Higher Screen Resolution Moves Display
Jan 7, 2009
With a lot of help I've been able to fix the Control Panel>Display problem I had earlier.But now I have another problem. I started a new thread because it is a different problem, and because it may be a Viewsonic monitor or ATI screen driver problem rather than a Windows-XP problem.When I have the screen resolution set to 1024*768 the desktop fits neatly into the monitor.When I tried it at 1280*720 the desktop fits neatly into the monitor, but the graphics and text look as though they are stretched vertically - ie too tall for their width.When I tried it at 1280*768 the proportions looked right, but the desktop seems to have been moved up and to the left. That is, there is about a 2cm black band to the right of the display, between the right edge of the monitor and the right edge of the display; and there is about a 1cm black band below the desktop.When I tried it at 1280*800, just for completeness, the whole desktop seems to overlap the limits of the monitor. That is, the icons on the left are half hidden 'behind' the monitor, and the task bar at the bottom is barely in sight at the bottom edge of the monitor.I don't remember having this problem in the past, but it's been quite a while.
View 11 Replies
ADVERTISEMENT
Jun 28, 2010
I have problems if I try and run the display settings above 800x600. I was wondering if this would be fixed if I upgrade the firmware settings and if so where would I get these upgrades? Whenever I try and run it at a higher display setting all I get is a thing saying "Signal isnt compatible with this display setting".
View 6 Replies
View Related
Aug 11, 2005
I have a problem when i start up my computer, if i have my screen resolution at 800x600 and i start my computer it will make the resolution the maximum (1600x1200) and it will make a black boarder that is like a quarter of the screen all around. Can this be because of a virus that messed something up?
View 2 Replies
View Related
Jun 20, 2005
I've changed the screen resolution from 800+ to 10000+ range and back to 800 several times. This so that a program I am using will fit the screen (10000) and back so icons and print on desktop are bigger. Now I can no longer get dsplay to open and can't do anything with the display. I'm using Windows XP
View 2 Replies
View Related
Aug 28, 2009
Can't change default Monotor for higher Resolution in XP?I have tryed Control Panel-Display-Settings-Advanced-Monitor Tab and I find the monitor properties are grayed out and monitor settings have no alternative choices.
View 10 Replies
View Related
Feb 23, 2006
1: Because of my eyesite I always have my screen resolution set at 640 by 480. On the computer with XP it is not avalible. Is there different drivers or a program that will let me make 640 by 480 avalable? If so how do I go about this?
2: I have 2 computers that are virtually the same. Both have XP Pro opperating system. I am the webmaster for a couple of sites. there is a menu at the left of the site. On one computer the menu will display on the other is will not. The menue is an applet code . Is there a setting on the second computer that I am missing to display this menue?
3: for years I used Norton. When I loaded XP I used it a day or so and then loaded Norton on that PC. It slowed it down very much. So much that I took it back off. Now I need a suggestion on what virus scan will be as good as Norton but not slow my PC down so much.
View 6 Replies
View Related
Jun 28, 2005
Installed win xp but unalble to change screen resolution from 640X480 pixels. Res. Color quality (medium 16bit). Slider will not move. Can’t change dpi setting.Posted using the http://www.windowsforumz.com interface,at author's request Articles individually checked for conformance to usenet standards Topic URL: http://www.windowsforumz.com/Video [...] 50570.html Visit Topic URL to contact author reg. req'd.
View 1 Replies
View Related
Aug 25, 2008
trying to change the resolution to fit more on the screen but resolution bar will not slide in display settings
View 6 Replies
View Related
Feb 24, 2008
compaq presario 5000, 5BW130, new seagate hardrive, new install of windows xp sp2.My problem is I want to change the screen resolution, in display properties it won't let me move the slider it's set for 800 by 600 pixels, can't move it any further, color quality is: High 24 (bit) or medium (16 bit)that's it I want to make thing smaller what do I have to do, and what do I need??
View 2 Replies
View Related
Aug 6, 2005
I am unable to display a screen resolution of less than 1600 by 1200 Pixels correctly. Instead of filling the whole displayr I end up with a Window in the centre of the display that gets smaller as I change the screen resolution to less. I am using an IBM Thinkpat A22p and this problem occured just after I attached an external LCD Monitor.
