I've changed the screen resolution from 800+ to 10000+ range and back to 800 several times. This so that a program I am using will fit the screen (10000) and back so icons and print on desktop are bigger. Now I can no longer get dsplay to open and can't do anything with the display. I'm using Windows XP
View 2 RepliesCan't change default Monotor for higher Resolution in XP?I have tryed Control Panel-Display-Settings-Advanced-Monitor Tab and I find the monitor properties are grayed out and monitor settings have no alternative choices.
View 10 Replies View RelatedWith a lot of help I've been able to fix the Control Panel>Display problem I had earlier.But now I have another problem. I started a new thread because it is a different problem, and because it may be a Viewsonic monitor or ATI screen driver problem rather than a Windows-XP problem.When I have the screen resolution set to 1024*768 the desktop fits neatly into the monitor.When I tried it at 1280*720 the desktop fits neatly into the monitor, but the graphics and text look as though they are stretched vertically - ie too tall for their width.When I tried it at 1280*768 the proportions looked right, but the desktop seems to have been moved up and to the left. That is, there is about a 2cm black band to the right of the display, between the right edge of the monitor and the right edge of the display; and there is about a 1cm black band below the desktop.When I tried it at 1280*800, just for completeness, the whole desktop seems to overlap the limits of the monitor. That is, the icons on the left are half hidden 'behind' the monitor, and the task bar at the bottom is barely in sight at the bottom edge of the monitor.I don't remember having this problem in the past, but it's been quite a while.
View 11 Replies View RelatedI have a problem when i start up my computer, if i have my screen resolution at 800x600 and i start my computer it will make the resolution the maximum (1600x1200) and it will make a black boarder that is like a quarter of the screen all around. Can this be because of a virus that messed something up?
View 2 Replies View RelatedInstalled win xp but unalble to change screen resolution from 640X480 pixels. Res. Color quality (medium 16bit). Slider will not move. Can’t change dpi setting.Posted using the http://www.windowsforumz.com interface,at author's request Articles individually checked for conformance to usenet standards Topic URL: http://www.windowsforumz.com/Video [...] 50570.html Visit Topic URL to contact author reg. req'd.
View 1 Replies View RelatedI have a Dell Dimension 2400, with Windows XP Home Edition. I installed Symantics PC Anywhere 9.2 and it reset my screen resolution to 640x480, I've tried to change it to original setting of 1024x768 but it won't let me change it.
View 4 Replies View RelatedSince installation of Home Ed with Service Pack 2 there have been no problems with this computer I decided to change the monitor resolution to make reading a little easier and did thid Control Panel/Display. Rebooted for changes to take effect and the normal Windows screen appeared (showing the progress bar) and then when I expected the 'Welcome' screen to appear all that I get is a small window showing the words
View 4 Replies View Relatedtrying to change the resolution to fit more on the screen but resolution bar will not slide in display settings
View 6 Replies View RelatedI cannot change the size of me screen resolution past 600x 480...or something like that. I have reinstalled windows and everything and i just cant get it to change.
View 3 Replies View RelatedI recently re-installed Windows XP on my Acer Aspire 5920 laptop. My only problem with it is that I can't set my screen resolution to the actual resolution of my screen (1280x800) since the only two options are 800x600 or 1024x768.The nVidia driver I got on the acer website wont install, saying:The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit.
View 5 Replies View RelatedI have just installed WXP PRO on a new (bigger) HDD in my Compaq D51SP225 computer but the screen resulution cannot be increased in control panel -- display.
I think I need a video driver but cannot install the internet connection because of thw resolution problem. All is well with this HDD. Can I download a suitable driver from the web to a CD or transfer this driver to a CD?
I had to replace my HD and Video card a couple of months ago. I got the new video card from Dell, it is the same card that my system came with, GeForce 7800 GO. Since replacing these two items, I cannot achieve my original screen resolution of 1920 X 1200(WUXGA), all I can get is 1400 X 900(WXGA). Yes, I am sure it is WUXGA, as shown by dell configurator : CF176 LIQUID CRYSTAL DISPLAY..., 17, Wide Ultra Extended Graphics Array..., VIDEO ELEC. STDS. ASSOC...., GLARE WIDE VIEWING ANGLE..., SAMSUNG...
View 2 Replies View RelatedI have a Compaq EVO D51S SFF which I had plugged to my LCD TV as a media centre, just to watch movies and all. I had not connected this computer to the internet because I did not have a wireless card.I finally installed a wireless card, and then windows started doing all sorts of updates as expected (since the version on the SFF was SP2).Once windows was done with the updates, I started having problems with the screen resolution.
The SFF does not have a stand alone video card, so I had set the resolution at 1024 x 768, and this worked just fine before the updates.Now, the resolution keeps changing and this is a problem because the LCD TV gives me a message saying "Resolution Not Supported", so I can't use the computer unless I connect it to a regular computer monitor, select 1024x768, and then connect to the TV. I connect via VGA port, not DVI (don't have DVI).
i messed around with it for a while changing zoom, stretch, dot to dot ect .Finnaly i got the tv's view mode to normal no stretch and filled all 32" perfectly with my desktop and the resolution was something like 2040x1200 or 1920x1080 not sure exactly..i should have wrote that down but close to that..
View 1 Replies View Relatedi just installed a new copy of windows xp pro. the screen resolution before the fresh istall was fine. i had all the options. i like my windows small. and now the only resolution i can get on is 1280x1024.. how can i fix this? do i need drivers?
