about right apart from a few item..SYSTEM CONFIGURATION UTILITY Always pops up from booting pc up on desktop I have clicked the bx but it still wants to pop up saying I have change some items on start up....I press don`t show me this again but on stsrt up it still pops up.Also slight delay from windows welcome screen to desk top about 30 secs configu msconfig to reduce ammmopunt in start up but still slow.
View 14 Replies View RelatedI recently had to use system config. to find a problem. I checked normal startup and restarted my computer.Now when I start my computer I get the System Config. Utility Screen telling me I have to set it for normal setup. How do I resolve this problem. I'm using XP Pro.
View 3 Replies View RelatedThe below message keeps showing up every time I start my computer. I checked to make sure the utility is set to normal mode, which it is, however it keep showing up."You have used the system configuration utility to make changes to the way windows starts.The system configuration utility is currently in diagnostic or selective startup mode, causing this message to be displayed and the utility to run every time windows starts.Choose the normal startup mode on the general tab to start windows normally and undo the changed made using the system configuration utility.
View 2 Replies View Relatedwhen I type in config in the run minue to open system configuration utility for xp configuration start tab does not appear therefore I can't get to the programs to uncheck the ones i want to disable. I get a system config folder. Is there any other way to open system configuration utility programs?
View 2 Replies View RelatedAfter running msconfig and using the selective startup mode, I rebooted and the System Configuration Utility screen keeps poping up and I have checked the box that tells it not to load.
View 3 Replies View RelatedDell Optiplex running WinXP Pro from a reinstallation, not OEM, At startup I always get a window telling me I have "used the System Configuration Utility to make changes to the way Windows starts", which is totally untrue.It then offers me a box to check to "Don't show this message or launch the System Configuration Utility when Windows starts". I haven't checked the box (yet) because I'm afraid I won't be able to ever launch the Utility. So my question is: if I check the box to keep ity from launching at startup, will I be able to run it later run/msconfig?
View 1 Replies View RelatedMy laptop has developed a problem where the System Configuration Utility dialog box appears at every boot. I'm running XP Home edition. This occurs even though I've selected "Normal" startup. Also, I can check the box to not show this dialog box again, yet it continues to appear. After appearing, it will tell me that I must reboot for the changes to become effective.
I've run spyware detectors and antivirus scanners but have come up with nothing. I downloaded a program Startup Monitor to see if it would identify anything. The message that I get upon boot with it is: "The program MSConfig has registered the executable C:WindowsPCHealthHelpCtrBinariesMSConfig.exe/auto to run at system startup"
after installing and uninstalling programs the startup folder in the system configuration utility becomes a mess. i was wondering if there is a way to clean it without reinstalling windows XP.
View 3 Replies View Related