View 1 Replies
View Related
Jun 28, 2005
the cursor moves across the screen by itself and I notice if I pick the mouse up then lightly dump it onto the mouse pad the cursor will begin moving across the screen again.This may not have anything to do with the cursor but I can not sign out of this newsgroup.
View 7 Replies
View Related
Dec 25, 2007
when I scroll down the screen on a webpage the screen has a juddering jerky quality and moves pretty slowly,
View 6 Replies
View Related
Jun 21, 2006
I was restarting my computer and right after I restarted my computer the resolution was as low as it could be and my display(graphics) setting was very, very low. so low that it is using like 4 bit color and stuff. And I went into display properties and changd my res and my color bit back to the highest,but it wouldnt change, but yet again it said the highest was like 32 bit and im pretty sure there was 256 or something higher.
View 11 Replies
View Related
Jul 26, 2009
Anyone having problems with resolution settings nvidia display.
View 10 Replies
View Related
Jun 21, 2006
A problem regarding desktop display settings. When the desktop resolution is set to 1024x768, everything is perfect. However, when I change the resolution to 800x600, everything is very bad quality such as text and images.This corruption also affects fullscreen applications that run in a lower resolution than 1024x768.
View 7 Replies
View Related
Dec 20, 2006
browsing web sites, and right before my eyes (not even a screen flicker) the display widens, while the resolution remains the same; looks like my monitor needs to be a few inches wider on each side to fit it all. "That's weird," I thought, and went and tried to fix the display as per usual...no dice. Reboot, no dice. While rebooting, I noted that the startup BIOS info was wide too, and not fitting on the screen...I booted up Ubuntu Linux just to see, and it works just fine...so
View 5 Replies
View Related
Jul 23, 2005
I just reformatted my computer a Dell, Inspiron 8100, Windows XP home edition. Screen resolution default is 1600X1200 Pixels. I like 1024X768. When I change the resolution to 1024X768 or any other setting available the screen just gets smaller. There is no change in "Screen Resolution.
I have installed all the updates and SP2. Auto-updates seems to be doing fine. I downloaded new NiNida drivers from Dell, etc. I've removed and reinstalled the video drivers several times.
View 1 Replies
View Related
Aug 9, 2005
I just bought a gateway media center computer 835gm with fpd1760 monitor 17". It came at 1024x768 setting for moniter. What are pros and cons of changing resolution to higher one? Max available is 1280x1024.
I know one downside of increasing resolution is I'll need to change sizes of fonts and icons etc. Will higher setting slow down the computer. Do you think higher setting will be preferable since I do a lot of digital photograpy work?
View 6 Replies
View Related
Jun 2, 2008
I changed the screen resolution on my xp machine now all i get after the login screen is a black one.I have tried changing in safe mode but it does not change
View 1 Replies
View Related
Aug 19, 2005
My PC is a Dell Dimension 4600, using Windows XP Home Edition. I had problems getting online, Comcast Tech came out to help, no help from them, found out myself that somewhere I had lost a driver, reinstalled, back on line, but with problems. I cannot seem to get the screen resolutions to look like I want it to. The following is what I have and it looks great, but does not fill screen and letters so small. DISPLAY PROPERTIES: Themes-Windows Classic Modified. APPEARANCE: Windows classic Style. COLOR SCHEME: Same as above.
FONT: Normal. When I click on Screen Resolution Tab it shows the following: 1280 by 1024 Pixels, Color Highest 32 bit. As I stated above, it really is so clear, (letters, etc), but does not fill screen. Also, when Tech was here he installed WindowsXP again, so now I have two of the same and the fact that they take up so much space, I had bought "The Print Shop" before all this happened and now I cannot not install.
View 6 Replies
View Related
Apr 8, 2008
I just upgraded my Dell 4300 XP Home Edition to SP2. When it rebooted, the welcome screen was in blue and white instead of its usual color rich format and the background resolution was really poor quality.A window popped up and informed me that my settings were set too low and asked whether I wanted Windows to auto correct the problem. I clicked "yes", but nothing was resolved.
View 6 Replies
View Related
Dec 28, 2005
I am having issues with my Screen Resolution. Everytime I log into Windows it defaults the settings to the lowest possible settings, 640x480 ( 8 bit ). I change the Settings back to what I like, restart the computer and it will login with my settings then the screen will go blank for a couple seconds and reset to the lowest settings again. How can I fix this?