View 9 Replies View RelatedThe video card on this computer would just cut out from time to time, and i'd to have re-set the cable for it to work. i figured theres a loose connection, so i got another video card to replace it with, since this is a work computer.So after installing the new (actually its a used video card, ASUS v7700 TIvx, but still definitely works) video card, the computer starts up at the correct resolution, 800x600. It looks fine, but when you drag anything or scroll on a web page, the video lags. So i found the correct drivers and installed them, and rebooted.
The computer reboots in 640x480 at 4-bit color quality. when i change the resolution to 800x600 at 32-bit color quality, it just defaults back to 640x480 at 4-bit. i found that i can change the resolution to 800x600 at 4-bit, but when i try 16-bit or 32-bit quality, it just go right back to 640x480 at 4-bit.i thought maybe it was the video card, and tried to install the old one again (its a geforce 2 mx card). so i re-install it and install the correct drivers, and still the same exact thing happens, (prior to any of this, the geforce 2 mx card worked fine at 800x600 at 32-bit) i can't get it to correctly change to 800x600 at 32bit, it just keeps defaulting back to 640x480 at 4-bit.
How can I change the resolution of Windows XP bootup screen? i.e.The screen of Windows XP logo with a blue moving bar(Change from 640x480 to a higher resolution)
View 2 Replies View RelatedCan a shortcut be created to access the change of screen resolution instead of desktop, properties, and settings? Or is there any other way to do it?
View 7 Replies View RelatedThis is confusing the heck out of me. on my screen is a black line approximately a pixel thick that runs horizontally over everything. When I change my screen resolution (changing it from 1280x1024 to 1152x864 and back again) it disappears.
It shows back up roughly about once week in differnt places (closer to bottom, closer to top, smack dab in the middle, etc.) This has been happening for months. Doesn't affect my work all that much. I am just a little curious as to what causes it.
I just reformatted my computer a Dell, Inspiron 8100, Windows XP home edition. Screen resolution default is 1600X1200 Pixels. I like 1024X768. When I change the resolution to 1024X768 or any other setting available the screen just gets smaller. There is no change in "Screen Resolution.
I have installed all the updates and SP2. Auto-updates seems to be doing fine. I downloaded new NiNida drivers from Dell, etc. I've removed and reinstalled the video drivers several times.
compaq presario 5000, 5BW130, new seagate hardrive, new install of windows xp sp2.My problem is I want to change the screen resolution, in display properties it won't let me move the slider it's set for 800 by 600 pixels, can't move it any further, color quality is: High 24 (bit) or medium (16 bit)that's it I want to make thing smaller what do I have to do, and what do I need??
View 2 Replies View RelatedRecently reinstalled Windows XP SP2 Home, due to a messed up Registry and upon reinstalling my screen resolution became 640 x 480 px, and whenever I try to change it, my computer won't let me. According to Microsoft.com, I have to install the driver for my monitor. I can easilly re-download the driver from the Dell website, but for some reason my computer won't let me go to Monitor settings. In order to install the monitor's driver I need to access this. Below is an image of the Advanced Display settings window when I open it. Note how the Monitor Properties is unclickable.
View 14 Replies View RelatedI have problems if I try and run the display settings above 800x600. I was wondering if this would be fixed if I upgrade the firmware settings and if so where would I get these upgrades? Whenever I try and run it at a higher display setting all I get is a thing saying "Signal isnt compatible with this display setting".
View 6 Replies View Relatedi played on windows xp pinball and after setting it to full screen i exited the game and found that my screen had rotated 90 degrees i have tried properties and screen display, also restarting the computer
View 3 Replies View RelatedI am unable to display a screen resolution of less than 1600 by 1200 Pixels correctly. Instead of filling the whole displayr I end up with a Window in the centre of the display that gets smaller as I change the screen resolution to less. I am using an IBM Thinkpat A22p and this problem occured just after I attached an external LCD Monitor.
View 1 Replies View RelatedI'm really bombed out when I have to scroll left to right on any web page. I love CNet forums, but it is a constant matter of that irritating scrolling that may make me stop using it. Yeah, I've tried adjusting my screen resolution, but then the type is so small it becomes a chore to read it. And, other websites designed to use my screen resolution look ridiculous in the browser. I don't care what "statistics" say about screen resolution,the vast majority of web sites are constructed to fit 800x600 res. Either that, or the web masters are smart enough to code them to fit various resolutions.
View 8 Replies View RelatedI just want to know how to change screen resolution in safe mode. The reason is when I try to use certain programs in safe mode, I can't view all the options and buttons of the program because it goes off the screen and resizing dosent help.I go to desktop properties and try to change it but the bar will not slide to any other position.
View 4 Replies View RelatedI have a HP 7965 computer. this morning the computer started having a resolution problem and it won't allow me to change the resolution. Also on the resolution page it shows a plug and play in lieu of a monitor. This computer is used mainly for computer games and internet. I thought about reformatting the hard drive since playing the medal of honor game sometimes the pc locks up but I can't find my restore cds.
View 8 Replies View RelatedI've installed and ran the XP-Administrator.exe file I did this thinking that the program allowed for toggling off the appearance of Administrator at the Welcome screen;but I have not found any instructions how to do the toggling.Can someone tell me where/how I may toggle the appearance of the Administrator user at the Welcome screen ?
View 7 Replies View RelatedI just bought a gateway media center computer 835gm with fpd1760 monitor 17". It came at 1024x768 setting for moniter. What are pros and cons of changing resolution to higher one? Max available is 1280x1024.
I know one downside of increasing resolution is I'll need to change sizes of fonts and icons etc. Will higher setting slow down the computer. Do you think higher setting will be preferable since I do a lot of digital photograpy work?
I changed the screen resolution on my xp machine now all i get after the login screen is a black one.I have tried changing in safe mode but it does not change
View 1 Replies View Related