View 6 Replies
View Related
Nov 4, 2005
My Windows XP (SP2) screen display is set for 32 bit color. Whenever I open Outlook (Office 2003 with all updates installed), the screen blanks, then reloads with 8 bit color. If I change it to 32 bit while Outlook is open, after about 30 seconds, the same blank-reload happens. When I exit Outlook, the sequence reverses, (blank -32 bit reloads). I have tried resetting my display resolution, from every program, nothing works. Interestingly, changing from a CRT to an LCD monitor has made no difference at all.
View 6 Replies
View Related
Apr 14, 2007
i just installed a new copy of windows xp pro. the screen resolution before the fresh istall was fine. i had all the options. i like my windows small. and now the only resolution i can get on is 1280x1024.. how can i fix this? do i need drivers?
View 9 Replies
View Related
Aug 10, 2005
I am struggling with the best options for the LCD screen on my Dell laptop which has a NVIDIA GeForce2 Go video card.The ideal resolution setting for this video card and screen is apparently 1600 x 1200, but that makes things too small for me. So I learned about the dpi setting in Display PropertiesSettingsAdvanced screen. However since this magnifies things for the same resolution, I am not sure why that is better than just using a lower resolution or even what the difference between the 2 options is.
View 9 Replies
View Related
Jul 27, 2005
I just got done reinstalling XP and now am having a few problems. I can't seem to be able to adjust the screen resolution/color. I don't have any sound. And I get messages about errors in the regisitry telling me to go to http://fixreg32.com to fix them (spyware?).
View 4 Replies
View Related
Oct 8, 2008
The video card on this computer would just cut out from time to time, and i'd to have re-set the cable for it to work. i figured theres a loose connection, so i got another video card to replace it with, since this is a work computer.So after installing the new (actually its a used video card, ASUS v7700 TIvx, but still definitely works) video card, the computer starts up at the correct resolution, 800x600. It looks fine, but when you drag anything or scroll on a web page, the video lags. So i found the correct drivers and installed them, and rebooted.
The computer reboots in 640x480 at 4-bit color quality. when i change the resolution to 800x600 at 32-bit color quality, it just defaults back to 640x480 at 4-bit. i found that i can change the resolution to 800x600 at 4-bit, but when i try 16-bit or 32-bit quality, it just go right back to 640x480 at 4-bit.i thought maybe it was the video card, and tried to install the old one again (its a geforce 2 mx card). so i re-install it and install the correct drivers, and still the same exact thing happens, (prior to any of this, the geforce 2 mx card worked fine at 800x600 at 32-bit) i can't get it to correctly change to 800x600 at 32bit, it just keeps defaulting back to 640x480 at 4-bit.
View 8 Replies
View Related
Apr 12, 2008
I updated Windows XP to Service Pack 2 yesterday. After installing and re-booting, the screen resolution and the colours of my monitor have changed (big icons and only four colours), which makes it look like it was in Safe Mode (which it isn't).I have tried to change the screen resolution and the colours under Display properties - Settings, but it only gives me the option of a screen resolution of "640x480 pixels" (the slider won't move) and colour quality of "Lowest 4 bit".I presumed it was a driver issue so I have tried to uninstall the graphics controller in the device manager and re-install it with the latest driver.
View 7 Replies
View Related
Aug 13, 2005
all (after reboot it defaults back to the 4bit VGA), so I am using the xp driver(nv4_disp.dll). This works well except that there is a 1inch gap on the right of the screen that isn't being used. The resolution is 1024x768 and when i move my mouse to the right edge it scrolls the screen over. I know that part of the screen works because when it boots there is writing right up to the edge. I have tried 800x600 and it does the same thing.
View 4 Replies
View Related
Oct 19, 2009
Now for the problem: every time I restart my computer or maybe just close and open it again after a hour, the screen resolution is at 800x600I keep resetting the resolution to 1024x768 (that's the highest resolution my laptop can take without me having to scroll down to the start menu), but the computer just resets itself everything I turn it off. It's as if I did nothing. I'm pressing the "Apply" and "OK" buttons in the window, and I can't figure out if there's something else I should be doing.
View 1 Replies
View Related
Feb 18, 2009
I'm having trouble either writing code for or finding a freeware utillity to read the current screen resolution.I need it to be accurate, and I need the resolution to be output in the format: {Friendly Name} {width} {height} {color depth} {refresh rate}I should probably have it list all of this one line each, output to standard output.
View 9 Replies
View Related
